Microchip Technology

SY88713VKI - 3.3V/5V 622Mbps Limiting Postamp | Microchip

MPN: SY88713VKI ✓ فعال
3.3 V or 5 V Vdss 10-MSOP (0.118 inch, 3.00 mm wide) Package
حداقل سفارش: 1 |

SY88713VKI نمای کلی

The Microchip SY88713VKI is a 3.3 V or 5 V limiting postamplifier IC designed for optical-network signal paths, with a stated operating data rate of 622 Mbps in a 10-MSOP package. The device combines a postamplifier function with signal limiting in one compact surface-mount IC, reducing the component count required around a high-speed optical receiver.

A limiting postamplifier is a specialized linear-amplifier IC that restores the amplitude of small signals after photodiode reception and limits the resulting waveform to a suitable digital-logic range. In the broader semiconductor hierarchy, it belongs to the amplifier family, then to linear amplifiers, and ultimately to signal-conditioning and interface ICs. Its purpose is to improve the transition quality and voltage compatibility of a recovered optical signal before that signal reaches a clock-recovery, demultiplexing, or decision-circuit stage.

The SY88713VKI supports both 3.3 V and 5 V operating environments, allowing it to fit legacy 5 V optical-interface designs as well as newer lower-voltage equipment. Its 622 Mbps capability places it in the class of components commonly associated with SONET/SDH-class optical backplanes and other high-speed fiber-optic links. The 10-MSOP package, also described as 10-TFSOP, supports compact surface-mount assembly while keeping the lead count manageable.

The SY88713VKI is identified as a single-chip amplifier solution for power-management applications and as a limiting postamplifier for optical networks. Its 10-MSOP package is only 0.118 inch, or 3.00 mm, wide. This narrow package can simplify routing in compact transceiver modules, although designers must account for lead pitch, exposed thermal behavior, and the high-speed layout requirements associated with PECL signal paths.

Typical uses include optical receiver modules, fiber-optic network interface equipment, clock-recovery front ends, and telecom line-card signal conditioning. In these systems, the amplifier can sit after the photodetector and before a limiting or digital decision stage. The system designer should verify the complete receiver chain, including input coupling, biasing, termination, supply decoupling, and the voltage levels expected by the following device.

Layout is a primary design consideration for this amplifier. Keep high-speed signal paths short and continuous, use controlled-impedance routing where channel-loss and reflection budgets require it, and place decoupling capacitors close to the supply pins. Avoid sharing narrow return-current paths with unrelated noisy circuits, and follow the manufacturer datasheet pin-description table when assigning every MSOP connection and unused pin.

This product page combines the manufacturer-device identity, exact package information, operating-voltage and speed details, sourcing guidance, and practical high-speed layout guidance in one engineering-focused reference. It is intended to help engineers confirm footprint, interface requirements, and replacement strategy before integrating the SY88713VKI into an optical communication design.

جایگزین‌های drop-in برای SY88713VKI — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

SY88713VKI حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Limiting postamplifier IC
ولتاژ تغذیه 3.3 V or 5 V
Operating Data Rate 622 Mbps
Signal Standard PECL
بسته‌بندی 10-MSOP (0.118 inch, 3.00 mm wide)
Alternative Package Description 10-TFSOP
نوع نصب Surface mount
Application Optical networks
Architecture Single-chip amplifier solution

راهنمای پیکربندی پین SY88713VKI 10-tfsop

پیکربندی پین برای SY88713VKI (پکیج 10-tfsop). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 10-tfsop برای SY88713VKI

داده پین‌آوت تفصیلی موجود نیست برای SY88713VKI.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

SY88713VKI مناسب است برای 6 کاربردs: 622 Mbps Optical Receiver Modules, Fiber-Optic Network Interfaces, Telecom Line-Card Signal Conditioning, Clock-Recovery Front Ends, SONET-Class Optical Backplanes, Compact Optical Transceivers.

🌐

622 Mbps Optical Receiver Modules

The SY88713VKI fits the signal-conditioning stage of a 622 Mbps optical receiver because it combines a postamplifier and limiting function in one device. It operates from 3.3 V or 5 V, allowing implementation in both conventional 5 V telecom designs and lower-voltage transceiver modules. Place it after the photodetector and before the clock-recovery or decision circuitry. The primary design trade-off is the 10-MSOP footprint, which saves board area but requires careful high-speed layout and correct pin assignment from the manufacturer pin table.

