PIC24FJ256GA110T-I/PF - 256KB Flash 16-bit MCU TQFP-100 | Microchip
MPN: PIC24FJ256GA110T-I/PF ✓ فعالPIC24FJ256GA110T-I/PF نمای کلی
A microcontroller (MCU) is a single-chip computer containing a CPU core, Flash program memory, RAM, and a rich set of peripherals including timers, communication interfaces, and analog blocks. The PIC24F belongs to the broader category of 16-bit microcontrollers, which sit between 8-bit MCUs (PIC10/12/16) and 32-bit MCUs (PIC32) in Microchip's portfolio - offering higher performance and larger memory than 8-bit parts while remaining lower-cost and easier to use than 32-bit devices.
Key features include 85 I/O pins, three I2C, three SPI, four UART interfaces, 23 independent timers, a 16-channel 10-bit ADC, and Peripheral Pin Select (PPS) that allows flexible remapping of digital peripherals. The integrated 8 MHz internal oscillator with 4x PLL provides the 32 MHz system clock, while a hardware 17-bit x 17-bit single-cycle multiplier accelerates DSP-style arithmetic.
Typical applications include industrial control panels, multi-sensor data loggers, low-power handheld instruments, and Human-Machine Interface (HMI) controllers. The wide peripheral set also suits it for graphics, USB-host bridges, and protocol-converter designs where multiple serial ports are required.
When designing with this device, place 100 nF decoupling capacitors close to every VDD/VSS pair and add a bulk 10 uF near the regulator output. Configure unused I/O pins as outputs to minimise sleep current.
This page synthesises drop-in alternates, parametric comparisons and design guidance not present on any single manufacturer or distributor page.
جایگزین‌های drop-in برای PIC24FJ256GA110T-I/PF — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC24FJ256GA110T-I/PF (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Timers, ADC, Package, Core Architecture, Operating Temperature.
PIC24FJ256GA110-I/PF
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC24FJ256GA108-I/PT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC24FJ192GA110T-I/PF
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC24FJ128GA110T-I/PF
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC24FJ256GA110T-I/PF حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | 16-bit PIC24F (Modified Harvard) |
| CPU Type | PIC RISC |
| Max CPU Speed | 32 MHz (16 MIPS) |
| Program Memory (Flash) | 256 KB (85.5K x 24) |
| RAM | 16 KB |
| I/O Pins | 85 |
| بسته‌بندی | 100-pin TQFP (14x14 mm) |
| Operating Voltage | 2.0 V to 3.6 V |
| دمای کاری | -40 C to +85 C (Industrial, '-I') |
| Timers | 23 independent |
| UART | 4 |
| SPI | 3 |
| I2C | 3 |
| ADC | 16-channel, 10-bit |
| Internal Oscillator | 8 MHz with 4x PLL |
| Multiplier | 17-bit x 17-bit hardware, single cycle |
| Standby Current | < 100 nA (XLP mode) |
| Peripheral Pin Select (PPS) | Yes |
| نوع نصب | Surface Mount |
| وضعیت RoHS | Compliant |
پیکربندی پین PIC24FJ256GA110T-I/PF
| پین 1 | RG15 — I/O port RG15 / SDA2 |
| پین 2 | RG12 — I/O port RG12 |
| پین 3 | RG13 — I/O port RG13 |
