PIC16F723-I/ML - 8-Bit 20 MHz Flash MCU | Microchip
MPN: PIC16F723-I/ML ✓ فعالPIC16F723-I/ML نمای کلی
A PIC16-series microcontroller combines a compact RISC-based processor, Flash memory, RAM, EEPROM, timers, communication peripherals, and digital and analog input/output functions on one integrated circuit. The PIC16F723 is positioned as a versatile 28-pin MCU for applications that require low standby power, a small footprint, and a broad selection of conventional embedded peripherals. Its architecture and peripheral mix place it between simple fixed-function controllers and larger general-purpose microcontrollers.
The PIC16F723-I/ML provides 7 KB of Flash memory, equivalent to 4K by 14 program words, and operates at up to 20 MHz. Its listed operating voltage spans 2.5 V to 5 V, allowing operation in 2.5 V, 3.3 V, and 5 V systems. The 28-QFN package with a 6 x 6 mm body supports compact PCB layouts, while the exposed pad construction requires attention to thermal and soldering practices during assembly.
The MCU is designed around Microchip's PIC16 instruction set and nanoWatt XLP technology. Its internal oscillator, according to the product listing, supports a 16 MHz operating point, while the device family supports instruction speeds up to 20 MHz. This combination provides enough processing bandwidth for supervisory functions, data acquisition, communication, and compact control loops without requiring an external crystal in designs that can use the internal oscillator.
Typical uses include industrial sensor nodes, building controls, appliance controllers, low-power instrumentation, communications modules, and compact embedded products. The combination of a 28-pin QFN package, low-voltage operation, and low-power-oriented architecture is especially useful when board area and standby consumption are important. Applications requiring more communication resources or a different peripheral arrangement should be reviewed against the complete PIC16F723 datasheet before schematic capture.
PCB implementation should preserve the exposed-pad and thermal requirements of the QFN package, place decoupling capacitors close to the supply pins, and route sensitive oscillator and programming signals away from noisy switching nodes. Use the manufacturer's pin-description table, programming specification, and package drawing when assigning tracks, programming connectors, and assembly land patterns; this page is not a substitute for those engineering documents.
This product summary combines the exact electrical identifiers, package information, lifecycle status, sourcing details, candidate drop-in references, and practical implementation guidance needed to evaluate PIC16F723-I/ML for a new embedded-control design. It also distinguishes the industrial-temperature ordering code from non-industrial variants and highlights package-specific considerations that are easy to miss when selecting an MCU by family name alone.
جایگزینهای drop-in برای PIC16F723-I/ML — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای PIC16F723-I/ML (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, ADC, Communication, I/O Pins, Temperature Grade.
PIC16F723A-I/ML
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16LF723-I/ML
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16F726-I/ML
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16F722-I/ML
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16F724-I/ML
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16F723-I/ML حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 8-bit flash microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 7 KB Flash (4K x 14 words) |
| Operating Voltage | 2.5 V to 5 V |
| Internal Oscillator | 16 MHz |
| بستهبندی | 28-QFN (6 x 6 mm) |
| نوع نصب | Surface mount |
| Temperature Grade | Industrial temperature |
| Programming Memory Type | Flash |
| Architecture | PIC16 RISC |
| Power Technology | nanoWatt XLP |
| Supply Configurations | 2.5 V, 3.3 V, and 5 V |
| Manufacturer Order Quantity | 28-QFN package |
راهنمای پیکربندی پین PIC16F723-I/ML 28-qfn (6 x 6 mm)
پیکربندی پین برای PIC16F723-I/ML (پکیج 28-qfn (6 x 6 mm)). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای PIC16F723-I/ML.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
PIC16F723-I/ML مناسب است برای 6 کاربردs: Industrial Sensor Nodes, Low-Power Building Controls, Appliance Control Modules, Battery-Powered Instrumentation, Communications and Protocol Modules, Compact Data Acquisition.
Industrial Sensor Nodes
The PIC16F723-I/ML fits compact sensor nodes that periodically read analog or digital inputs and transmit measurements over a low-speed communications link. Its 8-bit PIC16 architecture, 20 MHz maximum operating speed, and 7 KB Flash provide enough code space for acquisition, filtering, fault detection, and protocol handling. The 2.5 V to 5 V operating range permits use with 3.3 V sensors and industrial interface electronics. nanoWatt XLP technology supports designs that spend substantial time in low-power states. The 28-QFN 6 x 6 mm package reduces board area, although the exposed pad and long-term solder-joint reliability should be considered during qualification.
پیشنهادی
Low-Power Building Controls
PIC16F723-I/ML can serve as the local controller for lighting, occupancy, environmental, or access-control subsystems that combine digital inputs with simple analog monitoring. Its 7 KB Flash capacity supports structured firmware for debouncing, configuration storage, state machines, and diagnostics, while the 20 MHz CPU rate allows responsive control behavior. Operating from 2.5 V to 5 V permits adaptation to 3.3 V building electronics, and the low-power-oriented nanoWatt XLP architecture is useful in battery-backed branches. The small 28-QFN footprint helps place the controller close to connectors and distributed sensors, reducing board area without introducing a large heat spreader requirement.
