XC4VFX60-12FFG1152C - 56,880-Cell FPGA | AMD | Industrial
MPN: XC4VFX60-12FFG1152C ✗ پایان تولیدXC4VFX60-12FFG1152C نمای کلی
An FPGA is a programmable semiconductor containing configurable logic, memory, and input/output resources. After manufacture, engineers can load a bitstream to implement digital control, signal processing, communications, or interface logic. The Virtex-4 FX family belongs to the broader FPGA and CPLD product hierarchy, combining programmable logic blocks with dedicated processing and connectivity resources for complex embedded systems rather than fixed-function logic.
The XC4VFX60-12FFG1152C provides 6,320 logic blocks, 56,880 logic cells, 4276224 gate equivalents, and 576 I/O in the listed 1152-ball FCBGA configuration. Its 1181 MHz internal frequency supports demanding clocking and logic-routing requirements, while the -12 speed grade favors maximum performance over lower-speed alternatives. The commercial temperature range of 0°C to 85°C suits equipment intended for controlled industrial environments.
The device combines programmable logic with integrated DSP, block RAM, clocking, and selectable I/O resources characteristic of the Virtex-4 FX platform. This allows multiple fixed-function functions to be consolidated into one device, reducing the number of supporting components when a design requires parallel data paths, high-speed interfaces, or sophisticated control logic. The large 1152-ball package also supports extensive pin access compared with smaller FPGA packages.
Typical uses include industrial automation and control, telecommunications, networking equipment, test and measurement systems, embedded signal processing, and high-speed digital interface designs. The 576 available I/O make the device especially relevant to systems requiring numerous external connections or parallel buses. Designs must still account for supported voltage standards, board-level power integrity, signal conditioning, and thermal behavior during sustained operation.
A critical implementation concern is package-level signal integrity. The 1152-ball FCBGA requires exact ball-map alignment, controlled impedance routing, and careful power-plane distribution. Differential interfaces should be routed with matched geometry, while clocks and high-speed data paths should be kept away from noisy switching nodes. The manufacturer datasheet should be used for supported I/O standards, pin constraints, configuration requirements, and electrical characteristics.
This product page combines the exact device identity, core capacity, speed-grade information, package details, practical design guidance, and carefully qualified replacement options. It is intended to help engineers distinguish genuine same-footprint alternatives from devices with similar specifications but different package or electrical behavior.
جایگزینهای drop-in برای XC4VFX60-12FFG1152C — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای XC4VFX60-12FFG1152C (همان فرمفاکتور و فوتپرینت) — متفاوت در Device Type, Internal Frequency, Logic Family, Operating Temperature, Package Type.
XC4VFX60-10FFG1152C
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC4VFX60-11FF1152C
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC4VFX60-12FF1152C
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XC4VFX60-12FFG1152CS1
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XC4VFX60-11FFG1152C
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XC4VFX60-12FFG1152C حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Virtex-4 FX Field-Programmable Gate Array (FPGA) |
| Logic Cells | 56,880 cells |
| Logic Blocks | 6320 blocks |
| Gate Equivalents | 4276224 gates |
| Input/Output Count | 576 I/O |
| Internal Frequency | 1181 MHz |
| Speed Grade | -12 |
| Process Technology | 90 nm CMOS |
| ولتاژ تغذیه | 1.2 V |
| Package Type | 1152-ball FCBGA |
| Ball Count | 1152 balls |
| تعداد پایه | 1152 pins |
| دمای کاری | 0°C to 85°C |
| Logic Family | CMOS |
| Lead-Free Status | Lead-free |
راهنمای پیکربندی پین XC4VFX60-12FFG1152C 1152-ball fcbga
پیکربندی پین برای XC4VFX60-12FFG1152C (پکیج 1152-ball fcbga). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XC4VFX60-12FFG1152C.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XC4VFX60-12FFG1152C مناسب است برای 6 کاربردs: Industrial Automation Controllers, Telecommunications Data Paths, Network Interface Equipment, Test and Measurement Instruments, High-Speed Signal Processing, Embedded Control and Interface Consolidation.
Industrial Automation Controllers
The XC4VFX60-12FFG1152C fits industrial automation controllers that need extensive programmable logic and external connectivity. Its 6320 logic blocks and 56880 logic cells can support parallel control logic, machine-state machines, and communication coordination, while 576 I/O provide substantial board-level integration. The -12 grade is appropriate when the controller must close timing with additional margin. Use the device between sensor or actuator interfaces and the control fabric, and validate every I/O standard against the manufacturer ball map. The 0°C to 85°C range supports controlled commercial equipment, although enclosure temperature, power integrity, and long-term component availability must also be addressed.
پیشنهادی
Telecommunications Data Paths
The XC4VFX60-12FFG1152C is suitable for telecommunications data-path equipment requiring parallel programmable logic and a high I/O count. Its 1181 MHz internal-frequency listing and -12 performance grade support timing-sensitive routing, framing, and interface coordination across 6320 logic blocks. The 576 I/O can reduce the need for external interface components when the system uses multiple buses or parallel links. Designers should separate clocks from high-speed data routing, maintain controlled-impedance interconnects, and use the manufacturer I/O specifications to confirm voltage and slew-rate support. Production deployment also requires long-term supply planning because the Virtex-4 platform is no longer active.