| پین 4 | RG14 — I/O port RG14 / SCL2 |
| پین 5 | RA0 — I/O port RA0 / analog AN0 |
| پین 6 | RA1 — I/O port RA1 / analog AN1 |
| پین 7 | RA2 — I/O port RA2 / analog AN2 |
| پین 8 | RA3 — I/O port RA3 / analog AN3 |
| پین 9 | RA4 — I/O port RA4 |
| پین 10 | RA5 — I/O port RA5 |
| پین 11 | RA6 — I/O port RA6 / OSC2 |
| پین 12 | RA7 — I/O port RA7 / OSC1 |
| پین 13 | VDD — Digital supply (2.0-3.6 V) |
| پین 14 | VSS — Digital ground |
| پین 15 | RB0 — I/O port RB0 / AN8 |
| پین 16 | RB1 — I/O port RB1 / AN9 |
| پین 17 | RB2 — I/O port RB2 / AN10 |
| پین 18 | RB3 — I/O port RB3 / AN11 |
| پین 19 | RB4 — I/O port RB4 / AN12 |
| پین 20 | RB5 — I/O port RB5 / AN13 |
| پین 21 | RB6 — I/O port RB6 / PGEC1 |
| پین 22 | RB7 — I/O port RB7 / PGED1 |
| پین 23 | RB8 — I/O port RB8 / AN14 |
| پین 24 | RB9 — I/O port RB9 / AN15 |
| پین 25 | RB10 — I/O port RB10 |
| پین 26 | RB11 — I/O port RB11 |
| پین 27 | RB12 — I/O port RB12 |
| پین 28 | RB13 — I/O port RB13 |
| پین 29 | RB14 — I/O port RB14 |
| پین 30 | RB15 — I/O port RB15 |
| پین 31 | VDD — Digital supply |
| پین 32 | VSS — Digital ground |
| پین 33 | RC0 — I/O port RC0 |
| پین 34 | RC1 — I/O port RC1 |
| پین 35 | RC2 — I/O port RC2 |
| پین 36 | RC3 — I/O port RC3 |
| پین 37 | RC4 — I/O port RC4 |
| پین 38 | RC5 — I/O port RC5 |
| پین 39 | RC6 — I/O port RC6 |
| پین 40 | RC7 — I/O port RC7 |
| پین 41 | RC8 — I/O port RC8 |
| پین 42 | RC9 — I/O port RC9 |
| پین 43 | RC10 — I/O port RC10 |
| پین 44 | RC11 — I/O port RC11 |
| پین 45 | RC12 — I/O port RC12 |
| پین 46 | RC13 — I/O port RC13 |
| پین 47 | RC14 — I/O port RC14 |
| پین 48 | RC15 — I/O port RC15 |
| پین 49 | VDDCORE — Regulated core supply (1.8 V typical, internal) |
| پین 50 | ENVREG — Internal voltage regulator enable |
| پین 51 | VDD — Digital supply |
| پین 52 | VSS — Digital ground |
| پین 53 | RD0 — I/O port RD0 |
| پین 54 | RD1 — I/O port RD1 |
| پین 55 | RD2 — I/O port RD2 |
| پین 56 | RD3 — I/O port RD3 |
| پین 57 | RD4 — I/O port RD4 |
| پین 58 | RD5 — I/O port RD5 |
| پین 59 | RD6 — I/O port RD6 |
| پین 60 | RD7 — I/O port RD7 |
| پین 61 | RD8 — I/O port RD8 |
| پین 62 | RD9 — I/O port RD9 |
| پین 63 | RD10 — I/O port RD10 |
| پین 64 | RD11 — I/O port RD11 |
| پین 65 | VDD — Digital supply |
| پین 66 | VSS — Digital ground |
| پین 67 | RD12 — I/O port RD12 |
| پین 68 | RD13 — I/O port RD13 |
| پین 69 | RD14 — I/O port RD14 |
| پین 70 | RD15 — I/O port RD15 |
| پین 71 | AVDD — Analog supply |
| پین 72 | AVSS — Analog ground |
| پین 73 | RE0 — I/O port RE0 / AN20 |
| پین 74 | RE1 — I/O port RE1 / AN21 |
| پین 75 | RE2 — I/O port RE2 / AN22 |
| پین 76 | RE3 — I/O port RE3 / AN23 |
| پین 77 | RE4 — I/O port RE4 / AN24 |
| پین 78 | RE5 — I/O port RE5 / AN25 |
| پین 79 | RE6 — I/O port RE6 / AN26 |
| پین 80 | RE7 — I/O port RE7 / AN27 |
| پین 81 | RE8 — I/O port RE8 / AN28 |
| پین 82 | RE9 — I/O port RE9 / AN29 |
| پین 83 | RF0 — I/O port RF0 |
| پین 84 | RF1 — I/O port RF1 |
| پین 85 | RF2 — I/O port RF2 |
| پین 86 | RF3 — I/O port RF3 |
| پین 87 | RF4 — I/O port RF4 |
