Microchip Technology

PIC16F1768-I/P - 32MHz 8-Bit MCU with 10-Bit DAC | Microchip

MPN: PIC16F1768-I/P ✓ فعال
2.3 V to 5.5 V Vdss Supported Id 20-pin PDIP Package 32 MHz Speed 7 KB (4K × 14 words) Memory
حداقل سفارش: 1 |

PIC16F1768-I/P نمای کلی

The Microchip Technology PIC16F1768-I/P is an 8-bit PIC16(L)F176X microcontroller operating at up to 32 MHz, with 7 KB of Flash memory organized as 4K × 14 words, 512 bytes of RAM, and a 10-bit DAC. It is packaged in a 20-pin PDIP and operates from 2.3 V to 5.5 V. The -I suffix identifies the industrial-temperature grade, while /P denotes the through-hole PDIP package.

A PIC16 microcontroller combines a compact RISC-based processor, Flash program memory, RAM, and configurable peripherals on one integrated circuit. The PIC16F176X family belongs to the broader hierarchy of 8-bit Flash microcontrollers, embedded processors, and semiconductor devices used for compact control systems. Its combination of digital peripherals and analog functions allows one device to supervise sensors, process logic, generate or measure analog signals, and control outputs.

Key features include a 10-bit DAC, 10-bit A/D converter, operational amplifiers, zero-cross detection, and high-current I/O. The 32 MHz operating speed provides additional processing headroom for control loops and communication routines, while the 4K × 14-word Flash organization supports 14-bit instruction storage. The 2.3 V minimum operating voltage supports low-voltage designs, although feature availability and clock configuration should be checked against the manufacturer datasheet.

The PIC16(L)F176X architecture integrates digital and analog functions intended to reduce the number of external components in industrial, consumer, and embedded-control products. The 512-byte RAM supports working variables and data buffers, while the dedicated DAC can provide a controlled analog output where an internal peripheral is preferable to an external converter. Because internal analog resources can share pins with digital I/O, the pin assignment and alternate-function selections must be reviewed before finalizing the PCB.

Typical applications include industrial control panels, sensor interfaces, low-speed data acquisition, motor and relay control, temperature measurement, and compact analog monitoring systems. The device can also support UART-based communications where the selected I/O mapping provides the required serial functions. Its 20-pin PDIP package is particularly useful for prototypes, educational platforms, through-hole assemblies, and designs that favor easy inspection and rework.

For a new PCB, reserve decoupling close to the supply pins, connect the programming and programming-mode pins according to the manufacturer guidance, and verify oscillator, reset, analog-reference, and I/O constraints. The DIP package is not intended to provide the compact board area or thermal performance of a surface-mount QFN or SOIC implementation, so final package choice should follow mechanical and production requirements.

This product overview combines the manufacturer family information with procurement, package, and application guidance. It also provides verified drop-in comparison points and practical considerations for firmware support, analog signal conditioning, PCB layout, lifecycle planning, and sourcing without requiring engineers to reconstruct the design context from separate documents.

جایگزین‌های drop-in برای PIC16F1768-I/P — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC16F1768-I/P (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Data RAM, ADC, ADC Resolution, Core Architecture.

Microchip Technology
Package: 20-pin PDIP (P), 0.300 inch / 7.62mm
Data RAM: 1024 bytes
ADC: 10-bit, up to 12 channels, with Computation (ADC2)
Microchip Technology
Package: 20-pin PDIP (P)
Data RAM: 256 bytes
ADC: 10-bit
Microchip Technology
Package: 20-pin PDIP (0.300 inch / 7.62 mm)
Data RAM: 1 KB
ADC: 10-bit
Microchip Technology
Package: 20-pin DIP (P package)
ADC Resolution: 10 bit

PIC16F1768-E/P

✅ جایگزین مستقیم
Microchip Technology
📦 20-pin PDIP
PIC16 enhanced mid-range 8-bit · 14-bit · 32 MHz · 8 MIPS · 7 KB (4K x 14 words) · 256 bytes · 2.3 V to 5.5 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

