PIC32MK0256GPG048-E/7MX - 32-bit 80MHz MCU, 256KB Flash, 48-VQFN | Microchip
MPN: PIC32MK0256GPG048-E/7MX ✓ فعالPIC32MK0256GPG048-E/7MX نمای کلی
A 32-bit microcontroller (MCU) is an integrated circuit that combines a microprocessor core, program memory (Flash), data memory (SRAM), and programmable peripherals on a single silicon die. Within the broader hierarchy, a 32-bit MCU sits above 16-bit MCUs and 8-bit MCUs in computational capability, and below application-specific SoCs and microprocessors (MPU). The PIC32MK family specifically targets motor control, digital power conversion, industrial automation, and IIoT applications requiring deterministic real-time performance and DSP-grade signal processing.
Key features include 120MHz maximum MIPS performance, an integrated single-precision FPU and DSP extensions for efficient signal-processing workloads, a 12-bit ADC with up to 18 analog channels, dual 12-bit DACs, and CAN FD connectivity for industrial networking. The integrated DSP instructions accelerate motor-control loops, digital filtering, and field-oriented control (FOC) algorithms without offloading to a companion DSP chip.
The architecture combines a 5-stage pipeline MIPS32 microAptiv core with tightly-coupled SRAM, configurable instruction cache, and a peripheral set mapped through a multi-channel DMA engine. ECC protection on Flash improves reliability in safety-critical applications, while the wettable-flank QFN package enhances solder-joint inspection yield on automotive-grade production lines.
Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) control, industrial servo drives, solar micro-inverters, digital power conversion, CAN-FD networked sensors, and IIoT edge nodes. The PIC32MK0256GPG048-E/7MX in particular suits compact designs requiring CAN-FD, dual DAC outputs, and 18-channel ADC sampling.
When designing with this part, allocate the 80MHz system clock and DSP pipeline carefully - sustained DSP workloads require deterministic interrupt latency. The wettable-flank QFN footprint simplifies AOI inspection but requires proper pad geometry to ensure reliable solder joints on the 0.4mm pitch.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes beyond the manufacturer datasheet, providing a single reference for engineers evaluating the PIC32MK0256GPG048-E/7MX for motor-control and IIoT designs.
جایگزین‌های drop-in برای PIC32MK0256GPG048-E/7MX — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC32MK0256GPG048-E/7MX (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در ADC, Package, Operating Temperature, Core Architecture, DSP Extensions.
PIC32MK0256GPG048-I/7MX
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC32MK0256GPG048T-E/7MX
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC32MK0512GPG048-E/7MX
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MK0256MCJ048-E/7MX
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MK0256GPK064-E/7MX
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
PIC32MK0256GPG048-E/7MX حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | MIPS32 microAptiv |
| Core Size | 32-bit Single-Core |
| Maximum CPU Frequency | 120 MHz MIPS (80 MHz peripheral clock) |
| DSP Extensions | Yes (DSP ASE) |
| Floating Point Unit | Yes (single-precision FPU) |
| Program Flash Memory | 256 KB (256K x 8) with ECC |
| SRAM | 64 KB |
| Supply Voltage (Vcc) | 2.3 V to 3.6 V |
| دمای کاری | -40 C to +125 C (TA) |
| ADC | 18 channels x 12-bit |
| DAC | 2 channels x 12-bit |
| CAN FD | Yes (integrated) |
| بسته‌بندی | 48-VFQFN Exposed Pad, 6x6 mm, wettable flank |
| نوع نصب | Surface Mount |
| Oscillator Type | Internal |
| Compliance | RoHS |
پیکربندی پین PIC32MK0256GPG048-E/7MX
| پین 1 | RB0 — General purpose I/O, PGED1 (programming data) |
| پین 2 | RB1 — General purpose I/O, PGEC1 (programming clock) |
| پین 3 | RB2 — General purpose I/O |
| پین 4 | RB3 — General purpose I/O |
| پین 5 | VSS — Ground reference |
| پین 6 | VDD — Positive supply voltage |
| پین 7 | RB4 — General purpose I/O |
| پین 8 | RB5 — General purpose I/O |
| پین 9 | RC0 — General purpose I/O |
| پین 10 | RC1 — General purpose I/O |
| پین 11 | RC2 — General purpose I/O |
| پین 12 | RC3 — General purpose I/O |
| پین 13 | VSS — Ground reference |
| پین 14 | VDD — Positive supply voltage |
| پین 15 | RC4 — General purpose I/O |
| پین 16 | RC5 — General purpose I/O |
| پین 17 | RC6 — General purpose I/O |
| پین 18 | RC7 — General purpose I/O |
| پین 19 | RD0 — General purpose I/O |
| پین 20 | RD1 — General purpose I/O |
| پین 21 | RD2 — General purpose I/O |
| پین 22 | RD3 — General purpose I/O |