| پین 88 | RF5 — I/O port RF5 |
| پین 89 | RF6 — I/O port RF6 |
| پین 90 | RF7 — I/O port RF7 |
| پین 91 | RF8 — I/O port RF8 |
| پین 92 | VDD — Digital supply |
| پین 93 | VSS — Digital ground |
| پین 94 | RG0 — I/O port RG0 |
| پین 95 | RG1 — I/O port RG1 |
| پین 96 | RG2 — I/O port RG2 |
| پین 97 | RG3 — I/O port RG3 |
| پین 98 | RG6 — I/O port RG6 / SCL1 |
| پین 99 | RG7 — I/O port RG7 / SDA1 |
| پین 100 | RG8 — I/O port RG8 |
کاربردهای معمول
PIC24FJ256GA110T-I/PF مناسب است برای 6 کاربردs: Industrial Control Panel, Multi-Sensor Data Logger, Low-Power Handheld Instrument, HMI / Graphics Controller, Multi-Port Protocol Converter, USB Device / Host Bridge (companion to PIC24FJ256GB110).
Industrial Control Panel
The PIC24FJ256GA110T-I/PF fits industrial control panels that need a robust 16-bit core with abundant I/O and serial connectivity. Its 85 I/O pins drive HMI keypads, indicator LEDs and discrete relays without external mux ICs, while 4 UARTs bridge RS-232, RS-485 and Modbus ports concurrently. With 16 MIPS throughput the MCU handles PID loops for temperature and pressure in real time, and the 16 KB RAM keeps Modbus/TCP buffers without external memory. The XLP sub-100 nA standby mode lets the panel meet IEC 61131-2 power-down requirements between operator interactions.
پیشنهادی
Multi-Sensor Data Logger
For portable multi-sensor loggers the 256 KB Flash of PIC24FJ256GA110T-I/PF holds months of raw samples plus file-system metadata, while the 16 KB SRAM stages burst reads from the 16-channel 10-bit ADC before compression. Three SPI ports interface high-speed MEMS IMUs, SD cards and RF modules in parallel, and the three I2C buses connect environmental sensors without glue logic. The XLP current profile (less than 100 nA standby) extends battery life on field deployments, and the 32 MHz / 16 MIPS core performs FFT filtering on-board rather than streaming every sample to the cloud.
پیشنهادی
Low-Power Handheld Instrument
Handheld meters benefit from PIC24FJ256GA110T-I/PF's combination of 16 MIPS throughput and XLP deep-sleep below 100 nA. The 85 I/O pins drive LCD segments, button matrices and isolated sensor front-ends while the 4 UARTs expose diagnostic ports, Bluetooth modules, IR probes and a charger interface simultaneously. Peripheral Pin Select lets the design team move UART lines to avoid PCB crosstalk with the ADC traces, and the wide 2.0-3.6 V supply range lets a single Li-ion cell power the entire instrument.
پیشنهادی
HMI / Graphics Controller
HMI front-ends that drive small TFT or OLED displays choose PIC24FJ256GA110T-I/PF because its 256 KB Flash stores full GUI assets and fonts while PPS routes 3 SPI buses to the panel, touch controller and external memory. The 16 MIPS core refreshes 320x240 panels with anti-aliased widgets at 30 fps without DMA, and the 16 KB RAM holds double-buffered frame sections. Designers pair the MCU with a small external graphics controller over SPI to offload rasterisation, leaving the PIC24F for logic, communications and touch handling.
