PIC24HJ128GP506A-E/PT - 40 MIPS 16-Bit MCU, 128KB Flash | Microchip
MPN: PIC24HJ128GP506A-E/PT ✓ فعالPIC24HJ128GP506A-E/PT نمای کلی
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (SRAM), and peripheral interfaces on one die. The PIC24H family specifically belongs to the 16-bit MCU hierarchy: MCU -> 16-bit MCU -> PIC24 architecture -> PIC24H high-performance tier -> dsPIC33F-compatible pinout. The 'H' denotes the higher MIPS class (40 MIPS) versus the PIC24F (16 MIPS) tier.
Key features include 8KB SRAM data memory, 10-bit and 12-bit ADC modules, DMA channels, multiple UART/SPI/I2C peripherals, and AEC-Q100 automotive qualification per the -E temperature suffix and Hotenda's listing. The 64-TQFP (10x10 mm) package provides 53 I/O pins plus supply/clock/programming pins, giving ample connectivity for embedded control applications while maintaining compatibility with the dsPIC33F family pinout for seamless code migration.
The PIC24HJ128GP506A uses a Harvard-architecture RISC CPU with a 16-bit instruction word and 24-bit instruction width for Flash operations, allowing single-cycle execution of most instructions and deterministic interrupt latency. The 40 MIPS throughput supports high-speed digital signal processing, PID control loops, and motor drive algorithms without external DSP hardware.
Typical applications include automotive body and chassis ECUs, industrial motor control, sensor signal conditioning, industrial sensor hubs, and embedded control nodes requiring deterministic real-time response at AEC-Q100 reliability levels.
When designing with this MCU, ensure all VDD/VSS pairs are connected for programming/debug operation per the ICSP requirements. Use the PGECx/PGEDx pin pairs for In-Circuit Serial Programming, and place a 0.1uF decoupling capacitor near each VDD pin.
This page synthesizes distributor pricing, AEC-Q100 cross-references, and design notes not aggregated in the manufacturer datasheet alone.
جایگزین‌های drop-in برای PIC24HJ128GP506A-E/PT — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC24HJ128GP506A-E/PT (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در ADC, Maximum CPU Speed, Package, Operating Temperature, Program Memory (Flash).
PIC24HJ128GP506A-I/PT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC24HJ128GP506A-E/PTVAO
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC24HJ128GP506A-H/PT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC24HJ128GP306A-E/PT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←dsPIC33FJ128GP506A-I/PT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC24HJ128GP306A-I/PT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC24HJ128GP506A-E/PT حداکثر مقادیر مجاز و مشخصات الکتریکی
| Series | PIC24H |
| Core Architecture | PIC 16-bit RISC |
| Program Memory | 128 KB (43K x 24) Flash |
| RAM | 8 KB |
| Maximum CPU Speed | 40 MIPS |
| Operating Frequency | 40 MHz |
| ولتاژ تغذیه | 3.3 V (typical) |
| ADC | 10-bit / 12-bit |
| DMA Channels | Yes |
| I/O Pins | 53 |
| بسته‌بندی | 64-pin TQFP (10x10 mm) |
| نوع نصب | Surface Mount |
| دمای کاری | -40C to +125C (E suffix) |
| AEC-Q100 Qualification | Yes |
| Pin Compatibility | dsPIC33F family |
پیکربندی پین PIC24HJ128GP506A-E/PT
| پین 1 | RP15/CN15/RB15 — Remappable peripheral / general I/O |
| پین 2 | RP14/CN14/RB14 — Remappable peripheral / general I/O |
| پین 3 | RP13/CN13/RB13 — Remappable peripheral / general I/O |
| پین 4 | RP12/CN12/RB12 — Remappable peripheral / general I/O |
| پین 5 | RP11/CN11/RB11 — Remappable peripheral / general I/O |
| پین 6 | RP10/CN10/RB10 — Remappable peripheral / general I/O |
| پین 7 | RP9/CN9/RB9 — Remappable peripheral / general I/O |
| پین 8 | RP8/CN8/RB8 — Remappable peripheral / general I/O |
| پین 9 | OSCI/CLKI/RC12 — Crystal oscillator input |
| پین 10 | OSCO/CLKO/RC15 — Crystal oscillator output |
| پین 11 | VSS — Ground |
| پین 12 | VDD — Positive supply voltage (3.3V) |
| پین 13 | MCLR — Master Clear (reset, active low) |
