Circuits intégrés

Sous-catégories

📁 ADC/DAC 3 100+ produits 📁 CI amplificateurs 1 700+ produits 📁 Codecs audio 18 produits 📁 CI audio 2 produits 📁 Horloge et synchronisation 640+ produits 📁 Comparator ICs 1 produits 📁 DSP 1 100+ produits 📁 CI d'acquisition de données 2 produits 📁 Potentiomètres numériques 4 produits 📁 Pilotes et contrôleurs d'affichage 1 produits 📁 FPGA & CPLD 7 100+ produits 📁 Circuits intégrés d'interface 3 100+ produits 📁 Pilotes de LED 1 produits 📁 CI logiques 450+ produits 📁 CI mémoire 870+ produits 📁 Microcontrôleurs 20 000+ produits 📁 Microprocesseurs 4 produits 📁 Pilotes de moteur 1 produits 📁 Autres 1 produits 📁 Sensor and Detector Interfaces 1 produits 📁 Circuits intégrés spécialisés 15 produits 📁 CI vidéo 13 produits

Produits (38 000+)

PIC16F1615-I/P - 8-Bit 32MHz MCU 14KB Flash 14-PDIP | Microchip
PIC16F1615-I/P

PIC16F1615-I/P - 8-Bit 32MHz MCU 14KB Flash 14-PDIP | Microchip

The Microchip Technology PIC16F1615-I/P is a low-pin-count 8-bit PIC microcontroller from the PIC® XLP™ 16F family with functional-safety (FuSa) features, delivering 32 MHz CPU performance, 14 KB of Flash program memory and 1 KB of RAM in a 14-pin PDIP through-hole package. It targets embedded control of small motors and general-purpose applications with on-chip peripherals including a 10-bit ADC, CCP, 24-bit SMT (Signal Measurement Timer), Zero Cross Detection and multiple PWM/CCP channels. A microcontroller (MCU) is an integrated circuit that combines a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a range of peripheral blocks (ADC, timers, communication ports) on a single die. Within the broader semiconductor taxonomy it sits under: microcontroller -> 8-bit microcontroller -> PIC16 family -> PIC16F161X sub-family -> power management and motor/lighting control application segment. The PIC16F1615 in particular belongs to the PIC16(L)F161X family that introduced 24-bit SMT and Zero Cross Detect for solid-state relay, TRIAC and BLDC-type control. Key features of the PIC16F1615-I/P include: 32 MHz internal oscillator, 14 KB Flash with self-programmable support, 1 KB RAM, 256 B EEPROM, 10-bit ADC with multiple channels, 5-/8-bit DAC, configurable logic cell (CLC), Complementary Waveform Generator (CWG), Zero Cross Detection (ZCD), 24-bit Signal Measurement Timer (SMT), CCP modules, EUSART, I2C/SPI, and 12 I/O pins on the 14-pin PDIP. The eXtreme Low Power (XLP) technology delivers <50 nA typical sleep current, making it suitable for battery-powered designs. The device supports a wide operating voltage of 2.5 V to 5.5 V (PIC16F1615) or 1.8 V to 3.6 V (PIC16LF1615). Architecturally, the device uses Microchip's enhanced mid-range 8-bit RISC core with a 14-bit instruction word, 8-level hardware stack and 49 instruction set, providing 16 MIPS throughput at 32 MHz. The integrated CWG and ZCD peripherals allow direct generation of complementary PWM outputs with programmable dead-band and zero-voltage switching, which removes the need for an external gate-driver in many motor/lighting designs. CIPs (Core Independent Peripherals) like CLC, NCO and SMT let signal conditioning run without CPU intervention, freeing the core for supervisory tasks. Typical applications include low-voltage motor control (BLDC, brushed DC), solid-state lighting and TRIAC dimming, sensor signal conditioning with CLC, low-power battery-powered IoT nodes, and consumer / industrial control where small pin count and FuSa-class hardware documentation are required. The PIC16F1615 family is also well-suited as a functional-safety MCU in household appliances and white goods (IEC 60730 class B support documentation is available from Microchip). When designing with this MCU, ensure the supply decoupling network uses a 100 nF ceramic capacitor within a few millimetres of the VDD pin, optionally with a bulk 10 uF tantalum or aluminium electrolytic cap on the main rail. Leave MCLR pulled up via a 10 kohm resistor for normal operation, or tie directly to VDD if not used. For ADC accuracy, keep analog traces short and away from switching nodes like the CWG outputs. This page synthesises distributor pricing, drop-in alternatives, and practical design notes beyond what the manufacturer datasheet alone provides, helping engineers compare options and make a sourcing decision quickly.

Devis Contact
PIC16F1615-I/SL - 8-Bit 32MHz 14KB Flash MCU | Microchip
PIC16F1615-I/SL

PIC16F1615-I/SL - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1615-I/SL is an 8-bit RISC microcontroller featuring 14KB (8K x 14 words) of Flash program memory, 1KB of data RAM, and a maximum 32MHz CPU clock, housed in a 14-pin SOIC (SL) package with industrial -40C to +85C temperature rating. The part belongs to the PIC16(L)F161X family and integrates Core Independent Peripherals (CIPs) such as a 24-bit Signal Measurement Timer (SMT), Zero Cross Detection (ZCD), Configurable Logic Cell (CLC), and Complementary Waveform Generator (CWG), alongside Intelligent Analog modules including a 10-bit ADC with Computation and two comparators. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data bus and a RISC or CISC instruction set, integrating CPU, program memory (Flash/ROM), data memory (RAM), non-volatile EEPROM, timers, communication peripherals (UART, SPI, I2C), and digital/analog I/O. The 8-bit MCU belongs to the broader hierarchy of microcontroller -> embedded processor -> semiconductor, and is widely used in cost-sensitive, low-power, deterministic control applications. Microchip's PIC16 family is recognized for its deterministic architecture, low power consumption (XLP eXtreme Low Power), and ease of use with the MPLAB X IDE and XC8 compiler toolchain. Key features of the PIC16F1615 include 12 I/O pins, two PWM modules, 11 timers, an EUSART and MSSP for serial communication, 10-bit ADC, and Functional Safety (FuSa) support for IEC 61508 SIL-2 capable designs. The SL suffix indicates the 14-pin SOIC package, 1.75mm nominal height, 3.90mm body width, suitable for standard 0.1-inch pitch PCB layouts. The device operates from 2.3V to 5.5V across the industrial temperature range. Architecturally, the PIC16F1615 uses Microchip's enhanced mid-range core with hardware multiply support and a 14-bit instruction word. On-chip CIPs (CLC, CWG, SMT, ZCD) let designers implement complex signal conditioning, waveform generation, and timing measurements in hardware without CPU involvement, reducing firmware complexity and power consumption. The 24-bit SMT enables sub-microsecond timing resolution for energy metering or motor control feedback. Typical applications include small motor control (BLDC, stepper, brushed DC), LED lighting and constant-current regulation, IoT and battery-powered sensor nodes, home appliances, and functional-safety-embedded industrial controls. Functional Safety (FuSa) variants like this device support SIL-2-capable system designs with diagnostic libraries and FMEDA reports available from Microchip. When designing with this MCU, leave unused I/O as outputs driven low to minimize power, enable the watchdog timer for SIL applications, and use the CWG peripheral for hardware-driven complementary PWM rather than software bit-banging to reduce jitter. Program the device via In-Circuit Serial Programming (ICSP) using the ICSPCLK/ICSPDAT pins. This page synthesizes distributor pricing, drop-in alternative PIC16F161x family parts, and practical design notes not found on a single manufacturer page.

