Texas Instruments

TAS5121DKD - 100W Mono Class D Audio Power Stage | TI

MPN: TAS5121DKD ✓ فعال
10.8 V to 13.2 V Vdss 36-terminal HSSOP Package
حداقل سفارش: 1 |

TAS5121DKD نمای کلی

The Texas Instruments TAS5121DKD is a mono Class D digital audio power stage rated for operation from a 10.8 V to 13.2 V supply and capable of delivering up to 100 W output power. The device is packaged in a 36-terminal HSSOP with gull-wing leads and is intended for commercial-temperature audio systems. According to the manufacturer datasheet, it is a digital-amplifier power stage designed to operate with a compatible TI PWM audio processor.

A Class D audio power stage is a switching amplifier that converts a PWM command signal into a filtered, high-current audio output. Compared with a linear output stage, the Class D architecture reduces power loss and supports high output power with a compact package. In a complete audio system, the TAS5121DKD handles the power-amplification stage while upstream circuitry performs signal processing, channel routing, volume control, and PWM generation.

The principal device attributes include mono Class D operation, 100 W output capability, a 10.8 V to 13.2 V supply range, and a 36-terminal HSSOP package. The commercial temperature grade makes the device suitable for audio products intended for standard commercial operating environments. Its digital power-stage role also allows it to work within TI's PurePath Digital audio architecture rather than accepting a conventional analog voltage directly at its output-driver input.

The TAS5121 family is described as a high-performance digital-amplifier power stage intended to drive a four-speaker system up to 100 W. Individual channels may be configured and combined at the system level according to the design requirements, while the PWM interface preserves a digital signal path from the audio processor to the power stage. Thermal design, output filtering, power-supply capacity, and correct interface timing remain central implementation concerns.

Typical uses include powered speakers, multimedia speaker systems, active subwoofer or full-range output stages, and compact home-audio products requiring a mono Class D power channel. The 100 W rating makes the device appropriate for systems whose speaker impedance, supply voltage, thermal design, and output-filter network support that operating level. Lower power designs can also use the device when the amplifier is not driven continuously at its maximum output capability.

Design the supply and output network with conservative current and thermal margins. The 36-lead HSSOP requires careful PCB layout for high-current connections and stable ground return paths, while the exposed thermal path and copper area must support the intended dissipation. Use the manufacturer pin-description table and reference layout when assigning nets, and confirm that the external PWM processor supplies signals with the required timing and amplitude.

This product page combines manufacturer and distributor identification with practical implementation guidance, package details, sourcing information, and a conservative replacement assessment. The comparison data distinguishes verified drop-in options from products that merely share a related family or package, helping engineers avoid choosing a mechanically similar amplifier without confirming pin and interface compatibility.

جایگزین‌های drop-in برای TAS5121DKD — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

TAS5121IDKD

✅ جایگزین مستقیم
📦 36-terminal SSOP
Industrial-temperature grade versus the target's commercial-temperature grade; principal performance characteristics, terminals, and package are reported as consistent, with a 0 percentage difference in the compared core parameters.

📋 جایگزین مرجع (خارج از کاتالوگ)

TAS5121DKD حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Mono Class D digital audio power stage
Maximum Output Power 100 W
Supply Voltage Range 10.8 V to 13.2 V
Channel Configuration 1 channel (mono)
بسته‌بندی 36-terminal HSSOP
Terminal Count 36 terminals
Lead Form Gull wing
Package Shape Rectangular
Package Code HSSOP
Temperature Grade Commercial
Control Interface Digital PWM audio interface
Technology PurePath Digital
پیکربندی خروجی Class D switching output
نوع نصب Surface-mount HSSOP

راهنمای پیکربندی پین TAS5121DKD hssop

پیکربندی پین برای TAS5121DKD (پکیج hssop). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج hssop برای TAS5121DKD

داده پین‌آوت تفصیلی موجود نیست برای TAS5121DKD.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

TAS5121DKD مناسب است برای 6 کاربردs: Powered Speaker Output Stage, Active Subwoofer Amplifier, Multimedia Speaker System, Home Audio Amplifier, Digital Audio Speaker, Professional Audio Monitor.

🔊

Powered Speaker Output Stage

The TAS5121DKD fits a powered-speaker design requiring a mono Class D channel with up to 100 W output capability. It receives digital PWM commands through a compatible TI processor and delivers the high-current audio signal through its Class D output stage. Using a 10.8 V to 13.2 V supply keeps the device within its specified operating range, while the 36-terminal HSSOP supports compact surface-mounted construction. Designers must select the correct speaker impedance, output filter, supply capacity, and thermal copper area before claiming the full 100 W rating.

