Skyworks Solutions

SI3008-B-FSR - 2.4kbps ISOmodem | Skyworks | 8-SOIC-EP (Tape & Reel)

MPN: SI3008-B-FSR ✗ پایان تولید
8-SOIC exposed pad Package
حداقل سفارش: 1 |

SI3008-B-FSR نمای کلی

The Skyworks Solutions, Inc. SI3008-B-FSR is a highly integrated ISOmodem interface IC for telephone-line data communication, supporting a maximum data rate of 2.4 kbps in an 8-pin SOIC exposed-pad package. The supported modem formats include V.22bis at 2400 bps, V.22 and V.23 at 1200 bps, and V.21 and Bell 103 at 300 bps, with additional compatibility identified for V.32, V.34, V.90, and Bell 212A.

An ISOmodem is a modem interface integrated with telephone-line isolation and data-access arrangements. It belongs to the modem interface IC and telecom interface IC hierarchy before connecting to broader communications equipment. This category combines modulation, line-interface, isolation, signaling, and telephone-network functions in a single IC, reducing the number of discrete components required in a line-side communication design.

The SI3008-B-FSR includes a low-cost data access arrangement, parallel phone detection, fast connect, V.23 reversing, and additional security protocols. Its capacitive isolation is rated above 6000 V. These features make the device relevant to legacy data communications, alarm and monitoring systems, point-of-sale equipment, industrial terminals, and telephone-line interfaces that require network-side modem behavior rather than a modern broadband transceiver.

The device operates as a 2.4 kbps modem with support for several ITU V-series and Bell protocols. At the 2.4 kbps operating point, the SI3008-B-FSR uses V.22bis, while 1200 bps operation uses V.22 or V.23 and 300 bps operation uses V.21 or Bell 103. Compatibility with V.32, V.34, V.90, and Bell 212A extends the protocol range stated for the component. Exact operating limits, clock requirements, interface timing, and electrical characteristics should be taken from the manufacturer datasheet.

Typical uses include legacy telephone-line data links, security and alarm-control equipment, remote terminals, and embedded modems requiring fast connection or parallel phone detection. The integrated isolation architecture helps separate line-side circuitry from the host system. The exposed pad provides a thermal and ground-connection surface, although its electrical net and landing-pattern requirements must follow the manufacturer pinout and layout guidance.

Designers should treat the SI3008-B-FSR as a protocol-specific legacy modem rather than a general-purpose serial interface. The host processor must support the selected V-series or Bell signaling sequence, and the telephone-line network must be compatible with the selected country or regional approval. Input and output protection requirements depend on the line interface and regulatory environment, so the datasheet’s approved application circuits should guide component selection.

This product page combines the documented protocol capabilities, package information, regulatory statements, and cross-reference findings into an engineering-focused selection guide. It also distinguishes verified device attributes from specifications that still require confirmation from the manufacturer datasheet, helping designers evaluate the SI3008-B-FSR without treating unspecified electrical values as guaranteed.

جایگزین‌های drop-in برای SI3008-B-FSR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

SI3008-B-FSR مشخصات

Product Type ISOmodem interface IC
Maximum Data Rate 2400 bps
2400 bps Modulation V.22bis
1200 bps Modulations V.22, V.23
300 bps Modulations V.21, Bell 103
Additional Supported Formats V.32, V.34, V.90, Bell 212A
Capacitive Isolation Over 6000 V
Phone Detection Parallel phone detection
Connection Feature Fast connect
Reversing Feature V.23 reversing
Security Support SIA and other security protocols
بسته‌بندی 8-SOIC exposed pad
Surface-Mount Package Width 3.90 mm
Surface-Mount Package Length 0.154 inch
Terminal Count 8 terminals
Terminal Form Gull wing
Temperature Grade Commercial
وضعیت RoHS Lead-free
FCC Compliance Compliant
China Compliance Compliant
JATE Compliance Compliant

راهنمای پیکربندی پین SI3008-B-FSR 0.154 inch

پیکربندی پین برای SI3008-B-FSR (پکیج 0.154 inch). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 0.154 inch برای SI3008-B-FSR

داده پین‌آوت تفصیلی موجود نیست برای SI3008-B-FSR.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

SI3008-B-FSR مناسب است برای 6 کاربردs: Legacy Telephone Data Terminals, Alarm and Security Control Panels, Industrial Remote Monitoring, Point-of-Sale Terminals, Voice-Data Fax and Messaging Equipment, Embedded Legacy Communication Modules.

