STMicroelectronics

STM32F411VCH6 - 100MHz Cortex-M4 256KB MCU | STMicroelectronics

MPN: STM32F411VCH6 ✓ فعال
100-UFBGA, 7 mm x 7 mm Package 100 MHz Speed 256 KB Memory
حداقل سفارش: 1 |

STM32F411VCH6 نمای کلی

The STMicroelectronics STM32F411VCH6 is a 32-bit ARM Cortex-M4 microcontroller with a 100 MHz maximum clock, 256 KB of Flash memory, and a 100-ball UFBGA package measuring 7 mm by 7 mm. It combines a single-precision floating-point processor with extensive serial connectivity, making it suitable for compact embedded products that need efficient real-time control and USB connectivity without a large external memory system.

A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, input/output ports, timers, communication controllers, and supporting peripherals. The STM32F4 family belongs to the embedded-processor hierarchy: Cortex-M4 core, 32-bit microcontroller, embedded controller, and semiconductor. This device is designed for applications requiring deterministic control, moderate data throughput, and a broad selection of communication interfaces.

Verified distributor information identifies the STM32F411VCH6 as an ARM Cortex-M4 MCU with 100 MHz operation, 256 KB Flash, and a 100-UFBGA 7 mm by 7 mm package. A manufacturer-linked datasheet search result also describes the device as an STM32F4-series MCU with brown-out detection, DMA, PWM, watchdog, I2C, IrDA, LIN, MMC/SD/SDIO, SPI, UART/USART, USB OTG, and I2S support. The exact ordering-code temperature grade, voltage limits, pin names, and package ball map are not supplied in the verified web data and therefore remain explicitly unavailable below.

The Cortex-M4 architecture gives the device enough compute capability for sensor aggregation, motor and actuator control, human-interface input, logging, and USB-connected embedded equipment. Its 256 KB Flash is suitable for moderate firmware volumes, while the exact RAM capacity should be confirmed against the manufacturer datasheet before memory budgeting. The availability of USB OTG and multiple serial buses allows a compact board to connect sensors, displays, storage, and service peripherals without requiring a separate communications controller.

Typical designs place the MCU beside a crystal or clock source, power regulation, decoupling capacitors, input sensors, and output drivers. Designers should preserve the package ball assignments and decoupling requirements from the manufacturer reference design rather than inferring them from the distributor package description. USB differential routing, exposed thermal-management features, and any high-current I/O behavior also require layout review against the official datasheet.

For procurement, search results list STM32F411VCH6 at DigiKey, Mouser, LCSC, Octopart, WIN SOURCE, and other distributors. One LCSC result reports an in-stock price from $2.7474, while another source reports $5.33340; those values are not treated as a universal current price because quantity, stock, and region are not fully specified. This page separates verified facts from missing technical details and identifies the exact procurement sources used.

جایگزین‌های drop-in برای STM32F411VCH6 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای STM32F411VCH6 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Communication Interfaces, Flash Memory, Package, ADC, Operating Temperature.

STMicroelectronics
Communication Interfaces: USB OTG FS, 3x USART, 4x SPI, 3x I2C, 2x I2S, 1x SDIO
Flash Memory: 256 KB (256K x 8)
Package: 100-ball UFBGA (7x7 mm, 0.5 mm pitch)
مقایسه با STM32F411VCH6 →
STMicroelectronics
Communication Interfaces: USART, SPI, I2C, I2S, SDIO, USB OTG FS
Flash Memory: 512 KB
Package: 48-UFQFPN (7x7 mm) exposed pad
مقایسه با STM32F411VCH6 →
STMicroelectronics
Communication Interfaces: 3x USART, 5x SPI, 3x I2C, 1x SDIO, 1x USB OTG FS, 1x CAN
Flash Memory: 512 KB (512K x 8)
Package: 64-LQFP (10x10 mm)
مقایسه با STM32F411VCH6 →

STM32F411VCH6TR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 100-UFBGA (7x7 mm)
Potential ordering-code variant with the same STM32F411VCH6 family and 100-UFBGA package; exact pin, temperature, and tape-and-reel details require manufacturer confirmation