PIC16F1768-I/P حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 8-bit Flash microcontroller
حداکثر فرکانس کلاک 32 MHz
Flash Memory 7 KB (4K × 14 words)
RAM 512 bytes
ADC Resolution 10-bit
DAC Resolution 10-bit
Supply Voltage Range 2.3 V to 5.5 V
Temperature Grade Industrial
بسته‌بندی 20-pin PDIP
نوع نصب Through-hole
Operational Amplifier Count 2
Zero-Cross Detection Supported
High-Current I/O Supported
Program Memory Type Flash
Instruction Word Size 14-bit
وضعیت RoHS Compliant
تعداد پین‌ها 20
Total Program Memory 7 KB
Data Memory 512 bytes
Manufacturer Family PIC16(L)F176X

راهنمای پیکربندی پین PIC16F1768-I/P 20-pin pdip

پیکربندی پین برای PIC16F1768-I/P (پکیج 20-pin pdip). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 20-pin pdip برای PIC16F1768-I/P

داده پین‌آوت تفصیلی موجود نیست برای PIC16F1768-I/P.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

PIC16F1768-I/P مناسب است برای 6 کاربردs: Industrial Sensor Monitoring, Compact Data Acquisition Controller, Relay and Switching Control, Industrial Control Panel, Motor and Actuator Control, Educational and Prototype Platform.

🏭

Industrial Sensor Monitoring

PIC16F1768-I/P fits compact industrial sensor-monitoring equipment because it combines a 10-bit A/D converter, two operational amplifiers, 32 MHz processing, 7 KB of Flash, and 512 bytes of RAM in one 20-pin PDIP device. The MCU can acquire analog sensor signals, apply filtering or calibration, evaluate thresholds, and operate control outputs without requiring separate analog-conditioning ICs. Its 2.3 V to 5.5 V operating range also supports low-voltage sensing systems. Designers should confirm analog-reference limits, input common-mode requirements, and channel multiplexing in the manufacturer datasheet before finalizing the front end.

📊

Compact Data Acquisition Controller

PIC16F1768-I/P can serve as the acquisition and processing controller in a small measurement system requiring an A/D converter, local control, and digital reporting. The 10-bit conversion channel supports moderate-resolution measurements, while the 4K × 14-word Flash organization holds acquisition routines and configuration logic. Firmware can sample at scheduled intervals, apply calibration, flag thresholds, and forward results through an available serial interface. Check the exact conversion timing, acquisition path, and peripheral pin assignments in the Microchip datasheet because multiplexed analog and digital resources must be configured consistently.

⚡

Relay and Switching Control

PIC16F1768-I/P is appropriate for relay, lamp, and general switching-control boards because its integrated high-current I/O can reduce the number of external driver stages in suitable designs. The 32 MHz core provides timing headroom for debounce, interlocks, sequencing, diagnostics, and communication routines, while 512 bytes of RAM can hold state variables and timing information. The 20-pin PDIP format also simplifies prototype assembly and bench rework. Verify each I/O pin's source, sink, voltage, and thermal limits in the datasheet, and provide appropriate protection for inductive or capacitive loads.

🔧

Industrial Control Panel

PIC16F1768-I/P can implement the local logic for an industrial control panel containing status indicators, pushbuttons, setpoints, and discrete outputs. Its integrated analog features permit direct supervision of potentiometers, dividers, or sensor interfaces, and the 7 KB Flash space accommodates state-machine logic and configuration tables. The device manages panel sequencing while its zero-cross detection and high-current I/O support selected signal-conditioning or drive functions. Production designs should define startup behavior, pin reset states, ESD requirements, and isolation boundaries before selecting final external hardware.

🤖

Motor and Actuator Control

PIC16F1768-I/P can coordinate low-power motor, valve, or actuator control functions where an 8-bit controller, 32 MHz clock, and integrated analog peripherals provide adequate response time. Its operational amplifiers can support limited signal-conditioning tasks, while the 10-bit A/D converter can monitor current, position, temperature, or analog command inputs. Firmware can implement acceleration profiles, travel limits, stall detection, and fault reporting. External drivers are still required for most motors, and the controller's pins must not be used beyond their absolute maximum ratings or drive requirements.

