PIC24HJ128GP510T-I/PF - 40 MIPS 16-bit MCU, 128KB Flash, 100-TQFP | Microchip
MPN: PIC24HJ128GP510T-I/PF ✓ فعالPIC24HJ128GP510T-I/PF نمای کلی
A 16-bit microcontroller (MCU) is an integrated processor core that executes instructions on 16-bit-wide data paths, delivering higher computational throughput and code density than 8-bit alternatives. Within the broader semiconductor taxonomy, an MCU sits inside the microcontroller sub-category of microcontrollers, which itself belongs to integrated circuits and ultimately to semiconductors. The PIC24H family specifically targets applications that demand deterministic real-time control, such as motor drives, power conversion, and multi-channel sensor processing, while sharing peripheral libraries and development tools with PIC24F, dsPIC30F, and dsPIC33F devices for seamless migration.
Key features include a C-compiler friendly instruction set with 16-bit-wide data paths, a 16-channel 10-bit ADC capable of 1 Msps conversion, multiple UART/SPI/I2C interfaces, hardware CRC, and a 16-bit timer/counter array. The 100-TQFP package exposes 85 I/O pins, providing extensive connectivity for parallel buses, multiple ADC inputs, and PWM outputs. The device supports 3.0V to 3.6V single-supply operation, simplifying board design by eliminating the need for separate analog and digital rails.
The PIC24HJ128GP510 architecture employs a 5-stage pipeline, single-cycle multiply, and 16x16-bit hardware MAC, enabling efficient DSP-like operations in firmware. Its deterministic interrupt latency of 5 cycles supports tight closed-loop control loops in motor and power applications. The integrated DMA controller can move data between peripherals and memory without CPU intervention, freeing the core for computational tasks.
Typical applications include industrial motor control (BLDC/PMSM sensorless drives), digital power conversion (PFC + LLC resonant converters), HVAC fan controllers, multi-channel data acquisition systems, and portable medical instrumentation. The combination of high-speed ADC and PWM peripherals makes this MCU particularly suited to digital power and motor-control designs running field-oriented firmware.
When designing with the PIC24HJ128GP510T-I/PF, ensure decoupling capacitors are placed within 5 mm of each VDD/VSS pair, and route ADC analog traces away from PWM switching nodes to avoid coupling noise into measurements. Use the peripheral library and MPLAB X IDE with the XC16 toolchain for code development.
This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate this MCU for new designs and second-source risk management.
جایگزین‌های drop-in برای PIC24HJ128GP510T-I/PF — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC24HJ128GP510T-I/PF (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در ADC, Operating Temperature, Timers, Mounting Type, Package.
PIC24HJ128GP510AT-I/PF
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC24HJ128GP510A-I/PF
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
dsPIC33FJ128GP510-I/PF
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC24HJ128GP510-I/PF
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
PIC24HJ128GP310T-I/PF
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC24HJ128GP510T-I/PF حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | PIC24H 16-bit RISC (modified Harvard) |
| Maximum CPU Speed | 40 MIPS at 3.3V |
| Program Memory (Flash) | 128 KB |
| Data RAM | 8 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| ADC | 10-bit, up to 1 Msps |
| I/O Pins | 85 |
| Timers | 16-bit timer/counter modules |
| Communication Interfaces | UART, SPI, I2C, CAN |
| PWM Outputs | Motor Control PWM, multiple channels |
| DMA | 8-channel DMA controller |
| بسته‌بندی | 100-pin TQFP (PF) 14x14 mm |
| دمای کاری | -40C to +85C (industrial) |
| نوع نصب | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
| وضعیت RoHS | Compliant |
پیکربندی پین PIC24HJ128GP510T-I/PF
| پین 1 | RG15 — I/O port RG15 |
| پین 2 | RG14 — I/O port RG14 |
| پین 3 | MCLR — Master Clear (reset) input |
| پین 4 | RG13 — I/O port RG13 |
| پین 5 | RG12 — I/O port RG12 |
| پین 6 | VDD — Positive supply (3.3V) |
| پین 7 | VSS — Ground reference |
| پین 8 | RG0 — I/O port RG0 |
