TPS65195YFFR 8-Channel Display Level Shifter | TI
MPN: TPS65195YFFR ✓ فعالTPS65195YFFR نمای کلی
A display level shifter is an interface IC that translates signals between voltage domains that use different electrical thresholds. This allows a host processor, graphics engine, or display controller to communicate more reliably with display-panel circuitry when input and output levels are not directly compatible. In the broader semiconductor hierarchy, the TPS65195YFFR belongs to interface ICs and, more specifically, to video interface ICs. Its eight channels allow multiple display-related signals to be handled within one package, reducing the component count compared with discrete translators.
The verified distributor listing identifies the part as an 8-channel level shifter in a 30-pin DSBGA. This combination can be valuable in compact display modules where board area is constrained and several voltage-domain crossings are required. The BGA form factor also supports dense routing, although it demands assembly processes capable of handling fine-pitch balls. Package dimensions, ball pitch, exposed-pad details, soldering profiles, and reflow requirements must be taken from the official package drawing rather than inferred from the distributor description.
Typical design use is a display controller interface, an LCD panel bias or signal interface, and a compact embedded display module. These uses follow from the verified display power and level-shifting classification; the supplied data does not enumerate supported panel interfaces or timing standards. Engineers should therefore treat the TPS65195YFFR as a display-interface candidate, not as a complete or independently characterized video processor, until channel direction, signal type, voltage ranges, and timing constraints are verified.
A key implementation consideration is validating every connected display signal against the manufacturer's absolute-maximum and recommended operating limits. Because no pinout was supplied in the verified results, no pin assignments are asserted here. The official datasheet and land-pattern information must be used to confirm signal direction, supply pins, ground pins, and unused-ball handling before PCB routing begins.
This page consolidates the verified distributor identity, package, and sourcing information with a structured engineering workflow for datasheet validation, alternative qualification, and display-interface design. It distinguishes confirmed facts from unavailable parameters rather than filling gaps with guessed electrical values.
جایگزین‌های drop-in برای TPS65195YFFR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینTPS65195YFFR مشخصات
| Manufacturer | Texas Instruments |
| Product Type | Display power and level-shifting video interface IC |
| Channel Count | 8 channels |
| بسته‌بندی | 30-pin DSBGA |
| نوع نصب | Surface mount |
| Device Classification | Video processing IC |
راهنمای پیکربندی پین TPS65195YFFR 30-pin dsbga
پیکربندی پین برای TPS65195YFFR (پکیج 30-pin dsbga). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.
داده پین‌آوت تفصیلی موجود نیست برای TPS65195YFFR.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
TPS65195YFFR مناسب است برای 6 کاربردs: Embedded LCD Display Interface, Compact Display Controller Interface, Low-Voltage Panel Signal Conditioning, Industrial HMI Panel, Portable Display Module, Video Interface Signal Conversion.
Embedded LCD Display Interface
The TPS65195YFFR fits an embedded LCD interface when the panel requires several display-related signals to cross between incompatible voltage domains. Its verified eight-channel level-shifting architecture can consolidate multiple conversions in one 30-pin DSBGA, reducing discrete translator count in a compact module. The principal engineering condition is that every panel signal must match the device's verified channel direction, supply limits, and timing characteristics. Because those electrical details were not included in the supplied records, engineers should establish a complete signal map and verify it against the official Texas Instruments datasheet before routing the PCB.
Compact Display Controller Interface
A compact display controller or graphics engine can use the TPS65195YFFR when its digital display signals operate at thresholds different from those expected by the panel electronics. The eight verified channels allow multiple display-interface signals to be handled in one package, while the 30-pin DSBGA supports dense placement beside the controller and connector circuitry. This does not imply universal compatibility with every controller family. Logic direction, propagation delay, voltage levels, and timing margins must be confirmed from the datasheet and measured in the target system.
Low-Voltage Panel Signal Conditioning
The TPS65195YFFR is applicable to low-voltage panel signal conditioning where a display controller and panel electronics use different input and output thresholds. Its verified eight-channel level-shifting role targets exactly this class of voltage-domain interface. Unlike a general-purpose buffer, the level-shifting function is intended to establish compatible signal levels across domain boundaries. The design review should check output rise and fall behavior, channel configuration, supply sequencing, and panel connector signal polarity before release.
Industrial HMI Panel
Industrial human-machine-interface panels often combine a processor, display controller, and touch or panel electronics within a limited PCB area. The TPS65195YFFR's eight channels and 30-pin DSBGA package make it a candidate for handling multiple display-interface voltage conversions in that dense environment. Industrial suitability cannot be inferred from the distributor classification alone because operating-temperature limits, ESD ratings, and lifecycle details were not supplied. Confirm those ratings and the exact channel map from the manufacturer documentation before deploying the design.
Portable Display Module
A portable display module can benefit from the TPS65195YFFR where display logic must be shifted into a lower-voltage panel domain without using several separate translators. Its verified eight-channel function and surface-mount 30-DSBGA package support compact, high-density layouts. Portable designs also make power efficiency and ordering important, but no quiescent-current, supply-current, or efficiency data was included in the verified excerpts. Those values must be obtained before comparing battery-life impact or thermal performance with alternatives.
Video Interface Signal Conversion
The TPS65195YFFR belongs in the video interface category and may be evaluated for signal conversion between a host logic domain and display circuitry with different voltage thresholds. Its eight-channel format provides several conversion paths in a single component. However, the verified data does not establish support for any particular video standard, pixel rate, lane protocol, or timing scheme. The circuit should therefore be treated as a display level-shifting interface, not as a video serializer or timing controller, until its documented electrical and protocol limits are confirmed.
داده‌های مرجع مهندسی برای TPS65195YFFR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول |
|---|---|
| Brand | Texas Instruments |
| Package | 30-pin DSBGA |
| Channel Count | 8 channels |
| Product Classification | Display power and level-shifting video interface IC |
| Lifecycle Status | Active |
تفاوت‌های کلیدی
- Integrated eight-channel display level shifting (در مقابلGeneric discrete level translators)
- Display-oriented interface positioning (در مقابلGeneral-purpose interface translators)
- Compact surface-mount integration (در مقابلLead-style discrete translators)
یادداشت‌های طراحی
Do not treat an eight-channel level shifter as automatically interchangeable with another device having the same channel count. Verify the complete 30-ball pinout, logic direction, supply rails, input and output thresholds, propagation delay, and timing constraints against the official Texas Instruments datasheet. A PCB-level drop-in claim requires matching every ball assignment and every electrically relevant parameter; otherwise, treat any proposed replacement as a redesign-level substitution.
Reserve the manufacturer-recommended 30-DSBGA land pattern and place the device close to the display interface signals it serves. Route each translated signal as a short, continuous path, keep the supply and ground connections short, and avoid sharing sensitive display nets with unrelated high-current routing. The supplied material does not include ball pitch, pad geometry, or layer-count guidance, so those layout details must come directly from the package drawing.
Calculate the regulator or level-shifter dissipation only after the actual supply voltage, output voltage, and channel loading are known. Because the supplied TPS65195YFFR data contains no quiescent current or channel-current ratings, do not substitute generic values. Confirm operating current, static supply current, and channel loading from the datasheet, then verify that the display power source has adequate transient and thermal capability.
اطلاعات انطباق
The supplied verified search results do not provide device-specific compliance declarations. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the current manufacturer documentation.