🌐

Fiber-Optic Network Interfaces

The SY88713VKI is suitable for a fiber-optic network interface requiring a compact PECL signal-conditioning stage at rates up to 622 Mbps. Its 3.3 V and 5 V compatibility supports both legacy and lower-voltage interface architectures. The IC can recover signal amplitude and limit the waveform after the photodetector, reducing the need for separate gain and limiting stages. Engineering attention should remain on termination, biasing, impedance continuity, and power-supply decoupling because the amplifier cannot compensate for an incorrectly designed receiver interface.

🏭

Telecom Line-Card Signal Conditioning

In telecom line-card circuitry, the SY88713VKI can provide a dedicated 622 Mbps limiting postamplifier stage between an optical detector and downstream digital logic. Its support for both 3.3 V and 5 V supplies allows reuse across different line-card generations. The 10-MSOP package supports compact assembly, while the stated single-chip amplifier architecture simplifies the signal path. Verify board-level channel loss, allowable jitter, signal levels, and thermal conditions before using the device in a new line-card design.

⚡

Clock-Recovery Front Ends

The SY88713VKI can serve as the limiting stage immediately preceding a clock-recovery circuit in a 622 Mbps optical link. Amplitude recovery and waveform limiting help establish the signal level expected by the downstream digital phase-locked loop or decision circuit. Because the device supports 3.3 V and 5 V operation, it can be evaluated in systems with either supply architecture. The design must preserve edge quality through short traces, suitable terminations, clean references, and a layout that minimizes parasitic coupling into the high-speed path.

🖥️

SONET-Class Optical Backplanes

The SY88713VKI's stated 622 Mbps operating rate makes it relevant to SONET-class and comparable optical backplane receiver paths. It provides a dedicated limiting-postamplifier function in a narrow 10-MSOP package, allowing several conditioning channels to fit into a compact transceiver area. Operating from 3.3 V or 5 V provides flexibility across board generations. When planning the backplane, account for connector and trace loss, return loss, receiver sensitivity, and the available power budget rather than relying on data rate alone.

🔧

Compact Optical Transceivers

The SY88713VKI is appropriate for compact optical-transceiver designs that need postamplification and limiting close to the photodetector. Its 0.118 inch-wide 10-MSOP package reduces connector spacing, and its 3.3 V or 5 V operation supports different transceiver supply plans. Keeping the amplifier near the detector can limit sensitivity to trace loss and external interference, but it also places high-speed layout constraints directly into a small assembly. Follow the manufacturer pin and grounding recommendations and provide local supply bypassing with minimal loop area.

