Circuits intégrés

Sous-catégories

📁 ADC/DAC 3 100+ produits 📁 CI amplificateurs 1 700+ produits 📁 Codecs audio 18 produits 📁 CI audio 2 produits 📁 Horloge et synchronisation 640+ produits 📁 Comparator ICs 1 produits 📁 DSP 1 100+ produits 📁 CI d'acquisition de données 2 produits 📁 Potentiomètres numériques 4 produits 📁 Pilotes et contrôleurs d'affichage 1 produits 📁 FPGA & CPLD 7 100+ produits 📁 Circuits intégrés d'interface 3 100+ produits 📁 Pilotes de LED 1 produits 📁 CI logiques 450+ produits 📁 CI mémoire 870+ produits 📁 Microcontrôleurs 20 000+ produits 📁 Microprocesseurs 4 produits 📁 Pilotes de moteur 1 produits 📁 Autres 1 produits 📁 Sensor and Detector Interfaces 1 produits 📁 Circuits intégrés spécialisés 15 produits 📁 CI vidéo 13 produits

Produits (38 000+)

PIC16F15354T-I/SS - 8-bit XLP MCU 7KB FLASH 28-SSOP | Microchip
PIC16F15354T-I/SS

PIC16F15354T-I/SS - 8-bit XLP MCU 7KB FLASH 28-SSOP | Microchip

The Microchip Technology PIC16F15354T-I/SS is an 8-bit PIC microcontroller from the PIC16(L)F153xx family, featuring 7 KB (4K x 14 words) of Flash program memory, 512 bytes of SRAM, and an enhanced mid-range 16-bit instruction set core running up to 32 MHz. It is housed in a 28-pin SSOP (Shrink Small Outline Package, 0.209 inch / 5.30 mm body width) supplied on Tape & Reel. A microcontroller (MCU) is a single-chip computer containing a CPU, RAM, non-volatile program memory, and a rich set of on-chip peripherals (ADC, timers, communications, etc.). MCUs sit within the embedded semiconductor hierarchy as the smallest functional compute node for deterministic real-time control, below microprocessors and above simple digital logic. The PIC16F153xx family extends this role with Core Independent Peripherals (CIPs) that offload tasks from the CPU, enabling faster, lower-power, and more deterministic system behavior. Key features include eXtreme Low-Power (XLP) technology with active current under 1 mA/MIPS and deep-sleep currents measured in nanoamps, four 10-bit PWMs with complementary waveform generation, a 10-bit ADC with computation (ADC2), a 5-bit/8-bit DAC, two comparators, a temperature indicator, two EUSART (LIN-capable), SPI, I2C, four Configurable Logic Cells (CLC), a Complementary Waveform Generator (CWG), and Memory Access Partition (MAP) for bootloader-style partitioning. The device operates from 2.3 V to 5.5 V across an industrial temperature range of -40C to +85C and supports in-circuit serial programming (ICSP) via two pins. The SSOP-28 footprint, wide operating range, and rich CIP mix position this part for sensor hubs, battery-powered monitors, LED drivers, and small appliance control. Typical applications include IoT sensor nodes, low-power wireless sensor hubs, battery chargers, LED lighting controllers, small home appliances, and automotive body/comfort subsystems. When designing with this part, reserve one of the CLC cells for hardware-based debouncing of mechanical inputs to free CPU cycles, and consult the device-specific silicon errata before locking firmware.

Devis Contact
PIC16F15355-E/ML - 8-Bit 32MHz 14KB Flash MCU 28-QFN | Microchip
PIC16F15355-E/ML

PIC16F15355-E/ML - 8-Bit 32MHz 14KB Flash MCU 28-QFN | Microchip

The Microchip Technology PIC16F15355-E/ML is an 8-bit RISC PIC16 microcontroller with 14KB (8K x 14) FLASH program memory, 1KB RAM, and a 32MHz maximum clock speed, housed in a 28-pin QFN (6x6 mm) package with exposed pad. This device is part of the PIC16(L)F153XX family and integrates Core Independent Peripherals (CIPs), Intelligent Analog, communication peripherals, and eXtreme Low-Power (XLP) technology for low-power embedded applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (FLASH/ROM), data memory (RAM), and integrated peripherals such as ADCs, timers, and communication interfaces. Within the broader semiconductor taxonomy, an MCU is a type of integrated circuit (IC) > microcontroller > 8-bit microcontroller > PIC16 architecture > PIC16F153XX family. The 8-bit PIC architecture provides deterministic instruction execution, low power consumption, and a mature toolchain (MPLAB X IDE, XC8 compiler) that has been deployed in billions of devices across consumer, industrial, and automotive markets. Key features of the PIC16F15355-E/ML include 4 PWM modules, a hardware comparator, a 5-bit DAC, a 10-bit ADC, a Complementary Waveform Generator (CWG), 4 Configurable Logic Cells (CLC), 2 EUSART (Enhanced USART) modules, and SPI/I2C interfaces. The device supports both 3V operation and a wide voltage range typical of the PIC16F (FLASH) variant, with XLP sleep currents measured in nanoamps. The 28-QFN package provides a compact 6x6 mm footprint with an exposed thermal pad for improved heat dissipation in space-constrained designs. The architecture uses a modified Harvard RISC core with a single-cycle instruction set and 14-bit wide instruction words. The CIPs (Core Independent Peripherals) such as CLC, CWG, and the hardware comparator operate without CPU intervention, offloading real-time tasks and enabling lower active power. The MAP (Memory Access Partition) feature allows partitioning of FLASH into bootloader and application regions, supporting field-upgradable firmware. Typical applications include IoT sensor nodes, battery-powered instrumentation, LED lighting controllers, low-power wireless HMI front-ends, consumer appliance controls, and industrial sensor interfaces. The combination of multiple communication peripherals (2 EUSART + SPI + I2C) and 4 PWMs makes it particularly well-suited for motor-control and human-machine interface (HMI) applications. When designing with this MCU, ensure the exposed pad (EP) of the QFN package is soldered to a sufficient ground copper pour for both thermal and electrical performance. Decoupling capacitors (100 nF + optional bulk) must be placed close to VDD pins. Programming/debugging uses the ICSP interface (PGD/PGC), and firmware development is supported by MPLAB X IDE with the free XC8 compiler. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, providing a single-source reference for procurement and design engineers evaluating the PIC16F15355-E/ML.

Devis Contact
PIC16F15355-E/SP - 8-Bit MCU, 14KB Flash, 28-SPDIP | Microchip
PIC16F15355-E/SP

PIC16F15355-E/SP - 8-Bit MCU, 14KB Flash, 28-SPDIP | Microchip

The Microchip Technology PIC16F15355-E/SP is an 8-bit PIC microcontroller from the PIC16 (L)F153xx family running at up to 32 MHz with 14 KB (8K x 14 words) of Flash program memory, packaged in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. It combines intelligent analog, Core Independent Peripherals (CIPs), and eXtreme Low-Power (XLP) technology, targeting general-purpose and low-power embedded designs. Operating voltage spans 2.3 V to 5.5 V across an extended -40 C to +125 C temperature range, with 1 KB SRAM and 256 bytes of EEPROM data memory. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The 8-bit MCU category occupies the lowest-power tier of the embedded computing hierarchy (8-bit -> 16-bit -> 32-bit MCU -> microprocessor -> SoC) and dominates cost-sensitive applications where deterministic real-time behavior outweighs raw throughput. Microchip's enhanced mid-range core adds a 14-bit instruction word and a hardware multiplier, letting one PIC16 family cover most sensor-interface, lighting-control, and small-motor drive tasks previously reserved for 16-bit parts. Key features include four 10-bit PWM outputs, one comparator, a 5-bit and 10-bit DAC, a 10-bit ADC, a Complementary Waveform Generator (CWG), four Configurable Logic Cells (CLC), two Enhanced USARTs, and SPI / I2C peripherals. Core Independent Peripherals allow logic to be wired in hardware without CPU cycles, reducing active-mode current and enabling sleep-mode event handling. XLP technology delivers typical sleep currents in the nanoamp range, suiting battery and energy-harvesting designs. Typical applications include low-power IoT sensor nodes, battery-powered home automation, LED lighting controllers, automotive interior accessories, small appliance motor control, and consumer white-goods user interfaces. The 28-SPDIP footprint also makes it well suited to through-hole prototyping, breadboards, and educational platforms where the part can be repeatedly inserted and removed. When designing with the PIC16F15355-E/SP, reserve one GPIO for an ICD/ICSP header so MPLAB Xpress and PICkit programmers can attach without rework. Always include decoupling capacitors of 100 nF plus 10 uF within 5 mm of VDD, and tie all unused I/O pins to defined logic levels to minimize sleep current. For low-power designs, use the CLC and CWG to keep the CPU in sleep while peripherals continue to operate.

