XCKU035-3FFVA1156E - 20nm Kintex UltraScale FPGA | AMD
MPN: XCKU035-3FFVA1156E ✓ فعالXCKU035-3FFVA1156E نمای کلی
An FPGA is a programmable logic semiconductor whose lookup tables, registers, block RAM, digital signal processing resources, and I/O can be configured after manufacture. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices and sits between fixed-function logic ICs and software-driven processors. This combination makes the XCKU035 suitable when hardware parallelism, deterministic I/O, high-speed serial links, and reconfigurable interfaces are more important than minimizing silicon cost or power.
The Kintex UltraScale family is positioned between AMD's lower-cost UltraScale devices and higher-end Virtex devices. The XCKU035 provides 520 I/Os, substantial embedded memory, and high-speed signal-processing bandwidth in one device. Its 20 nm implementation supports demanding signal processing, communications, industrial imaging, test equipment, and high-speed data-acquisition systems where deterministic parallel processing is beneficial. The 1156-pin FCBGA also exposes a large number of general-purpose and high-speed interface connections.
The -3FFVA1156E ordering code separates device identity from implementation details. XCKU035 identifies the Kintex UltraScale device and its resource organization, -3 identifies the speed grade, FFVA identifies the package family, and 1156 identifies the ball count. The E suffix denotes the product's final orderable configuration. Designers should treat the FPGA configuration, power rails, pin constraints, and transceiver requirements as a matched set rather than treating the device as a conventional interchangeable IC.
Typical uses include 100G networking equipment, medical imaging, heterogeneous wireless infrastructure, industrial signal processing, and embedded test systems. For networking and wireless designs, its high-speed transceivers and broad I/O count support dense serial interfaces. For medical and industrial imaging, parallel programmable logic and DSP resources can accelerate filtering, compression, and data reduction. Programmable behavior also supports field updates and product differentiation without a board respin.
Board design requires careful separation of clean and noisy power rails, robust decoupling, length-aware routing for high-speed interfaces, and thermal analysis for sustained accelerator workloads. Follow the AMD package pinout files and UG575 when assigning balls, and validate every voltage, decoupling, and transceiver setting against the Kintex UltraScale data sheet. Configuration storage and programming connections should also be designed before the PCB layout is frozen.
This page consolidates the exact orderable part number, package and resource data, speed-grade alternatives, comparison parameters, sourcing information, and practical implementation guidance. It helps engineers narrow a large FPGA portfolio while preserving the electrical, mechanical, and programming constraints required for a successful Kintex UltraScale design.
جایگزینهای drop-in برای XCKU035-3FFVA1156E — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای XCKU035-3FFVA1156E (همان فرمفاکتور و فوتپرینت) — متفاوت در Package Type, Speed Grade.
XCKU035-1FFVA1156C
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XCKU035-2FFVA1156E
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XCKU035-2FFVA1156I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XCKU035-1FFVA1156I
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XCKU035-2FFVA1156I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XCKU035-3FFVA1156E حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | Kintex UltraScale field-programmable gate array (FPGA) |
| Manufacturer | AMD Xilinx |
| Logic Cells | 444,343 cells |
| Total RAM | 19,456,000 bits |
| User I/O Count | 520 I/Os |
| Process Technology | 20 nm |
| Device Family | Kintex UltraScale |
| Speed Grade | -3 |
| Core Supply Voltage | 0.95 V |
| بستهبندی | 1156-pin FCBGA |
| Package Type | Fine-Pitch Ball Grid Array (FCBGA) |
| نوع نصب | Surface mount |
| Programming Technology | User-programmable FPGA configuration |
| Transceiver Capability | High-speed transceivers |
| Packaging Form | Tray |
| وضعیت چرخه عمر | Active |
راهنمای پیکربندی پین XCKU035-3FFVA1156E fine-pitch ball grid array (fcbga)
پیکربندی پین برای XCKU035-3FFVA1156E (پکیج fine-pitch ball grid array (fcbga)). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XCKU035-3FFVA1156E.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XCKU035-3FFVA1156E مناسب است برای 6 کاربردs: 100G Networking Infrastructure, Medical Imaging and Diagnostics, Industrial Signal Processing, Wireless Communications Equipment, High-Speed Data Acquisition, Test and Measurement Equipment.
