VSC7224XJV - 12.5Gbps 4-Channel CDR Retimer | Microchip
MPN: VSC7224XJV ✓ فعالVSC7224XJV نمای کلی
A retimer with clock and data recovery is a specialized interface IC that receives a high-speed serial signal, recovers its transmitted clock and data, applies programmable equalization, and reserializes the conditioned data. Within the interface-IC hierarchy, the VSC7224 belongs to the retimer and redriver class. Unlike a simple redriver, which amplifies and reshapes an existing signal, a retimer can regenerate the signal through a CDR stage, improving interoperability across lossy channels.
The VSC7224 family supports multiple rate grades. Manufacturer information identifies operation up to 10.3 Gbps, 11.5 Gbps, or 12.5 Gbps depending on the selected product variant. The VSC7224XJV is listed as a four-channel 12.5 Gbps retimer/redriver, while the VSC7224XJV-01 is identified as an 11.5 Gbps variant. Analog and digital equalization provide compensation for frequency-dependent loss, and output de-emphasis helps control edge amplitude and reduce signal-integrity problems on longer channels.
The 48-QFN package consolidates four channels into a compact footprint suitable for telecommunications equipment, data-processing systems, and high-speed backplane links. Because the device performs CDR rather than only analog amplification, it is particularly useful when transmitter and receiver clocking cannot tolerate accumulated deterministic jitter or signal degradation. Designers must still preserve controlled impedance, provide adequate power and ground connectivity, and verify the configuration for the target data rate and channel loss.
Typical uses include 10G/25G-class serial links, telecommunications backplanes, server and networking equipment, and cable or copper interconnects. The VSC7224 is most appropriate when each link requires independent equalization and clock recovery rather than simple gain compensation. Its four-channel organization can also reduce board-area requirements compared with implementing four separate single-channel signal-conditioning devices.
Layout quality is critical in multirate retimer designs. Place input and output bypass capacitors close to their associated supply pins, maintain continuous ground-plane return paths, and route high-speed differential pairs as short, impedance-controlled transmission lines. Avoid adding test pads or long branch stubs on sensitive channels, because parasitic capacitance and inductance can degrade eye opening even when the equalizer is correctly configured.
This page consolidates the manufacturer’s device architecture, exact variant distinctions, sourcing information, and application-specific engineering guidance. It also distinguishes the 12.5 Gbps VSC7224XJV from the 11.5 Gbps VSC7224XJV-01, helping designers select the correct speed grade and plan a repeatable high-speed layout.
جایگزینهای drop-in برای VSC7224XJV — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
VSC7224XJV-01
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
VSC7224XJV مشخصات
| Product Type | 4-channel unidirectional adaptive channel extender with CDR |
| Maximum Data Rate | 12.5 Gbps |
| Channel Count | 4 channels |
| Transmission Direction | Unidirectional |
| Equalization | Analog and digital equalization |
| Clock and Data Recovery | Integrated CDR |
| Output Equalization | Output de-emphasis |
| بستهبندی | 48-QFN |
| Package Dimensions | 5 mm x 9 mm |
| تعداد پایه | 48 pins |
| نوع نصب | Surface mount |
| Supported Interconnect Types | Cable, copper, and backplane |
راهنمای پیکربندی پین VSC7224XJV 5 mm x 9 mm
پیکربندی پین برای VSC7224XJV (پکیج 5 mm x 9 mm). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای VSC7224XJV.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
VSC7224XJV مناسب است برای 6 کاربردs: 12.5 Gbps Telecommunications Backplane Links, High-Speed Copper Cable Compensation, Networking and Data-Processing Equipment, Telecom Line Cards and Remote Equipment, Server and Storage Interconnect Links, Connector and PCB Interconnect Equalization.
12.5 Gbps Telecommunications Backplane Links
The VSC7224XJV suits four independent 12.5 Gbps backplane channels because it combines clock and data recovery with analog equalization, digital equalization, and output de-emphasis in each lane. The four-channel arrangement consolidates conditioning functions that might otherwise require separate single-channel retimers, reducing board footprint and simplifying channel management. Equalization is particularly useful when a backplane introduces frequency-dependent insertion loss, while CDR regeneration can improve timing margin when jitter and waveform degradation accumulate across the channel. Layout must maintain controlled differential impedance and a continuous ground reference so that package and PCB parasitics do not consume the margin gained through equalization.
پیشنهادی
High-Speed Copper Cable Compensation
The VSC7224XJV can compensate for signal degradation across copper cable links operating up to 12.5 Gbps. Its analog and digital equalization stages address different aspects of channel loss, while the integrated CDR recovers timing information before the signal is transmitted onward. Output de-emphasis provides an additional control point for reducing excessive high-frequency content at the transmitter output. For cable assemblies and PCB interconnects with known insertion-loss profiles, engineers can tune the device to the channel rather than relying only on fixed repeater gain. Validation should cover eye diagram, jitter tolerance, and BER across the full intended data range and environmental conditions.
