XC3S200-4VQ100I - 200K Gate Spartan-3 FPGA | AMD
MPN: XC3S200-4VQ100I ✗ پایان تولیدXC3S200-4VQ100I نمای کلی
A Spartan-3 FPGA is a reconfigurable digital semiconductor in the FPGA and CPLD product hierarchy. Unlike a fixed-function microcontroller or application-specific integrated circuit, an FPGA allows engineers to define parallel logic, state machines, interfaces, and data-processing functions in hardware. Its configurable interconnect routes signals among logic cells, dedicated block RAM, multipliers, and general-purpose I/O, making the device suitable for designs requiring deterministic timing and flexible hardware architecture.
The XC3S200-4VQ100I provides 200000 system gates and 4320 logic elements according to distributor listings. The family-level product information also identifies 12 block RAMs, 12 multipliers, and 4 digital clock managers for designs requiring embedded memory, dedicated arithmetic, and clock-management resources. Its 1.2 V core supply and 100-pin TQFP package provide a practical balance between capability, I/O access, and board footprint.
The “-4” portion identifies the device speed grade, while “VQ100” identifies the 100-pin package configuration and “I” identifies the industrial temperature grade. These ordering codes allow procurement teams to distinguish devices that otherwise belong to the same Spartan-3 family. Because FPGA designs depend on the configuration file, device speed, pinout, memory resources, and supported I/O standards, engineers should verify the exact ordering code against the AMD/Xilinx datasheet and board constraints before substitution.
Typical uses include industrial control logic, low-latency communication interfaces, data acquisition, embedded signal processing, test equipment, and general-purpose embedded systems. The 100-pin package is particularly useful where a larger FPGA would be unnecessary and where external SDRAM or a high-pin-count BGA package would add unnecessary board complexity. Its integrated resources can reduce external logic-component count while retaining software-side reconfiguration flexibility.
The primary design consideration is package-level resource and signal-integrity verification. The 100-TQFP footprint requires exact land-pattern, pin-orientation, and power-decoupling review before layout release. Engineers should also account for configuration memory, configuration interface, clocking, I/O voltage limits, unused pins, and startup behavior in the complete FPGA design rather than treating the FPGA only as a collection of logic blocks.
This product page consolidates verified distributor specifications, package information, ordering-code details, sourcing links, and engineering guidance. It also distinguishes a genuine same-footprint replacement from a merely similar FPGA family member and records unknown technical values explicitly for engineers to confirm in the manufacturer datasheet.
جایگزین‌های drop-in برای XC3S200-4VQ100I — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای XC3S200-4VQ100I (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Device Type, Core Supply Voltage, System Gates, Temperature Grade, Package.
XC3S200-4VQG100I
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XC3S200-4VQ100C
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC3S200-5VQ100I
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC3S200-5VQ100C
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC3S200-2VQ100I
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC3S200-4VQ100I حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Spartan-3 field-programmable gate array (FPGA) |
| System Gates | 200000 system gates |
| Logic Elements | 4320 logic elements |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -4 |
| Package Type | 100-TQFP |
| Package Dimensions | 14 mm × 14 mm |
| نوع نصب | Surface mount |
| Block RAM | 12 block RAMs |
| Dedicated Multipliers | 12 multipliers |
| Digital Clock Managers | 4 digital clock managers |
| Temperature Grade | Industrial grade |
راهنمای پیکربندی پین XC3S200-4VQ100I 14 mm × 14 mm
پیکربندی پین برای XC3S200-4VQ100I (پکیج 14 mm × 14 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای XC3S200-4VQ100I.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
XC3S200-4VQ100I مناسب است برای 6 کاربردs: Industrial Control Logic, Data Acquisition and Signal Conditioning, Communication Protocol Conversion, Embedded Video Processing, Test and Measurement Equipment, Automotive and Transportation Control.
Industrial Control Logic
The XC3S200-4VQ100I fits industrial control logic because its 200000 system gates, 4320 logic elements, and dedicated Spartan-3 resources support parallel control algorithms, sequencing, and digital I/O handling. The 100-TQFP package exposes a substantial I/O count for sensors, actuators, interlocks, and communications without requiring a large BGA footprint. Its industrial-grade ordering designation is appropriate for equipment requiring an extended environmental class, although the exact temperature limits must be confirmed. Engineers should use the -4 speed grade to close timing-critical control paths and validate the final design with post-route timing analysis.
پیشنهادی
Data Acquisition and Signal Conditioning
The XC3S200-4VQ100I is suitable for programmable data-acquisition front ends where parallel sampling, digital filtering, channel control, and data buffering must operate deterministically. Its 4320 logic elements can implement control and interface logic, while the listed 12 block RAMs provide on-chip storage for acquisition pipelines. The 100-pin TQFP arrangement supports external converters, clocks, and digital interfaces. Compared with a microcontroller-only implementation, the FPGA can execute several parallel channels simultaneously. Engineers should budget external memory if the capture depth exceeds the available block RAM and verify acquisition timing against the implemented design.
پیشنهادی
Communication Protocol Conversion
The XC3S200-4VQ100I fits communication protocol conversion because programmable logic can bridge interfaces with different clocks, framing rules, and data widths. The 200000 system gates and 4320 logic elements provide capacity for parallel-to-serial conversion, FIFOs, clock-domain handling, and packet processing, while 12 block RAMs can support receive and transmit buffering. Its 100-TQFP package allows implementation on a compact board with dedicated transceivers. The principal trade-off is that interface timing and electrical standards must be validated at the pin level rather than inferred solely from the device family name.