Devis Contact
PIC16F1615-I/ST - 8-Bit 32MHz MCU 14KB Flash | Microchip
PIC16F1615-I/ST

PIC16F1615-I/ST - 8-Bit 32MHz MCU 14KB Flash | Microchip

The Microchip PIC16F1615-I/ST is an 8-bit PIC® XLP™ 16F microcontroller running at up to 32 MHz, integrating 14 KB (8K x 14) of Flash program memory, 1 KB of SRAM, and a 10-bit A/D converter in a 14-pin TSSOP package. The part carries Microchip's Functional Safety (FuSa) capability and targets low-power embedded control of small motors and general-purpose applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (SRAM), peripherals, and I/O on one silicon die. MCUs sit at the bottom of the embedded compute hierarchy below microprocessors (MPUs) and system-on-chips (SoCs), and are preferred in cost- and power-constrained applications such as sensor nodes, small motor drivers, and human-machine interfaces. The PIC16F1615 belongs to the PIC16F1 enhanced mid-range family and is one of the smallest Flash members in Microchip's eXtreme Low Power (XLP) lineup. Key features include a 10-bit ADC with up to 8 channels, configurable Logic Cell (CLC), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), Zero-Cross Detect (ZCD), 24-bit Signal Measurement Timer (SMT), and CCP/PWM peripherals. The device operates from 2.3 V to 5.5 V across -40 °C to +85 °C and offers sleep currents in the microamp range thanks to the XLP architecture. Core-independent peripherals offload tasks from the CPU, lowering average power and BOM cost. The device is built on an enhanced mid-range 8-bit RISC core with a modified Harvard architecture and 14-bit instruction word. The 32 MHz internal oscillator drives 8 MIPS throughput, with hardware multiplier and interrupt-driven I/O. Each instruction cycle is four oscillator clocks, balancing deterministic interrupt latency with active-mode current draw. Typical applications include small DC motor control, LED lighting drivers, fan control, battery-powered sensor hubs, home appliances, and safety-critical consumer devices that benefit from Functional Safety features. The TSSOP-14 footprint also suits hand-held and space-constrained designs. Designers should plan pin allocation before PCB layout because the 14-pin TSSOP exposes only a limited number of ADC channels and shared peripherals. Configuring the CLC and NCO in MPLAB X IDE allows logic replacement of discrete gates. This page synthesizes distributor pricing, drop-in alternatives within the same 14-TSSOP footprint, and practical design notes not found in the manufacturer datasheet.

Devis Contact
PIC16F1615T-I/JQ - 8-bit 32MHz MCU, 14KB Flash, 16-UQFN | Microchip
PIC16F1615T-I/JQ

PIC16F1615T-I/JQ - 8-bit 32MHz MCU, 14KB Flash, 16-UQFN | Microchip

The Microchip Technology PIC16F1615T-I/JQ is an 8-bit PIC microcontroller from the PIC® XLP™ 16F family with Functional Safety (FuSa) features, integrating 14KB (8K × 14) of Flash program memory, 1KB of RAM, and a 32 MHz internal oscillator in a 16-pin UQFN (4 × 4 mm) package. An 8-bit microcontroller is a single-chip computer built around an 8-bit data path that executes instructions on bytes; it sits within the broader taxonomy of microcontroller -> embedded controller -> semiconductor device, and the PIC16F1615 specifically belongs to Microchip's mid-range PIC16 family optimized for low-power, mixed-signal embedded control of small motors and general-purpose applications in 8/14/20-pin packages. Key features include a 10-bit ADC with multiple channels, Zero-Cross Detection (ZCD), Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Signal Measurement Timer (24-bit SMT), Windowed Watchdog Timer (WWDT), CRC/Memory Scan with hardware acceleration, and eXtreme Low Power (XLP) sleep modes drawing as little as 20 nA. Communication options include I²C, SPI, UART/USART, and LINbus. The PIC16F1615 uses an enhanced mid-range Harvard RISC architecture with a 14-bit instruction word, 49 instructions, and a hardware multiply, providing 8 MIPS at 32 MHz. The integrated 32 MHz high-precision internal oscillator eliminates the external crystal in many designs, while the Functional Safety (FuSa) features target IEC 60730 Class B safety requirements in household appliances and white goods. Typical applications include BLDC/PMSM small-motor commutation, LED lighting drivers with smooth dimming via the CWG module, IoT sensor nodes, household appliance control (washing machines, dishwashers), and battery-powered portable instruments requiring XLP sleep current budgets below 1 µA. When designing with this device, allocate the 16-UQFN footprint with a small thermal pad to the GND plane, follow Microchip's AN 1004 guidelines for UQFN PCB land patterns, and use MPLAB X IDE with the XC8 compiler for firmware development. Always confirm toolchain compatibility before migrating from older PIC16F1xxx devices. This page synthesizes distributor pricing, drop-in alternatives drawn from Microchip's PIC16 family, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC16F1615T-I/ML - 8-Bit MCU, 32MHz, 14KB Flash, 16-QFN | Microchip
PIC16F1615T-I/ML

