XMC4504-F100F512ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4504-F100F512ACXQMA1 ✓ فعالXMC4504-F100F512ACXQMA1 نمای کلی
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals in one integrated circuit. The ARM Cortex-M4 core belongs to the Cortex-M product family and provides a 32-bit processing architecture suited to real-time embedded control. Within the broader system hierarchy, the XMC4504-F100F512ACXQMA1 is an industrial microcontroller, an embedded processing IC, and a member of Infineon's XMC4000 family.
The principal device characteristics are a 120 MHz Cortex-M4 core and 512 KB of flash in a 100-pin LQFP package. Infineon describes the XMC4500 family as combining an industry-standard ARM Cortex-M4 core with a configurable peripheral set. That architecture allows the same device family to address industrial applications with different I/O, communications, and control requirements. The target device also includes Ethernet capability according to the manufacturer product listing.
Compared with a small 8-bit or 16-bit control MCU, the Cortex-M4 architecture provides a wider processing model and substantially more program memory for networking stacks, supervisory logic, data processing, and complex state machines. The 120 MHz operating frequency gives designers additional instruction throughput for interrupt-driven control loops and protocol handling, while the 512 KB flash capacity reduces dependence on external program memory in space-constrained industrial designs.
Typical uses include industrial Ethernet controllers, automated production equipment, building and factory automation systems, networked sensors, motor-control supervisory electronics, and embedded gateways. The PG-LQFP-100-11 package provides a high pin count suitable for devices requiring multiple I/O functions and communications peripherals, although its size and lead pitch must be considered during PCB layout and manufacturing planning.
Designers should verify the complete pin assignment, peripheral availability, clock configuration, memory map, and electrical limits in the manufacturer datasheet before schematic capture. The LQFP footprint should be checked against the board geometry and assembly process, while decoupling and signal routing should follow the recommendations for the selected power and peripheral interfaces.
This product page organizes the verified device identity, core performance, memory capacity, package details, Ethernet feature, suitable industrial applications, engineering guidance, and sourcing information into a compact engineering reference for schematic design, PCB planning, and BOM review.
جایگزینهای drop-in برای XMC4504-F100F512ACXQMA1 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
XMC4504-F100K512ACXQMA1
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XMC4504-F100F512ACXQMA1 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | Industrial 32-bit microcontroller |
| Processor Core | ARM Cortex-M4 |
| Architecture | 32-bit ARM |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 |
| Ethernet Connectivity | Yes |
| Product Series | XMC4000 |
| Device Variant | XMC4504 |
| بستهبندی | PG-LQFP-100-11 |
| تعداد پایه | 100 pins |
| نوع نصب | Surface mount |
| Application Segment | Industrial applications |
راهنمای پیکربندی پین XMC4504-F100F512ACXQMA1 pg-lqfp-100-11
پیکربندی پین برای XMC4504-F100F512ACXQMA1 (پکیج pg-lqfp-100-11). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XMC4504-F100F512ACXQMA1.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XMC4504-F100F512ACXQMA1 مناسب است برای 6 کاربردs: Industrial Ethernet Controller, Factory Automation Equipment, Building Automation Controller, Networked Sensor Gateway, Motor-Control Supervisor, Automated Test and Measurement Equipment.
Industrial Ethernet Controller
The Infineon XMC4504-F100F512ACXQMA1 fits an industrial Ethernet controller because it combines a 120 MHz 32-bit ARM Cortex-M4 core, 512 KB of flash, and Ethernet connectivity in one device. The controller can execute protocol handling, supervisory logic, diagnostics, and local automation tasks while the network interface links the equipment to a supervisory system. Its 100-pin PG-LQFP-100-11 package provides numerous external connections for control signals and communications isolation. The final design still requires verification of the exact Ethernet pins, PHY interface, clock requirements, and board-layout recommendations in the Infineon manufacturer documentation.
پیشنهادی
Factory Automation Equipment
The XMC4504-F100F512ACXQMA1 is suitable for factory automation electronics that coordinate sensors, actuators, safety interlocks, and machine communication. Its 120 MHz ARM Cortex-M4 processor provides more computational headroom than a basic 8-bit controller, while 512 KB of flash can hold control software, parameter tables, diagnostics, and communication services. The industrial positioning of the XMC4504 family also makes the device relevant for automated production equipment. Designers should map required I/O and peripheral functions to the PG-LQFP-100-11 pin table, verify timing margins, and reserve suitable routing space for high-speed or sensitive interfaces.