پیشنهادی
Networking and Data-Processing Equipment
The four-channel architecture of the VSC7224XJV is well matched to networking appliances, data processors, and line-card equipment that require several high-speed links to cross a compact PCB or connector boundary. Conditioning four lanes in one 48-QFN package helps reduce the number of discrete retimer locations around a high-speed fabric. At rates up to 12.5 Gbps, the CDR can regenerate degraded transmit signals and recover embedded clock and data before they reach the next circuit block. Designers should reserve careful high-speed routing space and avoid introducing impedance discontinuities through unnecessary vias, long stubs, or poorly modeled connector transitions.
پیشنهادی
Telecom Line Cards and Remote Equipment
In telecom line cards and remote equipment, board traces, connectors, and cables can combine to create a lossy channel that degrades a 12.5 Gbps signal. The VSC7224XJV addresses this impairment with programmable analog and digital equalization, clock and data recovery, and output de-emphasis. Recovering and regenerating the signal is valuable when receiver timing margin is limited by accumulated jitter and deterministic distortion. The compact 48-QFN 5 mm by 9 mm package also allows four channels to be placed near a board edge or connector. Thermal and power qualification must be checked under the maximum channel activity expected in the finished equipment.
پیشنهادی
Server and Storage Interconnect Links
The VSC7224XJV can extend and condition high-speed links used inside server, storage, and accelerator platforms when board-level loss impairs a 12.5 Gbps interface. Its integrated CDR distinguishes it from a passive redriver and allows the output waveform to be regenerated rather than merely amplified. Four channels can be placed at a shared interconnect boundary, providing consistent equalization and timing recovery for multiple lanes. The implementation should account for the device’s complete power, ground, reference-clock, and configuration requirements from the family datasheet. Channel-by-channel BER and eye-margin testing is essential when equalization is tuned for a specific connector and PCB stack-up.
پیشنهادی
Connector and PCB Interconnect Equalization
The VSC7224XJV is suitable for links passing through high-speed connectors, mezzanine boards, or long PCB routes where insertion loss threatens signal integrity. Its analog and digital equalization functions provide a combined method for restoring the received waveform, and CDR separates the recovered data from its clock before the conditioned signal leaves the device. Output de-emphasis can be adjusted to suit the downstream channel and reduce excessive edge energy. Place the retimer close to the loss-producing transition when practical, while preserving symmetric high-speed routing and adequate return-path continuity. Verify the chosen settings with measured channel loss rather than relying only on nominal connector specifications.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای VSC7224XJV — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | VSC7224XJV-01 |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 48-QFN (5x9) | 48-QFN (5x9) |
| Maximum Data Rate | 12.5 Gbps | 11.5 Gbps |
| Channel Count | 4 channels | 4 channels |
| Architecture | Unidirectional channel extender with CDR | Quad retimer/redriver |
تفاوتهای کلیدی
- Higher supported data rate than the same-package VSC7224XJV-01 (در مقابلVSC7224XJV-01)
- Four unidirectional channels integrated in one package (در مقابلVSC7224XJV-01)
- Integrated channel-compensation functions (در مقابلVSC7224XJV-01)
یادداشتهای طراحی
Route each VSC7224XJV differential pair as a controlled-impedance transmission line with a continuous reference plane. Avoid layer transitions, long stubs, test pads, and unnecessary vias on the data paths because their parasitic effects can reduce eye opening at 12.5 Gbps. Match the PCB stack-up and trace geometry to the impedance required by the complete transmitter-to-receiver channel, and keep the retimer close to the major discontinuity when placement permits.
Place the required bypass capacitors adjacent to the device’s supply and ground pins, and provide uninterrupted low-impedance connections from each power pin into the relevant plane. Do not infer the supply voltage, current, sequencing, or exposed-pad requirements from the family summary; use the manufacturer pin and electrical tables for the exact VSC7224XJV configuration. Confirm the power distribution network supports four active channels and the highest intended data rate.
Treat equalization and output de-emphasis as channel-specific settings. Characterize insertion loss, return loss, and jitter for the actual cable, connector, and PCB stack-up before finalizing configuration. Validate the result with eye diagrams and BER measurements at the target rate. The VSC7224XJV’s CDR can regenerate a degraded signal, but it cannot compensate for an incorrectly implemented physical channel or unsuitable equalizer settings.
Estimate power loss and junction temperature using the exact supply voltage, current, and ambient conditions required by the finished system. The 48-QFN package uses its exposed thermal structure for heat transfer, so the PCB land pattern and copper area must follow the manufacturer’s package guidance. Avoid creating a thermal path between the device and temperature-sensitive circuitry, and verify performance in the worst expected channel-activity and ambient conditions.
اطلاعات انطباق
The manufacturer product page and distributor listings do not state the requested compliance attributes. AEC-Q100 is not applicable to this telecom interface IC.