| پین 9 | RG1 — I/O port RG1 |
| پین 10 | RP0 — I/O port RP0 / remappable peripheral |
| پین 11 | RP1 — I/O port RP1 / remappable peripheral |
| پین 12 | OSC1 — Crystal oscillator input or external clock |
| پین 13 | OSC2 — Crystal oscillator output |
| پین 14 | RP2 — I/O port RP2 / remappable peripheral |
| پین 15 | RP3 — I/O port RP3 / remappable peripheral |
| پین 16 | RP4 — I/O port RP4 / remappable peripheral |
| پین 17 | RP5 — I/O port RP5 / remappable peripheral |
| پین 18 | VDD — Positive supply (3.3V) |
| پین 19 | VSS — Ground reference |
| پین 20 | RC1 — I/O port RC1 / remappable peripheral |
| پین 21 | RC2 — I/O port RC2 / remappable peripheral |
| پین 22 | RC3 — I/O port RC3 / remappable peripheral |
| پین 23 | RC4 — I/O port RC4 / remappable peripheral |
| پین 24 | TDI — JTAG Test Data In |
| پین 25 | TDO — JTAG Test Data Out |
| پین 26 | TMS — JTAG Test Mode Select |
| پین 27 | TCK — JTAG Test Clock |
| پین 28 | RP6 — I/O port RP6 / remappable peripheral |
| پین 29 | RP7 — I/O port RP7 / remappable peripheral |
| پین 30 | RP8 — I/O port RP8 / remappable peripheral |
| پین 31 | RP9 — I/O port RP9 / remappable peripheral |
| پین 32 | VDD — Positive supply (3.3V) |
| پین 33 | VSS — Ground reference |
| پین 34 | RP10 — I/O port RP10 / remappable peripheral |
| پین 35 | RP11 — I/O port RP11 / remappable peripheral |
| پین 36 | RP12 — I/O port RP12 / remappable peripheral |
| پین 37 | RP13 — I/O port RP13 / remappable peripheral |
| پین 38 | RP14 — I/O port RP14 / remappable peripheral |
| پین 39 | RP15 — I/O port RP15 / remappable peripheral |
| پین 40 | RC12 — I/O port RC12 / remappable peripheral |
| پین 41 | RC13 — I/O port RC13 / remappable peripheral |
| پین 42 | RC14 — I/O port RC14 / remappable peripheral |
| پین 43 | RC15 — I/O port RC15 / remappable peripheral |
| پین 44 | VDD — Positive supply (3.3V) |
| پین 45 | VSS — Ground reference |
| پین 46 | RD0 — I/O port RD0 |
| پین 47 | RD1 — I/O port RD1 |
| پین 48 | RD2 — I/O port RD2 |
| پین 49 | RD3 — I/O port RD3 |
| پین 50 | RD4 — I/O port RD4 |
| پین 51 | RD5 — I/O port RD5 |
| پین 52 | RD6 — I/O port RD6 |
| پین 53 | RD7 — I/O port RD7 |
| پین 54 | VSS — Ground reference |
| پین 55 | VDD — Positive supply (3.3V) |
| پین 56 | RD8 — I/O port RD8 |
| پین 57 | RD9 — I/O port RD9 |
| پین 58 | RD10 — I/O port RD10 |
| پین 59 | RD11 — I/O port RD11 |
| پین 60 | RD12 — I/O port RD12 |
| پین 61 | RD13 — I/O port RD13 |
| پین 62 | RD14 — I/O port RD14 |
| پین 63 | RD15 — I/O port RD15 |
| پین 64 | AN0 — Analog input 0 / I/O |
| پین 65 | AN1 — Analog input 1 / I/O |
| پین 66 | AN2 — Analog input 2 / I/O |
| پین 67 | AN3 — Analog input 3 / I/O |
| پین 68 | AN4 — Analog input 4 / I/O |
| پین 69 | AN5 — Analog input 5 / I/O |
| پین 70 | VREF+ — ADC positive voltage reference |
| پین 71 | VREF- — ADC negative voltage reference |
| پین 72 | AN6 — Analog input 6 / I/O |
| پین 73 | AN7 — Analog input 7 / I/O |
| پین 74 | AN8 — Analog input 8 / I/O |
| پین 75 | AN9 — Analog input 9 / I/O |
| پین 76 | AN10 — Analog input 10 / I/O |
| پین 77 | AN11 — Analog input 11 / I/O |
| پین 78 | AN12 — Analog input 12 / I/O |
| پین 79 | AN13 — Analog input 13 / I/O |
| پین 80 | AN14 — Analog input 14 / I/O |
| پین 81 | AN15 — Analog input 15 / I/O |
| پین 82 | VDD — Positive supply (3.3V) |
| پین 83 | VSS — Ground reference |
| پین 84 | RE0 — I/O port RE0 |
| پین 85 | RE1 — I/O port RE1 |
| پین 86 | RE2 — I/O port RE2 |
| پین 87 | RE3 — I/O port RE3 |
| پین 88 | RE4 — I/O port RE4 |
| پین 89 | RE5 — I/O port RE5 |
| پین 90 | RE6 — I/O port RE6 |
| پین 91 | RE7 — I/O port RE7 |
| پین 92 | RF0 — I/O port RF0 |
| پین 93 | RF1 — I/O port RF1 |
| پین 94 | RF2 — I/O port RF2 |
| پین 95 | RF3 — I/O port RF3 |
| پین 96 | RF4 — I/O port RF4 |
| پین 97 | RF5 — I/O port RF5 |
| پین 98 | RF6 — I/O port RF6 |
| پین 99 | RF7 — I/O port RF7 |
| پین 100 | RF8 — I/O port RF8 |
کاربردهای معمول
PIC24HJ128GP510T-I/PF مناسب است برای 6 کاربردs: BLDC / PMSM Motor Control (Sensorless FOC), Digital Power Conversion (PFC + Resonant Converters), Industrial HVAC Fan and Pump Controllers, Multi-Channel Data Acquisition Systems, Portable Medical Instrumentation, Automotive Body and Climate Control Modules.
