SY88913VKC - 1.25Gbps Limiting Post Amplifier | Microchip
MPN: SY88913VKC ✓ فعالSY88913VKC نمای کلی
A limiting post amplifier is a specialized amplifier IC that restores signal amplitude and shape after losses caused by cables, connectors, optical components, or other transmission stages. Within the signal-chain hierarchy, it sits between a high-speed transmitter or optical receiver and downstream logic, conversion, or clock-and-data-recovery circuitry. Its limiting behavior produces clean digital output levels while reducing sensitivity to amplitude variation at the input.
The SY88913VKC supports both 3.3V and 5V power-supply options, allowing it to operate in systems with either supply rail. Key features include low power consumption, low noise, differential PECL inputs, a TTL-compatible enable input with an internal 27kΩ pull-up, and a PECL loss-of-signal output. The enable function can hold the output in a controlled state when the upstream link is inactive, improving system power management and signal integrity.
The device is intended for 1.25Gbps optical-network links but can also process signals up to 1.5Gbps. Differential input handling reduces common-mode noise pickup in high-speed interconnects, while the limiting amplifier reconstructs a usable output from a degraded input waveform. The loss-of-signal feature provides downstream circuitry with an indication that the input has fallen below the usable detection threshold.
Typical uses include optical transceiver modules, fiber-optic network links, backplane signal conditioning, telecommunications equipment, and high-speed instrumentation. The device can also be evaluated in clock-and-data-recovery front ends when an upstream link requires amplitude restoration and link-presence monitoring.
PCB implementation should minimize trace lengths between the amplifier and high-speed connectors, preserve controlled-impedance routing for differential pairs, and provide local supply bypassing. Differential traces should remain closely coupled, have a continuous reference plane, and avoid unnecessary stubs. The enable net must be reviewed for compatibility with the system’s TTL logic and power-sequencing requirements.
This product page consolidates the principal electrical characteristics, package information, replacement constraints, application guidance, and design considerations into an engineering-focused reference for evaluating the SY88913VKC in 1.25Gbps signal-chain designs.
جایگزینهای drop-in برای SY88913VKC — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
SY88913VKC-TR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
SY88913VKC حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | High-speed limiting post amplifier |
| Nominal Data Rate | 1.25 Gbps |
| Maximum Stated Operating Speed | 1.5 Gbps |
| Supply Voltage Options | 3.3 V or 5 V |
| Power Supply Configuration | Single supply |
| Input Type | Differential PECL |
| Enable Input Type | TTL |
| Enable Input Pull-Up | 27 kΩ internal |
| Loss-of-Signal Output | PECL |
| Loss-of-Signal Detection | Chatter-free |
| Power Consumption | Low power |
| Noise Performance | Low noise |
| بستهبندی | 10-MSOP |
| نوع نصب | Surface mount |
| Standard Package Quantity | 100 units |
| وضعیت RoHS | Non-compliant; contains lead |
راهنمای پیکربندی پین SY88913VKC 100 units
پیکربندی پین برای SY88913VKC (پکیج 100 units). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای SY88913VKC.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
SY88913VKC مناسب است برای 6 کاربردs: 1.25Gbps Optical Transceiver Signal Conditioning, Fiber-Optic Network Link Conditioning, High-Speed Backplane Signal Restoration, Clock-and-Data-Recovery Front End, High-Speed Test and Measurement Equipment, Telecommunications Equipment Data Interfaces.
1.25Gbps Optical Transceiver Signal Conditioning
The SY88913VKC fits at the high-speed data interface of a 1.25Gbps optical transceiver, where cable, connector, and optical-path losses can reduce signal amplitude and distort the transition shape. Its differential PECL inputs accept the recovered data signal, and the limiting action restores consistent digital output levels for downstream clock-and-data-recovery circuitry. Operation from 3.3V or 5V supports both common transceiver architectures, while the chatter-free PECL loss-of-signal output allows the host to recognize an inactive link. The principal design consideration is to preserve controlled-impedance routing and place termination close to the device.
پیشنهادی
Fiber-Optic Network Link Conditioning
In a fiber-optic network link, the SY88913VKC can condition a 1.25Gbps data signal after photodetection or before the next transmit stage, reducing the impact of amplitude variation caused by optical power, connector, or backplane losses. The nominal 1.25Gbps rating aligns with established optical-network rates, and the manufacturer states support up to 1.5Gbps. Differential PECL signaling reduces susceptibility to common-mode pickup, while loss-of-signal detection provides a direct supervisory indication. Engineers should verify output voltage levels, termination, and timing margin against the complete optical link.
پیشنهادی
High-Speed Backplane Signal Restoration
The SY88913VKC is suitable for a backplane receiver or repeater stage that must regenerate a 1.25Gbps signal after connector and trace losses. Differential inputs preserve signal integrity in a noisy environment, and the limiting amplifier produces repeatable output levels for the following digital circuit. Its low-power and low-noise characteristics are useful in multi-channel equipment where each link consumes limited power. The TTL enable input with a 27kΩ internal pull-up can support controlled link operation, but the complete system must account for propagation delay, jitter, channel loss, and the timing budget of the receiving logic.
