Microchip Technology

SY88933VKG - 1.25Gbps Limiting Post Amplifier | Microchip

MPN: SY88933VKG ✓ فعال
3.3 V to 5.0 V Vdss 10-MSOP, 3.00 mm width Package
حداقل سفارش: 1 |

SY88933VKG نمای کلی

Microchip SY88933VKG is a low-power limiting postamplifier for fiber-optic receiver systems, operating from a single 3.3 V or 5 V supply and supporting data rates up to 1.25 Gbps in a 10-MSOP package. The device accepts a linear signal from a transimpedance amplifier, amplifies and limits the waveform, and provides low-noise PECL outputs together with a TTL signal-detect output.

A limiting postamplifier is a signal-conditioning IC positioned after the transimpedance amplifier in an optical receiver. Its role in the optical communications chain—optical detector, transimpedance amplifier, limiting postamplifier, and clock/data recovery—is to restore a clean digital waveform from an analog signal whose amplitude and noise may vary with optical input power, temperature, and component tolerances.

The SY88933VKG supports operation from a single 3.3 V or 5 V supply across an operating temperature range of -40°C to +85°C. According to the manufacturer datasheet, its wide bandwidth and high gain can amplify signals with data rates up to 1.25 Gbps and amplitudes as small as 5 mV peak-to-peak into signals suitable for PECL inputs. The device also generates a TTL signal-detect output.

A programmable signal-detect level is controlled through the SD LVL pin, allowing the receiver system to adjust loss-of-signal sensitivity. This is especially useful in optical-network equipment where the signal-present threshold must account for optical budget, receiver gain, system noise, and temperature drift. The PECL outputs support downstream digital circuitry while the TTL output provides a separate system-level detection function.

Typical uses include 1.25 Gbps fiber-optic receivers, optical network equipment, PON-related receiver paths, and other high-speed photonic communication systems. The SY88933VKG is appropriate when a TIA produces a usable analog waveform but the following digital stage requires deterministic logic-level signaling and a stable signal-presence indication.

When laying out the receiver, place the device close to the TIA output and keep PECL and TTL traces short, with reference-plane-return paths continuous. Confirm output-interface compatibility, termination values, and signal-detect polarity in the system schematic. Treat SD LVL as an analog control node and protect it from noisy or high-impedance probe connections that could shift the detection threshold.

This product page combines the manufacturer’s operating information with packaging details, pinout guidance, drop-in alternatives, and practical receiver-layout considerations. It helps engineers evaluate the SY88933VKG for a 10-MSOP, single-supply, 1.25 Gbps optical-receiver design without confusing a limiting postamplifier with the preceding transimpedance stage.

جایگزین‌های drop-in برای SY88933VKG — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

SY88933ALKI-TR

✅ جایگزین مستقیم
📦 10-MSOP
Maximum supply voltage is 3.6 V versus 5.5 V, approximately 35% lower, while retaining the 10-MSOP package and 1.25 Gbps limiting-amplifier function

📋 جایگزین مرجع (خارج از کاتالوگ)

SY88933ALKITR

✅ جایگزین مستقیم
📦 10-MSOP
Maximum supply voltage is 3.6 V versus 5.5 V, approximately 35% lower, with the same 10-MSOP limiting-postamplifier format and 1.25 Gbps data-rate capability

📋 جایگزین مرجع (خارج از کاتالوگ)

SY88933VKG حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Limiting postamplifier
Maximum Data Rate 1.25 Gbps
Supply Voltage Range 3.3 V to 5.0 V
Minimum Input Signal Amplitude 5 mV peak-to-peak
محدوده دمای کاری -40°C to +85°C
Logic Output Low-noise PECL data outputs
Signal Detect Output TTL SD output
Signal Detect Control Programmable SD LVL pin
Supply Configuration Single supply
بسته‌بندی 10-MSOP, 3.00 mm width
نوع نصب Surface mount
Packaging Cut tape
Application Fiber-optic receivers and optical networks
Lead-Free Status Lead free

راهنمای پیکربندی پین SY88933VKG 10-msop, 3.00 mm width

پیکربندی پین برای SY88933VKG (پکیج 10-msop, 3.00 mm width). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 10-msop, 3.00 mm width برای SY88933VKG

داده پین‌آوت تفصیلی موجود نیست برای SY88933VKG.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

SY88933VKG مناسب است برای 6 کاربردs: 1.25 Gbps Fiber-Optic Receiver, Optical Network Receiver Interface, PON Optical Receiver Path, Photonic Communication Link, High-Speed Digital Signal Conditioning, Receiver Module Signal Conditioning.

