XMC1402Q040X0128AAXUMA1 - 48MHz 128KB MCU | Infineon
MPN: XMC1402Q040X0128AAXUMA1 ✓ فعالXMC1402Q040X0128AAXUMA1 نمای کلی
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Arm Cortex-M0 core provides a compact instruction set and deterministic execution model suitable for embedded control. Within the product hierarchy, this MCU is an embedded microcontroller, part of the broader semiconductor category, while the XMC1400 family adds mixed-signal and timing resources intended specifically for industrial automation applications.
Key features include 48 MHz processing, 128 KB Flash, 16 KB SRAM, and a 32-bit Arm Cortex-M0 core. These figures make the device suitable for embedded motor and power-control loops where deterministic peripheral timing and local program execution are more important than high-end processor performance. Its 40-pin VQFN package also supports compact PCB layouts while providing a larger pin count than small-entry-level packages.
The XMC1400 series combines a microcontroller core with resources for motor control, power conversion, LED lighting, and HMI designs. Although the manufacturer product page identifies the XMC1402-Q040X0128-AA industrial configuration, detailed peripheral assignments, electrical limits, clock architecture, and package dimensions must be confirmed in the XMC1400 manufacturer datasheet before schematic release. The exposed-pad package also requires thermal-pad layout and soldering practices that follow the datasheet land pattern.
Typical applications include digital motor controllers, industrial power-conversion modules, LED lighting controllers, and compact HMI control boards. In each case, the MCU can execute real-time control logic while onboard peripherals handle timing, communications, and signal acquisition. A system designer should partition deterministic tasks between hardware timers and the Cortex-M0 core to maintain repeatable update timing.
For PCB implementation, place all required decoupling capacitors close to their associated supply pins, connect the exposed thermal pad to a carefully sized ground or thermal copper area, and preserve the manufacturer-defined footprint. Avoid changing the VQFN land pattern based only on nominal pin count; pad dimensions, pitch, thermal-pad geometry, and paste-volume recommendations must follow the official package drawing.
This product page combines the exact ordering information with application-focused engineering guidance, package constraints, selection trade-offs, and verified manufacturer and distributor resources. It is intended to help engineers confirm memory capacity, industrial positioning, package compatibility, and implementation requirements before committing an XMC1402 design to production.
جایگزینهای drop-in برای XMC1402Q040X0128AAXUMA1 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
XMC1402Q040X0088AAXUMA1
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XMC1402Q040X0256AAXUMA1
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XMC1401Q040X0128AAXUMA1
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XMC1400Q040X0128AAXUMA1
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XMC1403Q040X0128AAXUMA1
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XMC1402Q040X0128AAXUMA1 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M0 |
| CPU Architecture | 32-bit |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 bits |
| SRAM | 16 KB |
| ولتاژ تغذیه | 3.3 V |
| بستهبندی | PG-VQFN-40-17, 40 pins |
| Exposed Thermal Pad | Yes |
| نوع نصب | Surface mount |
| Series | XMC1000 / XMC1400 |
| Application Focus | Motor control, power conversion, LED lighting, and HMI |
راهنمای پیکربندی پین XMC1402Q040X0128AAXUMA1 pg-vqfn-40-17, 40 pins
پیکربندی پین برای XMC1402Q040X0128AAXUMA1 (پکیج pg-vqfn-40-17, 40 pins). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XMC1402Q040X0128AAXUMA1.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XMC1402Q040X0128AAXUMA1 مناسب است برای 6 کاربردs: Industrial Motor Controller, Industrial Power Conversion, LED Lighting Controller, Human-Machine Interface Controller, Embedded Data Acquisition Module, Compact Industrial Sensor Controller.