What is the SY88713VKI?
The SY88713VKI is a 3.3 V or 5 V limiting postamplifier IC optimized for 622 Mbps optical-network signals. According to the Microchip manufacturer datasheet, it is a single-chip amplifier solution for power-management applications and uses a 10-MSOP package measuring 0.118 inch, or 3.00 mm, in width. Its primary role is to condition and limit a recovered high-speed optical signal before subsequent receiver logic.
What is the operating voltage of SY88713VKI?
The SY88713VKI operates from either a 3.3 V or 5 V supply. The Microchip manufacturer datasheet identifies it as a 3.3 V/5 V limiting postamplifier, making it usable in both older 5 V optical-interface equipment and lower-voltage 3.3 V systems. Use the Request a Quote form on this page to confirm current availability, lot conditions, and the configuration appropriate for the target assembly.
What is the maximum data rate of SY88713VKI?
The SY88713VKI is specified for operation up to 622 Mbps. The Microchip manufacturer datasheet describes the device as a low-power limiting postamplifier for 3.3 V and 5 V operation at this data rate. This makes it applicable to optical receiver signal chains operating below that ceiling, including telecom and optical-network interface designs.
Where can I find the SY88713VKI datasheet PDF and pinout?
The SY88713VKI datasheet and pinout should be obtained from the Microchip manufacturer documentation associated with the device. The manufacturer datasheet identifies a 10-MSOP or 10-TFSOP package and specifies the limiting-postamplifier function. Use the pin-description table and package drawing in that document when assigning signals; request the current manufacturer documentation through the Request a Quote form on this page.
What package does the SY88713VKI use?
The SY88713VKI is supplied in a 10-MSOP package, also described as a 10-TFSOP measuring 0.118 inch, or 3.00 mm, in width. The Microchip manufacturer datasheet identifies it as a surface-mount device. Confirm the lead pitch, pin numbering, and land pattern from the package drawing before releasing a PCB footprint.
Is SY88713VKI suitable for optical receiver modules?
Yes, the SY88713VKI is suitable for a post-photodiode amplification and limiting stage in optical receiver modules. Its stated 622 Mbps operating rate and 3.3 V or 5 V supply compatibility fit high-speed optical-network interfaces. System performance still depends on the complete receiver chain, including optical-to-electrical conversion, input biasing, trace losses, and the voltage requirements of the following logic stage.
Where can I buy SY88713VKI online?
The SY88713VKI can be requested for quotation through the Request a Quote form on this page. The form is the appropriate route for confirming current stock, minimum order quantity, lead time, and the exact package or shipping configuration. No static stock statement should be inferred from a distributor search result because availability can change without notice.
What is the price of SY88713VKI?
Current commercial pricing for the SY88713VKI should be confirmed through the Request a Quote form on this page. The structured pricing area is designed to reflect current sourcing conditions without embedding a potentially stale figure in technical copy. Submit the required quantity, target package, and delivery location so the appropriate commercial response can be prepared.
What is the lead time for SY88713VKI?
The current lead time for SY88713VKI depends on stock, package configuration, order quantity, and manufacturing status. Request a quotation through the Request a Quote form on this page and state the required quantity and delivery schedule. For production planning, obtain written confirmation of lead time and traceability requirements before committing the optical module to a build schedule.
Is SY88713VKI in stock?
Current stock for SY88713VKI should be confirmed through the Request a Quote form on this page. Search listings can identify potential inventory, but they do not guarantee allocatable quantity at the time of purchase. Specify the exact MPN, package, and shipment quantity in the request so inventory and lead time can be confirmed together.
What can replace SY88713VKI?
A valid replacement for SY88713VKI must use the same 10-MSOP footprint, preserve pin-to-pin connectivity, and support the required 3.3 V or 5 V PECL interface at 622 Mbps. No confirmed drop-in substitute is listed here because the available cross-reference results do not establish package, pinout, and electrical compatibility together. Use the Request a Quote form to discuss sourcing support for a qualified replacement review.
What is the best drop-in replacement for SY88713VKI?
No confirmed drop-in replacement can be identified for the SY88713VKI from the available manufacturer and cross-reference information. The required checks are identical 10-MSOP land pattern, identical pin assignments, operation from 3.3 V or 5 V, and adequate performance for a 622 Mbps PECL signal path. Submit the candidate MPN and circuit requirements for engineering review rather than treating a similar amplifier description as proof of replacement suitability.
SY88713VKI vs SY88813VKI - which is better for an optical receiver?
SY88713VKI is documented as a 3.3 V/5 V, 622 Mbps limiting postamplifier in a 10-MSOP package. The available information for SY88813VKI is limited to a cross-reference query and does not establish its package, pinout, voltage range, or speed rating. The SY88713VKI therefore remains the better-documented choice for a design until the SY88813VKI manufacturer datasheet confirms drop-in compatibility.
When should I choose SY88713VKI over a generic PECL amplifier?
Choose the SY88713VKI when the design specifically needs a documented limiting postamplifier for a 3.3 V or 5 V PECL optical path operating up to 622 Mbps. A generic PECL amplifier may provide suitable gain but can require external limiting, different biasing, or additional level-shift circuitry. The SY88713VKI combines the postamplifier and limiting functions in one 10-MSOP package.
Is SY88713VKI suitable for a 3.3 V telecom backplane?
The SY88713VKI can suit a 3.3 V telecom backplane when its 622 Mbps rating, PECL interface, and required input/output levels match the receiver design. The device supports both 3.3 V and 5 V operation according to the Microchip manufacturer datasheet. Confirm signal swing, biasing, terminations, trace impedance, and thermal performance against the complete board-level requirements.
What are the key specifications of SY88713VKI that engineers should know?
The key SY88713VKI specifications are a 3.3 V or 5 V supply, operation up to 622 Mbps, PECL signal compatibility, and a 10-MSOP package measuring 0.118 inch or 3.00 mm wide. The Microchip manufacturer datasheet also identifies it as a single-chip limiting postamplifier for optical-network applications. Use these points to establish an initial footprint and architecture before reviewing the detailed electrical limits.