Devis Contact
PIC16F15355-E/SS - 8-bit XLP MCU 14KB Flash 28-SSOP | Microchip
PIC16F15355-E/SS

PIC16F15355-E/SS - 8-bit XLP MCU 14KB Flash 28-SSOP | Microchip

The Microchip Technology PIC16F15355-E/SS is an 8-bit PIC microcontroller from the PIC16F153xx family, featuring 14KB of Flash program memory, 1KB of RAM, and a 32 MHz CPU core, housed in a 28-pin SSOP package. The -E temperature grade denotes an extended operating range of -40C to +125C, making it suitable for industrial and harsh-environment designs. An 8-bit microcontroller (MCU) is a small, low-power computing core with on-chip Flash, RAM, peripherals, and I/O, used to sense, control, and communicate in embedded systems. Within the broader semiconductor hierarchy, an MCU sits under microcontroller -> embedded processor -> semiconductor device. The PIC16F153xx family adds Core Independent Peripherals (CIPs) such as CLC, CWG, and configurable logic to offload timing-critical tasks from the CPU. Key features of the PIC16F15355-E/SS include 4 PWM channels, 2 comparators, a 5-bit DAC, a 10-bit ADC with up to 24 channels, 4 Configurable Logic Cells (CLC), a Complementary Waveform Generator (CWG), and 2 EUSART peripherals supporting SPI and I2C. The eXtreme Low-Power (XLP) technology enables nanoWatt sleep currents in the order of tens of nA, allowing battery-powered nodes to run for years on a single cell. Architecturally, the device uses an enhanced mid-range 8-bit RISC core with a hardware multiplier, a 31-level hardware stack, and interrupt-driven CIP peripherals that operate without CPU intervention. The combination of 14KB self-programmable Flash and a wide peripheral set lets designers implement mixed-signal front-ends in firmware without external glue logic. Typical applications include low-power IoT sensor nodes, consumer appliances, LED lighting control, battery-operated handheld instruments, motor control signal conditioning, and industrial sensor interface boards. The wide memory and rich analog/mixed-signal peripherals make it well suited as a system supervisor or signal-conditioning MCU. When designing with this MCU, plan pin assignments early - the 28-SSOP exposes most I/Os but multiplexing of analog and CIP functions requires careful PPS configuration. Always enable the watchdog timer and use the fail-safe clock monitor for unattended deployments. This page synthesizes verified distributor pricing, cross-brand drop-in alternatives from the PIC16F153xx family, and practical design notes not found in the manufacturer datasheet summary.

Devis Contact
PIC16F15355-I/MV - 8-Bit MCU, 14KB Flash, 32MHz | Microchip
PIC16F15355-I/MV

PIC16F15355-I/MV - 8-Bit MCU, 14KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F15355-I/MV is an 8-bit PIC microcontroller featuring 14KB Flash program memory, 512B RAM, and a 32MHz internal oscillator in a 28-pin UQFN (4x4 mm) package. Part of the PIC16F153xx family, it combines Intelligent Analog, Core Independent Peripherals (CIPs), and communication peripherals with eXtreme Low-Power (XLP) technology for general-purpose and energy-constrained designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals. Within the broader semiconductor taxonomy, an MCU belongs to the category of embedded processors -> microcontrollers -> 8-bit microcontrollers -> PIC microcontrollers. The 8-bit PIC architecture from Microchip uses a modified Harvard RISC core optimized for deterministic real-time control with a small instruction set and single-cycle execution for most instructions. Key features of the PIC16F15355-I/MV include 14KB self-programmable Flash (8K x 14 words), 512B RAM, 256B EEPROM, four 10-bit PWM outputs, a 10-bit ADC with computation, a 5-bit DAC, two comparators, a Complementary Waveform Generator (CWG), and communication interfaces including two EUSART, SPI, and I2C. The device operates from 2.3V to 5.5V across an industrial temperature range of -40C to +85C, making it suitable for both battery-powered and industrial applications. The PIC16F15355-I/MV uses Microchip's enhanced mid-range core with a 49-instruction set and 16-level hardware stack. Core Independent Peripherals such as the CWG, NCO (Numerically Controlled Oscillator), and configurable logic cells allow complex timing and signal generation without CPU intervention, enabling deterministic low-latency responses in motor control and lighting applications. Typical applications include low-power IoT sensor nodes, LED lighting control, consumer appliances, battery-powered instruments, and industrial control modules. The XLP technology supports sleep currents below 1 uA with multiple low-power modes (Sleep, Doze, Idle), allowing years of operation on a single coin cell. The CWG and 10-bit PWM are well-suited for driving power MOSFETs in synchronous buck or half-bridge converters. When designing with this device, allocate pin functions early because some peripherals share I/O pins. Use the MPLAB X IDE with MPLAB Code Configurator (MCC) for rapid peripheral setup, and verify the 32MHz internal oscillator accuracy against timing-critical requirements such as UART baud-rate generation. This page synthesizes distributor pricing, drop-in same-family and cross-brand alternatives, and practical design notes not found in the manufacturer datasheet alone, supporting faster component selection for embedded engineers.

Devis Contact
PIC16F15355-I/SO - 8-bit MCU, 14KB Flash, 32MHz, 28-SOIC | Microchip
PIC16F15355-I/SO

PIC16F15355-I/SO - 8-bit MCU, 14KB Flash, 32MHz, 28-SOIC | Microchip

The Microchip Technology PIC16F15355-I/SO is an 8-bit PIC16 enhanced mid-range microcontroller featuring 14KB (8K x 14 words) of Flash program memory, 1KB of RAM, and a 32MHz internal oscillator, packaged in a 28-pin SOIC (SO) wide-body package rated for industrial -40C to +85C operation. The device provides 14KB Flash, 32MHz CPU, and 28-SOIC packaging, with a 14-bit instruction word optimized for deterministic, byte-level control. An 8-bit microcontroller (MCU) is a compact single-chip computer that integrates a CPU, Flash program memory, RAM, EEPROM, and a set of peripherals onto one silicon die. PIC microcontrollers use a modified Harvard RISC architecture with a 14-bit instruction word optimized for deterministic, byte-level control tasks. The PIC16F15355 belongs to the PIC16F153xx family, sitting in the hierarchy: 8-bit PIC microcontroller -> Microchip PIC16 family -> enhanced mid-range core -> general-purpose embedded controller. These devices are favored for low-power, sensor-driven, and cost-sensitive embedded designs where footprint, peripheral integration, and power consumption matter more than raw compute throughput. Key features include up to 32MHz CPU speed via the internal HFINTOSC, four 16-bit timers, a 10-bit ADC with computation (ADC2), Complementary Waveform Generator (CWG), Capture/Compare/PWM (CCP), Configurable Logic Cell (CLC), Numerically Controlled Oscillator (NCO), and the eXtreme Low-Power (XLP) sleep modes drawing under 1 uA typical. The 28-SOIC package is a wide-body, 1.27mm-pitch surface-mount variant offering easy hand-soldering and breadboard compatibility for development. The PIC16F15355 uses an enhanced mid-range 14-bit RISC core with a 49-instruction set, hardware stack, and interrupt controller supporting both core and peripheral interrupt sources. The device integrates Core Independent Peripherals (CIPs) such as CLC, NCO, and CWG that operate without CPU intervention, enabling deterministic real-time response and freeing the core for low-power sleep. The architecture separates instruction bus (14-bit) and data bus (8-bit) for predictable fetch/execute timing. Typical applications include battery-powered IoT sensor nodes, consumer appliance control panels, LED lighting controllers, low-cost industrial sensor interfaces, and battery chargers. The wide -40C to +85C industrial temperature range and integrated peripherals make it a flexible general-purpose controller for both consumer and light-industrial products. The XLP feature set extends battery life in always-on sensor applications. When designing with this part, plan for an ICD/ICSP programming/debug header on the PCB; pin 1 (MCLR/VPP) and the PGED/PGEC pair must be accessible for in-circuit programming. Provide a robust VDD decoupling network (100 nF + 1 uF bulk) close to the supply pins, and verify that the chosen clock configuration (internal HFINTOSC vs external crystal) matches your timing budget and accuracy requirements. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a faster path from part selection to prototype.