| پین 23 | RD4 — General purpose I/O |
| پین 24 | RD5 — General purpose I/O |
| پین 25 | RD6 — General purpose I/O |
| پین 26 | RD7 — General purpose I/O |
| پین 27 | VSS — Ground reference |
| پین 28 | VDD — Positive supply voltage |
| پین 29 | RE0 — General purpose I/O |
| پین 30 | RE1 — General purpose I/O |
| پین 31 | RE2 — General purpose I/O |
| پین 32 | RE3 — General purpose I/O |
| پین 33 | RE4 — General purpose I/O |
| پین 34 | RE5 — General purpose I/O |
| پین 35 | RE6 — General purpose I/O |
| پین 36 | RE7 — General purpose I/O |
| پین 37 | RF0 — General purpose I/O |
| پین 38 | RF1 — General purpose I/O |
| پین 39 | VSS — Ground reference |
| پین 40 | VDD — Positive supply voltage |
| پین 41 | RF2 — General purpose I/O |
| پین 42 | RF3 — General purpose I/O |
| پین 43 | RF4 — General purpose I/O |
| پین 44 | RF5 — General purpose I/O |
| پین 45 | OSC1 — Crystal oscillator input |
| پین 46 | OSC2 — Crystal oscillator output |
| پین 47 | MCLR — Master clear (reset) input |
| پین 48 | VDD — Positive supply voltage |
کاربردهای معمول
PIC32MK0256GPG048-E/7MX مناسب است برای 7 کاربردs: Brushless DC Motor Control, Industrial Servo Drives, Digital Power Conversion, Solar Micro-Inverters, CAN-FD Industrial Sensors, IIoT Edge Nodes, EV Charging Station Controllers.
Brushless DC Motor Control
The PIC32MK0256GPG048-E/7MX's 120 MHz MIPS core with integrated DSP ASE and single-precision FPU accelerates field-oriented control (FOC) loops and space-vector modulation for BLDC and PMSM motors. The 12-bit ADC with 18 channels supports three-phase current sensing plus DC-bus voltage monitoring simultaneously, while the dual 12-bit DACs generate reference signals for gate drivers. ECC-protected 256 KB Flash ensures reliable code execution in vibration-prone motor assemblies, and the -40C to +125C operating range suits under-hood industrial deployments.
پیشنهادی
Industrial Servo Drives
For industrial servo drive applications, the PIC32MK0256GPG048-E/7MX delivers deterministic DSP-grade throughput to execute cascaded position-velocity-current control loops at multi-kHz update rates. The CAN-FD peripheral enables high-bandwidth communication with motion controllers over industrial fieldbus networks. Integrated QEI interfaces read encoder feedback directly, while 18 ADC channels sample resolver or Hall-effect sensors. The wettable-flank 48-VQFN package simplifies AOI inspection on high-volume servo-drive production lines.
پیشنهادی
Digital Power Conversion
In digital power supplies and PFC converters, the PIC32MK0256GPG048-E/7MX runs high-frequency control loops for voltage-mode and current-mode control with sub-microsecond feedback latency. The 12-bit ADC with 18 channels supports multi-rail voltage and current sensing simultaneously, while DSP extensions accelerate digital compensator calculations. Hardware ECC on Flash prevents bit-flip-induced glitches in long-lifecycle power supplies where reliability is critical. The compact 48-VQFN footprint suits space-constrained 1U power-conversion modules.
پیشنهادی
Solar Micro-Inverters
The PIC32MK0256GPG048-E/7MX supports MPPT (Maximum Power Point Tracking) algorithms for solar micro-inverter designs with its DSP-accelerated arithmetic and integrated 12-bit ADC. Real-time computation of perturb-and-observe or incremental-conductance MPPT runs alongside inverter switching control. The wide 2.3-3.6V operating range tolerates battery-backed power architectures, while ECC Flash maintains firmware integrity across the 25+ year service life typical of solar installations.
پیشنهادی
CAN-FD Industrial Sensors
For networked industrial sensors communicating over CAN-FD, the PIC32MK0256GPG048-E/7MX integrates the CAN-FD controller on-chip, reducing BOM cost and PCB area. The 80 MHz core preprocesses sensor data (filtering, linearization, calibration) before CAN-FD transmission at 2 Mbps or higher. The 64 KB SRAM accommodates sensor-fusion buffers, while 256 KB Flash stores application firmware plus calibration tables. Industrial temperature range and ECC memory suit harsh factory-floor environments.
پیشنهادی
IIoT Edge Nodes
The PIC32MK0256GPG048-E/7MX serves as an IIoT edge node controller with its combination of DSP, FPU, CAN-FD, and 12-bit ADC for local signal processing before cloud transmission. Industrial protocol stacks (Modbus, CANopen, J1939) fit comfortably in 256 KB Flash, while 64 KB SRAM holds protocol buffers. The 120 MHz MIPS throughput runs edge analytics locally, reducing cloud bandwidth requirements. The wettable-flank QFN package enables high-yield automated assembly typical of IIoT volume production.
