XC9536XL-7PCG44C - 36-Macrocell 3.3V CPLD | Xilinx
MPN: XC9536XL-7PCG44C ✗ پایان تولیدXC9536XL-7PCG44C نمای کلی
A CPLD, or Complex Programmable Logic Device, is a programmable-logic semiconductor that combines interconnected macrocells, embedded Flash memory, and programmable interconnect resources. It belongs to the logic hierarchy that includes programmable logic devices, FPGA and CPLD devices, and general-purpose semiconductors. Unlike a fixed-function application-specific integrated circuit, a CPLD can be reprogrammed to implement several hardware configurations while retaining nonvolatile configuration memory.
The XC9536XL architecture provides two 54V18 function blocks and 34 user I/O pins. Its in-system programming capability supports at least 10,000 program and erase cycles according to the product specification. A 200 MHz internal-frequency figure is also listed for this exact device. These characteristics make the part useful for compact controllers, peripheral adapters, industrial control logic, and legacy systems that need deterministic combinational and registered logic.
The XC9500XL family architecture supports advanced in-system programming and test functions. The XC9536XL variant combines two high-performance function blocks with 800 usable gates, while the -7 suffix identifies its speed class. A maximum 7.5 ns propagation delay is important when designing timing closures around address decoding, control sequencing, and handshake logic. The device operates from a 3 V to 3.6 V internal supply, matching the listed 3.3 V operating class.
Typical applications include industrial equipment control, communication-interface conditioning, data-acquisition modules, embedded peripheral bridging, and legacy control-system refreshes. In each case, the 36 available macrocells can be assigned to Boolean equations, counters, state machines, address decoding, and programmable interface functions. The 34 user I/O pins provide enough external connectivity for systems requiring moderate pin density rather than a large FPGA.
Designers should preserve the PLCC footprint and verify signal standards, supply voltage, I/O limits, and timing before replacing an existing XC9536XL assembly. The nonvolatile ISP architecture simplifies field updates, but programming tools and the device configuration file remain part of the design dependency. Because this orderable variant is marked obsolete, an existing supported design should normally remain on the exact MPN rather than substitute a speed or temperature-grade variant without timing review.
This page combines the verified device specifications, package information, lifecycle status, pinout availability, drop-in family variants, and practical design guidance. It also provides application-focused engineering context and a parameter comparison to help engineers assess whether the obsolete XC9536XL-7PCG44C still matches the electrical and mechanical requirements of an existing design.
جایگزینهای drop-in برای XC9536XL-7PCG44C — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای XC9536XL-7PCG44C (همان فرمفاکتور و فوتپرینت) — متفاوت در Device Type, Function Block Architecture, Lead-Free Status, Package Type, Programmable Type.
XC9536XL-7PC44I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC9536XL-7PCG44I
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC9536XL-5PCG44C
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XC9536XL-5PCG44I
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC9536XL-7PCG44C حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | In-system-programmable Flash CPLD |
| Series | XC9500XL |
| Internal Supply Voltage | 3 V to 3.6 V |
| Number of Macrocells | 36 macrocells |
| Number of User I/O Pins | 34 I/O pins |
| Number of Function Blocks | 2 function blocks |
| Function Block Architecture | 54V18 architecture |
| Usable Gates | 800 gates |
| Maximum Propagation Delay | 7.5 ns |
| Listed Internal Frequency | 200 MHz |
| Programmable Type | In-system programmable Flash |
| Program and Erase Endurance | At least 10,000 cycles |
| Logic Family | CMOS |
| Package Type | 44-pin PLCC, LCC-44 |
| Total Pin Count | 44 pins |
| نوع نصب | Surface mount |
| وضعیت RoHS | RoHS compliant |
| Lead-Free Status | Lead free |
راهنمای پیکربندی پین XC9536XL-7PCG44C 44-pin plcc, lcc-44
پیکربندی پین برای XC9536XL-7PCG44C (پکیج 44-pin plcc, lcc-44). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XC9536XL-7PCG44C.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XC9536XL-7PCG44C مناسب است برای 6 کاربردs: Industrial Equipment Control, Communication Interface Conditioning, Data-Acquisition Signal Conditioning, Embedded Peripheral Bridging, Programmable Test and Measurement Logic, Legacy Platform Consolidation.