Devis Contact
PIC16F15355-I/SP - 14KB Flash 8-bit MCU, 32MHz, 28-SPDIP | Microchip
PIC16F15355-I/SP

PIC16F15355-I/SP - 14KB Flash 8-bit MCU, 32MHz, 28-SPDIP | Microchip

The Microchip Technology PIC16F15355-I/SP is an 8-bit PIC microcontroller from the PIC16(L)F153xx family, featuring 14KB (8K x 14 words) of Flash program memory, 1KB RAM, and a 32MHz internal oscillator, housed in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. It is built on an enhanced mid-range 8-bit CPU core with 49 instructions and 16-stack levels, combining eXtreme Low-Power (XLP) technology with Core Independent Peripherals (CIPs). An 8-bit PIC microcontroller is a compact, low-power programmable processor that integrates a CPU, non-volatile Flash memory, RAM, and configurable peripherals into a single IC. It belongs to the microcontroller hierarchy (MCU -> 8-bit MCU -> PIC16 family -> Microchip mid-range lineup) and serves as the brain of embedded systems where deterministic real-time response and ultra-low sleep current are critical. Compared with 32-bit MCUs, 8-bit PIC devices trade raw throughput for lower cost, smaller code footprint, and simpler development, making them dominant in consumer, industrial sensing, and IoT endpoints. Key features of the PIC16F15355-I/SP include four 16-bit PWMs with complementary waveform generation, a 10-bit ADC with computation (ADC²), two 5-bit/8-bit DACs, four Configurable Logic Cells (CLC), two comparators, two EUSART, SPI, and I²C interfaces. The XLP technology delivers sleep currents down to 30 nA typical with RTCC retention and watchdog enabled, suiting battery-powered sensor nodes. The device operates from 2.3V to 5.5V across -40°C to +85°C industrial range, supports up to 25 mA source/sink per I/O, and includes 1KB of EEPROM data memory and 256-byte user data row in Flash. On-board debugging is provided through MPLAB ICD and in-circuit serial programming (ICSP) via two pins. Typical applications include LED lighting drivers, HVAC fan/sensor control, low-power remote controls, home appliance user interfaces, battery-powered IoT sensor nodes, and small motor control loops. The combination of CIP-driven waveform generation and ultra-low sleep current enables firmware-only implementations without external timers or analog ICs. When designing with this MCU, allocate the ADC² post-processing math carefully because 14KB Flash fills quickly when mixing CLC state machines, EEPROM emulation, and bootloader code. For noise immunity on analog rails, place a 100nF ceramic bypass cap adjacent to each VDD/AVDD pin pair. This page consolidates distributor pricing, same-family pin-compatible alternatives, and practical design notes that are not collocated in the Microchip datasheet, helping engineers make a faster sourcing decision.

Devis Contact
PIC16F15355-I/SSVAO - 14KB Flash 8-bit MCU, AEC-Q100, SSOP-28 | Microchip
PIC16F15355-I/SSVAO

PIC16F15355-I/SSVAO - 14KB Flash 8-bit MCU, AEC-Q100, SSOP-28 | Microchip

The Microchip PIC16F15355-I/SSVAO is an 8-bit PIC® XLP™ microcontroller built around the PIC16(L)F153xx family architecture, integrating 14KB Flash program memory, 1KB SRAM, and a 32MHz internal oscillator in an automotive-grade 28-pin SSOP package. The automotive suffix "VAO" denotes AEC-Q100 qualification, making this part the preferred choice for safety-relevant automotive ECUs that must operate across -40C to +125C ambient conditions. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a mix of digital and analog peripherals. PIC® MCUs use a modified Harvard RISC architecture, executing one instruction per clock cycle for deterministic, low-power embedded control. Within the broader power management and embedded hierarchy, an MCU sits at the lowest firmware-driven layer: above it are microprocessors, SoCs, and application processors. The 8-bit PIC16 family specifically targets cost- and power-sensitive applications where 32-bit performance is not required. The PIC16F15355-I/SSVAO integrates Intelligent Analog peripherals (10-bit ADC, 5-bit DAC, comparators), Core Independent Peripherals (CIPs) such as Configurable Logic Cells and PWMs, and Microchip's eXtreme Low-Power (XLP) technology that delivers sub-uA sleep currents. The 28-pin SSOP footprint with 0.65mm pitch is one of the most widely used automotive MCU packages, enabling direct PCB reuse across PIC16F15344/15345/15354 family variants. Typical applications include automotive body control modules, sensor signal conditioning nodes, low-power IoT sensor hubs, LED lighting controllers, and small motor/valve drivers. CIPs allow timer-driven state machines that offload work from the CPU, lowering average current and enabling years of operation from a single battery. When designing with this part, evaluate whether the application truly needs automotive-grade qualification (AEC-Q100) versus the standard PIC16F15355-I/SS. The VAO variant is typically 20-40% more expensive and has longer lead times, so reserve it for automotive-grade projects.

Devis Contact
PIC16F15355T-E/SSVAO - 14KB Flash 8-bit MCU AEC-Q100 | Microchip
PIC16F15355T-E/SSVAO

PIC16F15355T-E/SSVAO - 14KB Flash 8-bit MCU AEC-Q100 | Microchip

The Microchip PIC16F15355T-E/SSVAO is an 8-bit PIC microcontroller from the PIC16(L)F153XX family featuring 14KB (8K x 14) of Flash program memory and 1KB of SRAM, housed in a 28-pin SSOP package. The device operates at up to 32MHz and integrates intelligent analog peripherals, Core Independent Peripherals (CIPs), and eXtreme Low-Power (XLP) technology for energy-efficient embedded designs. The /VAO suffix designates this variant as an automotive-grade part qualified to the AEC-Q100 standard. An 8-bit microcontroller (MCU) is a small, self-contained computer-on-a-chip that combines a CPU, memory, and peripherals. The PIC16F family belongs to the mid-range PIC architecture lineage, sitting between the baseline PIC10/12/16 families and the higher-performance PIC18/dsPIC families. Modern 8-bit MCUs like the PIC16F15355 integrate sophisticated peripherals such as Configurable Logic Cells (CLC), Complementary Waveform Generators (CWG), and numerically-controlled oscillators that historically required external components. The XLP technology is specifically designed for battery-powered applications, providing sleep currents in the nanoamp range. Key features include 4 PWM channels, a hardware comparator, a 5-bit DAC, a 10-bit ADC, 4 Configurable Logic Cells, a Complementary Waveform Generator, 2 EUSART, and SPI/I2C interfaces. The device supports up to 14KB of self-programmable Flash, 1KB of SRAM, and 256 bytes of EEPROM, giving embedded designers flexibility for both bootloaders and parameter storage. Peripherals such as CLC and CWG allow hardware-implemented state machines and complementary PWM outputs without CPU intervention. The architecture combines the standard PIC16 enhanced mid-range core with peripheral pin select, multiple clock sources, and an instruction set optimized for C-compiled code. The /VAO automotive qualification, combined with the operating temperature range of -40C to +125C, makes this part particularly suited to harsh under-hood and body-electronics environments where consumer-grade parts would fail. The /VAO suffix indicates Microchip's automotive-grade qualification, distinguishing it from the standard PIC16F15355T-I/SSVAO industrial variant. Typical applications include automotive body electronics (seat controllers, mirror adjusters, lighting modules), sensor signal conditioning nodes, low-power IoT end nodes, and human-machine interface (HMI) subsystems where deterministic peripheral operation reduces software complexity. The combination of XLP sleep modes with rapid wake-up also suits battery-backed sensors and remote controls. For designs migrating from older PIC16F1xxx parts, this part provides a transparent upgrade path while adding modern CIP functionality. When designing with this MCU, allocate adequate Flash headroom for bootloader and field-upgrade use cases. Always include decoupling on VDD/VSS per the datasheet's recommended layout and respect the in-circuit debug pinout when allocating PCB space for programming headers.