پیشنهادی
EV Charging Station Controllers
For EV charging station controllers, the PIC32MK0256GPG048-E/7MX manages charging profiles, safety interlocks, and CAN-FD communication with vehicle BMS units. The DSP extensions compute real-time charging-current adjustments based on battery feedback, while 18 ADC channels monitor voltage, current, and temperature across multiple measurement points. ECC Flash ensures firmware integrity over multi-year deployments, and the -40C to +125C range suits outdoor enclosure installations with direct solar exposure.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC32MK0256GPG048-E/7MX — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC32MK0256GPG048-I/7MX | PIC32MK0256GPG048T-E/7MX | PIC32MK0512GPG048-E/7MX | PIC32MK0256MCJ048-E/7MX | PIC32MK0256GPK064-E/7MX |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-VFQFN (7MX) 6x6 mm | 48-VFQFN (7MX) 6x6 mm | 48-VFQFN (7MX) 6x6 mm | 48-VFQFN (7MX) 6x6 mm | 48-VFQFN (7MX) 6x6 mm | 48-VFQFN (7MX) 6x6 mm |
| Core | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv |
| Max CPU Frequency | 120 MHz MIPS / 80 MHz PB | 120 MHz MIPS / 80 MHz PB | 120 MHz MIPS / 80 MHz PB | 120 MHz MIPS / 80 MHz PB | 120 MHz MIPS / 80 MHz PB | 120 MHz MIPS / 80 MHz PB |
| Flash Memory | 256 KB ECC | 256 KB ECC | 256 KB ECC | 512 KB ECC | 256 KB ECC | 256 KB ECC |
| SRAM | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| Temperature Grade | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +125C (Extended) | -40C to +125C (Extended) | -40C to +125C (Extended) |
| FPU + DSP | Yes (FPU + DSP ASE) | Yes (FPU + DSP ASE) | Yes (FPU + DSP ASE) | Yes (FPU + DSP ASE) | Yes (FPU + DSP ASE) | Yes (FPU + DSP ASE) |
| CAN-FD | Yes | Yes | Yes | Yes | Yes | Yes |
| ADC Channels | 18 x 12-bit | 18 x 12-bit | 18 x 12-bit | 18 x 12-bit | 18 x 12-bit | 18 x 12-bit |
تفاوت‌های کلیدی
- Higher Flash density within same VQFN-48 footprint (در مقابلPIC32MK0256GPG048T-E/7MX)
- Pin-to-pin upgrade path to 512 KB Flash (در مقابلPIC32MK0512GPG048-E/7MX)
- Motor-control peripheral specialization (در مقابلPIC32MK0256MCJ048-E/7MX)
یادداشت‌های طراحی
The PIC32MK0256GPG048-E/7MX requires a stable 2.3V-3.6V supply with low-noise regulation for reliable ADC operation. Place a 10 uF bulk capacitor and 0.1 uF decoupling capacitor close to each VDD pin (there are five VDD pins on the 48-VQFN). Estimated: at 80 MHz peripheral clock and full peripheral activation, the core draws approximately 30-40 mA; add 20 mA headroom for ADC sampling and CAN-FD bursts to size your LDO at 100 mA minimum.
The 48-VQFN package has an exposed thermal pad (EP) that must be soldered to a PCB thermal land with thermal vias to a bottom-layer ground pour for proper heat dissipation. Estimated: at full-load DSP operation with all peripherals active, junction temperature rise is approximately 15-20 C above ambient on a 4-layer FR4 board with 1 sq. inch copper pour. Industrial deployments should monitor junction temperature via the on-chip die-temperature sensor and derate appropriately above 85 C ambient.
The wettable-flank QFN package on the PIC32MK0256GPG048-E/7MX enables automated optical inspection of solder joints, but requires proper PCB pad design with 0.4 mm pitch. Use NSMD (non-solder-mask-defined) pads with 0.2 mm clearance to solder mask for reliable solder fillet formation. Place the 8 MHz primary crystal or oscillator within 5 mm of OSC1/OSC2 pins, with a guard ring around the crystal traces to reduce EMI coupling into analog ADC inputs.
Do not leave the MCLR pin floating; always tie MCLR to VDD through a 10 kohm pull-up resistor for normal operation, and provide a reset button for manual reset during development. Failure to configure the JTAG/Trace pins (RB0/RB1) properly will lock out ICSP programming - leave PGED1/PGEC1 accessible for in-circuit programming. The CAN-FD peripheral requires explicit configuration of bit-timing parameters; using defaults from code examples may not match your bus topology.
اطلاعات انطباق
RoHS compliant per Microchip product page. AEC-Q100 qualification not applicable for standard GPG variant; automotive-grade variants would carry -Q1 suffix. Lead-free packaging confirmed for 48-VQFN with wettable flanks.
