PIC16F716-I/P - 8-Bit 20 MHz Flash MCU | Microchip
MPN: PIC16F716-I/P ✓ فعالPIC16F716-I/P نمای کلی
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals on one chip. The PIC16F716 belongs to the PIC16 family of 8-bit flash-based microcontrollers, which sits within the broader embedded-controller and semiconductor hierarchy. Its role is to read sensors, execute control logic, operate timers, and drive digital or analog output stages in compact appliances, industrial controls, automotive subsystems, and consumer equipment.
Key verified features include four channels of 8-bit analog-to-digital conversion, two additional timers, and enhanced capture/compare/PWM support. The 20 MHz clock gives embedded designs more timing headroom than lower-speed PIC devices, while the 3.5 KB Flash capacity supports a 2K x 14 program organization. The 13 I/O pins provide connections for sensors, switches, displays, actuators, and control signals. The exact operating-temperature grade encoded by the “-I” suffix is not stated in the supplied snippets and requires datasheet confirmation.
The PIC16F716 uses an enhanced mid-range PIC16 instruction set, with the verified distributor material describing 200 ns instruction execution and 35 single-word instructions. Flash memory supports in-system reprogramming-oriented designs, although programming voltage, configuration-protection details, and oscillator options must be taken from the complete manufacturer datasheet. The four-channel converter is especially useful when an application must monitor several analog inputs without adding a separate ADC.
Typical uses include appliance control, industrial sensing, automotive interface modules, small motor or valve controllers, and consumer-product logic boards. For analog control, the MCU can sample sensors and use PWM outputs to regulate a load; for digital control, its 13 I/O lines can coordinate switches, indicators, relays, and communication peripherals. The 18-pin PDIP package is easy to prototype and inspect, although it occupies more board area than surface-mount options.
When designing around the PIC16F716-I/P, preserve adequate decoupling near VDD and VSS, route analog inputs away from fast-switching nodes, and verify the external oscillator network against the selected timing mode. Confirm the exact pin multiplexing, electrical limits, and programming requirements from the Microchip PIC16F716 datasheet before layout release. This page combines verified distributor specifications, official product information, practical application context, and sourcing guidance.
جایگزین‌های drop-in برای PIC16F716-I/P — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC16F716-I/P (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Timers, Core Architecture, Program Memory Size, Program Memory Type.
PIC16F716-I/P
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16F716-I/SO
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16F716-I/P حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 8-bit Flash-based microcontroller |
| Maximum Clock Speed | 20 MHz |
| Flash Program Memory | 3.5 KB (2K x 14) |
| RAM | 128 bytes |
| I/O Count | 13 I/O |
| A/D Converter Channels | 4 channels |
| A/D Converter Resolution | 8-bit |
| Additional Timers | 2 timers |
| PWM and Capture/Compare | Enhanced Capture/Compare/PWM |
| ولتاژ تغذیه | 2.5 V to 5.5 V |
| بسته‌بندی | 18-pin PDIP |
| نوع نصب | Through-hole |
| Instruction Execution | 200 ns |
| Instruction Set | 35 single-word instructions |
| Program Memory Type | Flash |
| Architecture | PIC16 enhanced mid-range RISC |
| Life Cycle Stage | Active |
راهنمای پیکربندی پین PIC16F716-I/P 18-pin pdip
پیکربندی پین برای PIC16F716-I/P (پکیج 18-pin pdip). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای PIC16F716-I/P.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
PIC16F716-I/P مناسب است برای 6 کاربردs: Appliance Control, Industrial Sensor Interface, Automotive Interface Module, Small Motor and Actuator Control, Consumer Product Logic, Measurement and Control Panel.
Appliance Control
The PIC16F716-I/P fits appliance control because it combines a 20 MHz 8-bit core with four 8-bit A/D channels, 13 I/O, and enhanced capture/compare/PWM functions in an 18-pin PDIP. A controller can sample temperature or level signals, operate relays, and adjust a motor or heater through PWM. The 3.5 KB Flash memory provides space for application logic, while the extra timers support timing tasks. The tradeoff is that the PDIP footprint is larger than a surface-mount package, so it is strongest for prototypes and through-hole appliance boards rather than very compact products.
پیشنهادی
Industrial Sensor Interface
For industrial sensor interfaces, the PIC16F716-I/P offers four 8-bit A/D channels and 13 I/O without requiring a separate ADC. The microcontroller can monitor pressure, level, temperature, or switch-state inputs, execute filtering and threshold logic, and report status through available digital outputs. Its 20 MHz clock provides useful control-loop headroom for modest embedded tasks. Designers should verify the exact analog input voltage range, sampling behavior, operating-temperature limits, and industrial qualification requirements before deployment, because those details are not supplied in the search excerpts.