100G Networking Infrastructure
The XCKU035-3FFVA1156E fits high-throughput network equipment that must combine programmable packet processing with high-speed serial interfaces. Its 444,343 logic cells provide parallel capacity for switching, traffic management, framing, statistics, and protocol adaptation, while 19,456,000 RAM bits support buffering and lookup structures. The 520 I/Os provide additional board-level connectivity for clocks, controls, status signals, and parallel fabric interfaces. High-speed transceivers support dense serial links where board area and signal integrity are major constraints. Engineering teams should use Vivado timing analysis to confirm whether the -3 grade is required, and they should follow AMD's package, power, and transceiver implementation guidance before freezing the PCB layout.
پیشنهادی
Medical Imaging and Diagnostics
The XCKU035-3FFVA1156E is suitable for medical-imaging systems that accelerate acquisition, filtering, segmentation, and image-data movement in programmable hardware. The 444,343 logic cells can implement parallel pipeline logic, while 19,456,000 RAM bits provide working storage for line buffers and frame-processing stages. A 520-I/O device also supports parallel sensors, converters, clocks, and control interfaces. Because medical equipment may require deterministic behavior and carefully controlled clocking, engineers should partition acquisition, processing, and communication logic into verified Vivado constraints. The exact signal-chain performance, diagnostic claims, and system safety requirements must be evaluated through the end product's validation process rather than inferred solely from the FPGA specifications.
پیشنهادی
Industrial Signal Processing
The XCKU035-3FFVA1156E can support industrial measurement and control systems requiring deterministic parallel processing and extensive I/O. Its programmable logic resources can implement filters, digital conversions, timing algorithms, protocol bridges, and real-time control, while the 19,456,000 RAM bits support local buffering between acquisition and processing stages. The 20 nm Kintex UltraScale device also includes DSP and high-speed transceiver resources for connected signal paths. For factory equipment, designers should separate sensitive analog and clock domains from high-speed digital activity, use controlled clocking, and validate industrial temperature requirements against the exact orderable suffix. Vivado implementation and post-route timing analysis should confirm the final clock, I/O, and power performance.
پیشنهادی
Wireless Communications Equipment
The XCKU035-3FFVA1156E is appropriate for wireless infrastructure and heterogeneous radio systems that combine DSP, packet handling, and high-speed interfaces. Its 444,343 logic cells and DSP resources can support parallel filtering, modulation assistance, digital predistortion control, and protocol handling, while the 520 I/Os support parallel data paths and board-level management signals. High-speed transceivers reduce the amount of external interconnect for supported serial links. Layout planning must account for the device's power architecture, transceiver reference-clock requirements, package-ball assignments, and channel-length constraints. Engineers should use AMD's official 1156-pin package files and Kintex UltraScale design guidance, then run complete timing, power, and signal-integrity signoff for the intended radio platform.
پیشنهادی
High-Speed Data Acquisition
The XCKU035-3FFVA1156E is well suited to high-speed data-acquisition systems where parallel converters or high-rate serial links feed programmable processing logic. The 444,343 logic cells allow multiple acquisition channels to be filtered, formatted, and routed concurrently, while 19,456,000 RAM bits support buffering between fast converters and slower downstream storage. Its 520 I/Os can connect parallel data buses, triggers, clocks, and status signals. For deterministic results, the design must use low-skew clock distribution, defined input constraints, and careful separation between sensitive acquisition circuitry and digital switching activity. Validate converter interface timing in Vivado, implement the supported transceiver or parallel interface, and perform board-level signal-integrity testing before volume production.