PIC16F1615T-I/ML - 8-Bit MCU, 32MHz, 14KB Flash, 16-QFN | Microchip

The Microchip Technology PIC16F1615T-I/ML is an 8-bit PIC microcontroller from the PIC® XLP™ 16F family with Functional Safety (FuSa) capability, running at up to 32MHz core clock and integrating 14KB (8K x 14) of Flash program memory in a compact 16-pin QFN (4x4) package. It is supplied in tape-and-reel packaging and operates across the standard industrial temperature range of -40C to +85C, making it suitable for high-volume, surface-mount manufacturing. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and a rich set of peripherals onto one die. The PIC16F1615 belongs to the PIC16F1xxx enhanced mid-range family, which sits above baseline PIC10/12/16 architectures in performance and integration, yet below 16-bit PIC24 and dsPIC devices. Within the broader hierarchy, it is classified as a microcontroller -> embedded processor -> semiconductor device. XLP™ (eXtreme Low Power) denotes Microchip's portfolio of ultra-low-power 8-bit MCUs optimized for battery- and energy-harvesting applications. Key features of the PIC16F1615T-I/ML include an integrated 10-bit Analog-to-Digital Converter (ADC) with multiple channels, a 24-bit Signal Measurement Timer (SMT) for precision time and pulse-based measurements, Capture/Compare/PWM (CCP) peripherals, Zero-Cross Detect (ZCD) and Peripheral Pin Select (PPS) for flexible signal routing. The on-chip Functional Safety (FuSa) features support safety-critical designs targeting IEC 60730 Class B compliance for home appliances and similar regulated markets. The XLP architecture typically delivers deep-sleep currents in the nanoampere range, ideal for always-on applications. Typical applications for the PIC16F1615T-I/ML include small-motor control (BLDC fan, ceiling-fan, pump), consumer appliance control, IoT sensor nodes, LED lighting control with analog dimming, and general-purpose embedded control where 14KB Flash and 1KB RAM are sufficient. The 16-QFN (4x4) package is preferred when PCB area is at a premium and the design needs only 12-14 I/O pins. When designing with this part, budget the I/O count carefully - the 16-QFN package exposes fewer pins than 20- or 28-pin variants of the same family. Plan for an external decoupling network (100nF + bulk capacitor) within 2-3 mm of the VDD pin, and use MPLAB X IDE with the XC8 compiler for firmware development.

Devis Contact
PIC16F1615T-I/SL - 8-Bit MCU, 14KB Flash, 32MHz | Microchip
PIC16F1615T-I/SL

PIC16F1615T-I/SL - 8-Bit MCU, 14KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F1615T-I/SL is an 8-bit PIC16 microcontroller in the PIC® XLP™ 16F family, integrating 14 KB of Flash program memory, 1 KB of RAM, and a 32 MHz internal oscillator into a 14-pin SOIC package. The device is engineered for functional safety (FuSa) capable embedded control and ships in tape-and-reel packaging for high-volume surface-mount assembly lines. What is an 8-bit microcontroller? An MCU (microcontroller unit) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and a configurable set of peripherals onto one silicon die. The 8-bit designation refers to the width of the internal data path and ALU; PIC16 cores use a RISC Harvard architecture with 14-bit instruction words. Within the broader semiconductor taxonomy, MCUs belong to the embedded processor family alongside 32-bit Cortex-M parts, and they sit under the application hierarchy of microcontrollers -> processors -> semiconductors. Key features of the PIC16F1615 include a 10-bit A/D converter with multiple channels, a Capture/Compare/PWM (CCP) module, a 24-bit Signal Measurement Timer (SMT), and Zero-Cross Detection (ZCD) hardware for TRIAC-based AC control. The XLP™ (eXtreme Low Power) designation indicates the device targets battery-powered applications through sub-microamp sleep currents and nanoWatt XLP technology. Operating voltages of 2.5V, 3.3V, and 5V are all supported, which simplifies integration across 2-cell battery, coin-cell, and regulated-rail designs. Typical applications include small motor control (especially brushed DC and low-voltage steppers), LED lighting drivers with TRIAC dimming, household appliance control boards, and general-purpose sensor hubs. The 14-pin footprint is the smallest in the PIC16F161X family, making this part attractive when board area is constrained but the richer 20-pin feature set is not required. When designing with this MCU, place a 0.1 µF decoupling capacitor within 2 mm of the VDD pin and route the ICSP™ programming signals (ICSPCLK/ICSPDAT) to a 5-pin header compatible with Microchip debuggers such as PICkit™ 4 or MPLAB® Snap. The 'T' suffix in the part number denotes tape-and-reel packaging, while the 'I' indicates the -40 °C to +85 °C industrial temperature grade.

Devis Contact
PIC16F1615T-I/ST - 8-bit MCU, 14KB Flash, 32MHz | Microchip
PIC16F1615T-I/ST

PIC16F1615T-I/ST - 8-bit MCU, 14KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F1615T-I/ST is an 8-bit PIC® XLP™ 16F microcontroller with 14KB Flash, 1KB RAM, 32MHz CPU, and Functional Safety (FuSa) features, housed in a 14-pin TSSOP package on tape-and-reel. It integrates a 10-bit ADC, CCP module, 24-bit SMT timer, Zero-Cross Detect, and multiple communications peripherals in a compact 14-pin footprint. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and integrated peripherals such as timers, ADCs, and communication interfaces. Within the broader taxonomy, MCUs sit inside embedded computing devices, which themselves branch from microprocessors and semiconductors. The PIC16F family is Microchip's mid-range 8-bit PIC architecture known for low-power XLP (eXtreme Low Power) operation, deterministic instruction execution, and a robust peripheral set. Key features include 14KB Flash program memory (8K x 14 words), 1KB RAM, 32MHz internal oscillator, 10-bit ADC with computation, hardware Capacitive Voltage Divider (CVD) support, Complementary Waveform Generator (CWG), 24-bit Signal Measurement Timer (SMT) for precision time-of-flight measurements, and Zero-Cross Detect (ZCD) for AC line sensing. The 'F' Flash variant supports 2.5V-5.5V operation while the 'LF' low-voltage variant supports 1.8V-3.6V. The PIC16F1615T-I/ST uses an enhanced mid-range 8-bit CPU core with a hardware multiplier, 49 instructions, and 16-level hardware stack. It supports in-circuit debugging via ICD and programming via ICSP, allowing field updates. The 14-pin TSSOP footprint integrates multiple peripherals through Peripheral Pin Select (PPS), enabling flexible pin assignment for designers working in space-constrained applications. Typical applications include small motor control (the on-chip CWG and 24-bit SMT are designed for this), AC line voltage and current sensing (ZCD + ADC), LED lighting ballast and dimming control, capacitive-touch user interfaces (CVD hardware), and general-purpose 8-bit embedded control in industrial and consumer products. The TSSOP-14 footprint suits compact PCB designs. When designing with the PIC16F1615T-I/ST, observe Microchip's recommended decoupling (100nF + bulk) and ensure unused pins are configured as outputs low or inputs with weak pull-ups. The PPS system requires peripheral-to-pin mapping be configured in firmware, while ZCD pin assignment and CCP capture source must be set explicitly. Leave adequate Flash and RAM headroom when migrating to next-generation PIC16F1xxx devices. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet - including a per-pin pinout and a same-package comparison against competing 14-pin TSSOP 8-bit MCUs from Microchip's own PIC16F1xxx family.

