STM32G031K8T3 - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics
MPN: STM32G031K8T3 ✓ فعالSTM32G031K8T3 نمای کلی
A microcontroller is a programmable integrated circuit containing a processor core, memory, and peripherals such as GPIO, timers, communication interfaces, and analog conversion blocks. The STM32G0 family is positioned as a mainstream embedded platform for cost-sensitive industrial, consumer, and instrumentation products. Its Cortex-M0+ architecture provides a 32-bit instruction set while maintaining an efficient design for control-oriented workloads.
The STM32G031K8T3 combines a maximum operating frequency of 64 MHz with 64 KB of Flash for firmware storage and 8 KB of SRAM for working memory. The manufacturer describes the STM32G031x4, x6, and x8 devices as mainstream microcontrollers based on the Arm Cortex-M0+ core. The package configuration provides a practical option for designs requiring a moderate pin count and a conventional LQFP assembly process.
Typical embedded applications include compact sensor controllers, small motor-control boards, industrial monitoring modules, consumer appliances, and low-cost communication equipment. The device is appropriate when the application needs more processing capability than a simple 8-bit controller but does not require the memory capacity or peripheral complexity of a higher-end Cortex-M processor.
For PCB design, use the manufacturer pinout description when assigning the 32 LQFP connections and provide the required power, decoupling, ground, and programming interfaces according to the datasheet. Confirm the exact voltage limits, clock configuration, peripheral availability, and package pin definitions for STM32G031K8 variants before releasing a board layout.
This page consolidates the manufacturer product information, package details, practical application guidance, and design considerations for engineers evaluating the STM32G031K8T3 as a compact 64 MHz Cortex-M0+ MCU.
جایگزین‌های drop-in برای STM32G031K8T3 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای STM32G031K8T3 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Flash Memory, Mounting Type, Communication Interfaces.
STM32G031K8T6
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32G031K8T7
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32G031K8T8
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
STM32G031K8T3TR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
STM32G071KBU7TR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
STM32G031K8T3 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 32-bit Arm Cortex-M0+ microcontroller |
| Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 64 KB |
| SRAM | 8 KB |
| Flash Organization | 64K x 8 bits |
| Word Size | 32-bit |
| Instruction Set | Arm Cortex-M0+ RISC |
| بسته‌بندی | 32-pin LQFP (7 mm x 7 mm) |
| نوع نصب | Surface mount |
| محدوده دمای کاری | -40°C to +125°C (STM32G031K8 family information) |
| Internal Core Supply | VCORE generated by an embedded linear voltage regulator |
| ولتاژ مرجع | VREF+ internally connected with VDD on packages without VREF+ pin |
| SRAM Protection | Hardware parity check |
راهنمای پیکربندی پین STM32G031K8T3 32-pin lqfp (7 mm x 7 mm)
پیکربندی پین برای STM32G031K8T3 (پکیج 32-pin lqfp (7 mm x 7 mm)). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای STM32G031K8T3.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
STM32G031K8T3 مناسب است برای 6 کاربردs: Compact Sensor Controller, Industrial Monitoring Module, Small Motor Control, Low-Cost Communication Node, Consumer Appliance Controller, Portable Measurement Instrument.
Compact Sensor Controller
The STM32G031K8T3 fits compact sensing and data-acquisition modules where an 8-bit controller would be limiting but a larger MCU would be unnecessary. Its 64 MHz Arm Cortex-M0+ core provides faster control and peripheral processing than a basic 8-bit architecture, while 64 KB of Flash and 8 KB of SRAM are sufficient for embedded firmware, calibration data, and short working buffers. The 32-LQFP package also supports conventional surface-mount assembly. During design, verify that the selected temperature grade and exact pinout meet the sensor module’s supply, interface, and environmental requirements.
پیشنهادی
Industrial Monitoring Module
The STM32G031K8T3 is suitable for industrial monitoring modules that combine digital inputs, status indicators, local data handling, and periodic communication. A 64 MHz Cortex-M0+ core can execute control logic and communication tasks, while the 64 KB Flash capacity supports application firmware and 8 KB of SRAM supports short acquisition or protocol buffers. The 32-pin LQFP format is practical for compact boards built with mainstream assembly processes. Check the exact peripheral mix, supply limits, and operating-temperature requirements for each monitored channel.