پیشنهادی
Test and Measurement Equipment
The XCKU035-3FFVA1156E can implement complex test and measurement logic, including pattern generation, protocol analysis, timing control, real-time DSP, and data capture. Its 444,343 logic cells and 19,456,000 RAM bits support parallel channels and sizeable sample buffers, while the 520 I/Os provide extensive connectivity to converters, memory, clocks, and front-panel control logic. Programmable architecture also allows instrument features to be revised through FPGA bitstream updates. Timing-critical paths require disciplined clock planning, registered I/O interfaces, and implementation-level timing verification in Vivado. Use AMD's official package pinout files for every ball assignment and keep analog input sections physically separated from digital and transceiver activity to reduce coupling and measurement noise.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XCKU035-3FFVA1156E — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XCKU035-1FFVA1156C | XCKU035-2FFVA1156E | XCKU035-2FFVA1156I | XCKU035-1FFVA1156I |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 1156-pin FCBGA | 1156-pin FCBGA | 1156-pin FCBGA | 1156-pin FCBGA | 1156-pin FCBGA |
| Device Family | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale |
| Logic Cells | 444,343 cells | 444,343 cells | 444,343 cells | 444,343 cells | 444,343 cells |
| RAM Bits | 19,456,000 bits | 19,456,000 bits | 19,456,000 bits | 19,456,000 bits | 19,456,000 bits |
| User I/O Count | 520 I/Os | 520 I/Os | 520 I/Os | 520 I/Os | 520 I/Os |
| Speed Grade | -3 | -1 | -2 | -2 | -1 |
| Process Technology | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm |
تفاوتهای کلیدی
- Highest selected speed grade among the listed XCKU035 alternatives (در مقابلXCKU035-2FFVA1156E)
- Identical device resource organization (در مقابلXCKU035-1FFVA1156C)
- Same-device packaging option for grade-down sourcing (در مقابلXCKU035-2FFVA1156I)
- Large programmable resource base for parallel signal processing (در مقابلXCKU035-1FFVA1156I)
یادداشتهای طراحی
Design the power tree from the manufacturer's Kintex UltraScale specifications rather than treating all balls as one supply domain. Assign the exact required core, I/O, auxiliary, and transceiver rails, verify each rail's voltage and current limit in the data sheet, and place local high-frequency decoupling close to the associated device balls. Use a power-distribution topology that limits voltage drop across the 1156-pin FCBGA, then validate steady-state and transient behavior at the relevant processing activity.
The XCKU035-3FFVA1156E can consume substantial dynamic power under heavy logic, DSP, memory, or transceiver utilization. Complete a board-level thermal analysis for the -3 grade rather than relying on an average activity estimate. Preserve a continuous heat-transfer path through the package substrate and PCB, minimize thermal discontinuities around the device, and use Vivado power reporting to identify the implemented design's worst-case hotspots before defining enclosure airflow and ambient limits.
Use AMD's official UltraScale package pinout files for every FCBGA-ball assignment and verify them against the selected -3FFVA1156E device configuration. Keep power, ground, and decoupling structures symmetrical where the layout guidance permits, maintain continuous return paths beneath high-speed links, and place configuration, clock, reset, and JTAG access for serviceability. The 1156-pin package requires careful escape routing, so establish ball assignment and layer transitions before finalizing the component placement.
Create separate constraint sets for clocks, high-speed transceivers, memory interfaces, and ordinary user I/O so Vivado reports meaningful timing rather than one unconstrained net class. Account for board skew, package transitions, connector and via structures, and transceiver channel loss. Validate the final stack-up with field solvers, preserve return-path continuity, and perform post-route static timing analysis plus signal-integrity simulations before releasing the PCB for fabrication.
Do not substitute an XCKU035 grade solely because the logic-cell and I/O counts match. The -3, -2, and -1 speed grades can change timing closure, while the E, I, and C suffixes identify additional device attributes that must satisfy the system requirements. After any substitution, regenerate the device configuration, confirm the bitstream and programming files, rerun synthesis and implementation, and repeat timing, power, and board-level validation.
اطلاعات انطباق
The available product information identifies the device as an AMD Kintex UltraScale FPGA but does not state the requested compliance status.