پیشنهادی
Automotive Interface Module
The PIC16F716-I/P can serve as a compact interface MCU in automotive subsystems where several analog inputs and digital control signals must be coordinated. Microchip specifically identifies automotive applications among the device’s intended markets, and the four-channel 8-bit A/D converter can monitor sensors while PWM and timer resources control indicators or actuators. Qualification, transient immunity, temperature range, and supply requirements must be checked against the exact automotive program. The 18-pin PDIP package simplifies through-hole prototypes, while a surface-mount assembly may be preferable for space-constrained production units.
پیشنهادی
Small Motor and Actuator Control
The PIC16F716-I/P is suitable for basic motor, valve, and actuator control because enhanced capture/compare/PWM functions can generate proportional output while additional timers organize timing and event handling. Its 13 I/O lines can connect control inputs, position sensors, status LEDs, and driver-enable signals, while four A/D channels can monitor feedback or supply-related signals. The 20 MHz clock helps support responsive control logic, but motor systems also require suitable driver transistors, protection, grounding, and electrical isolation. Verify the MCU’s exact I/O and PWM pin assignments before laying out the power stage.
پیشنهادی
Consumer Product Logic
A consumer-product controller can use the PIC16F716-I/P to combine several inputs, analog sensing, timers, and PWM outputs in a single 8-bit device. The 3.5 KB Flash memory is appropriate for small embedded control tasks, and the 128-byte RAM supports local state and communication buffers. The 18-pin PDIP package is convenient for development boards and manually assembled products. For a compact production enclosure, verify whether PIC16F716-I/SO or another verified package is more appropriate; the supplied data confirms the target package but does not establish a drop-in relationship between package options.
پیشنهادی
Measurement and Control Panel
The PIC16F716-I/P can support a compact measurement or control panel by sampling up to four analog channels and driving indicators, switches, or actuators through its 13 I/O lines. The 20 MHz core and additional timers make it possible to combine acquisition, display-state logic, debouncing, and basic alarm handling in one controller. The 8-bit converter is appropriate for coarse measurements rather than high-resolution instrumentation, and the designer should budget for calibration, input conditioning, and noise filtering. The PDIP package eases bench prototyping and replacement, but it consumes more PCB area than a surface-mount MCU.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC16F716-I/P — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC16F716-I/P | PIC16F716-I/SO |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Architecture | 8-bit Flash-based microcontroller | 8-bit Flash-based microcontroller | PIC16 Flash-based microcontroller family |
تفاوت‌های کلیدی
- Four-channel 8-bit A/D integration (در مقابلPIC16F716-I/SO)
- Enhanced PWM and timing resources (در مقابلPIC16F716-I/SO)
- 18-pin PDIP prototyping and serviceability (در مقابلPIC16F716-I/SO)
یادداشت‌های طراحی
Verify the device's exact VDD range, operating current, and I/O drive limits from the Microchip datasheet before powering the board. Place the required bypass capacitor close to the VDD and VSS pins and keep the supply return path short. The verified data confirms a 2.5 V to 5.5 V supply range, but it does not provide capacitor values or current limits, so those values must come from the official electrical tables rather than estimates.
Treat the 18-pin PDIP footprint as a through-hole mechanical and electrical commitment. Confirm pin 1 orientation, socket clearance, and connector access against the package drawing before fabrication. Route sensitive analog inputs away from PWM outputs, relay-driver traces, and switching supplies. The PIC16F716-I/P is easy to prototype in DIP form, but a layout designed only around the prototype socket may need redesign if the product later moves to a surface-mount package.
Do not assume that a related PIC16 suffix is a drop-in replacement. PIC16F716-I/SO appears in the supplied comparison search, but the verified excerpts do not establish that it shares the target's 18-pin PDIP footprint or complete pin multiplexing. Likewise, PIC16C54A-04E/P is not verified as compatible. Compare the exact package, pinout, memory, A/D resources, timers, supply range, and programming interface before ordering a substitute.
Use the four A/D channels with deliberate signal conditioning and filtering. Keep sensor traces short, provide a stable reference environment, and avoid routing analog inputs beside high-current switching paths. The device has four 8-bit conversion channels, which makes it useful for moderate-resolution monitoring, but the application still needs suitable front-end protection and calibration. Consult the manufacturer analog-input guidance in the PIC16F716 datasheet for the final layout.
اطلاعات انطباق
The supplied product-page and distributor snippets do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Compliance must be confirmed from current Microchip documentation and the selected distributor record.
