AMD

XC3S200A-5FTG256C - 200K Spartan-3A FPGA | AMD Xilinx

MPN: XC3S200A-5FTG256C ✓ فعال
1.2 V Vdss TMDS, PPDS, SSTL3 Class I and II Rds(on) 256-FTBGA (17 x 17 mm) Package
حداقل سفارش: 1 |

XC3S200A-5FTG256C نمای کلی

The AMD Xilinx XC3S200A-5FTG256C is a Spartan-3A field-programmable gate array built on a 90 nm process for logic-dense embedded systems, telecommunications equipment, industrial control, and consumer electronics. It provides 4,032 logic cells, 448 configurable logic blocks, 200,000 equivalent gates, 294,912 RAM bits, and 195 user I/Os in a 17 x 17 mm 256-FTBGA package.

An FPGA is a programmable semiconductor whose digital circuits are defined by a configuration bitstream rather than a fixed mask set. Within the broader hierarchy, this device is an FPGA, a reconfigurable digital logic IC, and ultimately a semiconductor. It allows parallel processing, state machines, interfaces, protocol bridging, and fixed-function acceleration to be consolidated into one device without developing a custom ASIC.

The Spartan-3A architecture combines logic resources with block RAM, dedicated multipliers, and programmable I/O. The -5 speed designation indicates a higher speed grade than -4 devices, while the C suffix denotes the commercial operating-temperature grade. The family supports single-ended and differential I/O standards, including TMDS, PPDS, SSTL3 Class I and II, plus interface IP for PCI, PCI Express, USB, FireWire, CAN, SPI, and I2C designs.

This part provides 195 user I/Os and operates from a 1.14 V to 1.2 V internal supply range in the available device documentation. Its 770 MHz maximum performance figure, 4032 logic cells, and 448 CLBs make it suitable for medium-complexity control logic, multi-interface adapters, embedded protocol bridges, and display-oriented signal processing where a larger FPGA would be unnecessary.

Typical applications include industrial automation controllers, telecommunications line and data-plane equipment, consumer video and display interfaces, network interface adapters, embedded storage controllers, and general-purpose digital prototyping. Hot-swap-capable I/O resources and differential signaling support also suit designs where board-level interface reliability and signal integrity are important.

When planning a PCB layout, follow the AMD pinout and package information for the FTG256 ball grid, including power, configuration, clock, and user-I/O ball assignments. Confirm the selected configuration memory interface, supply sequencing, decoupling requirements, and differential-pair routing rules before releasing the board layout.

This page adds application-specific guidance, engineering design notes, comparison parameters, and practical drop-in alternatives to the basic device specifications. It helps engineers evaluate the XC3S200A-5FTG256C against related Spartan-3A devices before committing a legacy or long-lived design to the FTG256 footprint.

جایگزین‌های drop-in برای XC3S200A-5FTG256C — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای XC3S200A-5FTG256C (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Operating Temperature, Device Type, Logic Cells, Package, System Gates.

AMD
Operating Temperature: 0°C to 85°C
Device Type: Field-Programmable Gate Array (FPGA)
Logic Cells: 192 logic cells
مقایسه با XC3S200A-5FTG256C →
AMD
Operating Temperature: 0 to 85 C
Device Type: FPGA
Package: 256-LBGA
مقایسه با XC3S200A-5FTG256C →
Xilinx
Operating Temperature: -40C to +100C (industrial)
Logic Cells: 4,032
Package: 256-ball FTBGA (FTG256), 17x17 mm, 1.0 mm pitch
مقایسه با XC3S200A-5FTG256C →

XC3S200A-4FTG256C

✅ جایگزین مستقیم
AMD
📦 256-FTBGA (17 x 17 mm)
Spartan-3A field-programmable gate array (FPGA) · 4032 cells · Approximately 200000 gates · 195 I/Os · 667 MHz · 448 CLBs · 90 nm CMOS · 1.2 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XC3S200A-4FTG256I

✅ جایگزین مستقیم
Xilinx
📦 256-FTBGA (17 x 17 mm)
Spartan-3A · 200,000 · 4,032 · 448 · 1,792 · 48 Kbits · 288 Kbits · 195

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XC3S200AN-5FT256C

✅ جایگزین مستقیم
📦 256-FTBGA (17 x 17 mm)
Related Spartan-3AN device with the same 4032 cells, 448 CLBs, and 200,000-gate class; verify exact FT256 ball assignments and any Spartan-3AN-specific configuration requirements.