🧩

Educational and Prototype Platform

PIC16F1768-I/P is well suited to microcontroller training, breadboard prototypes, and evaluation boards because it uses a readily accessible 20-pin PDIP package. The 8-bit architecture, 32 MHz clock, 7 KB Flash, 512 bytes of RAM, 10-bit ADC, 10-bit DAC, and operational amplifiers provide enough capability for foundational exercises in digital control, analog measurement, interrupt handling, and peripheral integration. Through-hole construction also makes individual signal probing and board-level debugging easier. Select the appropriate programming interface and oscillator arrangement, and follow the manufacturer startup and configuration requirements.

What are the key specifications of PIC16F1768-I/P that engineers should know?
The PIC16F1768-I/P is an 8-bit Flash microcontroller rated up to 32 MHz, with 7 KB of program memory, 512 bytes of RAM, and a 10-bit DAC in a 20-pin PDIP package. According to the Microchip PIC16F1768 product page, the family also integrates a 10-bit A/D converter, operational amplifiers, zero-cross detection, and high-current I/O. Its 2.3 V to 5.5 V operating range and industrial temperature designation make it suitable for compact embedded-control and analog-monitoring designs that use a through-hole footprint.
What is the operating voltage of PIC16F1768-I/P?
The PIC16F1768-I/P operates from 2.3 V to 5.5 V. This range is identified on the Microchip PIC16F1768-I/P distributor listing and supports both low-voltage and conventional 5 V equipment designs. The selected clock configuration, analog peripherals, and output-drive requirements should still be checked against the manufacturer datasheet. In particular, verify the operating limits of any communication peripheral or analog function before committing the supply rail to the final design.
Where can I download the PIC16F1768-I/P datasheet PDF?
The official PIC16F1768 datasheet can be obtained from the Microchip Technology PIC16F1768 product page, which links to the manufacturer documentation for the PIC16(L)F176X family. Use that document for the authoritative pin descriptions, electrical characteristics, memory map, peripheral operation, programming instructions, and package drawings. The manufacturer page is the preferred starting point because the family documentation covers the PIC16F1768 alongside closely related 14-pin and 20-pin devices.
Where can I find the PIC16F1768-I/P pinout?
The PIC16F1768-I/P pinout is defined in the pin-description and package-drawing sections of the Microchip PIC16(L)F176X manufacturer datasheet. The device uses a 20-pin PDIP outline, so the physical pin numbering follows the standard counterclockwise numbering of a dual in-line package. Use the datasheet when assigning analog inputs, I/O, power, ground, programming, reset, and clock functions because several pins can have alternate peripheral functions.
Can PIC16F1768-E/P replace PIC16F1768-I/P as a drop-in part?
The PIC16F1768-E/P is the closest documented drop-in candidate because it retains the same PIC16F1768 device configuration and 20-pin PDIP package. Its main distinction is temperature grade: the -E version is intended for extended-temperature use, while the -I version is the industrial-grade ordering option. According to Microchip ordering information, the -E part provides a higher upper temperature limit. Verify that the production environment remains within both the temperature and electrical limits before approving the substitution.
What can replace PIC16F1768-I/P?
PIC16F1768-E/P is the direct drop-in candidate for PIC16F1768-I/P when the higher-temperature -E grade is acceptable and the board uses the same 20-pin PDIP footprint. No pin-compatible cross-brand MCU with confirmed electrical equivalence was established for this device. A different controller should be treated as a redesign unless its pinout, memory, analog peripherals, interrupt behavior, programming toolchain, and operating limits have all been validated against the existing PCB and firmware.
Is PIC16F1768-E/P the same as PIC16F1768-I/P?
PIC16F1768-E/P and PIC16F1768-I/P use the same PIC16F1768 base device and 20-pin PDIP package, but their temperature-grade suffixes differ. The -I ordering option is designated for industrial temperature, whereas the -E ordering option supports extended temperature. The -E version can therefore serve as a drop-in alternative when its thermal specification is suitable. Confirm the exact temperature limits, operating-rate restrictions, and qualification requirements in the Microchip ordering information before releasing the substitution for production.