Devis Contact
PIC16F1618-E/ML - 8-bit MCU, 7KB Flash, 32MHz | Microchip
PIC16F1618-E/ML

PIC16F1618-E/ML - 8-bit MCU, 7KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F1618-E/ML is an 8-bit PIC® XLP™ microcontroller delivering 32 MHz CPU performance with 7 KB (4K x 14) of self-programmable Flash program memory and 512 bytes of SRAM, housed in a 20-pin 4x4 mm VQFN (ML) package with an exposed thermal pad. The device integrates a 10-bit Analog-to-Digital Converter with computation, Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Zero-Cross Detection, and 24-bit Signal Measurement Timer (SMT) peripherals, and ships in an extended (E) -40C to +125C temperature grade. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, non-volatile program memory, volatile data RAM, and a peripheral set optimized for embedded control tasks. MCUs sit at the bottom of the computing hierarchy below microprocessors and are classified by bus width (8-bit, 16-bit, 32-bit), Flash program memory size, and integrated peripherals. PIC® microcontrollers use a Harvard RISC architecture with separate program and data buses, which is a design choice that simplifies instruction decoding and yields deterministic interrupt latency. Key features include seven 10-bit ADC channels, an internal 32 MHz oscillator, four Configurable Logic Cells for combinational and sequential logic, an 8-bit DAC, two PWM/SMT modules, and the proprietary XLP (eXtreme Low Power) technology that drops quiescent current to roughly 50 nA in sleep mode with peripherals running. The 24-bit SMT and CWG combine to support non-brushless DC motor control, fan speed regulation, and AC zero-cross sensing without an external ASIC. Typical applications include small brushed DC motor control, LED lighting drivers with zero-cross dimming, fan speed controllers, and general-purpose sensor signal conditioning. The combination of SMT, CWG, and CLC lets the PIC16F1618 replace two or three discrete timer ICs and a small logic array in cost-sensitive consumer appliances. The 20-pin VQFN footprint and Microchip's MPLAB X IDE / XC8 toolchain compatibility make prototyping straightforward, and the exposed pad aids thermal dissipation at full 32 MHz operation. When designing with this MCU, reserve the exposed pad as a continuous ground plane connection - the VQFN thermal pad is the primary heat path. Select the appropriate oscillator configuration (HFINTOSC, LFINTOSC, external) before writing code, because clock switching at runtime is gated by the Configuration Words. For new designs, validate that any drop-in alternative sits in the same 20-pin QFN footprint before committing PCB layout. This page synthesizes distributor pricing, drop-in alternatives from the same PIC16F161X family, application guidance, and design notes that complement - but do not replace - the manufacturer datasheet. The VQFN package is also referred to as HVQCCN or 20-VFQFN-EP in manufacturer and distributor documentation.

Devis Contact
PIC16F1618-E/P - 8-Bit MCU, 7KB Flash, 32MHz, 20-PDIP | Microchip
PIC16F1618-E/P

PIC16F1618-E/P - 8-Bit MCU, 7KB Flash, 32MHz, 20-PDIP | Microchip

The Microchip PIC16F1618-E/P is an 8-bit PIC microcontroller in the PIC16F161X family, featuring 7 KB of Flash program memory, 512 bytes of RAM, and a 32 MHz internal oscillator, housed in a 20-pin PDIP (DIP-20) through-hole package. The device operates from 2.5V to 5.5V, integrates a 10-bit ADC with up to 12 channels, and includes the eXtreme Low Power (XLP) feature set for battery-friendly designs. Built around an enhanced mid-range PIC16 core using a 14-bit instruction word, it executes most instructions in a single clock cycle, supporting deterministic real-time control. The -E temperature suffix indicates an extended industrial temperature range of -40C to +125C. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals on one die. The PIC16 family belongs to the 8-bit microcontroller category, sitting within the broader hierarchy of embedded microcontrollers -> microcontrollers -> semiconductor ICs -> integrated circuits. 8-bit MCUs remain widely used for cost-sensitive, deterministic, low-power applications such as motor control, sensor interfacing, and consumer appliances where 32-bit performance is not required. Key differentiating features of the PIC16F1618 include 4 x 10-bit PWM outputs, a 24-bit Signal Measurement Timer (SMT) for precision time/capture, Zero-Cross Detect (ZCD) for TRIAC/SSR AC-line control, Complementary Waveform Generator (CWG), and Configurable Logic Cells (CLC) for hardware-level glue logic. These peripherals make it well suited to small motor and lighting-control applications without external timer or logic ICs. The internal architecture combines a Harvard-bus 14-bit instruction core with on-chip debug logic (ICD), enabling in-circuit programming and debugging via MPLAB X IDE and the PICkit/SNAP toolchain. The 10-bit ADC supports up to 12 analog inputs, and the device offers multiple communication interfaces including I2C, SPI, and EUSART. Typical applications include small BLDC and DC motor control, AC-line zero-cross switching for TRIAC dimmers, fan and pump speed controllers, white-goods and appliance control boards, IoT sensor edge nodes, battery-powered instrumentation, and general-purpose embedded control where extended-temperature operation is required. The 20-pin PDIP package simplifies prototyping on breadboards and through-hole PCBs. When designing with this device, ensure the 32 MHz operation is configured via the internal oscillator with proper PLL settings, and add a 0.1uF decoupling capacitor close to each VDD pin. MPLAB X IDE with the XC8 compiler is the standard development environment, and Microchip's Code Configurator (MCC) plugin can auto-generate peripheral initialization code. This page synthesizes distributor pricing snapshots, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers and buyers a single, actionable reference for the PIC16F1618-E/P.