📋 جایگزین مرجع (خارج از کاتالوگ)

STM32F411RC

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 100-UFBGA (7x7 mm)
Potential same-family STM32F411 replacement with a 100-UFBGA package, but package pinout, memory, and peripheral compatibility are not verified in the supplied data

📋 جایگزین مرجع (خارج از کاتالوگ)

STM32F411CEU6

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
STMicroelectronics
📦 100-UFBGA (7x7 mm)
ARM Cortex-M4F 32-bit · 100 MHz · 512 KB · 128 KB · 125 DMIPS / 1.25 DMIPS/MHz · 1.7 V to 3.6 V · -40 C to +85 C · 48-UFQFPN (7x7 mm) exposed pad

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

STM32F411RET6

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
STMicroelectronics
📦 100-UFBGA (7x7 mm)
ARM Cortex-M4F 32-bit · 32-bit · 100 MHz · 125 DMIPS · 512 KB (512K x 8) · 128 KB · 1.7 V to 3.6 V · -40C to +85C

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

STM32F411VE

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 100-UFBGA (7x7 mm)
Potential same-family STM32F411 candidate with a 100-UFBGA package, but exact Flash size, pinout, and temperature-grade compatibility are unverified

📋 جایگزین مرجع (خارج از کاتالوگ)

STM32F411VCH6 حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 32-bit ARM Cortex-M4 microcontroller
Core ARM Cortex-M4
Architecture 32-bit
Maximum Clock 100 MHz
Flash Memory 256 KB
بسته‌بندی 100-UFBGA, 7 mm x 7 mm
نوع نصب Surface mount
Number of I/O 81 I/O
ADC 1 ADC
Communication Interfaces I2C, IrDA, LINbus, MMC/SD/SDIO, SPI, UART/USART, USB OTG, I2S
Peripheral Functions Brown-out detection/reset, DMA, PWM, watchdog, I2S
Number of Timers 11 timers
Program Memory Type Flash

راهنمای پیکربندی پین STM32F411VCH6 100-ufbga, 7 mm x 7 mm

پیکربندی پین برای STM32F411VCH6 (پکیج 100-ufbga, 7 mm x 7 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 100-ufbga, 7 mm x 7 mm برای STM32F411VCH6

داده پین‌آوت تفصیلی موجود نیست برای STM32F411VCH6.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

STM32F411VCH6 مناسب است برای 6 کاربردs: USB-connected industrial control, Sensor and data acquisition, Human-interface and embedded control, USB data logger, Motor and actuator control, Portable and consumer electronics.

🏭

USB-connected industrial control

The STM32F411VCH6 fits compact USB-connected control products because its verified 100 MHz ARM Cortex-M4 core provides responsive control processing and the listed USB OTG interface supports a direct host or device connection. A controller can manage sensors, digital outputs, and configuration commands while using the 256 KB Flash for application firmware. The design trade-off is that USB signal integrity, power sequencing, and firmware class support must be validated against the official package documentation.

🧩

Sensor and data acquisition

The STM32F411VCH6 is suitable for sensor aggregation and compact data-acquisition systems because it lists one ADC, DMA, I2C, SPI, UART/USART, and USB OTG. The 100 MHz core can coordinate acquisition timing and communication, while 256 KB Flash provides room for a moderately sized embedded application. The exact ADC resolution, sampling rate, timer limits, and electrical specifications are not present in the verified data and must be checked in the manufacturer datasheet.

🔧

Human-interface and embedded control

The STM32F411VCH6 can serve as the control MCU for a compact human-interface product such as a panel, controller, or programmable automation node. Its verified 100 MHz Cortex-M4 core and listed UART/USART, I2C, SPI, PWM, and DMA resources provide the processing and communication blocks expected in embedded control systems. Designers should confirm package ball assignments and peripheral alternate functions because the supplied data does not include a complete verified pinout.

🖥️

USB data logger

The STM32F411VCH6 is a reasonable starting point for a USB data logger because it combines a 100 MHz Cortex-M4 core with USB OTG, UART/USART, SPI, I2C, and DMA connectivity. The logger can buffer information from external sensors or modules and present a configuration or data interface over USB. The main engineering concern is firmware and storage architecture: the verified data confirms 256 KB Flash but does not confirm RAM, external memory support, or USB implementation details.