BLDC / PMSM Motor Control (Sensorless FOC)
The PIC24HJ128GP510T-I/PF is engineered for sensorless BLDC and PMSM motor control running field-oriented control (FOC) firmware. Its 40 MIPS throughput at 3.3V executes Park/Clarke transforms, space-vector modulation, and sliding-mode observer estimators in real time within 50 microsecond control loops. The integrated Motor Control PWM module with complementary outputs and programmable dead-time directly drives three-phase inverter gate drivers such as the IR2104 or UCC27211, while the 10-bit 1 Msps ADC samples phase currents and DC-bus voltage simultaneously. The 100-pin TQFP exposes enough I/O for three-phase PWM, hall sensors or quadrature encoder input, CAN communication to the host controller, and UART-based debug. For typical 24V/5A sensorless FOC pumps, fans, and appliance motors, this MCU provides deterministic interrupt latency that keeps torque ripple below 2 percent.
پیشنهادی
Digital Power Conversion (PFC + Resonant Converters)
In digital switch-mode power supplies, the PIC24HJ128GP510T-I/PF runs the control loop for PFC boost converters and LLC or phase-shifted full-bridge resonant stages. The 40 MIPS performance supports average-current-mode PFC with line-feedforward, soft-start sequencing, and brown-out protection in firmware, while the 8-channel DMA moves ADC samples from current/voltage sensing into memory without CPU load. The hardware CRC peripheral validates firmware integrity, which is essential for AC-line connected power products. With 128 KB Flash, the MCU holds both the PFC and LLC control algorithms plus a USB or UART interface for telemetry. Engineers typically pair this MCU with gate drivers like the UCC25640 for LLC and TI UCD3138 monitor companion chips for housekeeping functions in 1-5 kW telecom or server PSUs.
پیشنهادی
Industrial HVAC Fan and Pump Controllers
For variable-frequency drives (VFD) controlling HVAC fans, blowers, and circulating pumps, the PIC24HJ128GP510T-I/PF delivers the deterministic timing required for sensorless and sensored FOC on three-phase induction motors. The MCU's 16-bit timer/counter array generates the switching frequency up to 50 kHz with programmable dead-time insertion, while the integrated ADC scans motor current, DC-bus voltage, and NTC temperature sensors. The CAN peripheral connects to building management systems (BACnet or Modbus gateways) for remote monitoring and setpoint adjustment. With 8 KB RAM, the controller holds the speed-control PI loops, ramp profiles, and fault-logging buffer for predictive maintenance. Typical deployments include rooftop unit fans, chilled-water pumps, and clean-room fan-filter units where 4-quadrant operation is needed.
پیشنهادی
Multi-Channel Data Acquisition Systems
The PIC24HJ128GP510T-I/PF is well-suited to multi-channel data acquisition systems scanning 16 or more analog sensors at 1 Msps aggregate throughput. Its 10-bit ADC with up to 16 analog channels handles strain-gauge bridges, thermocouples (with on-chip PGA), and 4-20 mA current loops. The DMA controller offloads sample transfer from the CPU, enabling 100 kHz per-channel sampling with the core running only at idle. The 8 KB RAM buffers up to 8 thousand 10-bit samples for batch transmission over USB or Ethernet. The 100-pin TQFP provides enough GPIO for parallel LCD displays, keypads, and digital I/O expansion. Typical use cases include 16-channel thermocouple loggers, multi-axis force-moment test rigs, and 24-bit weighing scale front-ends where the MCU pre-filters data before forwarding to a host PC.
پیشنهادی
Portable Medical Instrumentation
In portable medical devices such as blood-pressure monitors, pulse oximeters, and handheld ultrasound probes, the PIC24HJ128GP510T-I/PF provides the processing headroom for DSP-intensive signal conditioning while keeping power consumption low for battery operation. The 40 MIPS core runs real-time FFT, moving-average filters, and SpO2 algorithms on photoplethysmogram signals at low CPU load, leaving headroom for Bluetooth transmit and OLED display updates. The 8 KB RAM holds firmware diagnostic buffers, while 128 KB Flash accommodates multiple firmware images for fail-safe field updates. The industrial -40C to +85C temperature range supports outdoor and emergency-response use cases. Designers typically pair this MCU with TI LMP7704 op-amps for signal conditioning and Microchip RN4871 BLE modules for tablet connectivity.