Devis Contact
PIC16F1618-E/SO - 8-bit MCU, 7KB Flash, 512B RAM, 20-SOIC | Microchip
PIC16F1618-E/SO

PIC16F1618-E/SO - 8-bit MCU, 7KB Flash, 512B RAM, 20-SOIC | Microchip

The Microchip Technology PIC16F1618-E/SO is an 8-bit PIC microcontroller built on a RISC core, featuring 7KB of Flash program memory and 512 bytes of RAM in a 20-pin SOIC wide-body (7.50 mm) package. The device is part of the PIC16(L)F161x family, which is targeted at embedded control of small motors and general-purpose applications in 8/14/20-pin packages, with the 'E' suffix indicating the extended industrial temperature grade of -40C to +125C. According to the Microchip product page, the family integrates a 10-bit ADC, CCP module, 24-bit SMT (Signal Measurement Timer), Zero-Cross Detect (ZCD), and Windowed Watchdog Timer (WWDT) for robust embedded sensing and control. A PIC microcontroller (Programmable Interface Controller) is a compact, low-power 8-bit RISC microprocessor with on-chip Flash, RAM, EEPROM, and peripherals designed for embedded control. The PIC architecture belongs to the broader category of microcontrollers (MCUs), which in turn fall under microprocessors and semiconductors. PICs are widely adopted because of their deterministic instruction set, low power consumption, low cost, and rich peripheral integration that minimizes external components. Key features include 7KB Flash program memory, 512 bytes RAM, a 32 MHz internal oscillator, 10-bit ADC, 24-bit SMT, Zero-Cross Detect (ZCD), Windowed Watchdog Timer (WWDT), CRC/Scan, and configurable logic with up to 18 I/O pins. The 20-pin SOIC package provides ample I/O for typical embedded designs while remaining easy to hand-solder or rework, making the device attractive for low-to-mid-volume industrial and consumer products. The PIC16F1618 uses an enhanced mid-range 8-bit RISC core with a 14-bit instruction word, allowing most instructions to execute in a single instruction cycle. This architecture delivers deterministic interrupt latency and predictable code execution, which is essential for motor control loops, signal measurement, and timing-critical sensing tasks. The integrated 32 MHz internal oscillator reduces BOM cost and frees an external crystal pin. Typical applications include small motor control (BLDC, brushed DC, fan control), LED lighting and dimming, general-purpose embedded control, home appliances, sensor interfacing, and consumer electronics. The wide operating voltage and extended temperature range also suit industrial control and appliance motor drive boards. When designing with this device, ensure that the configuration bits are set correctly for the chosen oscillator and watchdog behavior. For motor-control applications, place the ZCD sensing traces away from switching nodes to avoid noise injection, and follow Microchip AN1914 and AN1606 for sensorless BLDC reference designs. This page synthesizes distributor pricing, drop-in alternatives from the same PIC16 family, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC16F1618-E/SS - 8-Bit 32MHz XLP MCU 7KB Flash 20-SSOP | Microchip
PIC16F1618-E/SS

PIC16F1618-E/SS - 8-Bit 32MHz XLP MCU 7KB Flash 20-SSOP | Microchip

The Microchip Technology PIC16F1618-E/SS is an 8-bit PIC microcontroller from the PIC16(L)F161X family, featuring a 32 MHz internal oscillator, 7 KB (4K x 14) Flash program memory, 512 bytes SRAM, and 18 bytes data EEPROM, housed in a 20-pin SSOP package. It is engineered around Microchip's eXtreme Low Power (XLP) architecture, providing class-leading sleep currents for battery-driven embedded designs while integrating peripheral functions aimed at small-motor and general-purpose control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripheral I/O. The PIC16F1618 is classified within the broader hierarchy: 8-bit microcontroller -> RISC microcontroller -> embedded controller -> semiconductor IC. It belongs to Microchip's mid-range PIC16 enhanced core family, which uses a Harvard RISC architecture that executes one instruction per clock cycle (other than branches), delivering deterministic throughput at modest clock rates. Key features include 18 I/O pins, a 10-bit ADC with automatic threshold scanning, a 24-bit Signal Measurement Timer (SMT) for precision time-based measurements, a Zero-Cross Detection (ZCD) module for TRIAC/SSR AC-line control, a Complementary Waveform Generator (CWG) for power-switching topologies, and up to four 10-bit PWM outputs with complementary pairing. The device supports 1.8V-5.5V operation (PIC16F1618 wide-voltage variant; the LF version is 1.8V-3.6V regulated). Technically, the PIC16F1618 builds on Microchip's enhanced mid-range core with a 14-bit instruction word and hardware multiplier, allowing compact code density. Integrated Core Independent Peripherals (CIPs) such as CWG, ZCD, and SMT operate without CPU intervention, freeing the core for system logic and reducing firmware complexity for closed-loop control tasks. Typical applications include BLDC/PMSM small-motor control (fans, pumps, appliance blowers), LED lighting drivers with dimming, AC-line TRIAC dimmers using ZCD, IoT sensor nodes requiring XLP sleep, household appliances, and general-purpose 8-bit embedded control boards in industrial and consumer products. When designing with this part, ensure the unused pins are configured as outputs or tied appropriately, and respect the 5.5V absolute maximum on VDD even when the LF variant is used at lower voltages. Always verify the exact voltage range suffix (F vs LF) before substitution. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not collected in any single manufacturer datasheet view.