Devis Contact
PIC16F15355T-I/ML - 14KB Flash 8-bit MCU 32MHz 28-QFN | Microchip
PIC16F15355T-I/ML

PIC16F15355T-I/ML - 14KB Flash 8-bit MCU 32MHz 28-QFN | Microchip

The Microchip Technology PIC16F15355T-I/ML is an 8-bit PIC® microcontroller from the PIC16(L)F153XX family, featuring 14KB (8K x 14 words) of Flash program memory, 1KB of RAM, and an integrated 32MHz internal oscillator, housed in a 28-pin QFN (6x6 mm) package. It combines eXtreme Low-Power (XLP) technology, intelligent analog peripherals, and Core Independent Peripherals (CIPs) for energy-efficient embedded designs. The "T" suffix denotes Tape & Reel packaging, "I" indicates the industrial -40C to +85C operating range, and "/ML" specifies the 28-QFN (6x6) leadless package with an exposed thermal pad. A PIC microcontroller is a Harvard-architecture 8-bit RISC processor family built around a modified instruction set optimized for deterministic real-time control. Within the broader semiconductor hierarchy, a PIC MCU sits under microcontroller -> embedded processor -> integrated circuit. The PIC16F1xxx family adds modern peripherals (CLC, NCO, DSM) to legacy PIC16 cores, enabling sophisticated timing, signal generation, and inter-peripheral logic without CPU intervention - a hallmark of Microchip's CIP philosophy. Key features include up to 32MHz CPU speed with 16 MIPS throughput, 14KB self-programmable Flash with device information area (DIA) and unique device ID, 1KB SRAM, and 256 bytes of EEPROM. Communication peripherals include two EUSART (configurable as RS-232/RS-485 LIN), SPI, and I2C masters/slaves with address masking. Analog integration includes a 10-bit ADC with computation (ADC2) automating averaging, filtering, oversampling, and threshold comparisons, plus a 5-bit and 10-bit DAC, two comparators, and a zero-cross detect. Four Configurable Logic Cells (CLC), a Complementary Waveform Generator (CWG), four 10-bit PWMs, and a Numerically Controlled Oscillator (NCO) provide CIP-driven signal synthesis. The architecture uses a modified PIC16 Harvard core with a 14-bit instruction word and separate 14-bit Flash data path, supported by a hardware interrupt controller and peripheral pin select (PPS) for flexible I/O mapping. The XLP sleep currents and IDLE/DOZE modes make the part suitable for battery-backed and energy-harvesting designs. Typical applications include low-power IoT sensor nodes, home appliances and white goods, LED lighting controllers, battery chargers, automotive body electronics (non-safety), industrial sensor transmitters, and consumer remote controls. The combination of CIPs and 5V tolerance broadens its fit in mixed-signal legacy systems. When designing with this MCU, allocate sufficient Flash for the configuration words and consider using the Code Protection bits to safeguard IP; on 28-QFN layouts, provide thermal vias under the exposed pad to keep junction temperature within the -40C to +85C industrial window.

Devis Contact
PIC16F15355T-I/MV - 8-bit MCU, 14KB Flash, 32MHz, 28-UQFN | Microchip
PIC16F15355T-I/MV

PIC16F15355T-I/MV - 8-bit MCU, 14KB Flash, 32MHz, 28-UQFN | Microchip

The Microchip Technology PIC16F15355T-I/MV is an 8-bit PIC RISC microcontroller with 14KB Flash program memory, 32MHz CPU speed, and a wide 2.5V/3.3V/5V operating voltage range, packaged in a 28-pin UQFN (4x4 mm) with exposed pad for tape-and-reel delivery. The part carries the PIC® XLP™ 16F family designation and integrates Intelligent Analog, Core Independent Peripherals (CIPs), multiple PWMs, temperature sensor, and communication peripherals. Tape-and-reel (T) and industrial temperature range (-40C to +85C) suffixes are reflected in the MPN. An 8-bit PIC microcontroller (MCU) is a single-chip computer built around an 8-bit RISC core. The PIC16F15355 belongs to the PIC® XLP™ (eXtreme Low Power) 16F family within the broader 8-bit PIC microcontroller hierarchy (8-bit PIC -> PIC microcontroller -> microcontroller -> embedded processor -> semiconductor). It executes one instruction per clock cycle, integrates non-volatile Flash program memory plus SRAM, and combines digital I/O, analog, communication, and timing peripherals into one IC to replace discrete logic in embedded designs. Key features include 14KB (8K x 14) Flash program memory, 1KB SRAM, 256 bytes of EEPROM, a 32MHz internal oscillator, four 8-bit timers plus two CCP and two PWM peripherals, a 10-bit ADC with up to 24 channels, two comparators, an 8-bit DAC reference, I2C/SPI/EUSART (LIN-capable) communication, and an integrated temperature indicator. The XLP sleep current of roughly 50 nA and active current in the microampere range make the device well-suited to battery-powered designs. The architecture uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, hardware multiplier, single-cycle hardware stack, and Memory Access Partition (MAP) for code protection. CIP blocks such as Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), and Zero-Cross Detect (ZCD) allow functions normally handled in firmware to be offloaded to hardware, reducing code size and latency. Typical applications include IoT sensor nodes, low-power wireless sensor hubs, HVAC thermostat controls, battery-powered consumer appliances, automotive body and lighting modules, and small industrial control boards. The wide 2.3V-5.5V VDD range lets the part operate directly from 2xAA cells, a 3.3V regulated rail, or a 5V USB rail. For PCB layout, expose the UQFN-28 thermal pad to a top-layer copper pour stitched with at least 8 thermal vias to the ground plane for thermal dissipation and ground reference. Decouple VDD with a 100 nF X7R ceramic placed within 2 mm of the pin and add a bulk 1-10 uF tantalum or aluminum-polymer capacitor if the source is more than 25 mm away. The MCLR pin must be pulled up to VDD through 10-47 kOhm unless no external reset is desired. This page synthesizes tape-and-reel pricing, same-family PIC drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC16F15355T-I/SS - 14KB Flash 8-bit MCU, 32MHz, SSOP-28 | Microchip
PIC16F15355T-I/SS

PIC16F15355T-I/SS - 14KB Flash 8-bit MCU, 32MHz, SSOP-28 | Microchip

The Microchip Technology PIC16F15355T-I/SS is an 8-bit RISC PIC16 microcontroller with 14KB (8K x 14) Flash program memory and 1KB RAM, housed in a 28-pin SSOP (5.30mm / 0.209in) package and supplied on Tape & Reel. It executes up to 32MHz, integrates Intelligent Analog peripherals, four Core Independent Peripherals (CIPs) including Configurable Logic Cells (CLC) and Complementary Waveform Generator (CWG), four 10-bit PWMs, a comparator, a 5-bit DAC, a 24-channel 10-bit ADC, two EUSART, and SPI/I2C, and is qualified for the eXtreme Low-Power (XLP) family with multiple power-managed sleep modes. Tape-and-reel packaging (T suffix) and the -I industrial temperature grade (-40C to +85C) make this variant the production-ready choice for high-volume surface-mount assembly. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, integrating CPU, Flash, RAM, EEPROM, timers, ADCs, and communication peripherals on one CMOS die. MCUs sit within the broader hierarchy of microcontroller -> embedded controller -> semiconductor -> integrated circuit, and the PIC16 sub-family is Microchip's mid-density XLP line that balances cost, peripheral richness, and ultra-low sleep current for battery-powered and always-on applications. Key features include 25 general-purpose I/O pins, 4 PWM channels, 4 CLC blocks, CWG for complementary outputs, 2 EUSART, SPI/I2C, an on-chip 5-bit DAC, and 24 ADC channels. The XLP architecture provides sub-uA sleep currents with retention and an ultra-low-power wake-up timer, allowing the part to run for years from a single coin cell. Architecturally, the PIC16F15355 combines a 14-bit instruction-word PIC16 core with a 49-instruction set, hardware Multiply, and a deterministic interrupt controller; its Core Independent Peripherals (CLC, CWG, NCO, PWM) can run without the CPU, offloading waveform generation and signal conditioning to dedicated hardware for deterministic latency. Typical applications include battery-powered IoT sensor nodes, low-power wireless sensor platforms, automotive body and HVAC sub-modules, home appliances and white goods, and consumer handheld devices where 14KB Flash, 1KB RAM, and rich CIPs cover the firmware footprint without external components. When designing with this MCU, budget Flash carefully: the 14KB size accommodates typical state-machine firmware, but C-code with printf-style libraries will exhaust it quickly - prefer MISRA-C lite libraries, and reserve the second 256-byte Flash page for the bootloader. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical low-power design notes not found in the manufacturer datasheet.