Industrial Motor Controller
The XMC1402Q040X0128AAXUMA1 fits compact industrial motor-control systems because its 48 MHz Arm Cortex-M0 core can execute real-time control logic while dedicated timer and peripheral resources handle deterministic switching tasks. Its 128 KB Flash accommodates application firmware, parameter tables, and fault-management code, while 16 KB SRAM supports state variables and control-loop buffers. The device is placed as the main controller between power-conversion circuitry and motor feedback inputs. Before schematic release, verify the required PWM channels, capture inputs, analog channels, and complementary-output functions against the official pin-description table. The 40-pin VQFN footprint is useful for compact control modules, but its exposed thermal pad and local decoupling must follow the manufacturer layout guidance.
پیشنهادی
Industrial Power Conversion
The XMC1402Q040X0128AAXUMA1 is suitable for low-cost industrial power-conversion modules that require local control, monitoring, and fault handling without a high-performance processor. Its 48 MHz Cortex-M0 core can execute compensation, sequencing, and supervisory algorithms, while 128 KB Flash provides room for control code, configuration data, and communication routines. Sixteen kilobytes of SRAM allows the firmware to maintain measurements, transient control state, and diagnostic buffers. In the target architecture, the MCU coordinates gate-drive or converter-control peripherals and evaluates voltage, current, and protection inputs through the resources listed for the exact derivative. Confirm analog accuracy, PWM resolution, and protection timings in the manufacturer datasheet, and allocate copper beneath the exposed pad for reliable heat transfer from the VQFN package.
پیشنهادی
LED Lighting Controller
The XMC1402Q040X0128AAXUMA1 can serve as the control processor in programmable LED-lighting systems where dimming sequences, current regulation, thermal monitoring, and fault reporting are handled locally. The 48 MHz Cortex-M0 core provides enough deterministic processing capability for a dedicated lighting controller, and the 128 KB Flash stores operating profiles, color tables, and firmware. Its 16 KB SRAM can buffer status data and communication commands without requiring an external microcontroller. The device should be placed between the lighting command interface and the LED driver stage, with timing peripherals generating repeatable dimming waveforms and analog inputs supporting current or temperature supervision. Review the derivative's timer channels, PWM outputs, and analog inputs before finalizing the mapping. Keep the MCU and sensitive analog grounding organized according to the manufacturer reference layout.
پیشنهادی
Human-Machine Interface Controller
The XMC1402Q040X0128AAXUMA1 is appropriate for compact industrial HMI panels and operator-control modules that require local logic rather than a full application-class processor. Its 128 KB Flash can hold interface firmware, device configuration, and basic display or keypad handling, while 16 KB SRAM supports screen buffers, message state, and communication processing. The 48 MHz Cortex-M0 core provides responsive event handling for buttons, indicators, and serial-connected peripherals. In an HMI design, the MCU may scan controls, update indicators, validate operator commands, and communicate with a higher-level controller. Confirm the exact serial-interface and external-controller options assigned to the Q040 package in the pin-description table. Its VQFN form factor helps reduce board area, although careful decoupling and exposed-pad thermal design remain necessary.
پیشنهادی
Embedded Data Acquisition Module
The XMC1402Q040X0128AAXUMA1 can form the core of a compact data-acquisition and conditioning module when the design requires moderate processing and local buffering rather than high-bandwidth computation. Its 48 MHz Cortex-M0 processor can sample enabled peripheral channels, convert readings into engineering values, apply calibration, and package results for transmission. The 128 KB Flash supports acquisition firmware and calibration tables, while 16 KB SRAM accommodates sample buffers and protocol state. Engineers should use the MCU beside the analog front end, with controlled sensor references and separated high-current switching paths. Verify the available ADC characteristics, sampling capability, and channel multiplexing for the exact derivative before fixing the signal chain. The 40-pin package provides a practical industrial footprint, but its exposed pad should be tied to the intended thermal and ground copper area.