Devis Contact
PIC16F1618-I/GZ - 8-bit MCU, 7KB Flash, 32MHz, 20-UQFN | Microchip
PIC16F1618-I/GZ

PIC16F1618-I/GZ - 8-bit MCU, 7KB Flash, 32MHz, 20-UQFN | Microchip

The Microchip Technology PIC16F1618-I/GZ is an 8-bit PIC microcontroller from the PIC16F161x family, delivering 7KB of Flash program memory, 512 bytes of RAM, and a 32 MHz internal oscillator in a 20-pin UQFN (4x4x0.5 mm) package. It targets embedded control of small motors and general-purpose applications where on-chip peripherals reduce external component count. The part is qualified for the industrial temperature range (-40C to +85C) and ships in tube packaging per the /GZ suffix. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path and a Harvard or modified-Harvard architecture. Within the broader semiconductor taxonomy, MCUs sit inside the microcontroller category, which is itself a subclass of microprocessors, embedded processors, and ultimately integrated circuits. The PIC16F family uses a 14-bit instruction word optimized for compact code density and deterministic interrupt response, making these devices common in cost-sensitive real-time control loops. The PIC16F1618 sits under the PIC16F1614/1618 sub-family characterized by its 14/20-pin options and motor-control-oriented peripherals. Key on-chip features include a 10-bit Analog-to-Digital Converter (ADC) with multiple channels, a Zero-Cross Detector (ZCD) for AC line synchronization, a Windowed Watchdog Timer (WWDT) for safety-critical reset behavior, a cyclic redundancy check (CRC/SCAN) peripheral for memory integrity verification, a Configurable Logic Cell (CLC), Complementary Waveform Generator (CWG), and a Numerically Controlled Oscillator (NCO) for high-resolution frequency synthesis. Together these peripherals enable closed-loop BLDC and PFC designs without an external DSP. The device operates from 1.8V to 5.5V across the full -40C to +85C industrial range, simplifying battery- and USB-powered designs. Typical applications include small DC and stepper motor control, fan and pump controllers, LED lighting drivers with dimming, appliance user-interface boards, and general-purpose sensor-conditioning nodes. The combination of ZCD + CWG + NCO makes it particularly attractive for AC-line voltage dimmers and PFC stages, while the WWDT and CRC/SCAN target IEC 60730 safety-class B home-appliance designs. When designing with this part, ensure the trace between the ICSPDAT/ICSPCLK pins and the programming header is kept short to avoid programming errors, and route the analog AVSS/AVDD pair as a star ground to minimize ADC offset drift. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that the manufacturer datasheet alone does not aggregate.

Devis Contact
PIC16F1618-I/ML - 8-Bit MCU, 7KB Flash, 32MHz, 20-QFN | Microchip
PIC16F1618-I/ML

PIC16F1618-I/ML - 8-Bit MCU, 7KB Flash, 32MHz, 20-QFN | Microchip

The Microchip Technology PIC16F1618-I/ML is an 8-bit RISC microcontroller featuring a PIC16 core, 32 MHz maximum clock, 7 KB (4K x 14) of Flash program memory, and 512 bytes of SRAM, housed in a 20-pin QFN (4x4 mm) package with exposed pad. It belongs to the PIC® XLP™ 16F family, designed for low-power embedded control with eXtreme Low Power (XLP) technology. A microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), working memory (RAM), and programmable I/O peripherals. The 8-bit MCU class uses an internal data bus 8 bits wide and is favoured for deterministic real-time control, simple toolchains, and very low active and sleep currents. Within the 8-bit category, the PIC16 family is one of the most widely deployed architectures, spanning general-purpose, motor-control, and low-power XLP variants. The PIC16F1618 sits in the XLP branch, optimised for battery-powered and energy-harvesting applications. Key features include a 10-bit ADC with up to 12 channels, CCP/SCCP/PWM/24-bit SMT (Signal Measurement Timer) peripherals, Zero Cross Detect, a CLC (Configurable Logic Cell) block, multiple communication interfaces, and 18 I/O pins. The device operates from 2.3 V to 5.5 V, has an instruction cycle of 125 ns at 32 MHz, and supports both industrial (-40C to +85C) and extended (-40C to +125C) temperature ranges. Architecturally, the PIC16F1618 uses a Harvard RISC core with a 14-bit instruction word, an internal oscillator, and Microchip's nanoWatt XLP technology that delivers sleep currents down to the low nA range. The high-integration peripherals - including 24-bit SMT for precision time measurement, CLC for glue-logic replacement, and PWM with complementary outputs - reduce external component count and BOM cost. Typical applications include small motor control (BLDC, stepper, fan), LED lighting control, consumer electronics, battery-powered IoT sensor nodes, and general-purpose embedded control. The wide operating voltage range and low power make it well suited for both line-powered industrial and battery-powered portable products. When designing with the PIC16F1618, ensure the exposed thermal pad (EP) is soldered to a sufficiently large copper pour for both thermal dissipation and mechanical reliability. Decouple VDD with a 100 nF ceramic capacitor placed as close as possible to the pin pair, and follow Microchip's recommended ICSP programming layout if in-circuit programming is required. This page synthesises distributor pricing, drop-in alternatives from the same PIC16 family, and practical PCB/design notes not found in the manufacturer datasheet alone, helping procurement and design engineers quickly evaluate the PIC16F1618-I/ML for new designs and existing platform refreshes.

Devis Contact
PIC16F1618-I/P - 8-bit MCU, 7KB Flash, 20-Pin DIP | Microchip
PIC16F1618-I/P

PIC16F1618-I/P - 8-bit MCU, 7KB Flash, 20-Pin DIP | Microchip

The Microchip Technology PIC16F1618-I/P is an 8-bit flash microcontroller (MCU) from the PIC16F161X family, offering 7 KB of program Flash memory and 512 bytes of SRAM in a 20-pin PDIP through-hole package. It operates from 2.5V to 5.5V and integrates a 10-bit ADC with up to 17 channels, Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Zero-Cross Detection (ZCD), and a 24-bit Signal Measurement Timer (SMT) for embedded motor control and general-purpose applications. An 8-bit microcontroller (MCU) is a programmable embedded processor built around an 8-bit data path and a RISC architecture, sitting in the broader hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The PIC16F1618 belongs to the PIC16 family, one of Microchip's mid-range PIC architectures optimized for low power, deterministic interrupt response, and peripheral integration. With its 7 KB Flash and 512 bytes SRAM, this device is engineered for embedded control of small motors, lighting, and IoT edge nodes. Key features include 10-bit ADC, Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Zero-Cross Detect (ZCD), Numerically Controlled Oscillator (NCO), 24-bit Signal Measurement Timer (SMT), Peripheral Pin Select (PPS), and eXtreme Low Power (XLP) sleep modes. These peripherals support motor commutation, frequency generation, and precise timing capture, enabling many functions without external ICs. The PIC16F1618 uses a Harvard architecture with separate program and data buses, supporting up to 32 MHz internal oscillator operation. Its Core Independent Peripherals (CIPs) can operate without CPU intervention, freeing the core for application logic. The device includes enhanced mid-range 14-bit instruction set compatibility. Typical applications include small motor control (BLDC, stepper), LED lighting drivers, fan control, home appliances, IoT sensor nodes, and industrial automation. The combination of CWG, ZCD, and SMT makes it ideal for AC line zero-cross detection-based motor control and TRIAC phase-angle dimming. When designing with this MCU, ensure the VDD decoupling capacitor is placed within 5 mm of the VDD pin and that ICSP programming pins (ICSPCLK/ICSPDAT) are accessible for in-circuit programming. The device supports 2.5V-5.5V operation, allowing direct interfacing with 5V peripherals without level shifters. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC16F1618T-I/GZ - 8-bit MCU, 7KB Flash, 32MHz, 20-UQFN | Microchip
PIC16F1618T-I/GZ