🔊

Active Subwoofer Amplifier

The TAS5121DKD is appropriate for an active subwoofer power stage when the design requires a dedicated high-power mono Class D channel. Its up-to-100 W capability can suit compact subwoofer enclosures operating from a 10.8 V to 13.2 V supply. The digital PWM interface allows audio processing to remain upstream of the power amplifier, supporting system-level volume, crossover, and channel-control functions. Verify speaker impedance, low-frequency output-filter requirements, peak-current capability, and enclosure thermal performance before finalizing the amplifier design.

🖥️

Multimedia Speaker System

A multimedia speaker system can use the TAS5121DKD as a high-power mono amplification stage for a woofer, full-range driver, or grouped speaker network. The Class D architecture reduces the size and heat burden associated with a high-power linear stage, while the 100 W output rating supports substantial acoustic output. Because the device expects a digital PWM drive rather than a conventional analog input, the design must include a compatible TI audio processor or another carefully validated PWM source. Output filtering and protection must match the selected speaker impedance.

🎧

Home Audio Amplifier

The TAS5121DKD can serve as a compact mono power stage in a home-audio system that separates digital processing from loudspeaker drive. Its PurePath Digital architecture allows a compatible processor to control volume and routing while the TAS5121DKD supplies up to 100 W of Class D output power. The 10.8 V to 13.2 V supply range is suitable for regulated internal rails in many audio products. Engineers should account for idle consumption, output-filter losses, thermal rise, and protection behavior when sizing the power supply and enclosure.

📱

Digital Audio Speaker

The TAS5121DKD is suited to a digital speaker architecture in which channel data, volume commands, and audio routing are handled by a PWM-capable audio processor. Keeping those functions upstream permits a clean digital signal path until the high-current power stage. The device's mono configuration allows one channel to be assigned to a dedicated driver or network, while multiple compatible stages can support additional channels. The design must follow the manufacturer interface timing, pin configuration, output-network, and recommended-layout requirements.

🎚️

Professional Audio Monitor

The TAS5121DKD can be evaluated for a powered audio monitor requiring up to 100 W from a single Class D output stage. Its digital interface fits systems in which a central processor performs crossover, limiting, metering, or routing before the power conversion stage. The 36-terminal HSSOP package can support a compact design, although its exposed heat path requires adequate copper and careful layout. Confirm continuous and music-program power separately, and validate the output filters and protection strategy for the intended monitor impedance.