پیشنهادی
Appliance Control Modules
The PIC16F723-I/ML is appropriate for appliance controllers that coordinate switches, indicators, sensors, motors, and safety-related inputs. Its conventional 8-bit PIC16 execution model and 20 MHz maximum clock support responsive state-machine control, timeout handling, and diagnostic routines. The 7 KB Flash footprint is suitable for moderate application code, while the 28-QFN package allows placement in space-constrained control boards. Running from 3.3 V or 5 V simplifies integration with modern sensor and driver electronics. Designers should use the manufacturer pin-description table to assign motor-control and mains-adjacent functions and maintain the required isolation and safety boundaries.
پیشنهادی
Battery-Powered Instrumentation
For battery-powered measurement equipment, PIC16F723-I/ML combines a 16 MHz internal oscillator, low-voltage operation from 2.5 V, and the nanoWatt XLP feature set. These characteristics reduce the need for an external clock source and allow firmware to remain idle between measurements. The 20 MHz maximum CPU speed provides additional performance when signal processing or communication bursts require it, while 7 KB Flash is sufficient for compact measurement routines. The 28-QFN package reduces the physical footprint of handheld or portable instruments. Energy performance must be evaluated across active, idle, sleep, and wake states using the manufacturer power-measurement procedures.
پیشنهادی
Communications and Protocol Modules
PIC16F723-I/ML can act as the supervisory controller in a communications module that validates commands, manages local I/O, reports status, and coordinates low-speed serial links. Its 20 MHz maximum operating frequency is adequate for interrupt-driven serial protocols, framing logic, and diagnostic routines, while 7 KB Flash can hold a compact protocol stack. The 2.5 V to 5 V supply flexibility allows the MCU to interface with 3.3 V radio or transceiver logic. Use a 28-QFN layout that separates sensitive clock and programming routes from switching nodes, and confirm oscillator, timing, and peripheral mappings in the manufacturer datasheet.
پیشنهادی
Compact Data Acquisition
PIC16F723-I/ML is suitable for compact data-acquisition front ends that digitize or supervise several sensor channels and then transfer results. Its 20 MHz maximum processing speed supports sampling control, filtering, calibration tables, and status reporting, while the 7 KB Flash capacity accommodates bounded application firmware. Operating from 2.5 V to 5 V permits direct use with many sensor and converter rails, and the 28-QFN 6 x 6 mm package minimizes footprint. Signal-chain integrity depends on proper grounding, decoupling, and analog/digital partitioning. Confirm the available ADC, comparator, and timer resources in the manufacturer datasheet before assigning analog channels.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای PIC16F723-I/ML — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | PIC16F723A-I/ML | PIC16LF723-I/ML | PIC16F726-I/ML | PIC16F722-I/ML | PIC16F724-I/ML |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-QFN (6 x 6 mm) | 28-QFN (6 x 6 mm) | 28-QFN (6 x 6 mm) | 28-QFN (6 x 6 mm) | 28-QFN (6 x 6 mm) | 28-QFN (6 x 6 mm) |
| Product Type | 8-bit flash microcontroller | 8-bit flash microcontroller | 8-bit flash microcontroller | 16-bit flash microcontroller | 8-bit flash microcontroller | 8-bit flash microcontroller |
| Temperature Grade | Industrial temperature | Industrial temperature | Industrial temperature | Industrial temperature | Industrial temperature | Industrial temperature |
| Power Technology | nanoWatt XLP | nanoWatt XLP | Enhanced nanoWatt XLP | nanoWatt XLP | nanoWatt XLP | nanoWatt XLP |
| Packing | Tube | Tube | Tube | Tube | Tube | Tube |
تفاوتهای کلیدی
- Direct A-revision path in the same package (در مقابلPIC16F723A-I/ML)
- Specific target for low-power designs (در مقابلPIC16LF723-I/ML)
- Higher-performance architecture option in the family (در مقابلPIC16F726-I/ML)
- Compact production package for space-constrained boards (در مقابلPIC16F722-I/ML)
یادداشتهای طراحی
Use the Microchip package drawing for the 28-QFN 6 x 6 mm implementation and preserve the exposed-pad connection specified by the manufacturer. Place the required input and output decoupling capacitors close to their designated supply pins, with the shortest practical return path to the ground plane. Treat the exposed pad as both a thermal path and an electrical connection where the datasheet specifies one; verify the paste, solder-mask, and assembly-land-pattern details with the package documentation.
Separate sensitive oscillator, programming, and reset routing from switching nodes and high-current return paths. Because the listed device includes a 16 MHz internal oscillator, its clock accuracy will depend on layout, supply integrity, and the selected configuration; use the manufacturer's layout guidance when designing around oscillator-sensitive timing. Keep programming-test pads accessible without creating long stubs that couple into adjacent pins, and confirm unused-pin termination requirements in the pin-description table.
Do not treat the QFN package suffix as proof that any related PIC16 device is a drop-in replacement. The PIC16F723A revision, the LF low-power family, and related F-series devices can differ in pin multiplexing, clock behavior, configuration words, programming identification, and peripheral availability. Before substituting an alternative, compare the manufacturer pin and code compatibility chart, device identification value, configuration-word settings, and application-code requirements.
Evaluate low-power performance across the complete operating cycle rather than comparing sleep current alone. The nanoWatt XLP feature set can reduce standby consumption, but active current, oscillator operation, peripheral activity, and wake-up timing determine the overall energy budget. Use the manufacturer measurement conditions and start-up timing data, and account for regulator quiescent current and leakage from external sensors when estimating battery life.
اطلاعات انطباق
The manufacturer product page identifies the PIC16F723 family as in production. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not explicitly stated in the product information.