STDP2650ADT - HDMI 1.4 DisplayPort Converter | Kinetic Technologies
MPN: STDP2650ADT ✗ پایان تولیدSTDP2650ADT نمای کلی
A DisplayPort-to-HDMI converter is a video interface IC that bridges two display standards. DisplayPort is primarily used by computers, docking stations, monitors, and embedded systems, while HDMI remains common in televisions, projectors, displays, and consumer AV equipment. The converter IC sits between a DisplayPort source and an HDMI sink, handling digital video conversion and associated control signaling. This makes the STDP2650ADT relevant to adapters, docking systems, industrial panels, commercial displays, and embedded video equipment.
The verified product information identifies the STDP2650ADT as an HDMI 1.4 video converter with I2C and SPI configuration control. Its 1.2 V to 3.3 V operating supply supports integration with low-voltage digital systems, while the 81-BGA package provides a compact surface-mount solution for multilayer PCB designs. The package format is intended for high-density equipment where connector placement, EMI control, and signal routing determine whether a converter can be implemented reliably.
Compared with passive DisplayPort-to-HDMI adapters, an active converter IC can support source negotiation, programmable operating parameters, and system-level control through I2C or SPI. The control interface allows firmware or system logic to identify supported display configurations and manage the converter within a larger video subsystem. Because the verified data does not provide resolution, refresh-rate, color-depth, propagation-delay, operating-temperature, or absolute-maximum details, those specifications should be confirmed in the manufacturer datasheet before release to production.
Typical uses include USB-C and Thunderbolt docking stations, DisplayPort-to-HDMI adapters, industrial HMI panels, digital signage, projector interfaces, and embedded display products. In these applications, the converter reduces the need for a separate external adapter and enables a compact board-level implementation. The design must still account for connector compliance, display timing support, power sequencing, ground continuity, and the impedance-sensitive high-speed signal paths.
The primary design consideration is that the converter does not remove the need for careful PCB implementation. DisplayPort and HDMI links are high-speed differential interfaces, so trace routing, connector launches, reference planes, and return paths directly affect signal integrity. The STDP2650ADT should be evaluated against the exact source and sink requirements, including HDMI version, supported display timing, HDCP requirements, audio behavior, and the target power architecture.
This page consolidates the verified distributor descriptions, package and interface information, sourcing links, and engineering guidance for the STDP2650ADT. It distinguishes confirmed data from specifications that still require datasheet confirmation, helping designers make a faster initial component-selection decision without treating unverified parameters as guaranteed capabilities.
جایگزین‌های drop-in برای STDP2650ADT — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینSTDP2650ADT مشخصات
| Product Type | Video Converter IC |
| Conversion Function | DisplayPort to HDMI |
| Display Standard | HDMI 1.4 |
| Control Interface | I2C, SPI |
| Supply Voltage Range | 1.2 V to 3.3 V |
| نوع نصب | Surface Mount |
| Supplier Device Package | 81-BGA (8 x 8 mm) |
| Package Form | 81-LFBGA |
| Moisture Sensitivity Level | MSL 3, 168 hours |
| وضعیت RoHS | ROHS3 compliant |
| REACH Status | REACH unaffected |
| ECCN | EAR99 |
| HTSUS Code | 8542.39.0001 |
راهنمای پیکربندی پین STDP2650ADT 81-lfbga
پیکربندی پین برای STDP2650ADT (پکیج 81-lfbga). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.
داده پین‌آوت تفصیلی موجود نیست برای STDP2650ADT.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
STDP2650ADT مناسب است برای 6 کاربردs: USB-C and Thunderbolt Docking Stations, DisplayPort-to-HDMI Adapter Boards, Industrial HMI and Control Panels, Digital Signage Players, Projector and Presentation Systems, Embedded Display and HMI Controllers.
USB-C and Thunderbolt Docking Stations
The STDP2650ADT fits a docking-station DisplayPort output stage when the product must present an HDMI 1.4 sink connection to a monitor or television. Its I2C and SPI control capability allows system firmware to configure the converter and integrate display management with the dock controller. The 81-BGA 8 x 8 mm surface-mount package supports dense multilayer PCB layouts, while the 1.2 V to 3.3 V supply range aligns with common digital logic rails. Engineers must still confirm lane mapping, supported display timings, HDCP requirements, connector compliance, and power sequencing in the manufacturer datasheet.