پیشنهادی
Building Automation Controller
A building automation controller can use the XMC4504-F100F512ACXQMA1 to supervise lighting, access, environmental sensing, and networked equipment while running multiple control tasks. The 512 KB flash supports embedded application code and configuration data, and the 120 MHz Cortex-M4 core can process sensor inputs and network commands concurrently through interrupts and peripherals. Ethernet connectivity enables the controller to participate in centralized building-management systems. Before schematic release, check the required network magnetics and connector interface, confirm peripheral assignments, and follow the manufacturer's decoupling and layout guidance for dependable industrial operation.
پیشنهادی
Networked Sensor Gateway
The Infineon XMC4504-F100F512ACXQMA1 can serve as a gateway controller for industrial sensors that must convert local measurements into network data. Its 120 MHz ARM Cortex-M4 core supports protocol processing and device-management logic, while 512 KB of flash accommodates gateway firmware, data formats, and update-related functions. The Ethernet feature allows aggregated sensor information to be distributed to supervisory equipment without a separate network processor. The appropriate external network interface still depends on the selected peripheral implementation, so engineers should verify PHY requirements, isolation, reference clocking, and signal-routing requirements in the manufacturer documentation.
پیشنهادی
Motor-Control Supervisor
The XMC4504-F100F512ACXQMA1 can provide supervisory and communications functions around a dedicated motor-control subsystem. At 120 MHz, the Cortex-M4 core can manage state machines, fault handling, parameter processing, operator commands, and Ethernet-based diagnostics, while the 100-pin package offers ample connections for external control and monitoring signals. This arrangement allows the XMC4504 to handle supervisory tasks without defining it as a replacement for a dedicated power-stage controller. Final partitioning should be based on the peripheral configuration, real-time interrupt requirements, electrical limits, and safety requirements of the complete motor system.
پیشنهادی
Automated Test and Measurement Equipment
The XMC4504-F100F512ACXQMA1 can coordinate automated test equipment where a controller must handle sequencing, communication, data acquisition, and machine control. Its 120 MHz 32-bit ARM Cortex-M4 core supports interrupt-heavy workflows, while 512 KB of flash provides room for embedded test software and configuration data. Ethernet connectivity can connect the tester to a plant network or remote service interface, and the 100-pin package accommodates numerous control and measurement connections. Engineers should confirm ADC, timer, communication, and analog-interface requirements for the selected device variant before assigning it to a precision measurement design.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XMC4504-F100F512ACXQMA1 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XMC4504-F100K512ACXQMA1 |
|---|---|---|
| Package | PG-LQFP-100-11 | PG-LQFP-100-11 |
| Brand | Infineon Technologies | Infineon Technologies |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Flash Memory | 512 KB | 512 KB |
| Flash Organization | 512K x 8 | 512K x 8 |
| Ethernet Connectivity | Yes | Yes |
| Product Series | XMC4000 | XMC4000 |
| Device Variant | XMC4504 F-series ordering code | XMC4504 K-series ordering code |
تفاوتهای کلیدی
- Documented 512 KB flash configuration (در مقابلXMC4504-F100K512ACXQMA1)
- Same-package industrial control platform (در مقابلXMC4504-F100K512ACXQMA1)
- 120 MHz ARM Cortex-M4 processing (در مقابلXMC4504-F100K512ACXQMA1)
یادداشتهای طراحی
Use the manufacturer PG-LQFP-100-11 package drawing and land pattern when defining the PCB footprint. The 100-pin LQFP has closely spaced leads on all four sides, so assembly allowances and routing escape channels must be planned together. Confirm pin 1 orientation, exposed thermal-pad requirements, courtyard clearance, and solder-mask geometry against the current Infineon package documentation rather than scaling a generic 100-pin drawing.
Place local decoupling capacitors close to the device power pins and route them with low loop inductance. Follow the manufacturer datasheet for the exact supply pins, voltage combinations, decoupling values, and permitted operating regions. Separate sensitive analog or communication returns from high-current paths where the pin configuration allows it, and avoid assuming that the 120 MHz CPU rating implies a particular supply voltage or power-consumption figure.
Map Ethernet, clock, and other high-speed signals only after confirming the enabled peripheral and pin assignment in the Infineon documentation. Use a continuous reference plane, controlled impedance routing, appropriate length matching, and protection appropriate to the industrial environment. Keep crystal or clock paths short and isolated from switching nodes, and verify the external component values and drive settings against the manufacturer recommendation for the selected clock configuration.
Do not treat identical packages or headline CPU and flash specifications as proof of complete substitution. Compare the F and K ordering codes, memory organization, qualification, temperature range, peripheral availability, boot behavior, and exact pin functions before replacing XMC4504-F100F512ACXQMA1 with XMC4504-F100K512ACXQMA1. Also confirm the configured clock source, memory initialization process, and firmware compatibility on the first prototype.
اطلاعات انطباق
Infineon identifies the device as industrial, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was present in the product information. AEC-Q100 is not applicable to the stated industrial positioning.