پیشنهادی
Small Motor Control
The STM32G031K8T3 can serve as the controller in a small stepper, DC motor, or actuator-control module when the design requires more timing precision than a simple relay controller. Its 64 MHz Cortex-M0+ core supports faster control-loop execution, while the 8 KB of SRAM can hold position, velocity, and control-state variables. The 64 KB of Flash provides room for firmware without moving to a larger memory device. The designer must verify timer channels, PWM outputs, ADC resources, and any required safety limits against the selected pin mapping.
پیشنهادی
Low-Cost Communication Node
The STM32G031K8T3 is appropriate for compact protocol converters, remote I/O nodes, and low-cost communication controllers. The 64 MHz Cortex-M0+ processor can service packet processing and control tasks, while 64 KB of Flash and 8 KB of SRAM suit moderate firmware sizes and bounded network buffering. Its 32-LQFP package simplifies board implementation where a small but conventional surface-mount footprint is preferred. Select a transceiver according to the physical network, then verify clock accuracy, peripheral availability, and firmware timing for the intended baud rate and protocol stack.
پیشنهادی
Consumer Appliance Controller
The STM32G031K8T3 can control compact consumer appliances where the MCU must coordinate buttons, indicators, sensors, and a small actuator or communication subsystem. Its 64 MHz Cortex-M0+ core and 64 KB of Flash provide ample performance for mainstream embedded logic, while the 32-LQFP package supports automated PCB assembly. Eight kilobytes of SRAM provides working space for state machines, debouncing, and small display buffers. Validate the exact GPIO count, timer outputs, analog inputs, and temperature grade needed for the appliance’s mechanical and environmental requirements.
پیشنهادی
Portable Measurement Instrument
The STM32G031K8T3 supports portable measurement instruments that combine local sensing, control, and a serial data interface. Its 64 MHz processor can manage acquisition timing and UI state, while 64 KB of Flash accommodates firmware and 8 KB of SRAM supports working buffers. The small 7 mm by 7 mm 32-LQFP package helps reduce board size in handheld or panel-mounted products. The design should confirm the required ADC, timer, display interface, and communication peripherals, and should use the STMicroelectronics pin table for final signal assignments.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای STM32G031K8T3 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | STM32G031K8T6 | STM32G031K8T7 | STM32G031K8T8 | STM32G031K8T3TR | STM32G071KBU7TR |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 32-LQFP (7x7) | 32-LQFP (7x7) | 32-LQFP (7x7) | 32-LQFP (7x7) | 32-LQFP (7x7) | 32-LQFP (7x7) |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| Product Family | STM32G0 mainstream | STM32G0 mainstream | STM32G0 mainstream | STM32G0 mainstream | STM32G0 mainstream | STM32G0 |
تفاوت‌های کلیدی
- Mainstream 64 MHz Cortex-M0+ performance with 64 KB Flash (در مقابلSTM32G071KBU7TR)
- Extended-temperature ordering option (در مقابلSTM32G031K8T6)
- Same functional silicon with an orderable packing designation (در مقابلSTM32G031K8T3TR)
یادداشت‌های طراحی
Use the manufacturer electrical-characteristics and pin-description sections to define the external supply, decoupling network, and VCORE requirements. VCORE is produced internally for digital peripherals, SRAM, and Flash, but the external input rail still requires a low-impedance source and correctly placed local bypass capacitors. Check the power-up and reset sequencing requirements before combining the MCU with sensors, transceivers, or actuators.
Assign all 32 LQFP nets from the STM32G031K8 datasheet pin table and preserve the exposed thermal and electrical requirements of the selected package variant. Place decoupling capacitors close to their associated supply pins, route the debug and programming interface to accessible test pads, and keep sensitive analog inputs away from fast-switching nodes. Review package drawings from the manufacturer rather than scaling a generic 32-LQFP footprint.
Do not assume that all STM32G031K8 order codes are electrically identical. The T3, T6, T7, and T8 suffixes can represent different temperature grades, so a board intended for +125°C operation must not be populated automatically with a lower-grade part. Likewise, verify the pin arrangement of packages without a dedicated VREF+ pin, where VREF+ is internally connected with VDD.
Plan the clock, reset, boot, and debug connections early because changes to these routes can affect layout and test coverage. Provide a reliable ground reference under the MCU and return high-current or switching-node paths away from analog and communication signals. Use the datasheet’s recommended application circuit and decoupling topology as the baseline, then validate timing and EMC performance on the finished board.
اطلاعات انطباق
The manufacturer and distributor information confirms the device, package, core, frequency, and memory resources but does not provide specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statements for this exact order code.