🌐

Legacy Telephone Data Terminals

The SI3008-B-FSR fits legacy telephone data terminals that exchange information through V.22bis, V.22, V.23, V.21, or Bell protocols at rates up to 2400 bps. The integrated low-cost data access arrangement, fast connect, and parallel phone detection reduce the amount of line-interface circuitry required around the modem IC. Its over-6000-V capacitive isolation helps separate line-side and host-side functions, while the 8-SOIC exposed-pad package supports compact surface-mount construction. The host firmware must implement the selected modem sequence and comply with the applicable regional telephone-network requirements.

🏭

Alarm and Security Control Panels

The SI3008-B-FSR is appropriate for security panels that report data through legacy telephone-line modem formats. Its support for SIA and other security protocols, fast connect, and parallel phone detection addresses common panel functions involving call establishment and line-status handling. The integrated capacitive isolation provides a useful barrier between the line-facing modem section and control electronics, rated above 6000 V in the device description. A security product must still validate the complete telephone interface, line protection, call-progress behavior, and required regional approvals rather than relying on the modem IC alone.

🏭

Industrial Remote Monitoring

The SI3008-B-FSR can serve as the communication engine in industrial monitoring equipment connected to a legacy telephone line. Support for V.22bis at 2400 bps and lower-rate Bell and V-series modes provides options for matching an established remote terminal protocol. Fast connect is useful where rapid session establishment matters, while parallel phone detection can assist line-state management. The design must confirm that 2400 bps is sufficient for the payload and must implement the required isolation, protection, and network-interface layout around the device.

🖥️

Point-of-Sale Terminals

The SI3008-B-FSR is suitable for point-of-sale equipment that uses a legacy switched-network connection for transaction reporting. V.22bis at 2400 bps can support low-volume modem sessions, while V.22, V.23, V.21, and Bell 103 modes allow compatibility with older endpoints. Parallel phone detection and fast connect can simplify operation around shared or intermittently used analog lines. The final circuit still needs the telephone-network components, protection strategy, regional compliance, and host protocol implementation required by the deployed point-of-sale network.

📡

Voice-Data Fax and Messaging Equipment

The SI3008-B-FSR can be incorporated into legacy voice-band equipment that must exchange low-speed data over an analog telephone connection. Its support for several V-series and Bell formats allows selection of a mode compatible with the remote endpoint. The 8-SOIC exposed-pad package and integrated capacitive isolation make it practical for compact multi-function equipment where board area is constrained. Designers should verify the complete data-access arrangement, line-coupling network, timing behavior, and coexistence requirements for any simultaneous voice service before approving the implementation.

🧩

Embedded Legacy Communication Modules

The SI3008-B-FSR is useful in embedded communication modules that expose a legacy modem function to a host processor. The device consolidates modulation, isolation, fast connect, parallel phone detection, and data-access functions into one IC, reducing the external component count. V.22bis provides a 2400 bps operating mode, with additional formats available for compatibility with older infrastructure. Because the exact supply voltage, interface timing, and electrical limits are not established by the indexed product records, an implementation should begin with the manufacturer datasheet and approved reference design rather than extrapolate values.

