PIC32MZ1024EFE144-I/JWX - 32-bit MCU, 1MB Flash, 252MHz | Microchip
MPN: PIC32MZ1024EFE144-I/JWX ✓ فعالPIC32MZ1024EFE144-I/JWX نمای کلی
A 32-bit microcontroller (MCU) is a programmable computing IC that integrates a CPU core, memory, peripherals, and I/O into a single silicon die, forming the heart of an embedded system. PIC32MZ EF family devices sit at the high-performance end of the Microchip PIC32 line, bridging the gap between traditional 8/16-bit MCUs and application processors. They employ the MIPS32 M-Class core with hardware floating-point (FPU), live-update dual-partition Flash for over-the-air firmware upgrades, and rich connectivity (Ethernet, USB, CAN, SQI). The hierarchy is: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC.
Key features include 1 MB of Flash with live-update capability, 256 KB of SRAM, hardware FPU (IEEE 754 single/double precision), integrated 10/100 Ethernet MAC with MII/RMII, USB 2.0 High-Speed OTG controller, parallel master port for graphics, up to 53 I/O pins, 32-channel 12-bit ADC, four I2C, six UART, three SPI ports, two CAN modules, real-time clock, and a 4-channel SQI (Serial Quad Interface) for off-chip Flash/PSRAM expansion. The TFBGA-144 package is the platform option.
The MCU uses a 5-stage pipeline MIPS32 M-Class core capable of 252 MHz / 415 DMIPS operation, achieving 1.65 DMIPS/MHz with the hardware multiply/divide unit. The 12-bit ADC delivers up to 1 MSPS with multiple internal references, and the integrated Ethernet and USB PHYs reduce BOM cost. Hardware cryptographic acceleration (AES, SHA, MD5) is supported on the EF family variants that include Crypto engines, suitable for secure connectivity applications.
Typical applications include industrial IoT gateways with Ethernet and CAN, automotive infotainment and cluster displays, motor control with FOC algorithms, smart energy metering with secure communications, and graphics/HMI touch panels. The Live-Update Flash enables robust OTA firmware upgrades with zero downtime, critical for connected products.
When designing, ensure the 144-pin TFBGA package requires PCB design expertise (0.5 mm pitch, microvia stack-ups recommended). Use the Microchip Harmony framework for peripheral drivers and RTOS support, and provide adequate decoupling (10 uF bulk plus 100 nF per supply pin) for the mixed 3.3 V/1.2 V supply rails.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives (same TFBGA-144 footprint), application examples with companion MPNs, and practical design notes not collected in a single place in the manufacturer datasheet.
جایگزین‌های drop-in برای PIC32MZ1024EFE144-I/JWX — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC32MZ1024EFE144-I/JWX (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, ADC, Ethernet, Mounting Type, CAN.
PIC32MZ1024EFE144-E/JWX
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ2048EFH144-I/JWX
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC32MZ1024EFE144-E/PH
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ1024ECG100-I/PT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ1024EFE144-I/JWX حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | MIPS32 M-Class |
| Core Frequency | up to 252 MHz |
| Performance | 415 DMIPS (1.65 DMIPS/MHz) |
| FPU | IEEE 754 single/double precision |
| Program Memory (Flash) | 1 MB (1024 KB) with Live-Update |
| SRAM | 256 KB |
| Operating Voltage | 2.7 V to 3.6 V |
| دمای کاری | -40C to +85C (industrial grade, suffix 'I') |
| بسته‌بندی | 144-pin TFBGA (JWX) 7x7 mm |
| I/O Pins | up to 53 |
| ADC | 12-bit, up to 32 channels, 1 MSPS |
| Ethernet | 10/100 MAC with MII/RMII |
| USB | USB 2.0 High-Speed OTG |
| CAN | 2x CAN 2.0B modules |
| UART/SPI/I2C | 6 UART / 3 SPI / 4 I2C |
| Crypto Engine | AES, SHA-256, MD5, ECC hardware accelerators |
| نوع نصب | Surface Mount |
| وضعیت RoHS | Compliant |
راهنمای پیکربندی پین PIC32MZ1024EFE144-I/JWX 144-pin tfbga (jwx) 7x7 mm
پیکربندی پین برای PIC32MZ1024EFE144-I/JWX (پکیج 144-pin tfbga (jwx) 7x7 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای PIC32MZ1024EFE144-I/JWX.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
PIC32MZ1024EFE144-I/JWX مناسب است برای 6 کاربردs: Industrial IoT Gateway with Ethernet and CAN, Automotive Infotainment HMI Cluster, Motor Control with FOC Algorithm, Smart Energy Meter with Secure Communications, Graphics HMI Touch Panel, Medical Patient Monitoring Device.
Industrial IoT Gateway with Ethernet and CAN
The PIC32MZ1024EFE144-I/JWX is well suited for industrial IoT gateways requiring deterministic Ethernet and CAN networking. Its integrated 10/100 Ethernet MAC with MII/RMII offloads TCP/IP processing from the CPU, and dual CAN 2.0B controllers support industrial protocols like CANopen and DeviceNet. The 252 MHz core runs full TLS stacks with hardware AES/SHA acceleration from the crypto engine, while 1 MB Flash stores web server firmware with Live-Update OTA capability for remote firmware management.
پیشنهادی
Automotive Infotainment HMI Cluster
The PIC32MZ1024EFE144-I/JWX powers HMI instrument clusters and infotainment displays in two-wheeler and entry-level automotive segments. Its parallel master port (PMP) drives TFT LCDs directly, and the 32-channel 12-bit ADC samples analog gauge inputs. The hardware FPU accelerates 3D graphics rendering for QVGA/WVGA displays, while USB High-Speed OTG connects to media hubs. Industrial temperature variant -40C to +85C suits in-cabin environments with proper thermal design.