Devis Contact
PIC16F15356-E/ML - 8-Bit 32MHz MCU, 28KB Flash, 28-QFN | Microchip
PIC16F15356-E/ML

PIC16F15356-E/ML - 8-Bit 32MHz MCU, 28KB Flash, 28-QFN | Microchip

The Microchip PIC16F15356-E/ML is a low-power 8-bit PIC16 microcontroller from the PIC16(L)F153xx family, built around an enhanced mid-range core with 32 MHz operation, 28 KB Flash program memory and 2 KB SRAM, housed in a 28-pin QFN (6x6 mm) package with exposed thermal pad. The device combines eXtreme Low-Power (XLP) technology with Intelligent Analog and Core Independent Peripherals (CIPs), making it suitable for a wide range of battery-powered and sensor-interface designs. An 8-bit microcontroller (MCU) is a compact processor on a single integrated circuit containing a CPU, RAM, Flash program memory, and configurable peripherals. PIC microcontrollers use a Harvard RISC architecture optimized for deterministic interrupt response and low power. The PIC16F153xx family specifically extends the mid-range core with peripheral-rich features for mixed-signal embedded designs, positioning this part at the high end of Microchip's 8-bit portfolio for general-purpose applications. Key features include four 10-bit PWM channels, a 5-bit and 10-bit DAC, comparators with selectable references, a 10-bit ADC, Complementary Waveform Generator (CWG), four Configurable Logic Cells (CLC), and dual EUSART plus SPI/I2C interfaces. These integrated CIPs enable complex waveform, logic, and signal-chain functions without CPU intervention, reducing code size and power consumption. The architecture pairs the enhanced mid-range core (49 instructions, 16-bit instruction width) with nanoWatt XLP sleep modes supporting currents below 1 microamp, plus peripheral module disable to shut down unused peripherals and further reduce active power. Internal 32 MHz and 32 kHz oscillators eliminate external crystal cost in many designs. Typical applications include low-power IoT sensor nodes, home automation controllers, consumer appliance front panels, battery-powered instrumentation, LED lighting control, and industrial sensor interfaces. The wide operating voltage range and rich analog peripherals suit mixed-signal designs where the MCU must both read sensors and drive actuators. When designing with this device, take advantage of the CWG, CLC, and PWM peripherals to offload repetitive tasks from the CPU and minimize active time. Use the nanoWatt XLP sleep modes with peripheral interrupt wake-up to maximize battery life, and verify the QFN thermal pad is soldered to a sufficient copper area for thermal performance under full peripheral load. This page synthesizes distributor pricing, drop-in pin-compatible alternatives within the PIC16F153xx family, and practical design notes that complement the manufacturer datasheet for sourcing and engineering decisions.

Devis Contact
PIC16F15356-E/MX - 28KB Flash 8-bit MCU, 28-UQFN | Microchip
PIC16F15356-E/MX

PIC16F15356-E/MX - 28KB Flash 8-bit MCU, 28-UQFN | Microchip

The Microchip Technology PIC16F15356-E/MX is an 8-bit PIC microcontroller featuring 28KB Flash program memory, 2KB SRAM, and a 32 MHz internal oscillator, housed in a 28-pin UQFN package with the -E extended temperature grade (-40C to +125C). It belongs to the PIC16(L)F153xx family that integrates Intelligent Analog peripherals, Core Independent Peripherals (CIPs), and eXtreme Low-Power (XLP) technology. An 8-bit microcontroller (MCU) is a single-chip computer that combines an 8-bit CPU core, program memory (Flash), data memory (RAM), and integrated peripherals such as timers, ADC, communication interfaces, and GPIO. The PIC16 family uses Microchip's enhanced mid-range RISC architecture with a 14-bit instruction word, providing deterministic interrupt response and simple C-friendly instruction set. Within the broader semiconductor hierarchy, PIC16 sits under Microcontrollers -> Integrated Circuits -> Semiconductors. Key features of the PIC16F15356-E/MX include four 10-bit PWM modules with Complementary Waveform Generator (CWG), a 5-bit DAC, a comparator, Configurable Logic Cells (CLC) for hardware state-machine glue logic, and dual EUSART with SPI and I2C support. The 10-bit ADC delivers up to 17 channels depending on package, and the device operates from 2.3V to 5.5V with XLP idle currents as low as 50 nA typical, making it well-suited for battery-backed sensor nodes. The architecture uses a modified Harvard bus with separate program and data paths, 16-level hardware stack, and 31 interrupt sources with vectored priority. The CIPs (CLC, CWG, NCO) execute logic and waveform tasks without CPU intervention, freeing the core for application code. The device also supports an on-board 32 MHz high-frequency internal oscillator and a 32 kHz low-frequency oscillator for accurate timing without external crystals. Typical applications include low-power IoT sensor nodes, home automation controllers, LED lighting drivers with CWG-based dimming, battery-powered medical wearables, automotive body electronics (with the -MV automotive grade variant), and industrial HMI panels. The combination of CIPs and XLP makes it especially attractive in designs that previously required a 32-bit MCU. When designing with this part, place the VCAP pin decoupling capacitor (typically 0.1 uF ceramic) as close as possible to the IC and follow Microchip's PIC16F153xx PCB layout guidelines. The UQFN package requires thermal pad soldering per IPC-7351 land pattern recommendations. This page consolidates distributor pricing, drop-in alternative cross-references, and practical design notes that are not found in a single source on the manufacturer datasheet, helping procurement and design engineers evaluate the PIC16F15356-E/MX in one place.

Devis Contact
PIC16F15356-E/SO - 28KB Flash 8-bit MCU 32MHz SOIC-28 | Microchip
PIC16F15356-E/SO

PIC16F15356-E/SO - 28KB Flash 8-bit MCU 32MHz SOIC-28 | Microchip

The Microchip PIC16F15356-E/SO is an 8-bit PIC microcontroller in the PIC16F153xx family, featuring 28KB of Flash program memory, 2KB of RAM, and a 32 MHz internal oscillator, housed in a 28-pin SOIC (300 mil) package. It integrates a rich set of Core Independent Peripherals (CIPs) including 4 PWM modules, a 10-bit ADC with Computation (ADC2), a 5-bit/10-bit DAC, comparators, Complementary Waveform Generator (CWG), 4 Configurable Logic Cells (CLC), 2 EUSART, and SPI/I2C communication peripherals. The '-E' suffix indicates an industrial temperature range of -40C to +125C. An 8-bit microcontroller (MCU) is a small computer on a single integrated circuit containing a CPU, memory (Flash for program, SRAM for data, EEPROM for non-volatile storage), and peripherals. Within the taxonomy of semiconductors, an MCU falls under microcontrollers, which sit between discrete logic ICs and more complex 32-bit microprocessors. PIC microcontrollers use a Modified Harvard RISC architecture and are widely used in embedded control applications where deterministic behavior, low power, and integrated peripherals reduce BOM cost and PCB area. Key specifications of the PIC16F15356-E/SO include 32 MHz maximum CPU clock, 28KB (16K x 14 words) Flash program memory, 2KB RAM, 256 bytes of EEPROM, and up to 25 I/O pins. The device operates from 2.3V to 5.5V VDD, with eXtreme Low-Power (XLP) features such as sleep currents below 50 nA typical. The 10-bit ADC supports up to 24 channels depending on package, and the integrated 5-bit DAC enables set-point generation without external components. The PIC16F15356 uses a RISC-based 8-bit core with a hardware multiplier and single-cycle instruction execution at 32 MHz. The CIPs (CLC, CWG, NCO, PWM) execute state-machine operations independently of the CPU, offloading real-time tasks and reducing firmware complexity. eXtreme Low-Power (XLP) technology with nanoWatt XLP and Deep Sleep modes allows battery-powered applications to operate for years on a single cell. The 28-pin SOIC package provides an easy-to-prototype footprint with 0.300 inch body width compatible with hand-soldering and standard development boards. Typical applications include IoT sensor nodes, home appliances, motor control (BLDC, stepper, brushed DC), LED lighting controllers, industrial sensor interfaces, battery-powered instruments, and automotive body electronics (non-safety). It is a common choice as a general-purpose MCU when designers need a balance of analog peripherals, communication interfaces, and low power consumption. When designing with the PIC16F15356-E/SO, ensure that the ICSP/PGD/PGC programming pins are accessible for in-circuit programming, decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of the package, and respect the VDD ramp requirements (50 us minimum rise time) for proper Power-on Reset behavior. Use Microchip's MPLAB X IDE and XC8 compiler for firmware development. This page synthesizes verified distributor pricing, pin-compatible drop-in alternatives, and practical design notes not aggregated on any single distributor page.