What is the SI3008-B-FSR?
The SI3008-B-FSR is a single-chip ISOmodem designed for telephone-line data communication at rates up to 2.4 kbps. According to the manufacturer datasheet description, it supports V.22bis, V.22, V.23, V.21, V.32, V.34, V.90, Bell 103, and Bell 212A formats while combining a low-cost data access arrangement with over 6000 V capacitive isolation. It is packaged in an 8-pin SOIC exposed-pad configuration.
What is the maximum baud rate of SI3008-B-FSR?
The SI3008-B-FSR supports a maximum data rate of 2400 bps using V.22bis modulation. Lower operating rates include 1200 bps with V.22 or V.23 and 300 bps with V.21 or Bell 103. The manufacturer datasheet description also identifies support for V.32, V.34, V.90, and Bell 212A, making protocol selection an important part of designing the host interface and telephone-line signaling sequence.
Where can I download the SI3008-B-FSR datasheet PDF?
The SI3008-B-FSR datasheet PDF can be reached through the linked technical document page, which identifies the document as “V.22bis ISOmodem with Low-cost DAA.” The indexed document is associated with Silicon Laboratories, while current distributor records identify the component under Skyworks Solutions, Inc. For design release, confirm the document revision and device ordering information against the current manufacturer datasheet and package drawing.
Where can I find the SI3008-B-FSR pinout?
The SI3008-B-FSR uses an 8-pin SOIC exposed-pad package, and its authoritative pin assignment must be taken from the manufacturer datasheet pin-description table. The exposed pad is a thermal and layout feature and must be connected according to the documented recommendation. Use the package drawing and land-pattern guidance together with the pin table so that exposed-pad soldering and keepout requirements are satisfied.
What protocols does the SI3008-B-FSR support?
The SI3008-B-FSR supports V.22bis at 2400 bps, V.22 and V.23 at 1200 bps, and V.21 and Bell 103 at 300 bps. The manufacturer documentation also identifies V.32, V.34, V.90, and Bell 212A compatibility. Protocol availability does not mean every mode uses identical timing or electrical characteristics, so the interface timing and operating requirements for the selected mode should be checked in the manufacturer datasheet.
What is the isolation voltage of SI3008-B-FSR?
The SI3008-B-FSR provides capacitive isolation specified above 6000 V. This barrier supports separation between the telephone-line-facing circuitry and the host-side electronics, which is central to its ISOmodem architecture. Isolation rating alone does not determine overall compliance; circuit layout, creepage, clearance, insulation, surge testing, and the regional telephone-network requirements must also be evaluated as a complete design.
Is the SI3008-B-FSR suitable for telephone-line equipment?
The SI3008-B-FSR is specifically suited to legacy telephone-line data equipment because it integrates modem signaling, a low-cost data access arrangement, capacitive isolation, fast connect, and parallel phone detection. The manufacturer identifies FCC, China, and JATE compliance, making it relevant to international line-interface designs. Final regional approval remains a system-level requirement because the complete telephone network interface and protection network also participate in certification.
What is the best drop-in replacement for SI3008-B-FSR?
No independently verified drop-in replacement for the SI3008-B-FSR was established from the available cross-reference results. SI3008-B-FSRR appears in a manufacturer-related listing with the same 8-pin lead-free ISOmodem description, but it represents a distinct ordering code and requires confirmation of pin, protocol, and ordering compatibility before substitution. Board designers should compare the manufacturer datasheets rather than treating a package-only cross-reference as proof of interchangeability.
Can SI3008-B-FSRR replace SI3008-B-FSR?
SI3008-B-FSRR may be the closest identified ordering option, but it should not be treated as an automatic replacement without a formal manufacturer cross-reference. The available listing describes it as a lead-free, 8-pin ISOmodem, yet the SI3008-B-FSR uses an 8-SOIC exposed-pad package and exact exposed-pad, protocol, and ordering details remain critical. Confirm both part numbers against their manufacturer datasheets before approving a substitution.
SI3008-B-FSR vs SI3008-B-FSRR - which is better for a new design?
SI3008-B-FSR is the specified source device, while SI3008-B-FSRR is the closest related ordering code identified in manufacturer-related records. The choice should be based on verified protocol support, package construction, exposed-pad behavior, lead-free status, and lifecycle rather than the suffix alone. For a new design, select the ordering code whose manufacturer datasheet and application circuit exactly match the intended telephone-network interface and production requirements.
When should I choose the SI3008-B-FSR over a generic modem interface?
Choose the SI3008-B-FSR when the design requires a protocol-specific legacy telephone modem with support for up to 2400 bps, integrated capacitive isolation above 6000 V, fast connect, and parallel phone detection. A generic UART or line-driver IC cannot reproduce these modem and isolation functions without substantially more external circuitry. The part is most appropriate when the connected endpoint and regional network explicitly use one of its supported V-series or Bell formats.
Is the SI3008-B-FSR suitable for a security or alarm system?
The SI3008-B-FSR is suitable for security-system designs that use a supported legacy modem format and require fast connect, parallel phone detection, and isolated line-side communication. Its SIA and other security protocols broaden its relevance for alarm equipment. The host firmware must implement the required signaling sequence correctly, and the complete line interface must meet the applicable FCC, China, JATE, surge, and network-interface requirements.
What are the key specifications of SI3008-B-FSR that engineers should know?
The principal SI3008-B-FSR specifications are a 2400 bps maximum rate, V.22bis operation at 2400 bps, over 6000 V capacitive isolation, and an 8-pin SOIC exposed-pad package. Supported formats also include V.22, V.23, V.21, V.32, V.34, V.90, Bell 103, and Bell 212A. Additional functions include parallel phone detection, fast connect, V.23 reversing, and a low-cost data access arrangement.
What can replace the SI3008-B-FSR in a legacy modem design?
The only close replacement candidate identified is SI3008-B-FSRR, which appears in a manufacturer-related listing as an 8-pin lead-free ISOmodem, but an unconditional replacement cannot be confirmed. A valid substitution must preserve the line-side isolation, modem protocol set, host interface timing, exposed-pad footprint, supply requirements, and regional approvals. Obtain a formal manufacturer cross-reference before changing the production part number.
Where to buy SI3008-B-FSR online?
Use the “Request a Quote” form on this page to request SI3008-B-FSR availability, current pricing, minimum order quantity, and lead time from XAIPART. Because this legacy modem’s lifecycle and inventory status can vary by region and package, confirm the exact ordering code before authorizing a purchase. The quote process lets the buyer request the required quantity and production packaging without relying on a stale market listing.
What is the price and lead time of SI3008-B-FSR?
Use the “Request a Quote” form on this page for the current SI3008-B-FSR price, minimum order quantity, stock position, and lead time. The available product records do not provide a qualifying quantity-break schedule for this exact MPN, so no static unit price is asserted here. For a production design, request an update that includes the exact 8-SOIC exposed-pad ordering code, delivery quantity, and required shipment date.
Does the SI3008-B-FSR need an external line interface?
The SI3008-B-FSR integrates modem functions, capacitive isolation, a low-cost data access arrangement, and phone-detection features, but it should not automatically be assumed to provide every protection, transformer, or network-interface element required by the finished product. Use the manufacturer’s typical application circuit to determine the complete telephone-line network. In particular, verify line protection, surge handling, connector routing, and regional network requirements before layout release.

