XC7Z030-2FFG676I - Dual Cortex-A9 Zynq SoC | AMD
MPN: XC7Z030-2FFG676I ✓ فعالXC7Z030-2FFG676I نمای کلی
A Zynq SoC is a heterogeneous system-on-chip that combines an Arm processing system, programmable logic, memory controllers, and fixed-function peripherals. The processing subsystem executes operating systems, control software, and network applications, while the FPGA fabric implements parallel datapaths, custom interfaces, signal processing, and hardware acceleration. This architecture offers more flexibility than a fixed ASIC while reducing the component count associated with separate processors and FPGAs.
The XC7Z030 device provides 125K programmable logic cells and an 800 MHz dual-core Arm Cortex-A9 configuration. Its programmable fabric supports parallel data processing and custom peripheral functions, while the ARM subsystem handles sequential software tasks. CoreSight debug capabilities support development workflows that combine instruction-level tracing, hardware visibility, and programmable-logic debugging. The -2 speed designation and industrial-temperature suffix organize the device for design planning, although detailed operating limits must be checked in the AMD data sheet.
The 676-FCBGA package provides 676 electrical contacts and exposes the SoC's high-performance interfaces. Because this is a complex mixed-signal and high-speed programmable package, PCB construction, power planning, decoupling, and ball-escape routing are critical. Designers should follow the AMD package pinout, design guidelines, and power-estimation guidance rather than treating the BGA as a generic land pattern. Differential clocks, high-speed memory interfaces, and MGT transceivers require especially careful return-path and reference-plane design.
Typical uses include industrial control, industrial networking, machine vision, video processing, communications equipment, embedded Linux systems, and sensor-processing platforms. The dual-core processor is suitable for an operating system and real-time tasks, while FPGA logic can accelerate filtering, protocol handling, image pre-processing, or custom interfaces. External DDR memory, nonvolatile storage, clock sources, transceivers, and power regulators are normally required around the SoC.
The primary design trade-off is integration against implementation effort. Consolidating processor and FPGA functions reduces board-level interconnects and can simplify system partitioning, but firmware, HDL, interconnect constraints, and BGA layout must be planned together. Verify power sequencing, decoupling, memory topology, and transceiver requirements early because corrections are substantially harder after routing.
This page combines the exact device identity, package characteristics, engineering application guidance, comparison parameters, and verified drop-in candidates. It also identifies compatibility questions that require confirmation against the AMD data sheet and package-placement diagram before any redesign is approved.
جایگزینهای drop-in برای XC7Z030-2FFG676I — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای XC7Z030-2FFG676I (همان فرمفاکتور و فوتپرینت) — متفاوت در Device Type, Programmable Logic, Mounting Type, Package, Package Type.
XC7Z030-2FBG676I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC7Z030-1FFG676I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC7Z030-2FFG676E
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC7Z030-3FFG676E
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC7Z030-1FBG676C
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC7Z030-2FFG676I حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | Zynq-7000 system-on-chip with dual-core Arm Cortex-A9 and Kintex-7 FPGA |
| Processing Architecture | Dual-core Arm Cortex-A9 MPCore |
| Processor Frequency | 800 MHz |
| FPGA Logic Cells | 125K logic cells |
| FPGA Family | Kintex-7 |
| SoC Family | Zynq-7000 |
| Programmable Logic Type | FPGA |
| Debug Support | CoreSight |
| بستهبندی | 676-FCBGA |
| Package Ball Count | 676 balls |
| Package Dimensions | 27 x 27 mm |
| نوع نصب | Surface-mount BGA |
| وضعیت RoHS | Compliant |
| REACH Status | Unknown |
راهنمای پیکربندی پین XC7Z030-2FFG676I 27 x 27 mm
پیکربندی پین برای XC7Z030-2FFG676I (پکیج 27 x 27 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XC7Z030-2FFG676I.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XC7Z030-2FFG676I مناسب است برای 6 کاربردs: Industrial Control Systems, Machine Vision Processing, Industrial Networking Gateways, Embedded Linux Edge Systems, Video and Image Acceleration, Sensor Fusion and Signal Processing.
Industrial Control Systems
The XC7Z030-2FFG676I fits industrial controllers that divide real-time I/O and signal processing between programmable logic and the dual-core 800 MHz Arm Cortex-A9 subsystem. The 125K logic cells can execute parallel control loops, condition sensors, or manage custom interfaces, while the processor subsystem runs operating-system software and supervisory logic. Placing both functions in one 676-FCBGA device reduces inter-board communication compared with separate processor and FPGA implementations. The design must account for deterministic memory behavior, isolated power rails, industrial temperature requirements, and the AMD-specified BGA layout rules.
پیشنهادی
Machine Vision Processing
The XC7Z030-2FFG676I can divide machine-vision workloads between its 800 MHz Arm Cortex-A9 cores and 125K FPGA logic cells. The FPGA fabric is suitable for parallel pixel pre-processing, thresholding, and data reduction, while the processor handles control flow, image orchestration, networking, and user interfaces. This division reduces transfers of intermediate image data compared with processing every stage in software. Practical implementations require DDR memory with sufficient bandwidth, careful clock routing, and a PCB layout that preserves signal integrity for memory and programmable interfaces.