Devis Contact
PIC16F15356-E/SP - 8-bit 32MHz 28KB Flash MCU | Microchip
PIC16F15356-E/SP

PIC16F15356-E/SP - 8-bit 32MHz 28KB Flash MCU | Microchip

The Microchip Technology PIC16F15356-E/SP is an 8-bit PIC microcontroller featuring 28KB of Flash program memory, 2KB of RAM, and a maximum CPU clock of 32MHz, packaged in a 28-pin SPDIP (0.300 inch / 7.62mm body) through-hole form factor. It integrates Core Independent Peripherals (CIPs) including four Configurable Logic Cells (CLCs), Complementary Waveform Generator (CWG), 4 PWMs, 2 EUSARTs, SPI/I2C, plus analog blocks such as a 10-bit ADC, 5-bit DAC, and comparator, delivering the Intelligent Analog and CIP combination that defines the PIC16F153xx family. What is a PIC XLP microcontroller? A PIC XLP (eXtreme Low-Power) microcontroller is an 8-bit CMOS MCU family from Microchip Technology engineered for battery-powered and energy-harvesting applications. PIC16F153xx devices sit in the broader PIC MCU taxonomy: 8-bit MCU -> PIC16 family -> enhanced mid-range core -> PIC16F153xx sub-family with CIP and Intelligent Analog integration. The XLP designation indicates the part supports sleep currents in the nanoamp range, making it suitable for applications where quiescent draw dominates battery life. Key features of the PIC16F15356-E/SP include 28KB Flash (16K x 14 words), 2KB SRAM, 256 bytes of EEPROM, four 16-bit PWMs with Complementary Waveform Generator, four Configurable Logic Cells (CLCs) implementing user-defined digital glue logic in hardware, and a peripheral pin select (PPS) mapping scheme that lets designers remap digital peripherals to almost any I/O pin. The device operates from 2.3V to 5.5V across an industrial temperature range of -40C to +125C, supports ICD debugging, and offers a 10-bit ADC with up to 24 channels depending on package. The integrated 5-bit DAC and comparator enable closed-loop analog control without external components. Technical depth: the PIC16F15356 uses the enhanced mid-range 8-bit core with a hardware multiplier and 49 instructions, executes most instructions in one instruction cycle (4 clock cycles), and supports interrupt prioritization with hardware context save/restore. The instruction set is upward compatible with the PIC10/12/16 baseline and enhanced mid-range cores, easing migration from older PIC16 designs. PPS and CLCs effectively replace discrete logic ICs, reducing BOM cost and PCB area. Typical applications include home appliances, industrial sensor nodes, low-power IoT endpoints, motor control (especially with the CWG and 4x PWM block), and battery-powered instruments running from 2x AA cells or coin cells. The 28-pin SPDIP package is preferred for hand prototyping, hobbyist builds, and through-hole manufacturing where wave soldering is required. Design consideration: when migrating from older PIC16F1xxx designs, ensure the PPS register initialization is performed early in the firmware; without PPS unlock sequence the peripherals default to legacy pin assignments and code written assuming PPS flexibility may not function. For low-power designs, switch to sleep and use the device's RTCC, IOC, or CLC wake sources rather than polling loops. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, with cross-references to PIC16F15355/15354 and PIC16F15256 SPDIP variants in the same family.

Devis Contact
PIC16F15356-E/SS - 8-bit 32MHz 28KB Flash MCU | Microchip
PIC16F15356-E/SS

PIC16F15356-E/SS - 8-bit 32MHz 28KB Flash MCU | Microchip

The Microchip Technology PIC16F15356-E/SS is an 8-bit PIC16 microcontroller running at up to 32 MHz with 28 KB of Flash program memory (16K x 14 words) and 2 KB SRAM, packaged in a 28-pin SSOP (SS) form factor. It belongs to the PIC16(L)F153xx family and combines eXtreme Low-Power (XLP) technology with Core Independent Peripherals (CIPs) for energy-efficient embedded designs. The device operates from 1.8 V to 5.5 V across the industrial -40C to +125C temperature range with the -E (Extended) suffix. An 8-bit microcontroller (MCU) is a small computer-on-a-chip built around an 8-bit data path. Within the semiconductor taxonomy, an MCU sits under microcontroller -> embedded processor -> digital IC. PIC16 parts use a Harvard RISC architecture with a 14-bit instruction word optimized for deterministic, low-power control. The CIPs approach lets peripherals (CLC, CWG, NCO, PWM) operate without CPU intervention, lowering active power and freeing the core for application logic. Key differentiating features include four Configurable Logic Cells (CLC), a Complementary Waveform Generator (CWG), two 10-bit DACs, two 10-bit ADCs up to 43 channels, a Numerically Controlled Oscillator (NCO), four 10-bit PWMs, two analog comparators, and 2x EUSART plus 2x MSSP (SPI/I2C) serial interfaces. The XLP idle/doze currents enable battery lifetimes measured in years on coin cells. The PIC16F15356-E/SS is pin-compatible with much of the PIC16F153xx family (e.g., PIC16F15355-E/SS with 14 KB Flash and PIC16F15354-E/SS with 7 KB Flash), enabling firmware migration across memory tiers without PCB rework. Memory is partitioned for bootloader-over-the-air updates and field firmware upgrades, a common requirement in connected sensor nodes. Typical applications include IoT sensor nodes, battery-powered instrumentation, LED lighting controllers, low-cost motor control (small fans, solenoids), home appliance user-interface boards, and automotive body electronics (with the -VAO automotive grade variant). Designers choose this device when they need ample Flash for protocol stacks (BLE through external radio, LoRa, Modbus) plus rich analog peripherals for sensor fusion. When designing with this part, keep in mind that SSOP-28 has limited thermal dissipation at high ambient temperatures. Place a 0.1 uF decoupling capacitor within 2 mm of VDD with a 10 uF bulk capacitor on the supply rail, and route MCLR through a 10 k pull-up. Programming/debug uses ICSP via the PGC/PGD pins, which should be reserved for test access. This page synthesizes distributor pricing, drop-in same-package alternatives, design notes, and datasheet pinout data into a single engineering reference for the PIC16F15356-E/SS.

Devis Contact
PIC16F15356-I/ML - 8-Bit 32MHz MCU, 28KB Flash, 28-QFN | Microchip
PIC16F15356-I/ML

PIC16F15356-I/ML - 8-Bit 32MHz MCU, 28KB Flash, 28-QFN | Microchip

The Microchip Technology PIC16F15356-I/ML is an 8-bit RISC microcontroller from the PIC16F153XX family that integrates 28KB of FLASH program memory, 2KB of RAM, and runs at up to 32MHz. Housed in a 28-pin QFN (6x6mm) package, it combines eXtreme Low-Power (XLP) technology with Core Independent Peripherals (CIPs) and Intelligent Analog blocks for low-power and general-purpose embedded designs. The industrial temperature grade (-40C to +85C) makes it suitable for harsh-environment designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, integrating a CPU, non-volatile program memory (FLASH), volatile data memory (RAM), timers, communication peripherals, and interrupt logic on one silicon die. Within the broader taxonomy, an 8-bit MCU belongs to the microcontroller category, which itself is a subfamily of microprocessors and computing ICs, ultimately classified as integrated circuits (semiconductors). The 8-bit architecture remains dominant in cost- and power-sensitive applications where 32-bit performance is unnecessary. Key features of the PIC16F15356-I/ML include four 10-bit PWM outputs, a 10-bit ADC, a 5-bit/8-bit DAC, comparators, four Configurable Logic Cells (CLC), a Complementary Waveform Generator (CWG), and dual EUSART plus SPI/I2C interfaces. The device supports up to 28KB of FLASH (16K x 14 words) and 2KB RAM, offering headroom for applications requiring larger state machines or wireless protocol stacks. Architecturally, the PIC16F15356 uses Microchip's enhanced mid-range core with a 14-bit instruction word and a hardware stack, providing deterministic interrupt latency and a single-cycle instruction execution path. The XLP technology targets nanowatt-level sleep currents, making battery-powered applications feasible. Typical applications include IoT sensor nodes, low-power wireless remote controls, consumer appliances, LED lighting controllers, battery management systems, and small industrial automation controllers. The combination of CWG, CLC, and multiple PWM channels makes it well-suited for motor-control and power-conversion control loops. When designing with this MCU, prioritize the XLP sleep modes for battery applications and reserve at least one CLC for glue logic to reduce external component count. Use the on-board 10-bit ADC with internal FVR reference to minimize external precision components. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes that go beyond the manufacturer datasheet summary.