پیشنهادی
Motor Control with FOC Algorithm
Field-oriented control (FOC) of three-phase PMSM/BLDC motors runs efficiently on the PIC32MZ1024EFE144-I/JWX thanks to its 252 MHz MIPS core with single-cycle FPU and DSP ASE extensions. The PWM outputs capture lane positioning, and three pairs of high-speed PWM channels drive inverter switches. Six UART interfaces support encoder feedback, while 12-bit ADC samples phase currents at rates up to 1 MSPS for tight current loop bandwidth in robotics and e-mobility.
پیشنهادی
Smart Energy Meter with Secure Communications
The PIC32MZ1024EFE144-I/JWX hosts smart electricity, water, and gas meters requiring tamper-resistant metering with secure network connectivity. Its hardware AES-256, SHA-256, and ECC accelerators enable DLMS/COSEM or ANSI C12.19 security layers, while the RTC with backup domain keeps accurate timestamps. The 12-bit ADC measures 0.2S class metrology accuracy with proper signal conditioning, and Ethernet/USB OTG ports support AMI backhaul for AMR/AMI deployments.
پیشنهادی
Graphics HMI Touch Panel
The PIC32MZ1024EFE144-I/JWX drives standalone HMI panels with integrated graphics rendering and capacitive touch sensing. The Parallel Master Port connects directly to 3.5 to 5 inch TFT displays with 16-bit color depth, while SPI/I2C interfaces link to touch controllers and external EEPROM. Microchip's MPLAB Harmony Graphics suite (Aria graphics library) accelerates UI development. The 252 MHz core with FPU supports smooth animations and 60 fps refresh on QVGA panels.
پیشنهادی
Medical Patient Monitoring Device
The PIC32MZ1024EFE144-I/JWX is used in portable patient monitoring devices such as pulse oximeters, multi-parameter monitors, and telehealth peripherals. Its USB High-Speed OTG streams patient waveforms to host PCs, and the SQI interface expands to fast external Flash storing trend history. Hardware FPU accelerates SpO2 and ECG filtering digital signal chains, while IEC 60730 Class B safety library from Microchip supports FDA/medical compliance paths.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC32MZ1024EFE144-I/JWX — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC32MZ1024EFE144-E/JWX | PIC32MZ2048EFH144-I/JWX | PIC32MZ1024ECG100-I/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-pin TFBGA (JWX) 7x7 mm | 144-pin TFBGA (JWX) 7x7 mm - same | 144-pin TFBGA (JWX) 7x7 mm - same | 100-pin TQFP - different |
| Core Frequency | 252 MHz | 252 MHz | 252 MHz | 200 MHz |
| Flash | 1 MB | 1 MB | 2 MB | 1 MB |
| SRAM | 256 KB | 256 KB | 512 KB | 256 KB |
| Operating Voltage | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Ethernet MAC | 10/100 Yes | 10/100 Yes | 10/100 Yes | 10/100 Yes |
| USB OTG | HS USB 2.0 OTG | HS USB 2.0 OTG | HS USB 2.0 OTG | HS USB 2.0 OTG |
| Operating Temperature | -40C to +85C | -40C to +125C | -40C to +85C | -40C to +85C |
تفاوت‌های کلیدی
- Pin-compatible Flash doubling for migration paths (در مقابلPIC32MZ2048EFH144-I/JWX)
- Industrial temperature availability on same die (در مقابلPIC32MZ1024EFE144-E/JWX)
- Integrated hardware crypto engine (در مقابلPIC32MX795F512L-80I/BG (legacy PIC32MX))
یادداشت‌های طراحی
The 144-pin TFBGA (JWX) package has a 0.5 mm ball pitch in a 7x7 mm body. Microvia stack-up (laser-drilled microvias in top layer) is strongly recommended. Provide at least four via-in-pad stitching grounds around the BGA perimeter, and route signal traces on inner layers to escape the BGA. Avoid dogleg formation through vias under the package that can cause signal contamination during high-current switching.
Place 10 uF bulk ceramic plus 100 nF decoupling on each VDD pin (multiple VDD/VSS pairs exist). The internal 1.2 V LDO must have 10 uF output capacitance. For low-noise analog (ADC), use a ferrite bead to isolate AVDD from DVDD. Estimated: at 252 MHz with 1.2 V core voltage, the MCU draws approximately 100-150 mA active current; bulk capacitance must support inrush.
Do not connect unused pins directly to ground unless specified by Microchip; several pins must be left floating for JTAG boundary-scan. Program configuration words using MPLAB X IDE before any code execution - factory default may not match your design. Do not omit the external 12 MHz crystal if internal 8% RC accuracy is insufficient for USB or Ethernet.
Estimated: at full 252 MHz CPU utilization, the TFBGA-144 dissipates approximately 0.5-1.0 W. The 7x7 mm package has a thermal resistance of approximately 30-35 C/W theta_JA on a standard 4-layer PCB. At 85C ambient, this yields a junction temperature of 100-120C, acceptable for industrial grade. Reduce clock frequency or improve PCB copper area for thermal margin in hot enclosures.
اطلاعات انطباق
RoHS and REACH compliant per Microchip product environmental compliance program. Not AEC-Q100 qualified - select PIC32MZ1024EFE144-E/JWX (extended temp) for harsh environments but verify AEC-Q100 status separately for automotive.