📋 جایگزین مرجع (خارج از کاتالوگ)

XC3S200AN-4FTG256I

✅ جایگزین مستقیم
📦 256-FTBGA (17 x 17 mm)
Same 4032-cell and 448-CLB Spartan-3AN resource class in the 256-ball family; the -4 speed grade is lower and the I suffix identifies industrial temperature.

📋 جایگزین مرجع (خارج از کاتالوگ)

XC3S200-5FTG256C

✅ جایگزین مستقیم
AMD
📦 256-FTBGA (17 x 17 mm)
FPGA · Spartan-3 · 200000 gates · 4320 logic cells · 725 MHz · 1.2 V · 90 nm · 256-LBGA

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XC3S200A-5FTG256C حداکثر مقادیر مجاز و مشخصات الکتریکی

Device Type Field Programmable Gate Array (FPGA)
FPGA Family Spartan-3A
Logic Cells 4032 cells
Configurable Logic Blocks 448 CLBs
Equivalent Gates 200000 gates
Total RAM Bits 294912 bits
User I/O Count 195 I/Os
Maximum Performance 770 MHz
Process Technology 90 nm
ولتاژ تغذیه 1.2 V
Minimum Operating Supply Voltage 1.14 V
بسته‌بندی 256-FTBGA (17 x 17 mm)
نوع نصب SMD (SMT)
دمای کاری 0 °C to 85 °C (TJ)
Number of LABs 448 LABs
Supported Differential I/O Standards TMDS, PPDS, SSTL3 Class I and II
Supported Interface Standards PCI, PCI Express, USB, FireWire, CAN, SPI, I2C
وضعیت RoHS Compliant
Device Documentation Spartan-3A FPGA Family Data Sheet, DS529

راهنمای پیکربندی پین XC3S200A-5FTG256C 256-ftbga (17 x 17 mm)

پیکربندی پین برای XC3S200A-5FTG256C (پکیج 256-ftbga (17 x 17 mm)). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 256-ftbga (17 x 17 mm) برای XC3S200A-5FTG256C

داده پین‌آوت تفصیلی موجود نیست برای XC3S200A-5FTG256C.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

XC3S200A-5FTG256C مناسب است برای 6 کاربردs: Industrial Automation and Control, Telecommunications Line and Data Interfaces, Display and Video Signal Conditioning, Embedded Protocol Bridge, Consumer Electronics and Interface Consolidation, Digital Prototyping and Legacy System Extension.

🏭

Industrial Automation and Control

The XC3S200A-5FTG256C fits machine-control logic where several real-time interfaces must share one programmable controller. Its 4032 logic cells and 448 CLBs can host motion sequencing, state machines, and protocol handling, while 294,912 RAM bits support packet buffering and data tables. The 195 I/Os provide ample connection capacity for encoders, discrete sensors, and actuator outputs. The commercial -5FTG256C grade targets controlled installations operating within a 0 °C to 85 °C junction-temperature range; use an industrial-temperature variant when enclosure conditions exceed that window.

🌐

Telecommunications Line and Data Interfaces

The Spartan-3A device is suited to telecommunications adapter and protocol-conversion designs that require parallel logic, configurable memory, and numerous high-speed user I/Os. The 195 I/Os can support multiple parallel data channels, while the FPGA architecture permits simultaneous header parsing, buffering, and flow control. Its family support for interfaces including PCI, PCI Express, USB, FireWire, CAN, SPI, and I2C enables consolidation of otherwise separate interface controllers. Differential I/O standards such as SSTL3 and TMDS further assist designs using high-speed links, subject to the VCCO and bank-voltage constraints in the family data sheet.