Devis Contact
PIC16F15356-I/MV - 8-bit XLP MCU 32MHz 28KB Flash | Microchip
PIC16F15356-I/MV

PIC16F15356-I/MV - 8-bit XLP MCU 32MHz 28KB Flash | Microchip

The Microchip Technology PIC16F15356-I/MV is an 8-bit PIC microcontroller from the PIC16F153xx family, offering 32MHz CPU performance, 28KB Flash program memory, 2KB SRAM, and 256B EEPROM, housed in a compact 28-pin UQFN (MV) 4x4mm package. The device features an integrated 5-bit DAC, a 10-bit ADC with up to 17 channels, four PWM modules, two comparators, and four Configurable Logic Cells (CLC) for hardware-based custom peripherals. An 8-bit microcontroller (MCU) is a compact processor that integrates CPU, RAM, non-volatile program memory, and peripherals onto a single silicon die. Within the taxonomy of embedded computing, an 8-bit MCU belongs to the microcontrollers -> integrated circuits -> semiconductors hierarchy. The "PIC" architecture uses a modified Harvard RISC instruction set with separate program and data buses, optimized for deterministic real-time control. The "XLP" (eXtreme Low-Power) family specifically targets battery-powered applications with sub-uA sleep currents and rapid wake-up times. Key features include Core Independent Peripherals (CIPs) that operate without CPU intervention, two EUSART/SPI/I2C communication interfaces, a Complementary Waveform Generator (CWG), and an operating voltage range of 2.3V to 5.5V. The wide voltage range and integrated peripherals reduce external component count, enabling smaller PCB designs. The device also includes a programmable brown-out reset (BOR), watchdog timer, and on-chip debugging via ICD. Architecturally, the PIC16F15356 uses Microchip's mid-range 8-bit core enhanced with hardware multiply, peripheral pin select (PPS) for flexible signal routing, and a 32-level hardware stack. The PPS feature is particularly valuable because it allows most digital peripheral pins to be remapped to multiple I/O pads, simplifying PCB layout and BOM changes late in the design cycle. Typical applications include IoT sensor nodes, home automation controls, low-power wireless sensor hubs, LED lighting controllers, battery-powered consumer devices, and industrial sensor interface modules. Its low-power modes and rich analog peripherals make it ideal for energy-harvesting applications. When designing with this device, prioritize decoupling capacitor placement near VDD pins and follow the trace routing guidelines for the analog section to minimize ADC noise. The PPS flexibility allows late-stage pin reassignment without PCB respins. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical low-power design notes that complement the official datasheet and reference manual.

Devis Contact
PIC16F15356-I/MX - 8-bit MCU, 28KB Flash, 2KB RAM | Microchip
PIC16F15356-I/MX

PIC16F15356-I/MX - 8-bit MCU, 28KB Flash, 2KB RAM | Microchip

The Microchip Technology PIC16F15356-I/MX is an 8-bit PIC microcontroller with 28KB Flash program memory and 2KB SRAM, housed in a 28-pin UQFN (MX) package with eXtreme Low-Power (XLP) technology. Operating from 2.3V to 5.5V, it integrates Intelligent Analog peripherals, Core Independent Peripherals (CIPs), and communication interfaces including 2x EUSART, SPI, and I2C, making it a versatile mid-range MCU for low-power embedded designs. A PIC microcontroller is an 8-bit Harvard-architecture RISC processor from Microchip Technology, widely used in embedded systems for sensing, control, and human-machine interface tasks. PIC MCUs sit in the broader hierarchy: microcontroller -> embedded processor -> semiconductor IC. The PIC16F15356 belongs to the PIC16(L)F153xx mid-range family which adds Core Independent Peripherals (CIPs) that execute complex timing and logic without CPU intervention, freeing the core for application code. Key features of the PIC16F15356-I/MX include 4x 10-bit PWMs, a hardware Comparator, a 5-bit/8-bit DAC, a 10-bit ADC with Computation, a Complementary Waveform Generator (CWG), 4x Configurable Logic Cells (CLC), and 2x EUSART plus SPI/I2C interfaces. The XLP technology delivers nanoWatt sleep currents below 100 nA typical, enabling multi-year battery life in IoT and remote-sensor applications. Architecturally, the PIC16F15356 uses a 32 MHz internal oscillator (8 MIPS at 4x PLL) and supports up to 28 I/O pins with interrupt-on-change capability. The integrated CIPs (CLC, NCO, CWG, PWM, ADC) are interconnected via a fabric that allows hardware-triggered sequencing, effectively turning the chip into a small state machine without CPU code. Typical applications include battery-powered IoT sensor nodes, home automation controllers, low-power remote controls, LED lighting drivers, small motor control loops (fans, pumps), and consumer appliances. The combination of 28KB Flash and 2KB RAM comfortably supports state-machine firmware plus a small RTOS or cooperative scheduler. Design tip: select the LF variant (PIC16LF15356) for sub-3V operation and lower sleep current; reserve the F variant (this part) for 5V-tolerant industrial designs. Always engage the Watchdog Timer (WDT) and Brown-out Reset (BOR) for unattended deployments. This page synthesizes distributor pricing, drop-in package alternatives, and practical XLP design notes that are not consolidated in any single datasheet, complementing the manufacturer documentation with sourcing and cross-reference intelligence.

Devis Contact
PIC16F15356-I/SO - 8-bit MCU 28KB Flash XLP 32MHz SOIC-28
PIC16F15356-I/SO

PIC16F15356-I/SO - 8-bit MCU 28KB Flash XLP 32MHz SOIC-28

The Microchip Technology PIC16F15356-I/SO is an 8-bit PIC16F microcontroller from the PIC16(L)F153XX family, featuring 28KB (16K x 14 words) of Flash program memory, 2KB of RAM, and operating at up to 32MHz from a 3V supply in a 28-pin SOIC package. According to the Microchip product page, the device integrates Intelligent Analog peripherals (ADC, DAC, comparator), Core Independent Peripherals (CIPs) including CLC (Configurable Logic Cell) and CWG (Complement Waveform Generator), and 4x PWM channels, combined with eXtreme Low-Power (XLP) technology for battery-friendly designs. An 8-bit microcontroller (MCU) is a small, self-contained computing IC that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), peripherals (timers, ADC, communication), and I/O pins on a single die. PIC16F MCUs sit in Microchip's mid-range 8-bit portfolio, positioned between the smaller PIC10/12/16 baseline families and the higher-pin PIC18/dsPIC lines. The PIC16F15356 extends this hierarchy with Core Independent Peripherals that offload tasks from the CPU, freeing it for application logic. Typical roles include appliance controllers, IoT sensor nodes, and human-machine interface (HMI) front-ends. Key features of the PIC16F15356 include 28KB Flash, 2KB RAM, 4x 10-bit PWMs, an on-chip 5-bit/8-bit DAC, a 10-bit ADC with computation, two EUSART peripherals supporting SPI and I2C (asynchronous and synchronous serial), four Configurable Logic Cells (CLC) for hardware state-machine logic, and a Complementary Waveform Generator (CWG). The XLP technology enables nanoWatt sleep currents below 100 nA in deep sleep, making the part suitable for energy-harvesting or battery-powered products with multi-year life requirements. Architecturally, the PIC16F15356 uses Microchip's enhanced mid-range (XLP) core with a 14-bit instruction word, a hardware multiplier, and a single-cycle instruction execution. The combination of CIPs (CLC, CWG, NCO, DSM) plus Intelligent Analog (ADC with computation, DAC, comparator with hysteresis) lets designers replace discrete analog/digital glue with on-chip silicon, shrinking BOM cost and PCB area. The device is supported by MPLAB X IDE, XC8 compilers, and the MPLAB Code Configurator (MCC). Typical applications for this part include low-power IoT sensor nodes, battery-powered home automation devices (thermostats, door sensors), white-goods and small-appliance controls (coffee makers, fans), LED lighting drivers, automotive body and accessory modules (with the -Q automotive variant), industrial sensor conditioning, and consumer Human-Machine Interface (HMI) boards that need PWM-driven indicators and serial communication. The wide 1.8V-5.5V operating range (on the LF version) simplifies designs powered directly from 2x AA cells or USB 5V rails. When designing with this part, plan I/O mapping carefully: SOIC-28 has 28 pins, of which several are dedicated to power, ground, MCLR, and programming/debug (ICSPCLK/ICSPDAT). Reserve PGC/PGD for in-circuit serial programming access. Decouple VDD with a 100 nF ceramic close to the pin and provide a 10 µF bulk cap if the load is dynamic; follow the datasheet "Basic Connection Reference Design" exactly. The XLP sleep modes deliver their lowest current only when unused peripherals are gated off - read the "Sleep Mode" section to avoid peripheral leakage. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, drop-in 28-SOIC alternatives drawn from the same PIC16F153XX family, and practical design notes that go beyond the bare datasheet bullet list, giving the engineer a single place to validate fit, sourcing, and PCB reuse.