پیشنهادی
Network Interface Equipment
The XC4VFX60-12FFG1152C can support network-interface equipment where protocol handling, packet control, and multiple external interfaces coexist in one programmable device. The FPGA fabric provides 56880 logic cells and 6320 logic blocks for parallel logic, while the 576 available I/O allow dense connectivity to transceivers, memories, and status interfaces. The 1152-ball FCBGA offers extensive routing options but demands careful ball-grid-layout execution. Engineers should budget simultaneous-switching-noise margin, distribute multiple supply rails according to the manufacturer guidance, and isolate sensitive clock paths. Static timing analysis must include realistic clock uncertainty and loading rather than relying only on the nominal internal frequency.
پیشنهادی
Test and Measurement Instruments
The XC4VFX60-12FFG1152C is appropriate for test and measurement instruments that combine acquisition control, timing logic, data formatting, and instrument communication. Its 1181 MHz internal-frequency listing and high-performance -12 grade can support demanding control paths, while 6320 logic blocks and 576 I/O provide resources for parallel channels and peripheral interfaces. The commercial temperature range fits controlled laboratory or industrial test equipment. A practical implementation should isolate analog sections from the FPGA, use the manufacturer ball map for bank-specific assignments, and validate every high-speed interface with suitable test equipment. Legacy inventory planning and configuration-file reproducibility should be addressed before production use.
پیشنهادی
High-Speed Signal Processing
The XC4VFX60-12FFG1152C is well matched to parallel signal-processing and digital-filter implementations that benefit from configurable logic and substantial I/O. The 56880-cell fabric can execute multiple concurrent datapaths, while the 1152-ball package exposes enough connections for high-speed memory, converters, and sampling interfaces. Its -12 grade provides the highest documented performance option in the -10 through -12 Virtex-4 range. Design closure should use pipelining appropriate to the -12 timing limits, preserve clock integrity through controlled impedance, and include worst-case power and temperature analysis. Confirm the exact supported clocking resources and DSP implementation details in the manufacturer documentation before schematic release.
پیشنهادی
Embedded Control and Interface Consolidation
The XC4VFX60-12FFG1152C can consolidate embedded control and interface functions that would otherwise require several programmable devices. Its 6320 logic blocks, 576 I/O, and 1181 MHz internal-frequency listing support complex state logic, peripheral bridges, and parallel data movement within one FPGA. The FCBGA package offers broad connectivity, although its fine-pitch ball array requires advanced PCB assembly capability and careful power-plane design. Engineers should establish a pin-assignment process using the exact package ball map, preserve configuration access, and plan programming and recovery mechanisms. Because this is a legacy platform, verify the availability of suitable configuration memories, documentation, and engineering support.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XC4VFX60-12FFG1152C — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XC4VFX60-10FFG1152C | XC4VFX60-11FF1152C | XC4VFX60-12FF1152C | XC4VFX60-12FFG1152CS1 |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 1152-ball FCBGA | 1152-ball FCBGA | 1152-ball FCBGA | 1152-ball FCBGA | 1152-ball FCBGA |
| Speed Grade | -12 | -10 | -11 | -12 | -12 |
| Logic Blocks | 6320 blocks | 6320 blocks | 6320 blocks | 6320 blocks | 6320 blocks |
| Logic Cells | 56880 cells | 56880 cells | 56880 cells | 56880 cells | 56880 cells |
| Input/Output Count | 576 I/O | 576 I/O | 576 I/O | 576 I/O | 576 I/O |
| Internal Frequency | 1181 MHz | 1181 MHz | 1181 MHz | 1181 MHz | 1181 MHz |
| Logic Family | CMOS | CMOS | CMOS | CMOS | CMOS |
| Process Technology | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
| Operating Temperature | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C |
تفاوتهای کلیدی
- Highest Virtex-4 performance grade in the documented -10, -11, and -12 range (در مقابلXC4VFX60-10FFG1152C)
- Same core capacity with a one-grade performance step for timing flexibility (در مقابلXC4VFX60-11FF1152C)
- Original FFG ordering configuration at the -12 performance grade (در مقابلXC4VFX60-12FF1152C)
- Same -12 device with an S1 ordering suffix (در مقابلXC4VFX60-12FFG1152CS1)
یادداشتهای طراحی
Treat the 1152-ball FCBGA as a fine-pitch BGA design rather than a conventional leaded package. Assign signals from the exact manufacturer ball map, preserve all dedicated configuration and power balls, and route high-speed differential pairs with matched length and geometry. Confirm the PCB stack-up, via strategy, solder-mask and paste design, and assembly process against the package drawing before fabrication.
Design each voltage rail around the manufacturer's recommended decoupling and power-distribution requirements, including the stated 1.2 V supply architecture. Place the required ceramic capacitors at their prescribed package locations, provide adequate via connections at power and ground balls, and keep switching-current loops compact. Validate voltage tolerance, startup sequencing, and rail droop using worst-case I/O activity rather than an unloaded condition.
Use the -12 speed-grade timing constraints during implementation rather than relying on the nominal 1181 MHz internal-frequency figure. Route clocks as short, continuous paths, avoid stubs and unnecessary layer transitions, and provide controlled-impedance connections for external interfaces. After PCB fabrication, verify clock jitter, edge quality, and high-speed eye behavior across voltage and temperature because logic timing alone does not establish complete signal integrity.
Do not substitute a device solely because its MPN contains the same die, cell-count, and 1152 identifiers. Check the speed grade, package suffix, temperature grade, ball map, supported I/O standards, and configuration interface. In particular, F and FFG order codes must be reconciled with the approved package drawing and purchasing specification before a drop-in substitution is authorized.
اطلاعات انطباق
The exact MPN is identified as lead-free in device comparison information. RoHS, REACH, halogen-free, and conflict-minerals declarations were not established for the exact MPN and remain unknown.