پیشنهادی
Clock-and-Data-Recovery Front End
The SY88913VKC can precede a clock-and-data-recovery block when the incoming 1.25Gbps waveform has experienced amplitude loss or edge degradation. The limiting function reconstructs stable logic levels before the recovery circuit evaluates transitions, while differential PECL inputs support common high-speed interface arrangements. The loss-of-signal output provides useful link-state information to the system controller, and the enable input allows the amplifier to be controlled during initialization or power sequencing. Timing analysis must include the amplifier's propagation delay and output-jitter contribution within the CDR's acquisition and tracking margins.
پیشنهادی
High-Speed Test and Measurement Equipment
The SY88913VKC can serve as a signal-conditioning element in high-speed test equipment that receives a degraded 1.25Gbps differential signal from a fixture, cable assembly, or device under test. Its limiting action can improve output-level consistency before a counter, analyzer, or trigger system evaluates the waveform. Support for 3.3V and 5V supplies allows integration with different instrument architectures, and the loss-of-signal output helps identify disconnected or invalid inputs. Instrumentation designs should provide clean references, controlled-impedance connections, and adequate isolation so the amplifier's contribution to measurement noise and timing uncertainty remains within the test budget.
پیشنهادی
Telecommunications Equipment Data Interfaces
The SY88913VKC can be used in telecommunications equipment that interfaces 1.25Gbps data between line cards, optical modules, or backplane sections. Differential PECL inputs and the loss-of-signal output make it suitable for systems requiring both signal restoration and link monitoring. The 10-MSOP package supports compact implementation, while the low-power feature benefits multiport equipment. The enable function can assist with staged startup and fault isolation, but system designers must ensure that its TTL level and internal 27kΩ pull-up integrate correctly with the surrounding control logic and that the PECL output termination matches the selected supply voltage.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای SY88913VKC — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | SY88913VKC-TR |
|---|---|---|
| Package | 10-MSOP | 10-MSOP |
| Brand | Microchip Technology | Microchip Technology |
| Product Type | High-speed limiting post amplifier | High-speed limiting post amplifier |
| Nominal Data Rate | 1.25 Gbps | 1.25 Gbps |
| Maximum Stated Operating Speed | 1.5 Gbps | 1.5 Gbps |
| Supply Voltage Options | 3.3 V or 5 V | 3.3 V or 5 V |
| Input Type | Differential PECL | Differential PECL |
| Enable Input | TTL with internal 27 kΩ pull-up | TTL with internal 27 kΩ pull-up |
| Loss-of-Signal Output | PECL with chatter-free detection | PECL with chatter-free detection |
| Order and Packing Form | SY88913VKC original order form | SY88913VKC-TR tape-and-reel order form |
تفاوتهای کلیدی
- Integrated high-speed link monitoring (در مقابلSY88913VKC-TR)
- Flexible single-rail operation (در مقابلSY88913VKC-TR)
- Differential PECL interface with local control (در مقابلSY88913VKC-TR)
یادداشتهای طراحی
Route the differential data inputs and outputs as short, continuously referenced, impedance-controlled pairs. Keep the input and output loop areas small, avoid stubs and test-pad discontinuities, and place the device close to the connector or transceiver interface. Because the SY88913VKC is intended for rates up to 1.5Gbps, trace geometry, dielectric material, connector transitions, and neighboring switching currents can materially affect edge quality and timing margin.
Follow the manufacturer application circuit for supply decoupling and PECL termination values. The device supports 3.3V and 5V operation, so termination and level-shift components must be selected for the actual rail. Place the primary bypass capacitor adjacent to the supply and ground pins, provide a low-impedance ground return, and inspect the PCB for shared-current paths that could couple output switching noise into the sensitive input stage.
Validate the complete channel rather than only the amplifier output. Measure differential input amplitude, rise and fall time, jitter, propagation delay, and loss-of-signal behavior at the intended data rate. The limiting amplifier can restore amplitude but cannot correct excessive deterministic jitter, bandwidth loss, reflections, or timing errors already present in the channel. Use controlled test fixtures and confirm that the loss-of-signal threshold fits the optical or copper-link operating margin.
Do not assume that any 1.25Gbps amplifier is interchangeable with the SY88913VKC. A valid replacement must also match the 10-MSOP pin assignments, differential PECL input arrangement, TTL enable input, PECL loss-of-signal output, and 3.3V or 5V supply configuration. Also distinguish SY88913VKC from SY88913VKC-TR by order and packing requirements. Review enable polarity, pull-up behavior, and power-up sequencing in the system-level schematic.
اطلاعات انطباق
The available product-document listing states that SY88913VKC contains lead and is RoHS non-compliant. REACH, halogen-free, conflict-minerals, and automotive-qualification status are not stated and therefore remain unknown or not applicable.