Devis Contact
PIC16F15356-I/SP - 28KB Flash 8-Bit MCU | Microchip | DIP-28
PIC16F15356-I/SP

PIC16F15356-I/SP - 28KB Flash 8-Bit MCU | Microchip | DIP-28

The Microchip PIC16F15356-I/SP is an 8-bit PIC microcontroller in the PIC16F153xx family, featuring 28 KB of Flash program memory (16K x 14 words), 2 KB of SRAM, and a 32 MHz internal oscillator, all integrated in a 28-pin SPDIP (0.300 inch, 7.62 mm) through-hole package. It integrates essential peripherals such as a 10-bit ADC with computation, two 5-bit and 10-bit DACs, four PWM modules, comparators, CWG (Complementary Waveform Generator), four CLC (Configurable Logic Cell) blocks, two EUSART, SPI, and I2C. A microcontroller (MCU) is a single-chip computer that contains a processor core, program and data memory, and programmable I/O peripherals. The PIC16 family is an 8-bit RISC architecture within Microchip's broader portfolio of microcontrollers (MCU -> 8-bit MCU -> PIC16 family -> PIC16F153xx family -> semiconductor). PIC microcontrollers are widely used in embedded control because of their deterministic instruction set, low power consumption, and rich peripheral integration that minimizes external component count. Key features of the PIC16F15356 include Core Independent Peripherals (CIPs) that offload tasks from the CPU, eXtreme Low-Power (XLP) technology for battery-powered applications, and Intelligent Analog peripherals. The device supports a wide operating voltage range, multiple communication interfaces, and provides flexible clock options including a 32 MHz high-speed internal oscillator. The 'I' suffix indicates the industrial temperature grade of -40C to +85C, and the '/SP' suffix designates the 28-pin SPDIP package. Typical applications for the PIC16F15356-I/SP include IoT sensor nodes, home appliances, LED lighting controllers, motor control loops, battery-powered instruments, and consumer electronics that require low-power operation combined with mixed-signal analog and digital I/O. Its 28 KB Flash is sufficient for protocol stacks such as MODBUS, LIN slave, and small Bluetooth Low Energy command libraries when paired with an external transceiver. When designing with this part, ensure decoupling capacitors of 0.1 uF are placed within 5 mm of each power pin. For applications requiring more memory, consider PIC16F15376 in the same family which offers 56 KB Flash in a compatible footprint. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Devis Contact
PIC16F15356-I/SS - 8-Bit 32MHz 28KB Flash MCU | Microchip
PIC16F15356-I/SS

PIC16F15356-I/SS - 8-Bit 32MHz 28KB Flash MCU | Microchip

The Microchip Technology PIC16F15356-I/SS is an 8-bit PIC microcontroller from the PIC16F153XX family, featuring 28KB of Flash program memory and operating at up to 32 MHz in a 28-pin SSOP package. The device integrates Intelligent Analog peripherals, Core Independent Peripherals (CIPs), and eXtreme Low-Power (XLP) technology for energy-efficient embedded applications. A microcontroller (MCU) is an integrated circuit containing a CPU, memory (Flash, RAM, EEPROM), and configurable peripherals on a single die. The 8-bit PIC family uses a Harvard RISC architecture optimized for deterministic real-time control, distinguishing it from 32-bit Cortex-M parts by lower cost, simpler toolchain, and lower active power in many duty-cycled applications. Within the hierarchy, PIC16F15356 belongs to microcontrollers > 8-bit MCUs > PIC16 family > PIC16F153xx sub-family. Key features include 2KB RAM, 4 PWMs, a hardware Comparator, 5-bit/10-bit DAC, 10-bit ADC, Complementary Waveform Generator (CWG), 4 Configurable Logic Cells (CLC), 2 EUSART, SPI/I2C interfaces, and 16 KB of Flash usable for non-volatile data via Memory Access Partition (MAP). The wide 2.3V to 5.5V operating range, low-power XLP modes (down to nanoWatt), and industrial temperature rating of -40C to +85C make it suitable for battery-powered and harsh-environment deployments. Architecturally, the PIC16F15356 uses the enhanced mid-range 8-bit core with a 14-bit instruction word and hardware multiply/divide, providing single-cycle I/O access and predictable interrupt latency. CIPs like CLC and CWG execute logic and waveform generation autonomously without CPU intervention, freeing the core for higher-level tasks and reducing firmware complexity. Typical applications include IoT sensor nodes, home appliances, motor control signal conditioning, LED lighting controllers, and battery-powered instrumentation. The wide peripheral set makes it especially well suited for low-cost mixed-signal products where the analog front-end and logic glue must live alongside the control loop. When designing with this MCU, allocate at least one CLC for wake-up logic to maximize XLP savings, and ensure the configuration bits match the chosen debug mode (MPLAB ICD) to avoid lock-out. The CWG must be tied to a timer source for proper dead-band control in half-bridge drive. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design considerations not found in the manufacturer datasheet alone, optimized for engineers evaluating PIC16F15356-I/SS for new designs or replacement sourcing.

Devis Contact
PIC16F15356T-E/SSVAO - 28KB Flash 8-bit MCU | Microchip | Auto Grade
PIC16F15356T-E/SSVAO

PIC16F15356T-E/SSVAO - 28KB Flash 8-bit MCU | Microchip | Auto Grade

The Microchip Technology PIC16F15356T-E/SSVAO is an 8-bit PIC microcontroller from the PIC16F153XX family with 28 KB Flash, 2 KB RAM, and 26 I/O pins, housed in a 28-pin SSOP (0.209", 5.30mm) package. It integrates CIPs (Core Independent Peripherals), Intelligent Analog including a 10-bit DAC, comparators, ADC, CWG, and four 10-bit PWMs, plus 2x EUSART and 2x SPI/I2C communication. The 8-bit core runs up to 32 MHz and is qualified to AEC-Q100 for automotive applications. The 'T' suffix denotes tape-and-reel packaging and 'VAO' marks the automotive-grade temperature range. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory, working RAM, and a rich mix of analog/digital peripherals. Within the broader taxonomy, this part is a microcontroller -> embedded controller -> semiconductor device. 8-bit PIC MCUs remain popular for cost-sensitive, low-power, deterministic control tasks such as sensor reading, motor timing, and user-interface handling where 32-bit processing headroom is unnecessary. Compared with discrete logic or ASIC implementations, an MCU shrinks BOM count, simplifies firmware upgrades, and reduces PCB area. Key features include 28 KB self-programmable Flash, 2 KB SRAM, 256 B EEPROM, 32 MHz internal oscillator, four 10-bit PWMs with Complementary Waveform Generator (CWG), a 5-bit DAC and 10-bit ADC with computation, two comparators, two EUSART, two SPI/I2C, and the eXtreme Low-Power (XLP) Sleep current. CIPs such as the CWG and NCO let designers implement closed-loop control in hardware without CPU load. The device is built on an enhanced mid-range 8-bit core with a 14-bit instruction word and hardware multiplier, supporting up to 16 K x 14 Flash words. The integrated Core Independent Peripherals offload timing-critical tasks, lowering firmware complexity and deterministic latency. Intelligent Analog features include a 10-bit ADC with automated averaging and threshold detection, ideal for sensor signal chains. Typical applications include automotive body controllers, sensor signal conditioning, automotive LED lighting, HVAC fan control, and home appliance user-interface boards. AEC-Q100 qualification makes the part well-suited to dashboard subsystems, BCMs, and lighting drivers. When designing with this MCU, observe the 28-pin SSOP layout constraints: route the analog AVdd/AVss traces carefully, place the decoupling 100 nF capacitor within 5 mm of each supply pin, and use the internal 32 MHz HFINTOSC to minimize external oscillator cost. This page synthesizes distributor pricing for the automotive-grade reel variant, drop-in alternatives from the same Microchip family, and PCB-level design notes not collected in any single manufacturer document.

Devis Contact