PIC32MX340F256H-80V/MR - 80MHz 32-bit MCU 256KB Flash | Microchip
MPN: PIC32MX340F256H-80V/MR ✓ فعالPIC32MX340F256H-80V/MR نمای کلی
A PIC32MX MCU belongs to the 32-bit microcontroller category, which sits within the broader embedded computing hierarchy: microcontroller -> embedded processor -> system-on-chip -> semiconductor. The PIC32MX3XX/4XX family uses the MIPS32 M4K core to deliver significantly higher computational throughput than 8-bit or 16-bit predecessors while preserving the PIC peripheral ecosystem and MPLAB X IDE toolchain, enabling easy migration from older PIC24 or PIC32 architectures.
Key features include deterministic interrupt response, hardware Multiply/Divide, 16-bit parallel master port for external memory expansion, two I2C, two SPI, and five UART/PPPP interfaces. The integrated 10-bit ADC supports up to 16 channels at 500 ksps, while dedicated DMA channels enable high-throughput peripheral transfers without CPU intervention. The VQFN-64 package provides a compact footprint and enhanced thermal dissipation through its exposed pad.
Designed around the MIPS M4K pipeline with single-cycle multiply, the PIC32MX340 architecture offers 1.56 DMIPS/MHz performance. The 80 MHz maximum core frequency, combined with 5-stage pipeline execution, delivers deterministic real-time behavior suitable for USB stacks, sensor fusion, and small graphics rendering. Peripheral pin select (PPS) simplifies PCB routing by allowing flexible I/O assignment.
Typical applications include industrial control panels, USB peripherals (HID, CDC, MSD class devices), consumer audio equipment, medical instrumentation, and embedded HMI displays. Its combination of USB, ADC, and DMA makes it well-suited for data-acquisition and bridge devices. Choose the PIC32MX340F256H-80V/MR for new designs requiring USB connectivity with ample headroom in program memory.
When designing with this device, place decoupling capacitors close to every VDD/VSS pair, follow Microchip's reference USB design (90-ohm differential impedance), and use the exposed pad as the primary ground/thermal path. Always validate USB signal integrity using Microchip's HID or CDC stack example projects.
This page synthesizes distributor pricing from DigiKey and Mouser, drop-in alternative MPNs from the same PIC32MX family, and practical PCB design notes not collected in the manufacturer datasheet.
جایگزین‌های drop-in برای PIC32MX340F256H-80V/MR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC32MX340F256H-80V/MR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در ADC, Operating Temperature, USB, DMA Channels, Package.
PIC32MX340F256HT-80V/MR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC32MX340F256H-80I/MR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MX340F256H-80V/PT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MX450F256H-80V/MR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC32MX360F256L-80I/PT
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
PIC32MX370F256H-80V/MR
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
PIC32MX340F256H-80V/MR حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | MIPS32 M4K |
| Core Size | 32-bit Single-Core |
| Maximum CPU Speed | 80 MHz |
| Program Memory (Flash) | 256 KB (256K x 8) |
| RAM Size | 32 KB (32K x 8) |
| Number of I/O Pins | 53 |
| بسته‌بندی / کیس | 64-VFQFN Exposed Pad (9x9 mm) |
| Operating Voltage | 2.3 V to 3.6 V |
| ADC | 10-bit, up to 16 channels |
| USB | USB 2.0 FS Device/Host/OTG |
| DMA | Yes |
| دمای کاری | -40C to +105C |
| نوع نصب | Surface Mount |
| Packaging | Tube (per JLCPCB listing) |
| وضعیت RoHS | Compliant |
پیکربندی پین PIC32MX340F256H-80V/MR
| پین 1 | RP15/RF6 — Remappable I/O / RPC6 |
| پین 2 | VDD — Core logic supply (2.3V-3.6V) |
| پین 3 | RP14/RF5 — Remappable I/O |
| پین 4 | RP13/RF4 — Remappable I/O |
| پین 5 | RP12/RF3 — Remappable I/O |