پیشنهادی
Compact Industrial Sensor Controller
The XMC1402Q040X0128AAXUMA1 is well suited to sensor-oriented industrial nodes that combine measurement, threshold logic, local diagnostics, and communications. Its 48 MHz Cortex-M0 core supports deterministic sampling and filtering, and the 128 KB Flash accommodates firmware, lookup tables, and stored configuration without demanding an external memory device. Sixteen kilobytes of SRAM provides working space for recent measurements and communication state. In a sensor controller, the MCU can supervise inputs, apply limits, record faults, and update an output or communications interface. The 40-pin VQFN-17 package helps maintain a small board footprint, but exposed-pad heat spreading and supply decoupling must be designed according to the manufacturer package instructions. Confirm analog-input count, converter performance, and communication functions before final component selection.
پیشنهادی
دادههای مرجع مهندسی برای XMC1402Q040X0128AAXUMA1 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XMC1402Q040X0088AAXUMA1 | XMC1402Q040X0256AAXUMA1 | XMC1401Q040X0128AAXUMA1 | XMC1400Q040X0128AAXUMA1 | XMC1403Q040X0128AAXUMA1 |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-VQFN-40-17 | PG-VQFN-40-17 | PG-VQFN-40-17 | PG-VQFN-40-17 | PG-VQFN-40-17 | PG-VQFN-40-17 |
| Primary Application Focus | Motor control, power conversion, LED lighting, and HMI | Industrial embedded control | Industrial embedded control | Industrial embedded control | Industrial embedded control | Industrial embedded control |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
تفاوتهای کلیدی
- Balanced memory configuration for embedded industrial control (در مقابلXMC1402Q040X0088AAXUMA1)
- Higher code-memory headroom without changing the core architecture (در مقابلXMC1402Q040X0256AAXUMA1)
- Dedicated XMC1402 memory capacity for firmware and parameter storage (در مقابلXMC1400Q040X0128AAXUMA1)
- Industrial Cortex-M0 positioning with a 3.3 V supply (در مقابلXMC1401Q040X0128AAXUMA1)
- Single-manufacturer support within the XMC1400 platform (در مقابلXMC1403Q040X0128AAXUMA1)
یادداشتهای طراحی
Use the official PG-VQFN-40-17 land pattern and exposed-pad geometry rather than constructing a footprint from the 40-pin count. Place the required bypass capacitors directly beside the associated supply pins, provide a low-impedance connection to the exposed pad, and avoid interrupting the thermal-pad copper with narrow signal traces. Confirm the solder mask, paste, and reflow recommendations in the Infineon XMC1400 manufacturer datasheet before releasing the PCB.
The target operates from a 3.3 V supply, so the power tree must remain within the device's documented voltage limits while accommodating transient noise from adjacent motor or power-conversion stages. Place bulk capacitance near the supply entry, local high-frequency decoupling at the MCU supply pins, and maintain a low-impedance return path. Confirm capacitor voltage ratings, effective capacitance after DC bias, and any external regulator transient behavior before schematic approval.
Do not select an XMC1400-family alternative from the order code alone. Compare the derivative table, pin-description table, alternate peripheral functions, clock limits, flash size, SRAM size, and exposed-pad drawing. A same-package candidate is suitable only when every used pin retains the required function and the firmware retains sufficient memory. Preserve the original ordering code in BOMs and documentation to prevent accidental substitution.
Keep the Cortex-M0 clock path, decoupling network, and sensitive analog inputs away from high-current switching nodes and fast-edge power-stage traces. Use a continuous ground reference beneath the MCU, keep analog and digital return currents separated where the system architecture permits, and place input filtering close to the pins they protect. If the MCU controls a power converter, synchronize ADC sampling and switching activity through the assigned timer resources rather than relying on software timing alone.
The exposed thermal pad is part of the electrical and thermal design of the VQFN package. Connect it according to the manufacturer package guidance, provide multiple thermal-via paths where the footprint allows, and distribute copper into adjacent board areas without compromising return-current continuity. Check the device's operating-temperature grade and local dissipation against the final board's thermal environment; package size alone does not determine junction temperature.
اطلاعات انطباق
The manufacturer product page and datasheet establish the industrial XMC1402 configuration, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified. Confirm current material and environmental compliance documentation before production release.