📺

Display and Video Signal Conditioning

The XC3S200A-5FTG256C can implement timing generation, signal conversion, and control logic around digital display interfaces. Its I/O resources support the Spartan-3A family's TMDS and PPDS signaling options, which are relevant to panels and video adapters that require deterministic data transmission and reduced crosstalk. The available 294,912 RAM bits provide line buffers or frame-staging memory, and the 4032 logic cells can handle parallel-to-serial conversion, timing generators, and synchronization. Exact performance depends on the selected I/O standard, data rate, board-level signal integrity, and the timing constraints of the design.

🔧

Embedded Protocol Bridge

This FPGA is useful for bridging incompatible serial and parallel interfaces without relying on several discrete protocol controllers. Its 448 CLBs and 294,912 RAM bits allow concurrent master and slave state machines, FIFOs, and packet filters, while 195 I/Os permit flexible assignment across multiple buses. Supported family IP for SPI, I2C, CAN, USB, FireWire, and PCI-related interfaces accelerates development of bridges between legacy peripherals and modern host systems. The -5 speed grade can improve timing margin on moderately critical paths, although final closure must be confirmed with the production constraints and the AMD timing analyzer.

🧩

Consumer Electronics and Interface Consolidation

Consumer products often need flexible I/O, short product cycles, and support for several communication standards. The XC3S200A-5FTG256C can consolidate display control, storage interfaces, infrared functions, and general-purpose logic into a single device. Its 195 user I/Os leave sufficient board space for mixed-signal peripheral assignments, and the 90 nm Spartan-3A architecture provides a practical balance between programmable functionality and cost. Designers should evaluate configuration memory, boot behavior, and the availability of a stable supply for a long-lived product before committing the legacy family to a new commercial design.

⚡

Digital Prototyping and Legacy System Extension

The XC3S200A-5FTG256C works well for expanding or emulating logic in systems where a CPLD is too small or a new ASIC is impractical. The 4032 logic cells and 448 CLBs allow complex test logic, state machines, and interface adapters to be developed in a single programmable device. Because the FTG256 package supports a well-documented ball map and the same architecture appears in related order codes, it can simplify board reuse. Always compare the exact ball assignments, power requirements, configuration pins, and speed grade of the original device before treating a related Spartan-3A or Spartan-3AN part as a drop-in replacement.