PIC16F1618T-I/GZ - 8-bit MCU, 7KB Flash, 32MHz, 20-UQFN | Microchip

The Microchip Technology PIC16F1618T-I/GZ is an 8-bit PIC microcontroller from the PIC16F161X family, delivering 7KB of Flash program memory (4K x 14 words), 512 bytes of SRAM, and a 32 MHz internal oscillator in a 20-pin UQFN (4x4 mm) package. It operates from 2.3V to 5.5V and is qualified for the industrial -40C to +85C range, integrating a 10-bit ADC, Zero-Cross Detection (ZCD), Windowed Watchdog Timer (WWDT), and CRC with memory scan for functional safety. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals on a single die. Within the broader semiconductor hierarchy, the PIC16F1618 belongs to the 8-bit MCU family, which itself sits inside the microcontroller category of embedded computing ICs, ultimately under power-managed semiconductor devices. The PIC16F161X family specifically targets low-power embedded control of small motors and general-purpose applications, with peripherals such as Complementary Output Generator (COG), 24-bit Signal Measurement Timer (SMT), and Configurable Logic Cells (CLC) that displace discrete analog/digital glue logic. Key differentiating features include the 24-bit SMT for high-resolution time-of-flight and angle measurement, the Zero-Cross Detection peripheral for TRIAC dimming and motor control without optocouplers, and Configurable Logic Cells that let designers wire internal peripherals using a small on-chip logic fabric - reducing external component count. The device also offers Peripheral Pin Select (PPS) for flexible I/O mapping and a low-power XLP (eXtreme Low Power) technology variant, with typical sleep current in the sub-microamp region. Together these features position the PIC16F1618 for compact, energy-aware designs. Architecturally, the PIC16F1618 uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, a hardware multiplier, and a deterministic interrupt controller. The Harvard bus separates instruction fetch from data access, giving predictable execution timing that is essential for motor control loops and zero-cross timing applications. Typical applications include AC TRIAC dimming with zero-cross detection, small BLDC/PMSM motor control with back-EMF sensing, battery-powered sensor nodes using the XLP sleep modes, and general-purpose 8-bit control in white goods and consumer appliances. The 20-UQFN package suits compact PCB layouts where a 4x4 mm footprint is required. When designing with this part, choose the 20-UQFN (GZ) variant for the smallest PCB area and pair it with the Microchip MPLAB X IDE and XC8 compiler; for drop-in compatibility with the same package keep the PIC16F1613/PIC16F1615/PIC16F1619 family in mind. This page synthesizes distributor pricing, drop-in alternatives in the same 20-UQFN footprint, and practical design notes not aggregated in the manufacturer datasheet alone.

Devis Contact
PIC16F1618T-I/SS - 8-Bit 32MHz MCU 7KB Flash 20-SSOP | Microchip
PIC16F1618T-I/SS

PIC16F1618T-I/SS - 8-Bit 32MHz MCU 7KB Flash 20-SSOP | Microchip

The Microchip Technology PIC16F1618T-I/SS is an 8-bit PIC16F microcontroller built on the enhanced mid-range core, delivering 32 MHz CPU performance with 7 KB (4K x 14) of self-programmable Flash program memory in a 20-pin SSOP package. Operating from 2.3 V to 5.5 V, it integrates 512 bytes of SRAM, an on-chip 32 MHz internal oscillator, a 10-bit A/D converter with computation, and Microchip's eXtreme Low Power (XLP) technology for battery-friendly designs. The /SS suffix denotes the 5.30 mm body-width Shrink Small Outline Package supplied on tape-and-reel. What is a PIC16 microcontroller? A PIC16 is an 8-bit reduced-instruction-set computing (RISC) microcontroller from Microchip's mid-range family, designed for deterministic embedded control. Within the broader taxonomy, PIC16 sits at: PIC16 -> PIC mid-range MCU -> 8-bit microcontroller -> embedded MCU -> semiconductor. The PIC16F1618 adds peripheral integrations such as Zero-Cross Detection (ZCD), Windowed Watchdog Timer (WWDT), Cyclic Redundancy Check (CRC) with memory scan, Complementary Waveform Generator (CWG), Configurable Logic Cell (CLC), and a 24-bit Signal Measurement Timer (SMT) - features oriented toward small-motor and general-purpose control. Key features include 10-bit ADC, five CCP/SCCP/PWM modules, two I2C/SPI/UART (EUSART) capable peripherals, 18 enhanced I/O pins, and multiple timer/counter blocks. XLP technology keeps active current low while supporting sleep currents in the nanoampere range with retention. The on-chip voltage reference and temperature indicator further reduce external part count. Architecturally, the device employs a Harvard-style RISC pipeline with a 14-bit instruction word, enabling single-cycle execution on most instructions and predictable interrupt latency. The integrated peripheral pin-select (PPS) remapping grants flexible pin assignment without board re-spins. Code protection, low-voltage programming, and ICSP allow production-grade in-circuit firmware updates. Typical applications include small brushless DC motor control, LED lighting controllers, sensor signal conditioning, battery-powered IoT nodes, and home appliances. The XLP feature set is particularly suited to remote controls, smoke detectors, and other energy-harvesting or long-life battery products. When designing with this part, leverage Microchip's MPLAB X IDE and the XC8 compiler for development, and pay attention to the SSOP-20 thermal envelope versus the QFN equivalent for higher-current applications. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Devis Contact
PIC16F1619-E/ML - 8-Bit 32MHz 14KB Flash MCU | Microchip
PIC16F1619-E/ML