| پین 6 | RP11/RF2 — Remappable I/O |
| پین 7 | RP10/RF1 — Remappable I/O |
| پین 8 | RP9/RF0 — Remappable I/O |
| پین 9 | VSS — Ground reference |
| پین 10 | RP8/RG9 — Remappable I/O |
| پین 11 | RP7/RG8 — Remappable I/O |
| پین 12 | RP6/RG7 — Remappable I/O |
| پین 13 | RP5/RG6 — Remappable I/O |
| پین 14 | RP4/RG5 — Remappable I/O |
| پین 15 | RP3/RG4 — Remappable I/O |
| پین 16 | RP2/RG3 — Remappable I/O |
| پین 17 | MCLR — Master Clear / Reset input (active low) |
| پین 18 | RP1/RG2 — Remappable I/O |
| پین 19 | VDD — Core logic supply (2.3V-3.6V) |
| پین 20 | OSC1/CLKI/RC1 — Crystal oscillator input / external clock |
| پین 21 | OSC2/CLKO/RC2 — Crystal oscillator output |
| پین 22 | VSS — Ground reference |
| پین 23 | AN15/C1IN-/CVREF-/CN12/RB15 — Analog input 15 / negative comparator input |
| پین 24 | AN14/C1IN+/CN11/RB14 — Analog input 14 / positive comparator input |
| پین 25 | AN13/C2IN-/CN10/RB13 — Analog input 13 / negative comparator input |
| پین 26 | AN12/C2IN+/CN9/RB12 — Analog input 12 / positive comparator input |
| پین 27 | AN11/RB11 — Analog input 11 |
| پین 28 | AN10/RB10 — Analog input 10 |
| پین 29 | AN9/RB9 — Analog input 9 |
| پین 30 | AN8/RB8 — Analog input 8 |
| پین 31 | VDD — Core logic supply (2.3V-3.6V) |
| پین 32 | VSS — Ground reference |
| پین 33 | AN7/RB7 — Analog input 7 |
| پین 34 | AN6/RB6 — Analog input 6 |
| پین 35 | AN5/RB5 — Analog input 5 |
| پین 36 | AN4/RB4 — Analog input 4 |
| پین 37 | AN3/RB3 — Analog input 3 |
| پین 38 | AN2/RB2 — Analog input 2 |
| پین 39 | AN1/RB1 — Analog input 1 |
| پین 40 | AN0/RB0 — Analog input 0 |
| پین 41 | VDD — Core logic supply (2.3V-3.6V) |
| پین 42 | VSS — Ground reference |
| پین 43 | SDA2/RG3 — I2C2 data line (shared with RG3) |
| پین 44 | SCL2/RG2 — I2C2 clock line (shared with RG2) |
| پین 45 | D-/RG1 — USB D- data line |
| پین 46 | D+/RG0 — USB D+ data line |
| پین 47 | VUSB — USB transceiver supply (3.3V typical) |
| پین 48 | RPD0/RE8 — Remappable I/O |
| پین 49 | RPD1/RE9 — Remappable I/O |
| پین 50 | RPD2/RE0 — Remappable I/O |
| پین 51 | RPD3/RE1 — Remappable I/O |
| پین 52 | RPD4/RE2 — Remappable I/O |
| پین 53 | RPD5/RE3 — Remappable I/O |
| پین 54 | RPD6/RE4 — Remappable I/O |
| پین 55 | RPD7/RE5 — Remappable I/O |
| پین 56 | VSS — Ground reference |
| پین 57 | VDD — Core logic supply (2.3V-3.6V) |
| پین 58 | RD15 — Parallel master port data bit |
| پین 59 | RD14 — Parallel master port data bit |
| پین 60 | RD13 — Parallel master port data bit |
| پین 61 | RD12 — Parallel master port data bit |
| پین 62 | RD11 — Parallel master port data bit |
| پین 63 | RD10 — Parallel master port data bit |
| پین 64 | RD9 — Parallel master port data bit |
کاربردهای معمول
PIC32MX340F256H-80V/MR مناسب است برای 6 کاربردs: Industrial Control Panels, USB Peripherals and HID Devices, Portable Medical Instrumentation, Consumer Audio Equipment, Embedded HMI / Graphical Displays, Data Acquisition Modules.
Industrial Control Panels
The PIC32MX340F256H-80V/MR suits industrial control panels thanks to its 53 GPIO, 16-channel 10-bit ADC, and -40C to +105C operation. The 256 KB Flash holds full Modbus, CANopen, or USB-CDC stacks alongside HMI logic, while the DMA engine drives TFT or character LCD updates without CPU stalls. The 80 MHz MIPS M4K core executes control loops in well under 1 ms, and the integrated USB port enables diagnostics uploads and firmware updates from a host PC.
پیشنهادی
USB Peripherals and HID Devices
The PIC32MX340F256H-80V/MR's integrated USB 2.0 full-speed device/host/OTG controller is the centerpiece of HID, CDC, and MSD peripherals. The 80 MHz MIPS M4K core executes Microchip's free USB stack comfortably, while 256 KB Flash holds class drivers plus application logic. The 32 KB SRAM accommodates USB endpoint buffers plus protocol stacks, and DMA transfers endpoint data to RAM without CPU intervention, ensuring deterministic USB interrupt latency.
