TPS2062CDGNR - Dual 1A USB Power Switch | Texas Instruments
MPN: TPS2062CDGNR ✓ فعالTPS2062CDGNR نمای کلی
A power-distribution switch is a type of load switch that provides controlled power delivery to downstream circuits, offering protection against overcurrent, short-circuit, and over-temperature conditions. It sits between the power source and the load, acting as a smart switch that can be enabled or disabled via a control signal. In the system hierarchy, a power-distribution switch is a subset of power management ICs, which also include voltage regulators, DC-DC converters, and battery management devices. The TPS2062C family is specifically optimized for USB ports, where it ensures safe power delivery and protects the host controller from fault conditions.
Key features of the TPS2062CDGNR include a fast overcurrent response time of 2 µs (typical), which quickly limits fault current to protect upstream components. The device also provides reverse current blocking, output discharge function, soft-start to reduce inrush current, and under-voltage lockout (UVLO) to ensure proper operation during power-up. Built-in over-temperature protection and short-circuit protection further enhance system reliability. The active-low enable inputs allow for simple logic control, and the 70-mΩ on-resistance minimizes power loss and voltage drop across the switch.
Technically, the TPS2062CDGNR uses a constant-current limiting scheme that maintains a safe output current during overload conditions, preventing damage to the switch and the load. The output discharge function actively pulls the output to ground when the switch is disabled, ensuring no residual voltage remains on the load. The soft-start feature limits inrush current when driving capacitive loads, which is critical for USB applications where downstream capacitors can be large. The device is specified for operation over the industrial temperature range of -40°C to +125°C, making it suitable for a wide range of environments.
Typical applications include USB ports on computers, hubs, and peripherals, as well as general-purpose power switching in consumer electronics, industrial equipment, and set-top boxes. The dual-channel configuration allows two independent loads to be controlled from a single device, saving board space and cost. The TPS2062CDGNR is also ideal for powering downstream devices in systems that require hot-swap capability, such as docking stations and battery chargers.
When designing with this device, ensure that the input and output capacitors are placed close to the pins to minimize parasitic inductance and maintain stable operation. The exposed thermal pad should be soldered to a large copper area on the PCB to enhance heat dissipation, especially when operating at high currents. Additionally, the enable pins should be driven with proper logic levels to avoid unintended switching.
جایگزین‌های drop-in برای TPS2062CDGNR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
TPS2062CDGN
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
TPS2060CDGNR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
TPS2065CDGNR
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
TPS2066CDGNR
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
NCP380HMUAJAATBG
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
AP2822CKETR-G1
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
TPS2062CDGNR حداکثر مقادیر مجاز و مشخصات الکتریکی
| Number of Channels | 2 |
| نوع خروجی | High-Side N-Channel MOSFET |
| Maximum Output Current per Channel | 1 A |
| Current Limit Threshold | 1.5 A (typical) |
| Current Limit Tolerance | ±20% |
| محدوده ولتاژ ورودی | 2.7 V to 5.5 V |
| On-Resistance (RON) | 70 mΩ (typical) |
| Overcurrent Response Time | 2 µs (typical) |
| Enable Logic | Active-low |
| Output Discharge | Yes |
| Reverse Current Blocking | Yes |
| شروع نرم | Yes |
| Under-Voltage Lockout (UVLO) | Yes |
| Over-Temperature Protection | Yes |
| Short-Circuit Protection | Yes |
| محدوده دمای کاری | -40°C to +125°C |
| بسته‌بندی | 8-HVSSOP (DGK) with exposed pad |
| نوع نصب | Surface Mount |
| وضعیت RoHS | Compliant |
پیکربندی پین TPS2062CDGNR
| پین 1 | IN1 — Input power for channel 1 |
| پین 2 | EN1 — Enable for channel 1 (active low) |
| پین 3 | OUT1 — Output for channel 1 |
| پین 4 | GND — Ground |
| پین 5 | OUT2 — Output for channel 2 |
| پین 6 | EN2 — Enable for channel 2 (active low) |
| پین 7 | IN2 — Input power for channel 2 |
| پین 8 | NC — No connect |
| پین 9 | PAD — Exposed thermal pad (connect to GND) |
کاربردهای معمول
TPS2062CDGNR مناسب است برای 6 کاربردs: USB Port Power Switching, Hot-Swap Power Distribution, Set-Top Box and Consumer Electronics, Industrial Control Systems, Battery-Powered Devices, Networking Equipment.
USB Port Power Switching
The TPS2062CDGNR is ideal for USB ports on computers, hubs, and peripherals, providing dual-channel power switching with 1A per channel. Its current limiting and short-circuit protection ensure safe power delivery to downstream devices, while the fast 2µs overcurrent response protects the host controller. The active-low enable inputs allow simple logic control, and the output discharge function ensures no residual voltage when disabled. With a 70mΩ on-resistance, it minimizes voltage drop, maintaining USB voltage levels within specification.