پیشنهادی
DisplayPort-to-HDMI Adapter Boards
The STDP2650ADT is appropriate for compact adapter boards that convert a DisplayPort source into an HDMI output. Its active converter architecture avoids the limitations of passive cable adapters and provides I2C or SPI control for configuration and system integration. The 81-BGA package reduces connector and converter footprint, although careful high-speed layout remains necessary because DisplayPort and HDMI differential pairs require controlled impedance and continuous return paths. The implementation should validate the exact supported resolutions, refresh rates, color formats, HDCP path, and audio capability before release.
پیشنهادی
Industrial HMI and Control Panels
The STDP2650ADT can serve the display-conversion block of an industrial human-machine interface when a controller outputs DisplayPort and the selected panel accepts HDMI. Its compact 81-BGA package is useful in panel electronics with limited board area, and the I2C or SPI interface can connect to an embedded control system for configuration and diagnostics. Production use requires verification of the operating-temperature range, electrical limits, supported timing, and lifecycle status because those details are not present in the supplied verified snippets.
پیشنهادی
Digital Signage Players
The STDP2650ADT is a practical candidate for digital-signage players and video-wall controller boards that need a local HDMI output. The HDMI 1.4 converter function allows DisplayPort-based processing silicon to drive a common display interface, while SPI or I2C control supports firmware-based configuration. The 81-BGA footprint helps preserve routing space for processors, memory, and network interfaces. Signage designs should verify the converter against the target panel's native timing, audio requirements, HDCP policy, temperature environment, and long-term supply expectations before schematic approval.
پیشنهادی
Projector and Presentation Systems
The STDP2650ADT can be used in presentation appliances that accept a computer-oriented DisplayPort stream but need to drive an HDMI projector or large display. The converter provides a board-level HDMI 1.4 output rather than requiring a passive adapter, and the available I2C or SPI paths support configuration by an embedded controller. Product-level compatibility depends on supported timing, pixel-clock limits, HDCP, audio behavior, and hot-plug handling. Connector shells, ESD protection, and source-device compatibility must also be verified with the complete display ecosystem.
پیشنهادی
Embedded Display and HMI Controllers
The STDP2650ADT suits embedded controller platforms that use a DisplayPort PHY internally but need an HDMI output for an external panel. Its compact 81-BGA package and low-voltage operating range fit modern mixed-signal board layouts, while I2C or SPI control enables register configuration from firmware. Since the verified sources do not disclose the complete pinout, supported resolutions, power-up behavior, or temperature limits, engineers should treat the manufacturer datasheet and reference layout as mandatory inputs to footprint, power, and signal-integrity reviews.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای STDP2650ADT — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
تفاوت‌های کلیدی
- Active HDMI 1.4 conversion (در مقابلPassive DisplayPort-to-HDMI adapters)
- Dual control-interface support (در مقابلSingle-interface converter configurations)
- High-density board integration (در مقابلLarger discrete or module-based conversion solutions)
یادداشت‌های طراحی
Treat the DisplayPort and HDMI links as high-speed differential interfaces. Route each pair with continuous reference planes, matched impedance, tightly controlled length skew, and minimal vias. Keep the converter, connector launches, ESD devices, and switching supplies arranged to avoid return-path discontinuities. Confirm the manufacturer's reference layout and ball assignments before releasing PCB artwork.
Design a clean 1.2 V to 3.3 V supply network with local decoupling placed directly beside the relevant BGA power and ground balls. Verify whether the converter requires multiple rails or staggered sequencing, since the verified snippets provide only the overall range. Use low-impedance power and ground planes and avoid routing noisy switching-current paths beneath the converter or between its high-speed balls.
Do not infer supported resolution, refresh rate, color depth, HDCP, or audio behavior from the HDMI 1.4 label alone. Validate the exact source timing and sink capabilities, including pixel clock and connector behavior. Also verify the complete 81-ball assignment and exposed-pad connection from the manufacturer datasheet; the public snippets in the supplied data are insufficient for a production pinout.
اطلاعات انطباق
The verified EXChips listing states ROHS3 compliant and REACH unaffected, with ECCN EAR99 and HTSUS 8542.39.0001. No verified data supports AEC-Q100 qualification, lead-free status, halogen-free status, or conflict-minerals compliance.