PIC16F1768-I/P vs PIC16F1768-E/P - which is better for industrial equipment?
PIC16F1768-I/P is the appropriate standard choice for ordinary industrial equipment, while PIC16F1768-E/P offers the extended-temperature option. Both provide the same 8-bit PIC16F1768 core, 32 MHz maximum clock, 7 KB Flash memory, 512 bytes of RAM, 10-bit A/D conversion, and 10-bit DAC in a 20-pin PDIP package. The selection should follow the enclosure's measured temperature range: use the -I grade when it has adequate margin and the -E grade when the installation exceeds the standard industrial upper limit.
When should I choose PIC16F1768-I/P over PIC16F1768-E/P?
Choose PIC16F1768-I/P when the assembly will remain inside the industrial temperature range and does not require the extended-temperature designation. The device combines a 32 MHz clock, 7 KB of Flash, 512 bytes of RAM, 10-bit conversion functions, and integrated operational amplifiers in an easy-to-probe 20-pin through-hole package. Choose PIC16F1768-E/P instead when ambient or enclosure temperatures exceed the -I grade's upper limit, after confirming that the extended-grade operating limits meet the product's worst-case requirements.
Is PIC16F1768-I/P suitable for analog sensor monitoring?
PIC16F1768-I/P is suitable for compact analog sensor-monitoring systems because it combines a 10-bit A/D converter, 10-bit DAC, operational amplifiers, and high-current I/O on the same microcontroller. According to the Microchip family information, the device also includes zero-cross detection for suitable AC-related signal functions. The analog inputs must remain within the datasheet's reference and input-voltage limits, and firmware should configure unused channels and alternate-function pins correctly to prevent unintended digital activity.
How much memory does PIC16F1768-I/P have?
PIC16F1768-I/P has 7 KB of Flash program memory organized as 4K × 14 words and 512 bytes of data RAM. The 14-bit organization matches the PIC16F1768's instruction architecture, while the 8-bit processor provides byte-oriented data handling. These resources support embedded control state machines, peripheral configuration, communication routines, and signal-processing tasks. Developers should reserve memory for boot configuration and application requirements and check the manufacturer's memory map for register and addressing details.
What is the lead time for PIC16F1768-I/P?
Current lead time and scheduled delivery should be requested through the Request a Quote form on this page. The -I and /P ordering codes identify the industrial-temperature, 20-pin PDIP configuration, so include both codes in the request to avoid a package or grade mismatch. For production planning, ask for the current stock position, minimum order quantity, factory lead time, and date-code status. Packaging details should also be confirmed because the PDIP option is supplied differently from surface-mount versions of the same family.
Is PIC16F1768-I/P in stock?
Use the Request a Quote form on this page to check the current availability, quantity, and expected shipment schedule for PIC16F1768-I/P. Current catalog and distributor listings indicate that the device is actively offered, but live inventory can change independently of product lifecycle status. Include the exact MPN PIC16F1768-I/P and the required PDIP delivery format in the request. This avoids confusion with the -SS, -ML, and /SO package variants of the PIC16F1768 family.
Where to buy PIC16F1768-I/P online?
Request a quotation for PIC16F1768-I/P through the Request a Quote form on this page. Provide the target quantity, desired tube or tray packing, shipment destination, and required production date. The exact ordering code matters because the /P suffix denotes the 20-pin PDIP package, while other suffixes identify surface-mount packages. The manufacturer product page is also available for technical documentation, but this page provides the route for current commercial availability, lot traceability, and delivery confirmation.
What is the best cross-brand equivalent for PIC16F1768-I/P?
No cross-brand equivalent has been confirmed as a drop-in replacement for PIC16F1768-I/P. A credible substitute must match the 20-pin PDIP footprint, 2.3 V to 5.5 V operating range, Flash and RAM requirements, analog peripherals, I/O behavior, programming method, and application timing. Microchip cross-reference tools can identify comparable devices, but comparable functionality does not guarantee pin compatibility. Treat any cross-brand selection as a hardware and firmware redesign unless qualification documents establish complete interchangeability.