🏭

Motor and actuator control

The STM32F411VCH6 can support embedded motor or actuator-control functions where deterministic control, PWM, timers, and serial communication are useful. Its verified 100 MHz Cortex-M4 core supplies general-purpose processing, while the listed 11 timers, PWM support, DMA, and communication interfaces help coordinate motion commands and feedback. Exact timer channel counts, encoder interfaces, current ratings, and pin availability require the official STM32F411VCH6 documentation before selecting the package.

📱

Portable and consumer electronics

The STM32F411VCH6 can be used in portable embedded products that need local control, sensor communication, and USB connectivity in a compact surface-mount footprint. The verified 100-UFBGA package is 7 mm by 7 mm, which can simplify high-density layouts when ball escape and assembly capability are available. The device is not automatically a drop-in replacement for another MCU: power budget, memory, firmware, and package-ball compatibility must be established independently.

What is the STM32F411VCH6?
The STM32F411VCH6 is a STMicroelectronics 32-bit ARM Cortex-M4 microcontroller rated for 100 MHz operation with 256 KB of Flash memory. Distributor information identifies the package as 100-UFBGA measuring 7 mm by 7 mm. According to the verified STM32F411VCH6 listing, it also supports I2C, IrDA, LINbus, MMC/SD/SDIO, SPI, UART/USART, USB OTG, and I2S, making it a compact embedded controller for connected real-time products.
What are the key specifications of STM32F411VCH6 that engineers should know?
The main verified specifications are a 32-bit ARM Cortex-M4 core, 100 MHz maximum clock, 256 KB of Flash memory, and a 100-UFBGA package measuring 7 mm by 7 mm. The device is also identified as having 81 I/O, one ADC, 11 timers, DMA, PWM, watchdog, brown-out detection/reset, and several serial interfaces. Exact RAM, voltage range, temperature range, and complete pin functions require the manufacturer datasheet.
What is the maximum operating frequency of STM32F411VCH6?
The STM32F411VCH6 maximum operating frequency is 100 MHz, according to the verified DigiKey product listing. This clock rate supports responsive embedded control and moderate peripheral data processing. The actual operating frequency, peripheral clock configuration, and maximum performance conditions should still be checked against the official STMicroelectronics datasheet before final firmware and power-budget release.
Where can I download the STM32F411VCH6 datasheet PDF?
The verified datasheet search points to the STM32F411VCH6 datasheet page at https://www.datasheets.com/stmicroelectronics/stm32f411vch6 and also provides an accessible PDF mirror at https://www.abc-semi.com/datasheets/STM32F411VCH6.pdf. Because the verified data does not provide a document number, revision, or page count, engineers should use the manufacturer-hosted documentation when available and verify the ordering-code-specific package details.
Where can I find the STM32F411VCH6 pinout?
The STM32F411VCH6 pinout is associated with its 100-UFBGA 7 mm by 7 mm package, but a verified ball-by-ball pin list is not present in the supplied web data. The STM32F411VCH6 datasheet and package drawing must therefore be used for authoritative ball assignments, power pins, ground pins, and exposed-pad details. Do not assign GPIO functions from the distributor summary alone.
What communication interfaces does STM32F411VCH6 support?
The verified device data lists I2C, IrDA, LINbus, MMC/SD/SDIO, SPI, UART/USART, USB OTG, and I2S connectivity. It also identifies DMA and PWM peripherals, which help move data efficiently and generate timed outputs. Interface availability, alternate-function mapping, operating modes, and electrical limits must be confirmed in the package-specific manufacturer documentation before schematic capture.
Is STM32F411VCH6 suitable for USB-connected embedded devices?
Yes, the STM32F411VCH6 is suitable for USB-connected embedded devices because the verified specifications identify USB OTG connectivity and a 100 MHz Cortex-M4 core. The MCU can serve as the system controller for compact data acquisition, configuration, logging, or peripheral-control products. USB routing, power, firmware support, and device-class requirements should be validated against the manufacturer datasheet and selected development platform.
Is STM32F411VCH6 in stock?
Stock status is distributor-dependent. The verified LCSC search result states that STM32F411VCH6 is in stock, while other search results provide distributor links without a reliable live quantity. XAIPART therefore treats availability as unknown for its own offer and uses BackOrder rather than claiming XAIPART inventory. Confirm the current stock, lead time, and authorized-channel status directly with the selected distributor as of 2026-10-22.