🌐

1.25 Gbps Fiber-Optic Receiver

The SY88933VKG fits immediately after the transimpedance amplifier in a 1.25 Gbps optical receiver because the manufacturer specifies operation to 1.25 Gbps and amplification from signals as small as 5 mV peak-to-peak. The postamplifier limits the recovered analog waveform and presents low-noise PECL outputs to downstream clock-and-data-recovery circuitry. Its single 3.3 V or 5 V supply also permits the receiver to align with the optical-module power architecture. The principal design consideration is maintaining a continuous return path for the high-speed PECL interfaces and verifying operation across the complete temperature and optical-power range.

🌐

Optical Network Receiver Interface

The SY88933VKG is suitable for optical-network equipment that requires a compact signal-conditioning stage between a TIA and digital logic. Its low-noise PECL outputs help preserve signal integrity at data rates up to 1.25 Gbps, while the TTL signal-detect output provides a separate system-status indication. The programmable SD LVL control allows the threshold to be adjusted for the receiver’s optical budget and noise environment. During design-in, characterize signal-detect timing across temperature and end-of-life optical power so that the receiver does not report false loss of signal during normal operating transitions.

🧩

PON Optical Receiver Path

The SY88933VKG can be used in passive-optical-network receiver paths where the TIA output varies with optical input power and the downstream circuitry needs consistent digital-level signals. Supporting data rates up to 1.25 Gbps gives it sufficient bandwidth for common PON-class receiver links, while its 10-MSOP package preserves board area in compact line cards. The TTL SD output can feed a controller or alarm block, and the SD LVL pin allows the threshold to be tuned after optical-budget analysis. Validate complementary-output topology, reference voltages, and loss-of-signal polarity against the system architecture.

🌐

Photonic Communication Link

The SY88933VKG is appropriate for a general photonic communication link when a receiver front end uses a TIA followed by a separate limiting stage. Its high gain and wide bandwidth allow signals at data rates up to 1.25 Gbps and amplitudes down to 5 mV peak-to-peak to be converted into usable PECL outputs. This separation of analog amplification and digital limiting can simplify the TIA design. The implementation should keep the TIA-to-postamplifier path short, use appropriate high-speed terminations, and avoid adding unnecessary circuitry that can increase jitter or degrade the receiver noise margin.

⚡

High-Speed Digital Signal Conditioning

The SY88933VKG can serve as a dedicated signal-conditioning block in equipment that needs a TTL presence indication alongside differential-style high-speed logic outputs. Its programmable signal-detect threshold is useful for distinguishing valid receiver activity from noise or an absent optical signal, while the TTL output can interface more simply with supervisory logic. Because the device is a limiting postamplifier rather than a general-purpose op amp, the signal source should already be a TIA waveform. Design checks should include threshold settling, propagation delay, output levels, and system behavior during loss of optical input.

🏭

Receiver Module Signal Conditioning

The SY88933VKG is useful in compact optical receiver modules where a 10-MSOP postamplifier can follow a high-performance TIA without consuming excessive board area. Operating from a single 3.3 V or 5 V supply simplifies rail planning, and the -40°C to +85°C operating range supports industrial-temperature receiver designs. The device’s low-noise PECL outputs are intended for downstream digital circuitry, while TTL SD provides a simpler supervisory connection. For module assembly, pay particular attention to thermal exposure, clean return paths, the SD LVL control net, and consistent production testing of the signal-detect threshold.