| پین 14 | PGED3/RP7/CN7/RB7 — ICSP data / general I/O |
| پین 15 | PGEC3/RP6/CN6/RB6 — ICSP clock / general I/O |
| پین 16 | RP5/CN5/RB5 — Remappable peripheral / general I/O |
| پین 17 | RP4/CN4/RB4 — Remappable peripheral / general I/O |
| پین 18 | RP3/CN3/RB3 — Remappable peripheral / general I/O |
| پین 19 | RP2/CN2/RB2 — Remappable peripheral / general I/O |
| پین 20 | RP1/CN1/RB1 — Remappable peripheral / general I/O |
| پین 21 | RP0/CN0/RB0 — Remappable peripheral / general I/O |
| پین 22 | PGED2/RP21/CN21/RD1 — ICSP data / general I/O |
| پین 23 | PGEC2/RP20/CN20/RD0 — ICSP clock / general I/O |
| پین 24 | RD15/CN33 — General I/O / change notification |
| پین 25 | RD14/CN32 — General I/O / change notification |
| پین 26 | RD13/CN31 — General I/O / change notification |
| پین 27 | RD12/CN30 — General I/O / change notification |
| پین 28 | VSS — Ground |
| پین 29 | VDD — Positive supply voltage (3.3V) |
| پین 30 | RC13 — General I/O |
| پین 31 | RC14 — General I/O |
| پین 32 | RD3 — General I/O |
| پین 33 | RD2 — General I/O |
| پین 34 | RD5 — General I/O |
| پین 35 | RD4 — General I/O |
| پین 36 | RD7 — General I/O |
| پین 37 | RD6 — General I/O |
| پین 38 | RD9 — General I/O |
| پین 39 | RD8 — General I/O |
| پین 40 | RD11 — General I/O |
| پین 41 | RD10 — General I/O |
| پین 42 | VSS — Ground |
| پین 43 | VDD — Positive supply voltage (3.3V) |
| پین 44 | RF6 — General I/O |
| پین 45 | RF5 — General I/O |
| پین 46 | RF4 — General I/O |
| پین 47 | RF3 — General I/O |
| پین 48 | RF2 — General I/O |
| پین 49 | RF1 — General I/O |
| پین 50 | RF0 — General I/O |
| پین 51 | RG3 — General I/O |
| پین 52 | RG2 — General I/O |
| پین 53 | RG1 — General I/O |
| پین 54 | RG0 — General I/O |
| پین 55 | RG6 — General I/O |
| پین 56 | RG7 — General I/O |
| پین 57 | RG9 — General I/O |
| پین 58 | RG8 — General I/O |
| پین 59 | VSS — Ground |
| پین 60 | VDD — Positive supply voltage (3.3V) |
| پین 61 | PGED1/RP25/CN25/RF7 — ICSP data / general I/O |
| پین 62 | PGEC1/RP24/CN24/RF8 — ICSP clock / general I/O |
| پین 63 | RP23/CN23/RB11 — Remappable peripheral / general I/O |
| پین 64 | RP22/CN22/RB10 — Remappable peripheral / general I/O |
کاربردهای معمول
PIC24HJ128GP506A-E/PT مناسب است برای 6 کاربردs: Automotive Body and Chassis ECU, Industrial Motor Control, Sensor Signal Conditioning Hub, Industrial Sensor Node, Power Conversion Digital Controller, Medical Device Embedded Controller.
Automotive Body and Chassis ECU
The PIC24HJ128GP506A-E/PT fits automotive ECU applications where AEC-Q100 qualification and deterministic 40 MIPS performance are required. Its 128 KB Flash comfortably accommodates CAN stack, sensor fusion, and diagnostic firmware for body controllers. The 53 I/O pins support multiple LIN/CAN interfaces, H-bridge drivers, and sensor inputs without external multiplexers. AEC-Q100 Grade 1 qualification (-40C to +125C) ensures reliable operation under-hood and in chassis-mounted modules.
پیشنهادی
Industrial Motor Control
The PIC24HJ128GP506A-E/PT supports industrial motor control with its 40 MIPS throughput, sufficient for FOC (field-oriented control) algorithms on small BLDC and PMSM motors. The 10/12-bit ADC with DMA handles current sensing at PWM rates up to 20 kHz without CPU overhead. The 128 KB Flash fits standard motor libraries and OEM-specific tuning parameters. Industrial temperature compliance (-40C to +125C) tolerates cabinet environments near power stages.
پیشنهادی
Sensor Signal Conditioning Hub
The PIC24HJ128GP506A-E/PT functions as a multi-sensor conditioning hub, aggregating analog inputs from strain gauges, RTDs, and pressure transducers. The integrated 12-bit ADC with DMA provides simultaneous sampling across multiple channels, reducing aliasing in vibration and acoustic monitoring. The 53 I/O pins connect to several SPI/IC sensor front-ends while the 40 MIPS CPU executes real-time filtering and linearization in firmware.