Industrial Equipment Control
The XC9536XL-7PCG44C fits legacy industrial controller boards that need compact, nonvolatile programmable logic beside a host processor. Its 36 macrocells can implement relay and actuator sequencing, interlocks, alarms, state machines, and status decoding without consuming additional discrete logic packages. The 34 user I/O pins support typical industrial interfaces such as discrete inputs, relay outputs, and buffered status signals. In-system programming allows controlled configuration updates without removing the device, although the obsolete lifecycle status makes a new design dependent on careful supply assessment. For maintenance, preserve the existing PLCC footprint and verify that 3.3 V operation, I/O levels, and the 7.5 ns timing class satisfy the original controller timing.
پیشنهادی
Communication Interface Conditioning
The XC9536XL-7PCG44C can support legacy communication equipment by implementing protocol framing, command decoding, ready and valid handshakes, and interface timing functions around a host processor. Its two 54V18 function blocks and 800 usable gates provide enough logic for multiple interface state machines while retaining a compact 44-pin PLCC footprint. The 7.5 ns maximum listed propagation delay is useful for short combinational paths and registered control logic. Because the device is not a high-speed transceiver, external line drivers and protocol-specific physical layers remain necessary. Engineers should establish the board’s logic thresholds and signal timing before using it between older parallel buses and newer serial-interface controllers, then validate every pin assignment against the family pin-description table.
پیشنهادی
Data-Acquisition Signal Conditioning
The XC9536XL-7PCG44C is suitable for coordinating acquisition and conversion modules that require latch logic, channel selection, trigger routing, and status flags close to external components. Its 36 macrocells can implement counters, sample sequencing, and interface decoding, while the 34 user I/O pins accommodate typical parallel converter and sensor interfaces. The device does not perform analog conversion itself, so precision signal conditioning remains outside the CPLD. Its 3.3 V supply range can simplify integration with modern mixed-signal components, provided all attached devices use compatible logic thresholds. For a service replacement, check setup and hold timing, control-signal polarity, and whether the original board relies on a particular power-up configuration stored in nonvolatile Flash.
پیشنهادی
Embedded Peripheral Bridging
The XC9536XL-7PCG44C can bridge mismatched peripheral interfaces in an embedded system by translating address regions, qualifying asynchronous control signals, and coordinating data flow between a host bus and dedicated controllers. Two function blocks with 800 usable gates are sufficient for moderate glue-logic networks, while in-system programming supports repeatable updates. A practical design would divide the 34 user I/O pins among the host interface, target peripheral, interrupt handling, and shared status signals. The 7.5 ns maximum propagation delay must be included in the interface timing budget, particularly for write strobes and address decode paths. This use is primarily appropriate for maintaining or cloning older equipment because the exact orderable device is obsolete and programming-tool continuity should be confirmed before production use.
پیشنهادی
Programmable Test and Measurement Logic
The XC9536XL-7PCG44C can implement deterministic fixture-control logic for test and measurement equipment, including instrument selection, trigger routing, limit comparison, and pass or fail sequencing. The 36 macrocells allow reusable control functions to be consolidated into one programmable package, and the 34 user I/O pins can connect to test points or relay drivers. Its nonvolatile in-system configuration is useful when a fixture must be reprogrammed for different board variants. Timing-sensitive instrumentation paths should use registered functions and account for the 7.5 ns maximum listed propagation delay. The part is obsolete, so it is best treated as a maintenance solution for existing fixtures rather than the foundation of a new platform, with I/O voltage and programming compatibility verified first.