Where to buy STM32F411VCH6 online?
STM32F411VCH6 can be sourced from the verified distributor listings at DigiKey, Mouser, LCSC, WIN SOURCE, and Octopart. The LCSC result reports a starting price of $2.7474, but the available quantity, regional pricing, and fulfillment terms are not supplied. For production procurement, compare authorized-channel pricing and stock directly before issuing a purchase order.
What is the price of STM32F411VCH6?
The verified LCSC result lists STM32F411VCH6 from $2.7474, while a separate source reports $5.33340 for a different listing or market context. These are source-specific reference prices, not guaranteed XAIPART quotes, and the pricing date is 2026-10-22. Confirm the exact quantity tier, currency, tax, shipping, and current inventory before making a purchasing decision.
What is the lead time for STM32F411VCH6?
The supplied distributor results do not provide a verifiable lead time for STM32F411VCH6. DigiKey and Mouser offer purchase links, and LCSC indicates that the part is in stock, but those snippets do not state factory lead time, allocation status, or guaranteed delivery dates. Request a current quotation from the distributor or XAIPART; the verified data does not support a numeric lead-time claim.
How do STM32F411VCH6 and STM32F302VCT6 compare?
The supplied comparison search identifies STM32F302VCT6 as a comparison candidate for STM32F411VCH6, but it does not provide verified specifications proving pin compatibility. STM32F411VCH6 is specified at 100 MHz with 256 KB Flash in a 100-UFBGA package, while the STM32F302VCT6 data is not included in the verified target record. Treat it as a comparison lead only, not a drop-in replacement, until package, memory, peripheral, and pin data are confirmed.
Can I use STM32F411VCH6 for an STM32F411-based product?
Yes, STM32F411VCH6 is an STM32F411-family device and can serve as the MCU for an STM32F411-based product when the design uses its 256 KB Flash, 100 MHz Cortex-M4 core, 100-UFBGA package, and listed peripherals. Software, pin multiplexing, memory size, clock setup, and package-specific requirements must match the selected board revision. The supplied data does not verify firmware or board-level compatibility.
What is the best drop-in replacement for STM32F411VCH6?
No verified drop-in replacement is established by the supplied cross-reference search results. The results provide general STM32 alternative guides and comparison tools, but no candidate is confirmed to match the STM32F411VCH6 100-UFBGA footprint, ball assignments, memory configuration, and peripheral requirements. A valid replacement must be selected only after package and pin compatibility are proven from manufacturer documentation.
What can replace STM32F411VCH6?
The verified data does not identify a part that can directly replace STM32F411VCH6 on the same footprint. STM32 alternatives can differ in memory, USB implementation, peripheral mapping, clock architecture, and package ballout even when they use a similar ARM core. Review the official STM32F411VCH6 datasheet and compare candidate datasheets; do not approve a replacement solely from a generic MCU compatibility article.
Is STM32F411VCH6 the same as STM32F302VCT6?
No, the supplied data does not establish that STM32F411VCH6 and STM32F302VCT6 are the same part or pin-compatible replacements. STM32F411VCH6 is verified as a 100 MHz Cortex-M4 MCU with 256 KB Flash in 100-UFBGA, whereas the verified search result only states that STM32F302VCT6 is a comparison candidate. Their package, memory, peripherals, and pin functions must be compared before substitution.
How should I design the PCB around STM32F411VCH6?
Start with the manufacturer package drawing and reference schematic, then preserve all power, ground, decoupling, reset, clock, and exposed-pad connections. Keep high-speed USB traces short and controlled, provide clean return paths, and separate sensitive analog or sensor routing from switching and high-current paths where practical. Because no verified pinout or package drawing is supplied, final ball assignments must not be guessed.
Does STM32F411VCH6 support RoHS or REACH compliance?
The supplied verified web data does not state whether STM32F411VCH6 is RoHS compliant, REACH compliant, lead-free, or halogen-free. Compliance values are therefore recorded as unknown rather than inferred from the manufacturer name or general semiconductor practice. Request the current STMicroelectronics material-compliance declaration or product documentation for the exact ordering code before making a compliance declaration.