What is the TAS5121DKD?
The TAS5121DKD is a Texas Instruments mono Class D digital audio power stage rated for up to 100 W output from a 10.8 V to 13.2 V supply. According to the manufacturer datasheet, it uses PurePath Digital technology and is intended to operate with a compatible TI audio PWM processor. It is supplied in a 36-terminal HSSOP package for surface-mounted audio equipment.
What are the key specifications of TAS5121DKD that engineers should know?
The TAS5121DKD is a 100 W, mono Class D digital power stage with a 10.8 V to 13.2 V operating supply and a 36-terminal HSSOP package. The manufacturer identifies it as a commercial-temperature component with a digital PWM interface and PurePath Digital architecture. Its main design considerations are output-power capability, supply current, thermal dissipation, high-current layout, and compatibility with the associated TI PWM processor.
What is the supply voltage range of TAS5121DKD?
The TAS5121DKD operates from 10.8 V to 13.2 V according to the product specification shown by Texas Instruments and its authorized distributors. The supply rails and decoupling network must remain within this operating range under startup, idle, and full-load conditions. Confirm power-supply capacity and transient response separately because the operating-voltage range does not by itself specify maximum supply ripple or output power at every load condition.
How much audio output power can TAS5121DKD deliver?
The TAS5121DKD is rated for up to 100 W of Class D audio output power. The manufacturer describes the TAS5121 as a digital-amplifier power stage designed for a four-speaker system up to 100 W. Achievable continuous power depends on supply voltage, speaker impedance, output-filter design, PCB thermal performance, and signal duty cycle, so those conditions must be checked before treating 100 W as an unconditional system rating.
Where can I download the TAS5121DKD datasheet PDF?
The official Texas Instruments datasheet is available from the manufacturer's TAS5121 documentation page at https://www.ti.com/lit/ds/symlink/tas5121.pdf. Use the pin-description table, electrical characteristics, application circuit, and recommended PCB layout from that document when designing the device. The DKD order code identifies the commercial-temperature, 36-terminal HSSOP configuration.
Where can I find the TAS5121DKD pinout?
The TAS5121DKD pin assignments are shown in the pin-description table of the Texas Instruments TAS5121 datasheet. Use that table together with the recommended package outline and land pattern when assigning power, ground, PWM signal, control, and output nets. The component has 36 terminals in an HSSOP package, so the footprint and exposed thermal pad must be matched to the manufacturer drawing.
Is TAS5121DKD suitable for a powered speaker?
Yes, the TAS5121DKD is suitable for a powered-speaker output stage requiring a mono Class D channel with up to 100 W capability. Its 10.8 V to 13.2 V operating supply and PurePath Digital interface suit a system using a compatible TI PWM processor. The final speaker design must still verify load impedance, output filtering, continuous versus peak power, enclosure thermal limits, and amplifier protection requirements.
Can TAS5121DKD be used with a TI audio PWM processor?
Yes, the TAS5121DKD is designed to operate with a compatible TI audio PWM processor through its digital audio interface. According to the manufacturer documentation, the device belongs to the PurePath Digital family. The upstream processor must provide the correct channel format and signal timing, while the power stage must be connected according to the manufacturer application schematic and output-filter recommendations.
What is the difference between TAS5121DKD and TAS5121IDKD?
The principal difference identified by the manufacturer comparison is temperature grade: TAS5121DKD is a commercial-temperature part, while TAS5121IDKD is rated for industrial temperatures. A cross-reference listing describes TAS5121IDKD as having consistent terminals, package construction, and principal performance characteristics. Use TAS5121IDKD when the wider industrial temperature requirement is necessary and confirm all electrical details against its own datasheet.
What can replace the TAS5121DKD?
TAS5121IDKD is the identified drop-in replacement for TAS5121DKD because it retains a consistent 36-pin SSOP package, terminal arrangement, and principal performance characteristics. Its differentiating feature is industrial-temperature operation rather than the target's commercial temperature grade. No other qualified drop-in replacement is established by the available cross-reference information, so an engineer should avoid treating a similarly packaged amplifier as interchangeable without validating every pin and interface function.
What is the best Texas Instruments equivalent for TAS5121DKD?
TAS5121IDKD is the best Texas Instruments drop-in equivalent identified for TAS5121DKD because the parts share the package and terminal arrangement and retain consistent principal performance characteristics. The TAS5121IDKD changes the temperature grade to industrial, providing a useful option for harsher operating environments. Confirm the power rating, supply limits, control logic, and application circuit in the device-specific datasheet before production use.
When should I choose TAS5121DKD over TAS5121IDKD?
Choose TAS5121DKD when the product operates within commercial-temperature requirements and the extra temperature capability of TAS5121IDKD is unnecessary. Choose TAS5121IDKD when industrial-temperature operation is required because it is explicitly identified as the industrial-temperature version with the same terminal and package construction. For either part, verify the actual enclosure temperature, speaker load, supply design, and expected output duty cycle.
Is TAS5121DKD suitable for industrial audio equipment?
The TAS5121DKD is identified as a commercial-temperature-grade device, so it should not be selected solely on the assumption that it covers industrial environments. TAS5121IDKD is the identified industrial-temperature drop-in alternative with matching package and terminal characteristics. For industrial equipment, verify the complete required temperature interval against the replacement's datasheet and account for power-supply tolerance, enclosure heating, and startup conditions.
What is the best cross-brand equivalent for TAS5121DKD?
No verified cross-brand drop-in equivalent is established for the TAS5121DKD. Its Class D power-stage function depends on a specific digital PWM interface, so matching the 36-terminal package alone is insufficient to prove replacement compatibility. A potential cross-brand candidate would require verification of pin functions, control timing, PWM format, electrical limits, output stage behavior, package thermal pad, and application circuitry before it could be treated as a drop-in part.
Where can I buy TAS5121DKD online?
Use the Request a Quote form on this page to request TAS5121DKD availability, lead time, and ordering information from XAIPART. The component is listed by Texas Instruments as a 100 W mono Class D power stage in a 36-terminal HSSOP package. Before placing an order, confirm the exact DKD suffix, required commercial temperature grade, quantity, packaging format, and delivery schedule with the supplier.
What is the price of TAS5121DKD?
Current TAS5121DKD pricing is obtained through the Request a Quote form on this page rather than through a static price table. Submit the exact MPN, required quantity, and shipment destination so the quote can reflect the current component, package suffix, and commercial terms. For comparison purposes, the request should clearly identify TAS5121DKD rather than the broader TAS5121 family or the industrial-temperature TAS5121IDKD.
What is the lead time for TAS5121DKD?
The current TAS5121DKD lead time should be requested through the Request a Quote form on this page. Lead time can change with manufacturer inventory, component demand, order quantity, and approved sourcing channels, so a general family-level statement would not represent the orderable DKD configuration. Provide the forecast quantity and target delivery date with the request to obtain a schedule tied to the exact MPN.
Is TAS5121DKD in stock?
Request current TAS5121DKD stock status through the Request a Quote form on this page. Stock should be confirmed for the exact 36-terminal HSSOP configuration and commercial temperature grade rather than inferred from listings for other TAS5121 order codes. For production planning, ask for a quantity-based availability update and lead-time estimate for the complete purchase order.