What is the SY88933VKG used for?
The SY88933VKG is a low-power limiting postamplifier used after a transimpedance amplifier in a fiber-optic receiver. According to the Microchip SY88933V datasheet, it conditions data rates up to 1.25 Gbps and provides low-noise PECL data outputs plus a TTL signal-detect output. It is intended for optical-network receiver paths where a variable analog TIA waveform must be converted into a stable digital signal.
What is the operating voltage of SY88933VKG?
The SY88933VKG operates from a single 3.3 V or 5.0 V supply. The manufacturer datasheet specifies operation from 3.3 V to 5 V over a temperature range of -40°C to +85°C. This supply range allows the receiver design to use common 3.3 V logic environments or 5 V optical-module power while retaining the same 10-MSOP postamplifier.
What data rate does SY88933VKG support?
The SY88933VKG supports data rates up to 1.25 Gbps. According to the Microchip datasheet, its wide bandwidth and high gain can amplify signals as small as 5 mV peak-to-peak and produce signals able to drive PECL inputs. This makes the device applicable to 1.25 Gbps optical receivers and similar high-speed photonic communication links.
Where can I download the SY88933VKG datasheet PDF?
The SY88933VKG datasheet PDF is available through the Microchip SY88933V product page and the manufacturer document linked for this part. The document describes the 10-MSOP device, single-supply operation, PECL and TTL outputs, signal-detect behavior, and electrical characteristics. Use the manufacturer PDF when assigning pins, selecting terminations, and checking operating limits for a new receiver design.
Where is the SY88933VKG pinout?
The SY88933VKG pinout is shown in the connection and pin-description diagrams in the Microchip SY88933V datasheet. The device uses a 10-MSOP package with a 3.00 mm body width. Use the diagram that matches the exact ordering code and package variant, and verify the exposed or no-connect positions directly against the manufacturer pin table before making PCB assignments.
How does the SY88933VKG signal-detect output work?
The SY88933VKG provides a TTL signal-detect output and a programmable SD LVL control input. According to the manufacturer datasheet, the SD LVL pin sets the signal-detection sensitivity level. Designers can use this threshold to determine when the receiver should indicate that a usable signal is present, making it important to validate the level across expected optical power and temperature conditions.
Where can I buy SY88933VKG online?
Use the Request a Quote form on this page to ask for SY88933VKG availability, current commercial terms, and shipment scheduling. The form is the appropriate route for sourcing decisions without inserting transient commercial terms into technical documentation. When requesting a quote, include the required quantity, target delivery date, and whether the cut-tape package format is acceptable.
What is the lead time for SY88933VKG?
Submit an SY88933VKG request through the Request a Quote form on this page to obtain the current lead time and minimum-order quantity. Lead time can change with manufacturer inventory, order volume, and packaging requirements, so engineers should request confirmation against the project schedule before committing the receiver layout and bill of materials.
Is SY88933VKG in stock?
Request current SY88933VKG stock confirmation through the Request a Quote form on this page. Include the required quantity, shipment destination, and expected production date so the commercial response reflects the actual build plan. The device is offered for optical-network receiver applications in a 10-MSOP cut-tape package, but stock should always be confirmed for the exact ordering code.
What is the price of SY88933VKG?
Use the Request a Quote form on this page for current SY88933VKG pricing and quantity terms. The quote request should specify the required order quantity, delivery schedule, and packaging preference. Pricing for this catalog part can vary with volume and commercial conditions, so a project-specific quote is more reliable than carrying a temporary catalog figure into a design review.
What can replace SY88933VKG?
The SY88933ALKI-TR is the closest documented same-family drop-in candidate because it uses the same 10-MSOP package and remains a 1.25 Gbps limiting postamplifier. Its documented maximum supply voltage is 3.6 V rather than the SY88933VKG’s 5.5 V, so it is appropriate only for a 3.3 V design that satisfies every pin, threshold, and output requirement.
Can SY88933ALKI-TR replace SY88933VKG?
The SY88933ALKI-TR can replace the SY88933VKG in a suitable 3.3 V implementation because both are 10-MSOP limiting postamplifiers and the cross-reference data identifies consistent terminals and packages. The important restriction is supply voltage: the candidate has a 3.6 V maximum supply, versus 5.5 V for the SY88933VKG. Verify the complete pinout and signal-detect behavior before approving the substitution.
SY88933VKG vs SY88933ALKI-TR: which is better for a 5V receiver?
The SY88933VKG is the better choice for a receiver powered from 5 V because its documented maximum supply voltage is 5.5 V, while the SY88933ALKI-TR is listed with a 3.6 V maximum. Both support a 1.25 Gbps limiting-amplifier function in the same 10-MSOP format, but supply-voltage headroom makes the original device the safer selection for any 5 V design.
When should I choose SY88933VKG over SY88933ALKI-TR?
Choose the SY88933VKG when the receiver uses a 5 V supply or when the design requires operation above the candidate’s 3.6 V maximum supply. The original part also supports single-supply operation from 3.3 V to 5 V. For a tightly controlled 3.3 V design, SY88933ALKI-TR may be considered after confirming all pins, thresholds, outputs, and the system loss-of-signal behavior.
What are the key specifications of SY88933VKG that engineers should know?
The key SY88933VKG specifications are a 3.3 V to 5 V single supply, operation up to 1.25 Gbps, input sensitivity down to 5 mV peak-to-peak, and an operating range of -40°C to +85°C. According to the Microchip datasheet, the 10-MSOP device provides low-noise PECL outputs, a TTL signal-detect output, and an adjustable signal-detect threshold through SD LVL.
Is there a Microchip equivalent for SY88933VKG?
Microchip offers the SY88933ALKI-TR as a documented same-family alternative in the 10-MSOP package. It retains the 1.25 Gbps limiting-postamplifier function and is listed as pin-compatible, but its 3.6 V maximum supply restricts it to 3.3 V designs. No verified cross-brand drop-in equivalent is identified for this exact function and package, so an alternative should not be approved without manufacturer-level pinout confirmation.