داده‌های مرجع مهندسی برای STM32F411VCH6 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose STM32F411VCH6 when the design needs the verified combination of a 100 MHz ARM Cortex-M4 core, 256 KB Flash, USB OTG, and a compact 100-UFBGA 7 mm by 7 mm package. It is a strong starting point for USB-connected control, sensor aggregation, data logging, and embedded actuator systems, subject to confirming RAM, voltage, temperature, and pin assignments. The supplied data does not establish a verified drop-in substitute. Treat same-family candidates as replacement leads only until their package ballouts, memory, peripherals, and ordering codes are checked against the official datasheets. For production sourcing, compare current authorized-distributor stock, price, and lead time as of 2026-10-22 rather than relying on a single search-result price.

مقایسه با جایگزین‌ها

پارامتر این محصول STM32F411VCH6TR STM32F411RC STM32F411CE STM32F411RE STM32F411VE
Package 100-UFBGA (7x7 mm) 100-UFBGA (7x7 mm) - candidate package stated for comparison 100-UFBGA (7x7 mm) - candidate package stated for comparison 100-UFBGA (7x7 mm) - candidate package stated for comparison 100-UFBGA (7x7 mm) - candidate package stated for comparison 100-UFBGA (7x7 mm) - candidate package stated for comparison
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics

تفاوت‌های کلیدی

  • Verified Cortex-M4 processing target (در مقابلGeneric STM32 alternative candidates)
  • Broad verified serial connectivity (در مقابلSTM32F302VCT6)
  • Compact 100-UFBGA footprint (در مقابلLarger-package STM32 MCUs)

یادداشت‌های طراحی

Use the manufacturer package drawing as the source of truth for every STM32F411VCH6 ball. Keep decoupling paths short and place power-entry components close to the relevant supply balls. The supplied data identifies a 100-UFBGA 7 mm by 7 mm package but does not include a verified ball map, so do not finalize a footprint, escape routing, or exposed-pad connection from a distributor snippet alone.

If the design uses USB OTG, route the differential pair as a controlled impedance pair over a continuous reference plane and minimize branch points and stubs. Keep the pair away from noisy switching nodes and provide a deliberate return path. The exact USB electrical limits and ball assignments must be confirmed from the STM32F411VCH6 manufacturer documentation before sign-off.

Do not treat the reported 100 MHz CPU frequency, 256 KB Flash, or 81 I/O count as a complete memory and pinout specification. RAM, supply voltage, temperature limits, alternate-function mappings, and ADC details are marked DATA_NEEDED because they are absent from the verified data. Validate bootloader support, firmware image size, peripheral assignments, and brown-out behavior against the exact ordering code before production release.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The supplied web results do not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for STM32F411VCH6. Obtain the current manufacturer compliance documentation for the exact ordering code before making a formal claim.

تاریخ تأیید داده‌ها: 2026-10-22 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

STM32F411VCH6 STM32F411VCH6 datasheet STMicroelectronics STM32F411VCH6 STM32F411VCH6 100 MHz Cortex-M4 STM32F411VCH6 256KB Flash STM32F411VCH6 100-UFBGA STM32F411VCH6 USB OTG microcontroller STM32F411VCH6 vs STM32F302VCT6 STM32F411VCH6 drop-in replacement STM32F411VCH6 buy price STM32F411VCH6 pinout STM32F411VCH6 lead time

قطعات و اصطلاحات مرتبط

STMicroelectronics STM32F411VCH6 STM32F411 family ARM Cortex-M4 32-bit microcontroller embedded controller semiconductor 256 KB Flash 100 MHz 100-UFBGA 7 mm by 7 mm package USB OTG I2C SPI UART/USART DMA PWM ADC I2S LINbus IrDA MMC/SD/SDIO watchdog brown-out detection/reset embedded product
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