خلاصه محصولات پیشنهادی

XC3S200A-4FTG256C AMD استفاده‌شده در: Industrial Automation and Control, Display and Video Signal Conditioning, Embedded Protocol Bridge, Digital Prototyping and Legacy System Extension XC3S200A-4FTG256I Xilinx استفاده‌شده در: Industrial Automation and Control, Consumer Electronics and Interface Consolidation XC3S200AN-5FT256C Related Spartan-3AN interface controller استفاده‌شده در: Telecommunications Line and Data Interfaces, Embedded Protocol Bridge XC3S200AN-4FTG256I Industrial-temperature interface option استفاده‌شده در: Telecommunications Line and Data Interfaces, Consumer Electronics and Interface Consolidation XC3S200-5FTG256C AMD استفاده‌شده در: Display and Video Signal Conditioning, Digital Prototyping and Legacy System Extension
What is the XC3S200A-5FTG256C?
The XC3S200A-5FTG256C is an AMD Xilinx Spartan-3A FPGA with 4032 logic cells, 448 configurable logic blocks, 294,912 RAM bits, and 195 user I/Os. It is packaged in a 256-FTBGA measuring 17 x 17 mm and is fabricated on a 90 nm process. According to the Spartan-3A Family Data Sheet, it combines programmable logic, block RAM, dedicated arithmetic resources, and high-speed I/O for embedded control, communications, and consumer applications.
Where can I download the XC3S200A-5FTG256C datasheet PDF?
The official Spartan-3A Family Data Sheet is available from AMD at https://docs.amd.com/v/u/en-US/ds529. The document is identified as DS529 and contains the introduction, ordering information, architecture, specifications, package information, and pinouts for the Spartan-3A family. Use the FTG256 package section when assigning ball locations and power connections, and use the XC3S200A speed-grade and temperature-ordering tables when interpreting the -5FTG256C suffix.
Where can I find the XC3S200A-5FTG256C pinout?
The XC3S200A-5FTG256C pinout appears in the FTG256 package section of the AMD Spartan-3A Family Data Sheet. Use the package pinout tables to identify power, configuration, clock, and user I/O balls, and follow the package drawing for ball orientation and the exposed thermal behavior of the 256-FTBGA. Board designers should also apply the AMD package and PCB design guidance because the BGA land pattern, via arrangement, and thermal-via plan determine soldering and heat-transfer performance.
What are the key specifications of XC3S200A-5FTG256C?
The principal XC3S200A-5FTG256C specifications are 4032 logic cells, 448 CLBs, 294,912 RAM bits, 195 user I/Os, a 90 nm process, and a 256-FTBGA package. The device documentation also lists a maximum performance figure of 770 MHz and a 1.2 V supply. These resources place the part between small CPLDs and larger FPGAs, making it appropriate for multi-interface embedded systems that need substantial parallel logic without the cost or complexity of a high-end device.
What does the -5FTG256C suffix mean?
The -5 portion identifies the device speed grade, while FTG256 identifies the 256-ball FTBGA package and C identifies the commercial temperature grade. The listed operating range is 0 °C to 85 °C based on junction temperature. A -4FTG256C device uses the same Spartan-3A family and FTG256 package but a lower speed grade, while an -4FTG256I part is the industrial-temperature counterpart with a wider operating range.
Can XC3S200A-4FTG256C replace XC3S200A-5FTG256C?
The XC3S200A-4FTG256C is a close drop-in candidate because it uses the same Spartan-3A family, 256-FTBGA package, 4032 logic cells, 448 CLBs, 195 I/Os, and commercial temperature grade. The principal difference is the speed grade: -4 is slower than -5. It is therefore suitable when the design does not rely on the higher -5 timing performance, but timing closure should be revalidated with the production design tools and the selected clock targets.
What is the difference between XC3S200A-5FTG256C and XC3S200A-4FTG256I?
The XC3S200A-5FTG256C is the faster commercial-temperature variant, while the XC3S200A-4FTG256I uses the same Spartan-3A resource organization and FTG256 package with a lower speed grade and industrial temperature designation. Both provide 4032 logic cells, 448 CLBs, 294,912 RAM bits, and 195 I/Os according to the family documentation. Choose the -5FTG256C when commercial temperature and maximum speed matter; choose the -4FTG256I when industrial temperature conditions outweigh the lower speed grade.
When should I choose the XC3S200A-5FTG256C over a lower-speed Spartan-3A?
Choose the XC3S200A-5FTG256C when the design benefits from the higher -5 speed grade, uses the commercial 0 °C to 85 °C junction-temperature range, and fits the 256-FTBGA resource and I/O targets. Its 4032 logic cells, 294,912 RAM bits, and 195 I/Os are appropriate for medium-complexity control systems, protocol converters, and display interfaces. Select a -4 device only after confirming that its timing margin is adequate for every clocked path.