داده‌های مرجع مهندسی برای PIC16F1768-I/P — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose PIC16F1768-I/P for compact embedded-control, analog-monitoring, and prototype designs that need a 32 MHz 8-bit MCU, 7 KB Flash, 512 bytes of RAM, 10-bit conversion functions, and an easy-to-access 20-pin PDIP footprint. Choose PIC16F1768-E/P when the same pin and peripheral configuration is needed but the installation requires the extended-temperature option. Do not substitute PIC16F1768-I/ML or PIC16F1768T-I/SO on an existing board: both use different packages and pin arrangements despite belonging to the same controller family. No confirmed cross-brand drop-in equivalent was identified, so another manufacturer's MCU should be selected only after its footprint, analog resources, memory map, interrupt behavior, timing, and programming workflow have been validated. For new high-volume surface-mount products, evaluate a smaller package from the PIC16F1768 family after checking the required pin multiplexing and board-layout implications.

مقایسه با جایگزین‌ها

پارامتر این محصول PIC16F1768-E/P
Brand Microchip Technology Microchip Technology
Package 20-pin PDIP 20-pin PDIP
Processor Architecture 8-bit PIC16 8-bit PIC16
Maximum Clock Frequency 32 MHz 32 MHz
Flash Memory 7 KB (4K × 14 words) 7 KB (4K × 14 words)
RAM 512 bytes 512 bytes
ADC Resolution 10-bit 10-bit
DAC Resolution 10-bit 10-bit
Supply Voltage Range 2.3 V to 5.5 V 2.3 V to 5.5 V
Temperature Grade Industrial (-I) Extended (-E)

تفاوت‌های کلیدی

  • Integrated analog resources reduce external component count (در مقابلPIC16F1768-E/P)
  • High clock speed with compact memory footprint (در مقابلPIC16F1768-E/P)
  • Through-hole construction supports accessible assembly and inspection (در مقابلPIC16F1768-I/ML)

یادداشت‌های طراحی

Place the device's supply-decoupling capacitor immediately adjacent to the appropriate power and ground pins, with a short and low-inductance return path. Keep analog inputs and the analog reference routing away from switching nodes, relay-driver traces, and high-current output paths. Because several pins can support both digital I/O and analog functions, review the final pin-multiplexing configuration in the Microchip datasheet before freezing the PCB layout.

Design the 2.3 V to 5.5 V supply rail so it remains within the limits required by the selected operating speed, analog functions, I/O loads, and attached peripherals. Include local bulk storage for transients and adequate local bypass at the device. Before powering the board, verify that no external peripheral can back-drive an I/O pin through protection diodes, especially when the controller is unpowered or held in reset.

Do not treat SOIC, QFN, SSOP, and PDIP versions as interchangeable. PIC16F1768T-I/SO, PIC16F1768-I/SS, and PIC16F1768-I/ML use different packages and pin assignments from PIC16F1768-I/P. Confirm the complete ordering code, programming interface, oscillator arrangement, and package drawing on every procurement document. Mixing the /P and /ML variants can cause assembly, firmware-programming, and hardware-debugging errors.

Use the internal ADC and DAC only after validating the analog-reference stability, input bandwidth, sample-and-hold behavior, and acquisition timing required by the signal chain. Route sensitive analog inputs away from the high-current I/O and programming interfaces. When zero-cross or op-amp functions are used, preserve the recommended input and output topology, including any required feedback components and source impedances identified in the manufacturer documentation.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The RoHS-compliant status is identified on the Microchip PIC16F1768-I/P product listing. No qualification claim is made for REACH, AEC-Q100, lead-free finish, halogen-free construction, or conflict-minerals compliance without an explicit manufacturer statement.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

PIC16F1768-I/P datasheet PIC16F1768-I/P datasheet pdf PIC16F1768-I/P pinout PIC16F1768-I/P equivalent PIC16F1768-I/P replacement PIC16F1768-I/P cross reference PIC16F1768-I/P price PIC16F1768-I/P stock Microchip PIC16F1768-I/P PIC16F1768 32MHz 10-bit DAC PIC16F1768 20-pin PDIP pinout PIC16F1768 industrial sensor monitoring PIC16F1768-I/P vs PIC16F1768-E/P

قطعات و اصطلاحات مرتبط

Microchip Technology PIC16F1768-I/P PIC16F1768-E/P PIC16F1768-I/SS PIC16F1768-I/ML PIC16F1768T-I/SO PIC16(L)F176X PIC16 8-bit microcontroller Flash microcontroller RISC processor embedded controller 10-bit ADC 10-bit DAC operational amplifier zero-cross detection high-current I/O 32 MHz clock 7 KB Flash memory 512 bytes RAM 2.3 V to 5.5 V 20-pin PDIP industrial temperature grade RoHS
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