پیشنهادی
Portable Medical Instrumentation
The PIC32MX340F256H-80V/MR fits portable medical devices such as glucose meters, pulse oximeters, and handheld diagnostic tools. The 10-bit ADC with 16 input channels handles sensor readout (temperature, optical, impedance), while the DMA engine streams samples to RAM for DSP-based filtering. The 2.3-3.6 V operating range allows direct Li-Ion battery power, and the 64-VQFN exposed pad supports compact PCB layouts typical of wearable medical form factors.
پیشنهادی
Consumer Audio Equipment
The PIC32MX340F256H-80V/MR's 80 MHz MIPS M4K core runs audio decoders, USB audio class drivers, and small DSP routines, making it well-suited for USB speakers, headphone amplifiers, and DJ controllers. The 256 KB Flash stores USB Audio class firmware plus user interface logic, while DMA feeds I2S or SPI to external DACs without CPU load. Its 53 GPIO handle buttons, encoders, and LED rings typical of consumer audio front panels.
پیشنهادی
Embedded HMI / Graphical Displays
The PIC32MX340F256H-80V/MR drives small TFT and OLED HMI displays through its parallel master port (PMP) and SPI interfaces. At 80 MHz, it refreshes QVGA (320x240) panels at acceptable frame rates while running control logic concurrently. DMA streams display buffer updates from Flash to PMP peripheral, freeing the CPU for touch input handling and animation rendering. The 53 GPIO accommodate touch controller, backlight PWM, and user buttons.
پیشنهادی
Data Acquisition Modules
The PIC32MX340F256H-80V/MR serves as the controller in USB-based data acquisition modules, with its 16-channel 10-bit ADC sampling at 500 ksps and DMA streaming samples to RAM. The integrated USB FS port streams captured data to a host PC, while 256 KB Flash holds firmware plus calibration tables. The 32 KB SRAM buffers multi-channel waveform captures, and the 80 MHz MIPS M4K core performs on-the-fly scaling and digital filtering before USB transmission.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC32MX340F256H-80V/MR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC32MX340F256HT-80V/MR | PIC32MX340F256H-80I/MR | PIC32MX340F256H-80V/PT | PIC32MX450F256H-80V/MR |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-VQFN (9x9 mm) | 64-VQFN (9x9 mm) - same | 64-VQFN (9x9 mm) - same | 64-TQFP (10x10 mm) - different | 64-VQFN (9x9 mm) - same |
| Maximum CPU Speed | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| RAM Size | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| USB Version | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Hi-Speed OTG (upgrade) |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +85C (narrower) | -40C to +105C | -40C to +105C |
| GPIO Count | 53 | 53 | 53 | 53 | 53 |
تفاوت‌های کلیدی
- Highest temperature grade in the same MR footprint (در مقابلPIC32MX340F256H-80I/MR)
- Compact 9x9 mm VQFN with exposed thermal pad (در مقابلPIC32MX340F256H-80V/PT (64-TQFP))
- Drop-in upgrade path to Hi-Speed USB (در مقابلPIC32MX450F256H-80V/MR)
یادداشت‌های طراحی
Place 0.1 uF and 1 uF ceramic decoupling capacitors as close as possible to every VDD/VSS pin pair. For USB operation, add a 10 uF bulk capacitor near the VUSB pin and follow Microchip's USB hardware design guide for proper rail sequencing. Avoid sharing analog and digital supply traces.
The 64-VQFN (9x9 mm) exposed pad must be soldered to a continuous ground plane with thermal vias (typically a 3x3 array of 0.3 mm vias) for both electrical grounding and heat dissipation. This reduces junction-to-ambient thermal resistance from ~40 C/W to under 25 C/W in typical PCB layouts, which is essential when USB and ADC operate continuously.
Route the 90-ohm differential USB pair (D+ / D-) with controlled impedance and matched length within 150 mil. Keep USB traces away from switching nodes and clock oscillators. Place the 27-ohm series termination resistors on D+/D- as close to the MCU pins as possible to suppress reflections.
Do not leave unused GPIO pins floating - configure them as outputs or enable the internal weak pull-ups via firmware. Failure to do so can cause excessive current draw in sleep modes and unpredictable behavior. Also, always configure the JTAG/Trace pins (TMS, TCK, TDI, TDO) to alternate function before debugging to avoid conflicts.
اطلاعات انطباق
RoHS and REACH compliance confirmed by Microchip product page; not AEC-Q100 qualified (use PIC32MX automotive variants for that).