Is the XC3S200A-5FTG256C suitable for industrial control applications?
The XC3S200A-5FTG256C is appropriate for commercial-temperature industrial equipment installed in controlled environments, but its listed junction-temperature range is 0 °C to 85 °C. For deployments exposed to wider temperature extremes, the XC3S200A-4FTG256I shares the Spartan-3A architecture and FTG256 footprint while carrying the industrial-temperature designation. Confirm enclosure temperature, board self-heating, and the required regulatory temperature grade before selecting either device.
What can replace the XC3S200A-5FTG256C?
The closest same-family replacements are the XC3S200A-4FTG256C and XC3S200A-4FTG256I, both using the Spartan-3A architecture and 256-FTBGA footprint. The XC3S200AN-5FT256C and XC3S200AN-4FTG256I are related Spartan-3AN options identified in cross-reference results. Because speed grade, temperature grade, and pinout details differ, treat each as a design-review candidate rather than an automatic substitution. Use the AMD DS529 package tables and your timing constraints to confirm compatibility.
What is the best AMD Xilinx equivalent for XC3S200A-5FTG256C?
The most direct AMD Xilinx candidates are the XC3S200A-4FTG256C, XC3S200A-4FTG256I, XC3S200AN-5FT256C, and XC3S200AN-4FTG256I because the family comparison identifies matching 256-ball package options and the same 4032-cell, 448-CLB Spartan-3A resource level. No separate cross-brand drop-in replacement is established in the available family data. The correct choice depends on speed grade, temperature range, exact ball assignments, and whether the design is constrained to the original Spartan-3A or may use Spartan-3AN features.
Is XC3S200A-5FTG256C currently available and what is the lead time?
Current inventory, scheduled delivery, and minimum order quantity should be requested through the Request a Quote form on this page. The device is listed as active in the available product listing, but that status does not guarantee immediate stock or a fixed production window. When requesting a quote, state the required quantity, date code requirements, target price, and whether the design must retain the exact FTG256 footprint and original source configuration.
How do I buy XC3S200A-5FTG256C online?
Use the Request a Quote form on this page to request XC3S200A-5FTG256C pricing, inventory, and lead time from XAIPART. Include the quantity, target date code, and any lot-traceability requirements in the request. Because this is a legacy Spartan-3A device, a quotation is more useful than a generic catalog listing because availability can change by lot and configuration. Confirm that the supplied order code uses the 256-FTBGA package and the required commercial temperature grade.
Does the XC3S200A-5FTG256C support LVDS and other differential I/O standards?
The Spartan-3A family supports a broad set of single-ended and differential I/O standards, and the device documentation specifically identifies TMDS, PPDS, and SSTL3 Class I and II support. These resources suit high-speed links, display interfaces, and board-to-board communication when the bank voltage, VCCO, signal amplitude, and board-level impedance rules are satisfied. Use the DS529 I/O specification tables to confirm the exact standard and performance for each assigned ball.
What design constraints matter when laying out the 256-FTBGA footprint?
The 256-FTBGA layout requires a land pattern that matches the FTG256 package drawing, including ball orientation and thermal-via treatment. Decoupling, power-plane segmentation, configuration-data routing, clock integrity, and high-speed differential pairs all influence reliability and performance. Keep the configuration interface traces short and follow AMD guidance for supply connections and thermal vias. The 17 x 17 mm body leaves little routing margin, so complete pin assignment and layer planning before layout.
Are there programming and tool-compatibility considerations for XC3S200A-5FTG256C?
The XC3S200A-5FTG256C belongs to the Spartan-3A generation and is programmed with a configuration bitstream generated for its architecture and package. Legacy projects therefore depend on the appropriate Xilinx/AMD FPGA design tool version, device support files, and configuration memory interface. Confirm tool, cable, and PROM or processor compatibility before investing in board changes. Because the device is an older architecture, preserving a tested toolchain is often more reliable than moving the design to an unrelated newer device family.