داده‌های مرجع مهندسی برای SY88713VKI — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the SY88713VKI when designing a compact 3.3 V or 5 V PECL receiver path that requires postamplification and limiting at up to 622 Mbps. Its integrated limiting function can simplify a fiber-optic receiver compared with a generic amplifier followed by a separate limiter, while the narrow 10-MSOP package supports space-constrained transceiver layouts. Do not select it for channels whose data rate, input bias, output swing, or supply requirements exceed the manufacturer limits. A replacement should be considered only after its package drawing, complete pin map, electrical characteristics, and signal-integrity performance have been shown to match. Generic PECL amplifiers, the SY88813VKI, and other catalog products should remain design alternatives until their compatibility with the existing 10-MSOP land pattern and 622 Mbps interface is demonstrated.

مقایسه با جایگزین‌ها

پارامتر این محصول
Package 10-MSOP (0.118 inch, 3.00 mm wide)
Brand Microchip Technology
Product Type Limiting postamplifier IC
Supply Voltage 3.3 V or 5 V
Operating Data Rate 622 Mbps
Signal Type PECL
Architecture Single-chip amplifier solution
Primary Application Optical networks
Mounting Type Surface mount

تفاوت‌های کلیدی

  • Integrated postamplifier and limiting function (در مقابلGeneric PECL amplifier)
  • Supports two common receiver supply voltages (در مقابلSingle-voltage 5 V PECL amplifier)
  • Documented optical-network operating class (در مقابلGeneral-purpose high-speed amplifier)

یادداشت‌های طراحی

Keep the path from the photodetector or preceding gain stage to the SY88713VKI short and impedance-controlled. A 10-MSOP package provides a compact placement solution, but its lead pitch and pin assignments require the land pattern in the Microchip manufacturer package drawing. Do not substitute a generic 10-pin footprint without checking pin-1 orientation, pad geometry, and the manufacturer’s exposed-pad or thermal recommendations.

Decouple the 3.3 V or 5 V supply locally and route return current away from sensitive high-speed nodes. Place the highest-frequency bypass capacitor at the supply and ground pins with the shortest possible current loop. Verify supply sequencing, tolerance, ripple, and ground-return paths in the complete receiver because the device’s limiting function depends on clean, stable operating conditions.

Review input coupling, biasing, output termination, and downstream logic thresholds against the manufacturer datasheet before the first board revision. The stated 622 Mbps capability establishes the device class, but usable channel performance also depends on edge rate, trace loss, impedance discontinuities, and return loss. Use a time-domain or eye-diagram check at the system level rather than inferring signal integrity from the nominal data rate alone.

Do not treat an amplifier with a similar description as a drop-in replacement. A valid substitute for the SY88713VKI must match the 10-MSOP footprint and pin mapping, support the required 3.3 V or 5 V supply, and preserve suitable PECL levels and bandwidth at 622 Mbps. Also avoid confusing the non-reel MPN with tape-and-reel ordering variants; packaging codes must match the assembly process.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Compliance status must be confirmed against the current Microchip manufacturer product documentation or a declaration of compliance.

تاریخ تأیید داده‌ها: 2026-11-20 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

SY88713VKI datasheet SY88713VKI pinout SY88713VKI datasheet pdf SY88713VKI 622Mbps amplifier SY88713VKI 10-MSOP SY88713VKI optical receiver SY88713VKI equivalent SY88713VKI replacement SY88713VKI cross reference SY88713VKI price Microchip SY88713VKI SY88713VKI footprint

قطعات و اصطلاحات مرتبط

Microchip Technology SY88713VKI SY88713VKI-TR SY88813VKI limiting postamplifier special-purpose amplifier linear amplifier amplifier IC signal-conditioning IC interface IC PECL 622 Mbps 3.3 V power supply 5 V power supply 10-MSOP 10-TFSOP surface-mount package optical receiver optical network fiber-optic interface clock recovery signal limiting photodetector single-chip amplifier solution Telecom
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