پیشنهادی
Legacy Platform Consolidation
The XC9536XL-7PCG44C is useful when consolidating several small fixed-logic devices in a legacy platform because 36 macrocells can replace multiple gates, counters, decoders, and flip-flop packages. Its 44-pin PLCC package and 34 user I/O pins provide a straightforward board-level replacement strategy for existing 44-pin layouts. The 3 V to 3.6 V operating range suits 3.3 V systems, but all mixed-voltage interfaces must be checked carefully. In-system programming provides a convenient path for configuring different board revisions without changing the permanent logic design. Because the device is obsolete, engineers should preserve the exact MPN for faithful maintenance, archive its configuration file and programming procedure, and avoid assuming that a faster same-family speed grade preserves every legacy timing or qualification condition.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XC9536XL-7PCG44C — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XC9536XL-7PC44I | XC9536XL-7PCG44I | XC9536XL-5PCG44C | XC9536XL-5PC44I | XC9536XL-5PCG44I |
|---|---|---|---|---|---|---|
| Package | 44-pin PLCC | 44-pin PLCC | 44-pin PLCC | 44-pin PLCC | 44-pin PLCC | 44-pin PLCC |
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Speed Grade | -7, 7.5 ns maximum propagation delay | -7, 7.5 ns maximum propagation delay | -7, 7.5 ns maximum propagation delay | -5, 5 ns nominal speed-grade delay | -5, 5 ns nominal speed-grade delay | -5, 5 ns nominal speed-grade delay |
| Macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells |
| User I/O Pins | 34 I/O pins | 34 I/O pins | 34 I/O pins | 34 I/O pins | 34 I/O pins | 34 I/O pins |
| Usable Gates | 800 gates | 800 gates | 800 gates | 800 gates | 800 gates | 800 gates |
| Internal Supply Voltage | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| Programmable Type | In-system-programmable Flash | In-system-programmable Flash | In-system-programmable Flash | In-system-programmable Flash | In-system-programmable Flash | In-system-programmable Flash |
تفاوتهای کلیدی
- Exact legacy configuration with a 7.5 ns maximum listed delay (در مقابلXC9536XL-5PCG44C)
- Direct same-footprint option for industrial-temperature qualification (در مقابلXC9536XL-7PC44I)
- Compact logic density for legacy control designs (در مقابلXC9536XL-7PCG44I)
یادداشتهای طراحی
Do not treat a shared 44-pin PLCC outline as proof of automatic interchangeability. Verify the exact pin-description table, supply pins, programming pins, I/O standards, and power-up behavior for every candidate. The XC9536XL-7PC44I retains the same speed class and footprint, but the I order code changes environmental qualification. A faster -5 speed grade also requires timing review even though its mechanical footprint matches.
Budget the 7.5 ns maximum listed propagation delay against address-decoder outputs, control strobes, and asynchronous handshake paths. Register signals whose external setup and hold requirements are tight, and avoid placing critical decode paths directly at slow board edges. For legacy buses, keep clocking, synchronization, and bus-turnaround sequencing explicit in the CPLD equations rather than relying on board delay.
Preserve the original PLCC land pattern, component orientation, solder-joint process, and pin-1 location when replacing this legacy device. Confirm that the replacement is a leaded PLCC package rather than a superficially similar 44-pin QFN or TQFP. Inspect sockets and pads for corrosion or thermal damage, and use a compatible desoldering profile to avoid lifting pads on this obsolete assembly.
Operate the device from its specified 3 V to 3.6 V internal supply range and verify every connected I/O threshold separately. The 3.3 V classification does not make mixed-voltage interfaces automatically safe. Check pull-up networks, bus drivers, programming-cable signals, and unused I/O states so that no external node can exceed the electrical limits of the selected XC9536XL order code.
Archive the original bitstream, constraint file, pin report, programming cable configuration, and device identifier before removing a working assembly. In-system programming does not eliminate tool-version or algorithm compatibility concerns, especially for an obsolete device. Validate a restored configuration on a known-good board and compare all external pin states during reset, configuration, and normal operation before reconnecting the target system.
اطلاعات انطباق
RoHS compliance and lead-free status are stated in the product specification. REACH, halogen-free, and conflict-minerals status are not stated.