داده‌های مرجع مهندسی برای TAS5121DKD — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose TAS5121DKD for a commercial-temperature audio product requiring a mono Class D power stage with up to 100 W capability from a 10.8 V to 13.2 V supply. It is appropriate when the design already uses a compatible TI PWM processor and the manufacturer reference circuit. Choose TAS5121IDKD instead when the finished product must meet industrial-temperature requirements; the available comparison identifies matching terminals, package construction, and principal performance characteristics, making it the qualified drop-in option. Neither part should be selected solely because another amplifier uses 36 leads. Confirm PWM timing, control polarity, output-filter values, speaker impedance, thermal-pad construction, and supply-current requirements before release. If a cross-brand device is proposed, treat it as a new design until its complete interface and electrical behavior have been validated against the TAS5121DKD datasheet.

مقایسه با جایگزین‌ها

پارامتر این محصول TAS5121IDKD
Brand Texas Instruments Texas Instruments
Package 36-terminal HSSOP 36-pin SSOP
Product Type Mono Class D digital audio power stage Digital-amplifier power stage
Output Power Up to 100 W Up to 100 W
Temperature Grade Commercial Industrial
Control Interface Digital PWM audio interface Digital PWM audio interface
Technology PurePath Digital PurePath Digital
Output Configuration Mono Class D Mono Class D

تفاوت‌های کلیدی

  • Commercial-temperature configuration with 100 W Class D output (در مقابلTAS5121IDKD)
  • Verified terminal and package consistency for replacement (در مقابلTAS5121IDKD)
  • PurePath Digital power-stage architecture (در مقابلTAS5121IDKD)

یادداشت‌های طراحی

Route power, ground, and speaker-output currents using the shortest paths and widest practical copper areas allowed by the manufacturer layout. Place input, decoupling, and output-filter components near their associated terminals, and keep switching-node copper away from sensitive audio and control routes. The HSSOP footprint and exposed thermal pad must follow the Texas Instruments land pattern rather than a generic 36-pin SOIC footprint.

Estimated: power dissipation equals output power plus conversion and bias losses, divided by amplifier efficiency. For example, 50 W output at 85 percent efficiency implies approximately 8.8 W total dissipated power. Confirm that the PCB copper area and surrounding enclosure can remove that heat while keeping the device within its manufacturer thermal limits; do not infer safe operation from the 100 W output rating alone.

Use the manufacturer reference circuit for supply decoupling, PWM connections, control functions, and output filtering. The 10.8 V to 13.2 V operating range defines valid nominal rail conditions, not the transient, ripple, or current capability of the supply. Select a supply that supports peak load current without collapsing the rails, and verify startup behavior because a sudden power-stage load can create additional inrush and supply-droop stress.

Do not treat a 36-terminal package as proof of electrical compatibility. Verify every pin function, PWM timing requirement, control polarity, thermal-pad connection, and output-network component against the device-specific datasheet. The TAS5121IDKD is identified as a drop-in alternative because its terminals and principal characteristics are consistent, but its industrial temperature grade should still be reflected in the final product qualification.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The commercial temperature grade and package information are confirmed, but no explicit environmental or material-compliance declarations are included in the available product information. AEC-Q100 is recorded as unknown rather than not_qualified because the device is a commercial audio power stage and no qualification statement is shown.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

TAS5121DKD datasheet TAS5121DKD pinout TAS5121DKD datasheet pdf TAS5121DKD 100W amplifier TAS5121DKD 36 HSSOP TAS5121DKD equivalent TAS5121DKD replacement TAS5121DKD cross reference TAS5121DKD vs TAS5121IDKD Texas Instruments TAS5121DKD TAS5121DKD application circuit TAS5121DKD price TAS5121DKD stock TAS5121DKD powered speaker

قطعات و اصطلاحات مرتبط

Texas Instruments TAS5121DKD TAS5121IDKD TAS5121 Class D amplifier digital audio power stage mono amplifier PurePath Digital PWM interface audio amplifier IC integrated circuit semiconductor 36-terminal HSSOP SSOP package surface-mount package 10.8 V to 13.2 V power supply 100 W audio output digital PWM audio powered speaker active subwoofer home audio amplifier professional audio monitor RoHS REACH AEC-Q100
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