داده‌های مرجع مهندسی برای SI3008-B-FSR — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the SI3008-B-FSR when a design requires a dedicated legacy telephone-line modem interface operating at up to 2400 bps, with support for V.22bis, V.22, V.23, V.21, V.32, V.34, V.90, Bell 103, and Bell 212A formats. Its capacitive isolation above 6000 V, fast connect, parallel phone detection, V.23 reversing, and integrated low-cost data-access arrangement make it more specialized than a UART, general line transceiver, or basic modem interface.

Do not select it for broadband, LTE, Ethernet, or high-speed DSL connectivity, and do not assume that the 2400 bps modem rate provides modern file-transfer performance. It is most appropriate when an established endpoint, alarm panel, terminal, or network requires one of the supported legacy formats.

SI3008-B-FSRR is the closest related ordering code identified, but it should be used only after the manufacturer confirms package, exposed-pad, protocol, and production-status equivalence. No other drop-in alternative was verified, so engineers should either use the specified MPN or obtain a formal manufacturer cross-reference before changing the PCB component. The final design should also validate regional telephone-network approval, protection, isolation layout, and host timing.

یادداشت‌های طراحی

Place the SI3008-B-FSR in accordance with the manufacturer’s exposed-pad land pattern and pin-definition drawing. The exposed pad must have the documented copper and solder treatment, and it may also serve as the device ground connection. Do not infer the pad net from a generic SOIC footprint because an incorrect connection can compromise grounding, thermal performance, isolation layout, or manufacturability.

Keep the telephone-line-facing section and the host-side circuitry physically organized around the device’s isolation boundary. Follow the manufacturer’s clearance and isolation-layout guidance, preserve the intended pad and keepout geometry, and route sensitive modem signals away from high-energy line-transients. The complete protection and line-network arrangement must be designed together with the SI3008-B-FSR to preserve isolation and regulatory performance.

Do not treat the suffix changes in SI3008-B-FSR and SI3008-B-FSRR as proof of electrical equivalence. Confirm the ordering code, package construction, pin definitions, exposed-pad net, protocol set, lifecycle status, and approved application circuit. Cross-reference tools can help locate candidates, but a production substitution requires a manufacturer-backed comparison against both datasheets.

The modem’s line-side circuitry can be affected by telephone-network transients and coupling between the line and host interface. Use the manufacturer-approved protection and filtering approach, maintain the intended isolation geometry, and test conducted and radiated emissions in the finished product. Do not add long unprotected traces or substitute generic surge components without checking their pulse-energy and capacitance effects on modem operation.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Yes
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The product records identify the component as lead-free and state FCC, China, and JATE compliance. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from the current manufacturer documentation.

جستجوهای مرتبط

SI3008-B-FSR datasheet SI3008-B-FSR datasheet pdf SI3008-B-FSR pinout SI3008-B-FSR equivalent SI3008-B-FSR replacement SI3008-B-FSR drop-in substitute SI3008-B-FSR vs SI3008-B-FSRR SI3008-B-FSR 8-SOIC-EP footprint SI3008-B-FSR 2400 bps modem SI3008-B-FSR V.22bis ISOmodem Skyworks SI3008-B-FSR SI3008-B-FSR price SI3008-B-FSR stock

قطعات و اصطلاحات مرتبط

Skyworks Solutions, Inc. Silicon Laboratories SI3008-B-FSR SI3008-B-FSRR ISOmodem modem interface IC telecom interface IC integrated circuit semiconductor V.22bis V.22 V.23 V.21 V.32 V.34 V.90 Bell 103 Bell 212A SIA security protocol 2400 bps capacitive isolation parallel phone detection fast connect low-cost data access arrangement 8-SOIC exposed pad SOIC package family surface mount FCC JATE RoHS REACH
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