داده‌های مرجع مهندسی برای XC3S200A-5FTG256C — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the XC3S200A-5FTG256C for a commercial-temperature Spartan-3A design that needs the higher -5 speed grade and has been assigned the FTG256 footprint. Select the XC3S200A-4FTG256C when the same logic, memory, and I/O resources are sufficient but the lower speed grade provides adequate timing margin. Choose the XC3S200A-4FTG256I when industrial-temperature operation is more important than maximum speed. Evaluate the XC3S200AN variants when Spartan-3AN-specific features or an alternate 256-ball ordering are useful, but verify exact ball assignments and configuration requirements before substitution. The XC3S200-5FTG256C is the least direct option because it belongs to Spartan-3 and provides fewer I/Os and RAM bits. For every replacement, rerun synthesis, timing closure, pin constraints, and board-level signal-integrity checks.

مقایسه با جایگزین‌ها

پارامتر این محصول XC3S200A-4FTG256C XC3S200A-4FTG256I XC3S200AN-5FT256C XC3S200AN-4FTG256I XC3S200-5FTG256C
Brand AMD Xilinx AMD Xilinx AMD Xilinx AMD Xilinx AMD Xilinx AMD Xilinx
Package 256-FTBGA (17 x 17 mm) 256-FTBGA (17 x 17 mm) 256-FTBGA (17 x 17 mm) 256-FTBGA (17 x 17 mm) 256-FTBGA (17 x 17 mm) 256-FTBGA (17 x 17 mm)
FPGA Family Spartan-3A Spartan-3A Spartan-3A Spartan-3AN Spartan-3AN Spartan-3
Logic Cells 4032 cells 4032 cells 4032 cells 4032 cells 4032 cells 4320 cells
RAM Bits 294912 bits 294912 bits 294912 bits 294912 bits 294912 bits 221184 bits
User I/O 195 I/Os 195 I/Os 195 I/Os 195 I/Os 195 I/Os 173 I/Os
Speed Grade -5 -4 -4 -5 -4 -5
Temperature Grade Commercial Commercial Industrial Commercial Industrial Commercial
Process Technology 90 nm 90 nm 90 nm 90 nm 90 nm 90 nm

تفاوت‌های کلیدی

  • Higher -5 speed grade within the directly related Spartan-3A options (در مقابلXC3S200A-4FTG256C)
  • Commercial temperature selection for controlled environments (در مقابلXC3S200A-4FTG256I)
  • Exact Spartan-3A resource and package continuity for legacy boards (در مقابلXC3S200-5FTG256C)

یادداشت‌های طراحی

Treat the 256-FTBGA as a fine-pitch routing problem rather than a conventional perimeter package. Assign every ball before layout, partition the design into functional I/O banks, and preserve the AMD FTG256 package orientation. Place configuration, clock, and high-fanout routing early because relocating a BGA escape after routing is expensive. Confirm the land pattern, solder-mask definition, and assembly process with the PCB fabricator rather than deriving dimensions from a generic BGA drawing.

The 17 x 17 mm FTG256 package has a limited thermal escape path, so the exposed package area and its thermal vias must be connected to a solid plane according to the AMD package guidance. Estimated: at 25 °C ambient, each additional 1 W of device dissipation raises junction temperature by approximately 40 °C if the effective junction-to-ambient resistance is 40 °C/W; this is an illustrative estimate, not a datasheet rating. Use the AMD power estimator for the actual design and avoid relying on the illustrative value for release decisions.

Keep clock, configuration, and high-speed differential nets away from noisy switching nodes, and preserve the return path beneath each high-speed pair. Place decoupling capacitance at the package power balls and keep the configuration interface away from high-slew-rate outputs. The family supports differential and high-speed standards such as SSTL3 and TMDS, so use the DS529 I/O tables to select bank VCCO values and follow the specified input, output, and termination requirements.

Do not substitute the part solely because another device uses a 256-ball package. Compare exact ball names, power-ball locations, configuration pins, VCCO assignments, speed grade, and temperature grade. The Spartan-3A and Spartan-3AN families share a 4032-cell resource level, while the Spartan-3 comparison device has 4320 cells, 221,184 RAM bits, and 173 I/Os. Re-run synthesis, placement, timing analysis, and pin constraint validation after any substitution.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The related Spartan-3AN comparison lists the device as RoHS compliant. Reach, halogen-free, conflict-minerals, and AEC-Q100 status are not stated for this order code.

تاریخ تأیید داده‌ها: 2026-11-20 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

xc3s200a datasheet xc3s200a 4vqg100c xc3s200a 4ftg256c xc3s200a 4vqg100i spartan xc3s200a xilinx xc3s200a XC3S200A-5FTG256C datasheet pdf XC3S200A-5FTG256C pinout XC3S200A-5FTG256C equivalent XC3S200A-5FTG256C replacement XC3S200A-5FTG256C price XC3S200A-5FTG256C stock XC3S200A-5FTG256C FTG256 footprint XC3S200A-5FTG256C vs XC3S200A-4FTG256C XC3S200A application circuit

قطعات و اصطلاحات مرتبط

AMD Xilinx XC3S200A-5FTG256C XC3S200A-4FTG256C XC3S200A-4FTG256I XC3S200AN-5FT256C XC3S200AN-4FTG256I XC3S200-5FTG256C Spartan-3A FPGA Spartan-3AN FPGA field-programmable gate array FPGA configurable logic block CLB logic cell block RAM 90 nm process technology 256-FTBGA package surface-mount device RoHS TMDS PPDS SSTL3 industrial control telecommunications equipment
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