پیشنهادی
Embedded Video Processing
The XC3S200-4VQ100I can be used for embedded pixel-stream processing, timing generation, and control in compact video systems. Its programmable logic fabric supports parallel pixel manipulation, synchronization, and interface timing that would otherwise require multiple fixed-function devices. The family-level listing identifies 12 block RAMs, which can implement line buffers or small frame-processing queues, and the 100-pin package supports external memory and video-device connections. Design engineers should verify bandwidth, external memory interface requirements, and timing closure for the target resolution before selecting this device.
پیشنهادی
Test and Measurement Equipment
The XC3S200-4VQ100I is appropriate for programmable test and measurement logic requiring deterministic sequencing, parallel stimulus generation, and flexible acquisition paths. The Spartan-3 architecture allows instruments to reconfigure measurement algorithms without changing fixed hardware, while the 4320 logic elements and 12 block RAMs support timing control and sample buffering. The 100-TQFP package simplifies instrument construction by providing many I/O pins in a moderate footprint. Engineers should include calibration, trigger latency, and data-valid timing in system verification because these depend on the implemented test sequence rather than the generic FPGA specification.
پیشنهادی
Automotive and Transportation Control
The XC3S200-4VQ100I can support logic-intensive transportation and industrial vehicle subsystems where parallel control, diagnostics, and interface adaptation are required. Its industrial ordering grade and 4320 logic elements permit implementation of state machines, fault handling, and communication logic in a 100-pin TQFP package. The device is not presented as an AEC-Q100-qualified automotive part, so it should not be used where that qualification is contractually required. Engineering teams must confirm temperature limits, transient immunity, functional safety strategy, and supply-chain traceability at the system level.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای XC3S200-4VQ100I — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | XC3S200-4VQG100I | XC3S200-4VQ100C | XC3S200-5VQ100I | XC3S200-5VQ100C | XC3S200-2VQ100I |
|---|---|---|---|---|---|---|
| Package | 100-TQFP | 100-TQFP - same package | 100-TQFP - same package family | 100-TQFP - same package family | 100-TQFP - same package family | 100-TQFP - same package family |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Spartan-3 FPGA | Spartan-3 FPGA | Spartan-3 FPGA | Spartan-3 FPGA | Spartan-3 FPGA | Spartan-3 FPGA |
| Logic Elements | 4320 logic elements | 4320 logic elements | 4320 logic elements | 4320 logic elements | 4320 logic elements | 4320 logic elements |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | -4 | -4 | -4 | -5 | -5 | -2 |
| Block RAM | 12 block RAMs | 12 block RAMs | 12 block RAMs | 12 block RAMs | 12 block RAMs | 12 block RAMs |
| Dedicated Multipliers | 12 multipliers | 12 multipliers | 12 multipliers | 12 multipliers | 12 multipliers | 12 multipliers |
| Digital Clock Managers | 4 digital clock managers | 4 digital clock managers | 4 digital clock managers | 4 digital clock managers | 4 digital clock managers | 4 digital clock managers |
تفاوت‌های کلیدی
- Exact industrial -4 ordering configuration (در مقابلXC3S200-4VQ100C)
- Closest verified ordering match (در مقابلXC3S200-4VQG100I)
- Higher-performance upgrade option on the same footprint (در مقابلXC3S200-5VQ100I)
- Lower-speed cost-oriented family option (در مقابلXC3S200-2VQ100I)
یادداشت‌های طراحی
Treat the 100-TQFP land pattern as an exact footprint constraint. Verify pin 1 orientation, exposed-pad or lead geometry, solder-mask clearance, paste stencil apertures, and courtyard spacing against the exact package drawing before release. The verified data confirms a 14 mm × 14 mm package but does not provide a complete pin table, so the mechanical source drawing must control the PCB footprint rather than a generic TQFP template.
Provide separate, low-impedance supply paths for the 1.2 V FPGA core and any required auxiliary or I/O supplies. Place local bulk and high-frequency decoupling at the relevant supply pins, provide a low-impedance ground reference, and keep switching-regulator return current out of sensitive return paths. Because the supplied data does not include recommended capacitor values or per-rail current limits, use the manufacturer power-guidance document and the implemented design's estimated consumption.
Separate clocks, high-speed I/O, and configuration signals from noisy analog or power-conversion areas. Route clock distribution predictably, provide solid ground planes without accidental splits, and apply the device-specific I/O drive, slew, and termination rules in the implemented design. Unused pins must be treated according to the exact datasheet rather than the manufacturer family summary. Review the final placement against signal-integrity and EMC requirements because the 100-lead package has less routing flexibility than a larger BGA.
Do not substitute by family name alone. A valid replacement must match the package drawing, pinout, configuration method, core voltage, supported I/O standards, and speed grade. The target's industrial suffix, -4 speed grade, and VQ100 package are ordering attributes that affect qualification or timing. Re-run synthesis, implementation, and timing analysis for every different speed-grade candidate, and validate configuration files against the exact replacement device before production use.
اطلاعات انطباق
The verified results identify the device as an industrial-grade Spartan-3 FPGA but do not provide current RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statements. The supplied DigChip result mentions lead-free in a generic extracted specification field, but it does not establish this package variant's complete compliance status.