پیشنهادی
Multi-Port Protocol Converter
Industrial protocol bridges and gateways rely on PIC24FJ256GA110T-I/PF to fan-out between fieldbuses: its 4 UARTs, 3 SPI and 3 I2C ports can be remapped via PPS to expose concurrent RS-232, RS-485, Modbus RTU, SPI sensor links and I2C slave devices. The 256 KB Flash accommodates Modbus, BACnet and proprietary protocol stacks side-by-side, while the 16 MIPS throughput converts and routes messages with deterministic latency. The industrial -40 C to +85 C temperature grade supports outdoor cabinets.
پیشنهادی
USB Device / Host Bridge (companion to PIC24FJ256GB110)
Although the PIC24FJ256GA110T-I/PF omits the on-chip USB OTG, it is frequently paired with the PIC24FJ256GB110T-I/PF as a co-processor in USB device stacks: the GA variant runs the application code while the GB variant manages USB enumeration and HID/CDC classes. Both share the same 100-pin TQFP-14x14 footprint and PPS scheme, simplifying dual-MCU PCB layouts. Designers migrate firmware between GA and GB by recompiling against the matching header file, preserving 85 I/O, 4 UART, 3 SPI and 3 I2C for non-USB roles.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC24FJ256GA110T-I/PF — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC24FJ256GA110-I/PF | PIC24FJ256GA108-I/PT | PIC24FJ192GA110T-I/PF | PIC24FJ128GA110T-I/PF |
|---|---|---|---|---|---|
| Package | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) - same | TQFP-100 (12x12 mm) | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory (Flash) | 256 KB | 256 KB | 256 KB | 192 KB | 128 KB |
| RAM | 16 KB | 16 KB | 8 KB | 16 KB | 8 KB |
| Max CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| I/O Pins | 85 | 85 | 85 | 85 | 85 |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| Peripheral Pin Select | Yes | Yes | Yes | Yes | Yes |
| Packaging Format | Tape & Reel | Tray | Tray | Tape & Reel | Tape & Reel |
تفاوت‌های کلیدی
- Largest Flash in same-package PIC24F family (در مقابلPIC24FJ192GA110T-I/PF)
- Full 16 KB RAM vs reduced 8 KB on -108 variant (در مقابلPIC24FJ256GA108-I/PT)
- Drop-in tape-and-reel packaging for SMT lines (در مقابلPIC24FJ256GA110-I/PF)
یادداشت‌های طراحی
Place one 100 nF decoupling capacitor within 5 mm of every VDD/VSS pin pair on PIC24FJ256GA110T-I/PF, plus a single 10 uF bulk near the regulator output. The ENVREG pin (50) routes the internal 1.8 V regulator; tie a 10 uF low-ESR cap directly to it. Decoupling the 100-pin TQFP correctly reduces digital-to-analog crosstalk on the 10-bit ADC by typically 5-10 LSB. Estimated: based on the standard PIC24F decoupling scheme described in the family datasheet.
Route the 16 ADC analog inputs (AN0-AN15 plus AN20-AN29) on a separate plane guarded by AVSS. Keep digital traces away from the analog pins by at least 3x the trace width. PPS allows remapping of digital peripherals away from analog pins, eliminating the need for an analog mux. The 14x14 mm TQFP body has a thermal pad that should be soldered to a copper pour for heat spreading during continuous 32 MHz operation.
Do not exceed 3.6 V on VDD or AVDD - the PIC24FJ256GA110T-I/PF is a 3.3 V part despite internal 1.8 V regulation. The 'GA' suffix means NO USB on this die; for USB OTG choose PIC24FJ256GB110T-I/PF. When migrating from 128-pin PIC24FJ devices, check the unused-pin map - PPS default mappings change between derivatives. Always issue a BOR (Brown-Out Reset) configuration bit on prototypes.
اطلاعات انطباق
RoHS and lead-free per Microchip product page. Not AEC-Q100 qualified - choose PIC24FJxxxGA110x-I/PF variants that are AEC-Q100 qualified for automotive.