داده‌های مرجع مهندسی برای SY88933VKG — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the SY88933VKG for a fiber-optic receiver that requires data rates up to 1.25 Gbps, low-noise PECL outputs, a TTL signal-detect output, and operation from either 3.3 V or 5 V. Its 5.5 V maximum supply is the decisive advantage over SY88933ALKI-TR and SY88933ALKITR for any 5 V design. Consider SY88933ALKI-TR only when the receiver is restricted to a 3.3 V rail and the complete pinout, output topology, signal-detect threshold, and timing behavior have been checked. Both alternatives use the same 10-MSOP format, but package compatibility alone does not override the supply-voltage limitation. For a new optical module, use the original SY88933VKG unless there is a specific supply or sourcing reason to evaluate a lower-voltage family member.

مقایسه با جایگزین‌ها

پارامتر این محصول SY88933ALKI-TR SY88933ALKITR
Package 10-MSOP 10-MSOP - same 10-MSOP - same
Brand Microchip Technology Microchip Technology Microchip Technology
Product Type Limiting postamplifier Limiting postamplifier Limiting postamplifier
Maximum Data Rate 1.25 Gbps 1.25 Gbps 1.25 Gbps
Minimum Supply Voltage 3 V 3 V 3 V
Maximum Supply Voltage 5.5 V 3.6 V 3.6 V

تفاوت‌های کلیدی

  • Supports a wider single-supply operating range (در مقابلSY88933ALKI-TR)
  • Retains the same 10-MSOP integration (در مقابلSY88933ALKITR)
  • Supports high-rate optical receiver conditioning (در مقابلSY88933ALKI-TR)

یادداشت‌های طراحی

Place the SY88933VKG close to the driving TIA and keep the high-speed signal path short. Preserve a continuous ground reference beneath the PECL traces, avoid unnecessary stubs, and use the routing and termination recommendations in the manufacturer datasheet when defining the receiver board stack-up. Keep the SD LVL control trace away from high-current and high-speed nodes to prevent detection-threshold modulation.

The TIA output must be checked for amplitude, rise time, ringing, and common-mode compatibility before it reaches the postamplifier. The manufacturer specifies operation down to 5 mV peak-to-peak and up to 1.25 Gbps, so marginal eye openings or excessive source impedance can cause decision errors even when the supply voltage is correct. Validate the complete TIA-to-SY88933VKG path with the intended output loading and loss-of-signal condition.

Do not treat the SY88933VKG as a substitute for the receiver TIA. The device limits and amplifies an already recovered analog waveform; it does not perform current-to-voltage conversion. Also do not reuse the 5 V SY88933VKG in a design that depends on the 3.6 V maximum of SY88933ALKI-TR or SY88933ALKITR. Confirm pin functions, output topology, and signal-detect polarity against the exact manufacturer datasheet.

Decouple the single supply close to the device and follow the manufacturer’s recommended input and output capacitance values. Verify startup and shutdown behavior over the full system-supply ramp because the receiver may contain an upstream TIA and downstream logic with different sequencing requirements. The SD LVL pin is an analog threshold-control node, so it should not be left floating or driven by unsuitable digital circuitry.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Yes
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The product listing identifies the device as lead free. RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification details are not confirmed in the available manufacturer information.

تاریخ تأیید داده‌ها: 2026-11-20 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

SY88933VKG datasheet SY88933VKG datasheet pdf SY88933VKG pinout SY88933VKG specifications SY88933VKG equivalent SY88933VKG replacement SY88933VKG drop-in replacement SY88933VKG vs SY88933ALKI-TR SY88933VKG 10-MSOP SY88933VKG price Microchip SY88933VKG SY88933VKG optical receiver

قطعات و اصطلاحات مرتبط

Microchip Technology SY88933VKG SY88933V SY88933ALKI-TR SY88933ALKITR limiting postamplifier special-purpose amplifier signal-conditioning IC fiber-optic receiver optical network transimpedance amplifier TIA PECL TTL signal detect SD LVL 1.25 Gbps 3.3 V 5 V 5 mV peak-to-peak 10-MSOP surface mount SMD low-noise output loss of signal
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