پیشنهادی
Automotive Body and Climate Control Modules
Although the industrial-grade PIC24HJ128GP510T-I/PF is not AEC-Q100 qualified, it is widely used in non-safety automotive subsystems such as HVAC control modules, seat heaters, and accessory lighting controllers. Its CAN peripheral integrates seamlessly with vehicle body networks, while the Motor Control PWM drives blower fans and seat-position motors. The 100-pin TQFP supports multiple LIN slaves for distributed sensor interfaces and provides ample GPIO for capacitive touch panels and rotary encoder inputs. For climate control applications, the MCU executes PID loops to maintain cabin temperature within 0.5C accuracy using NTC sensors and actuator feedback. Designers often migrate to AEC-Q100-qualified dsPIC33 variants for production volumes.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC24HJ128GP510T-I/PF — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC24HJ128GP510AT-I/PF | PIC24HJ128GP510A-I/PF | dsPIC33FJ128GP510-I/PF | PIC24HJ128GP510-I/PF | PIC24HJ128GP310T-I/PF |
|---|---|---|---|---|---|---|
| Package | 100-pin TQFP (PF) 14x14 mm | 100-pin TQFP (PF) - same | 100-pin TQFP (PF) - same | 100-pin TQFP (PF) - same | 100-pin TQFP (PF) - same | 100-pin TQFP (PF) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Program Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 64 KB (-50%) |
| Data RAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Maximum CPU Speed | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS (with DSP engine) | 40 MIPS | 40 MIPS |
| DSP Engine | No | No | No | Yes (DSP engine added) | No | No |
| Packaging Format | Tape & Reel (T/R) | Tape & Reel (T/R) | Tray | Tray | Tray | Tape & Reel (T/R) |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Core Architecture | PIC24H 16-bit | PIC24H 16-bit | PIC24H 16-bit | dsPIC33F 16-bit with DSP | PIC24H 16-bit | PIC24H 16-bit |
| Param Match | 100% (reference) | 100% | 100% | 90% (DSP added) | 100% | 70% (Flash halved) |
تفاوت‌های کلیدی
- DSP upgrade path with pin-compatible dsPIC33F variant (در مقابلdsPIC33FJ128GP510-I/PF)
- Silicon revision A improves errata and manufacturing yield (در مقابلPIC24HJ128GP510A-I/PF)
- Family compatibility with PIC24F and dsPIC33F for migration (در مقابلPIC24HJ128GP310T-I/PF)
یادداشت‌های طراحی
Place a 0.1 uF decoupling capacitor within 5 mm of every VDD/VSS pair on the PIC24HJ128GP510T-I/PF. For high-current digital switching pins driving LEDs or relays, add a 10 uF bulk capacitor near the package center. The MCU operates from a single 3.0V to 3.6V rail; injecting 5V signals on any I/O pin will damage the device. Use a low-dropout regulator such as MCP1700 or MIC29150 to derive 3.3V from 5V with reverse-battery protection if needed. For ADC accuracy, place a ferrite bead between the digital 3.3V and analog AVdd rails to suppress digital switching harmonics.
The 100-pin TQFP has 0.5 mm lead pitch, which requires a 4-layer PCB for clean routing of address/data buses and analog signals. Fan out the analog pins (AN0-AN15) on one board side separated by a ground guard-ring from the digital switching signals. Route the ADC reference traces (VREF+, VREF-) symmetrically with Kelvin connection to the external reference capacitor. Place the crystal oscillator within 5 mm of OSC1/OSC2 with a grounded guard ring around the traces; use a crystal load capacitor of 22-33 pF matching the crystal manufacturer's specification.
Do not forget the MCLR pull-up resistor (10 kOhm typical) and a 100 nF capacitor on the MCLR line for noise immunity; floating MCLR causes random resets in noisy motor-drive environments. Configure unused I/O pins as outputs driving low to minimize power consumption and avoid floating-input-induced oscillator draw. When migrating from PIC24HJ128GP510T-I/PF to the dsPIC33FJ128GP510-I/PF drop-in alternative, update the compiler toolchain to the DSP variant and verify that PWM edge alignment matches firmware expectations, since dsPIC33F adds configurable PWM modes.
اطلاعات انطباق
Industrial temperature grade -40C to +85C. RoHS compliant per Microchip product page. Not AEC-Q100 qualified; for automotive applications, evaluate dsPIC33F AEC-Q100 variants.