پیشنهادی
Hot-Swap Power Distribution
In hot-swap applications, the TPS2062CDGNR provides controlled power delivery to cards or modules being inserted into a live system. Its soft-start feature limits inrush current, preventing voltage droop on the main supply. The device's current limiting and over-temperature protection safeguard both the switch and the load during fault conditions. The dual-channel configuration allows independent control of two loads, making it suitable for redundant power paths. The wide input range of 2.7V to 5.5V accommodates various system voltages.
پیشنهادی
Set-Top Box and Consumer Electronics
The TPS2062CDGNR is used in set-top boxes, gaming consoles, and smart TVs to switch power to peripheral interfaces such as USB and HDMI. Its low on-resistance reduces power loss, improving energy efficiency. The device's small 8-HVSSOP package saves board space, which is critical in compact consumer electronics. The active-low enable pins can be driven by GPIOs from a system controller, enabling power sequencing. The output discharge function ensures quick discharge of downstream capacitors when the switch is turned off, preventing glitches.
پیشنهادی
Industrial Control Systems
In industrial control systems, the TPS2062CDGNR provides reliable power switching for sensors, actuators, and communication interfaces. Its industrial temperature range of -40°C to +125°C ensures operation in harsh environments. The device's robust protection features, including overcurrent, short-circuit, and over-temperature, enhance system reliability. The dual-channel design allows two independent loads to be controlled, reducing component count. The reverse current blocking prevents back-feeding when the switch is off, protecting the power source.
پیشنهادی
Battery-Powered Devices
The TPS2062CDGNR is suitable for battery-powered devices where power efficiency and protection are critical. Its low quiescent current and 70mΩ on-resistance minimize power consumption. The device's under-voltage lockout prevents operation when the battery voltage is too low, protecting the system. The output discharge function ensures the load is fully discharged when the switch is off, preventing unintended operation. The wide input range allows operation from single-cell Li-ion batteries (3.0V to 4.2V) and dual-cell configurations.
پیشنهادی
Networking Equipment
In networking equipment such as routers and switches, the TPS2062CDGNR is used to power USB ports and other peripherals. Its fast overcurrent response protects the system from short circuits, which is essential in high-availability networks. The device's dual-channel configuration allows independent power control for different interfaces. The low on-resistance ensures minimal voltage drop, maintaining signal integrity. The device's small package and surface-mount design are ideal for high-density PCB layouts.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای TPS2062CDGNR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | TPS2062CDGN | TPS2060CDGNR | NCP380HMUAJAATBG |
|---|---|---|---|---|
| Package | 8-HVSSOP (DGK) | 8-HVSSOP (DGK) | 8-HVSSOP (DGK) | 8-HVSSOP (DGK) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | onsemi |
| Number of Channels | 2 | 2 | 2 | 2 |
| Output Current per Channel | 1 A | 1 A | 0.5 A | 1 A |
| Current Limit | 1.5 A (typ) | 1.5 A (typ) | 1 A (typ) | 1.5 A (typ) |
| On-Resistance | 70 mΩ (typ) | 70 mΩ (typ) | 70 mΩ (typ) | 70 mΩ (typ) |
| Enable Logic | Active-low | Active-low | Active-low | Active-low |
| Operating Temperature | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
تفاوت‌های کلیدی
- Dual-channel configuration with independent enable pins (در مقابلTPS2060CDGNR)
- Fast overcurrent response time of 2µs (در مقابلNCP380HMUAJAATBG)
- Wide input voltage range of 2.7V to 5.5V (در مقابلAP2822CKETR-G1)
یادداشت‌های طراحی
Place input and output capacitors (typically 10µF ceramic) as close to the IN and OUT pins as possible to minimize parasitic inductance and ensure stable operation. The exposed thermal pad (pin 9) must be soldered to a large copper area on the PCB, connected to GND, to enhance heat dissipation. Use multiple vias to connect the pad to the ground plane for improved thermal performance.
The TPS2062CDGNR has a typical on-resistance of 70mΩ, so at 1A load, the power dissipation is approximately 70mW per channel. Ensure the PCB layout provides adequate copper area to keep the junction temperature within limits. The device includes over-temperature protection, but proper thermal design is essential for reliable operation at high ambient temperatures.
Do not exceed the absolute maximum input voltage of 5.5V. The enable pins are active-low, so ensure they are properly driven to avoid unintended switching. When driving capacitive loads, the soft-start feature limits inrush current, but a large output capacitor may still cause voltage droop on the input supply; consider adding a bulk capacitor at the input. Also, note that the current limit is fixed and not adjustable, so design the system to operate within the 1A continuous rating.
اطلاعات انطباق
RoHS compliant per TI product page. Not AEC-Q100 qualified; for automotive, check TPS2062CDGNRQ1 variant.