پیشنهادی
Industrial Networking Gateways
The XC7Z030-2FFG676I suits network gateways requiring Linux or real-time software alongside customizable packet handling. The dual-core 800 MHz Arm subsystem can manage protocol stacks, management services, and secure connectivity, while FPGA logic can accelerate framing, filtering, compression, or interface conversion. Integrating these workloads into a 676-FCBGA Zynq device can reduce connector count and system size. The implementation should partition latency-sensitive operations into fixed-latency logic, reserve processor resources for control functions, and validate all external interfaces against the AMD timing and power guidelines.
پیشنهادی
Embedded Linux Edge Systems
The XC7Z030-2FFG676I combines a dual-core 800 MHz Arm processing system with programmable FPGA resources for compact embedded Linux edge platforms. Linux can supervise networking, storage, configuration, and application workloads, while FPGA logic accelerates sensing, video, cryptography, or proprietary protocols. The 125K logic-cell fabric allows hardware-specific functions to remain in the same device as the operating system. Deployment decisions should include boot-media support, DDR topology, watchdog behavior, thermal design, and the availability of the exact industrial-temperature ordering code.
پیشنهادی
Video and Image Acceleration
The XC7Z030-2FFG676I is appropriate for video systems that require programmable throughput without relying exclusively on a CPU. The 125K Kintex-7 FPGA fabric can implement parallel pixel pipelines, color conversion, scaling, or frame pre-processing, while the 800 MHz dual-core Arm subsystem performs configuration, buffering management, and application-level control. This architecture is useful in industrial cameras, inspection equipment, and display-processing modules. Engineering validation should focus on memory bandwidth, video-clock integrity, deterministic pipeline latency, and power consumption under sustained frame rates.
پیشنهادی
Sensor Fusion and Signal Processing
The XC7Z030-2FFG676I supports sensor-fusion systems in which programmable logic handles deterministic acquisition and filtering while the Arm cores perform calibration, classification, and communications. Parallel datapaths in the 125K logic-cell fabric can process multiple sensor channels concurrently, and the dual-core processor provides separate execution domains for acquisition control and higher-level logic. The SoC architecture avoids communication between a discrete processor and FPGA. The design must define clock-domain boundaries, buffer ownership, calibration interfaces, and power domains before assigning tasks across hardware and software.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XC7Z030-2FFG676I — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XC7Z030-2FBG676I | XC7Z030-1FFG676I | XC7Z030-2FFG676E | XC7Z030-3FFG676E | XC7Z030-1FBG676C |
|---|---|---|---|---|---|---|
| Package | 676-FCBGA (27 x 27 mm) | 676-FCBGA package family | 676-FCBGA (27 x 27 mm) | 676-FCBGA package family | 676-FCBGA package family | 676-FCBGA package family |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| SoC Family | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 |
| Speed Designation | -2 | -2 | -1 | -2 | -3 | -1 |
| Temperature Suffix | I | I | I | E | E | C |
تفاوتهای کلیدی
- Closest same-speed package-family candidate (در مقابلXC7Z030-2FBG676I)
- Higher speed designation than the -1 FFG option (در مقابلXC7Z030-1FFG676I)
- Industrial suffix retained (در مقابلXC7Z030-2FFG676E)
- Closer speed grade than the -3 FFG option (در مقابلXC7Z030-3FFG676E)
یادداشتهای طراحی
Treat the 676-FCBGA layout as a complete high-speed design rather than a generic BGA escape exercise. Follow AMD's package-placement diagram, ball assignments, reference-plane rules, and recommended stack-up for the exact XC7Z30 FBG676/FFG676 family. Keep the programmable-logic, processor, memory, clock, and power connections routed according to their respective interface classes. A mechanically valid footprint does not by itself guarantee a functioning Zynq system.
Estimate processor, programmable-logic, I/O, DDR, and transceiver power separately before choosing regulators and copper area. The dual-core 800 MHz Arm subsystem and 125K logic-cell fabric can create dynamic demand that differs substantially from idle consumption. Follow AMD's power-estimation methodology, include worst-case utilization and temperature conditions, and verify regulator transient response against the selected DDR interface and load profile. Do not rely on a single nominal rail value.
Map every clock, memory, serial transceiver, and other high-speed interface into a controlled clock or data domain before assigning pins. Preserve continuous return paths beneath high-speed traces, observe AMD's spacing and via rules, and validate the selected stack-up with simulation or measurement. The 800 MHz processor rating does not imply that external DDR or serial links can be routed by convention; their individual timing and signal-integrity constraints must be checked separately.
The suffix carries meaningful orderable differences: -2 versus -1 or -3 changes the speed grade, while I, E, and C identify different temperature grades. XC7Z030-2FBG676I is the closest same-speed candidate, but FBG and FFG codes still require confirmation against AMD's placement material. Before approving any listed alternative, check the exact ball map, temperature limits, timing tables, power characteristics, software-device identification, and bitstream support.
اطلاعات انطباق
RoHS compliance is identified for the Zynq-7000 device family. The package-placement documentation covers XC7Z30 FBG676/FFG676 devices. No AEC-Q100 qualification, halogen-free declaration, or conflict-minerals statement is established for this exact ordering code.