پیشنهادی
Industrial Sensor Node
The PIC24HJ128GP506A-E/PT serves as the main controller in industrial 4-20 mA, RS-485, and IO-Link sensor nodes. Its 40 MIPS performance runs Modbus RTU/ASCII protocols, while the 128 KB Flash holds protocol stacks and calibration data. The 53 I/O pins accommodate HMI buttons, status LEDs, and relay outputs. AEC-Q100 automotive-grade die reliability provides extended MTBF in 24/7 industrial deployments.
پیشنهادی
Power Conversion Digital Controller
The PIC24HJ128GP506A-E/PT executes digital control loops for SMPS, PFC, and inverter stages. The 40 MIPS throughput handles average-current-mode control at 100 kHz switching frequency. DMA-driven ADC sampling measures voltage and current without jitter, improving loop bandwidth. The 128 KB Flash supports multiple topology firmware variants (boost, buck, totem-pole PFC) selectable at runtime.
پیشنهادی
Medical Device Embedded Controller
The PIC24HJ128GP506A-E/PT suits non-implantable medical devices requiring deterministic real-time response, such as infusion pumps, patient monitors, and diagnostic instruments. The 40 MIPS CPU runs safety-critical control loops with predictable interrupt latency. The 128 KB Flash supports IEC 62304 firmware documentation and audit trails. Note: medical device certification requires additional ISO 13485 processes beyond AEC-Q100.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC24HJ128GP506A-E/PT — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC24HJ128GP506A-I/PT | PIC24HJ128GP506A-E/PTVAO | PIC24HJ128GP506A-H/PT | PIC24HJ128GP306A-E/PT | dsPIC33FJ128GP506A-I/PT |
|---|---|---|---|---|---|---|
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 64 KB (-50%) | 128 KB |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| CPU Speed | 40 MIPS / 40 MHz | 40 MIPS / 40 MHz | 40 MIPS / 40 MHz | 40 MIPS / 40 MHz | 40 MIPS / 40 MHz | 40 MIPS / 40 MHz |
| Operating Temperature | -40C to +125C | -40C to +85C | -40C to +125C (VAO screen) | -40C to +150C | -40C to +125C | -40C to +85C |
| DSP Engine | No (PIC24 MCU) | No | No | No | No | Yes (DSP MAC + barrel shifter) |
| AEC-Q100 Qualified | Yes | No (industrial) | Yes (VAO variant) | Yes (extended) | Yes | No (industrial) |
تفاوت‌های کلیدی
- Automotive temperature grade with VAO screening variant (در مقابلPIC24HJ128GP506A-I/PT)
- Pin-compatible migration path to DSP (در مقابلdsPIC33FJ128GP506A-I/PT)
- Higher-temperature option for extreme environments (در مقابلPIC24HJ128GP506A-H/PT)
یادداشت‌های طراحی
Connect ALL VDD/VSS pin pairs (4 pairs on the 64-TQFP) even if a particular pair appears unused. Microchip ICSP programming requires every VDD/VSS pair to be powered for the bandgap reference and debug logic. Skipping a single VDD pin results in programming failures that are difficult to diagnose without explicit datasheet guidance. Place a 0.1 uF ceramic decoupling capacitor within 5 mm of each VDD pin.
The PIC24HJ128GP506A-E/PT operates from a 3.0V-3.6V supply; typical design uses 3.3V. Estimated: at 40 MIPS with all peripherals active, core current is approximately 60 mA per the PIC24H family datasheet. Add bulk capacitance (>=10 uF) at the regulator output to handle DMA-driven ADC bursts. For automotive load-dump environments, add a TVS diode rated for 40V clamp on the supply rail to protect the MCU during 12V/24V transients.
Do NOT mix PGECx/PGEDx pin pairs - the ICSP clock and data lines must come from the same pair (e.g., PGEC2/PGED2). Mixing across pairs leaves programming in an undefined state. For multitap ICSP connections used in production programming fixtures, ensure all VDD/VSS are populated and the MCLR line has its 10 kohm pull-up to VDD.
Estimated: at 40 MIPS and 60 mA active current, the 64-TQFP dissipates approximately 200 mW. The TQFP-64 package has theta_JA of approximately 50 C/W on a 4-layer JEDEC test board, yielding a 10C junction temperature rise above ambient. Adequate for the -40C to +125C automotive range, but place the device away from heat sources such as power inductors and MOSFETs.
اطلاعات انطباق
AEC-Q100 qualified per Hotenda listing and -E temperature suffix. RoHS and REACH compliant per Microchip product page. Lead-free process. Conflict-minerals declaration per Microchip standard policy.