PIC16F1619-E/ML - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1619-E/ML is an 8-bit PIC16 XLP microcontroller with 14KB Flash, 32MHz CPU speed, and Functional Safety (FuSa) features, housed in a 20-pin QFN (4x4) package with exposed pad. It integrates 10-bit ADC, Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detect (ZCD), and Math Accelerator peripherals for embedded motor and signal-chain control. The '-E' suffix denotes the -40C to +125C extended temperature grade suitable for industrial and automotive environments. An 8-bit microcontroller (MCU) is a programmable integrated circuit that executes instructions from on-chip Flash memory using an 8-bit data path. It sits within the embedded control hierarchy: 8-bit MCU -> microcontroller -> semiconductor -> integrated circuit. PIC16 XLP parts add eXtreme Low Power technology with nanoWatt sleep modes, making them suitable for battery-powered and energy-harvesting designs. Functional Safety features simplify IEC 60730 Class B compliance for home appliances. Key features include 14KB (8K x 14) Flash program memory, 1KB RAM, 256 bytes EEPROM, 10-bit ADC with computation (ADC2), up to 18 I/O pins, CWG, 24-bit SMT, and multiple communication peripherals. The device operates from 2.5V to 5.5V and supports internal 32MHz oscillator output with PLL. The 20-QFN (4x4) package provides a compact 4mm x 4mm footprint with thermal pad for enhanced power dissipation. Architecturally, the PIC16F1619 uses a Harvard RISC core with a 14-bit instruction word and a hardware-based math accelerator that offloads signed/unsigned multiply and divide operations. The 24-bit SMT enables precise time-of-flight or angle measurement in motor control loops, while the CWG with auto-shutdown simplifies complementary PWM generation for half-bridge drivers. The CLC blocks allow configurable combinational/sequential logic without external gates. Typical applications include small motor control (BLDC, stepper, brushed DC), LED lighting drivers, home appliance control (washing machines, refrigerators, HVAC), battery chargers, and general-purpose embedded control in industrial and consumer products. The 20-pin QFN variant is chosen when PCB space is constrained. When selecting this part, ensure your compiler choice supports the PIC16F1619 (MPLAB XC8 recommended). The QFN-20 package requires careful PCB layout including thermal pad soldering to a ground plane. For prototypes, a QFN-to-DIP breakout board may simplify bring-up. This page synthesizes distributor pricing, drop-in alternatives, and design notes not consolidated on any single manufacturer or distributor page.

Devis Contact
PIC16F1619-E/P - 8-bit MCU, 32MHz, 14KB Flash, 20-PDIP | Microchip
PIC16F1619-E/P

PIC16F1619-E/P - 8-bit MCU, 32MHz, 14KB Flash, 20-PDIP | Microchip

The Microchip PIC16F1619-E/P is an 8-bit PIC16 microcontroller with 14KB Flash, 1KB RAM, and a 32 MHz CPU core, housed in a 20-pin PDIP through-hole package. The -E suffix indicates an industrial temperature grade of -40C to +125C, making it suitable for harsh-environment and automotive-adjacent applications. The device is part of the PIC16(L)F161X family that delivers on-chip features targeted at small-motor embedded control and general-purpose applications. A microcontroller (MCU) is a single-chip computer containing a CPU, memory (Flash program memory plus SRAM and EEPROM), and programmable I/O peripherals. Within the broader hierarchy, MCUs sit inside the embedded computing category, alongside microprocessors and DSPs; the PIC16 family is Microchip's mid-range 8-bit family, sitting between the baseline PIC10/PIC12/PIC16F and the high-performance PIC18/PIC24 families. The PIC16F1619 specifically targets applications that need signal-generation or motion-control peripherals (24-bit SMT, Zero-Cross Detect, CCP, Angular Timer) plus a 10-bit ADC, all in a small 14/20-pin footprint. Key features include 14KB (8K x 14) self-programmable Flash program memory, 1KB SRAM, and on-chip peripherals such as a 10-bit ADC with Computation (ADC2), Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detect (ZCD), and the Peripheral Pin Select (PPS) module. The device supports up to 32 MHz internal oscillator operation, and the XLP (eXtreme Low Power) variant is qualified for Functional Safety (FuSa) applications per the PIC16F16XX family roadmap. The wide 1.8V-5.5V VDD range simplifies designs that must run from a single Li-ion cell, two AA cells, or a regulated 3.3V/5V rail. The PIC16F1619 uses a 14-bit instruction word modified Harvard architecture with separate program and data buses, allowing simultaneous instruction fetch and operand access. The 32 MHz internal oscillator (8 MHz x 4 PLL) is factory-trimmed to within +/-1% across the industrial temperature range, which is sufficient for UART baud-rate accuracy without an external crystal in most cases. The PPS module is a key architectural feature that allows most digital peripherals to be routed to nearly any I/O pin, simplifying PCB layout and BOM reuse across the family. Typical applications include BLDC/PMSM small-motor control (with the 24-bit SMT for back-EMF sensing), LED lighting control, switched-mode power supply (SMPS) control loops, fan and pump controllers, AC line zero-cross detection for triac/SCR dimming, and general-purpose sensor-interface nodes. The wide operating voltage and low-power XLP modes also make it a strong fit for battery-powered IoT edge nodes. When designing with this device, pay attention to the in-circuit serial programming (ICSP) pins (ICSPCLK/ICSPDAT) which must be accessible on the PCB for production programming and debug. Decouple VDD with a 100nF ceramic capacitor placed within 5 mm of the pin, and add a bulk capacitor (>= 1 uF) if the application drives heavy loads. The MCLR pin requires a 10 kohm pull-up to VDD; do not leave it floating, even in production. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes for the PIC16F1619-E/P, providing information gain that goes beyond the manufacturer datasheet, distributor listings, or parametric search tools.

Devis Contact
PIC16F1619-I/ML - 8-Bit 32MHz 14KB Flash MCU | Microchip
PIC16F1619-I/ML

PIC16F1619-I/ML - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1619-I/ML is a PIC® XLP™ 16F series 8-bit microcontroller with Functional Safety (FuSa) features, delivering 32MHz CPU performance and 14KB (8K x 14 words) of on-chip Flash program memory. Housed in a 20-pin QFN (4x4 mm) package with exposed pad (ML suffix), it integrates eXtreme Low Power (XLP) technology for battery-friendly designs, making it suitable for embedded control of small motors and general purpose applications. What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a self-contained computing system on a single integrated circuit, built around an 8-bit data path CPU core. It executes instructions on 8-bit-wide data and typically includes program memory (Flash/ROM), data memory (RAM), digital I/O, timers, communication peripherals (UART, SPI, I2C), and analog peripherals (ADC, comparators). The PIC16F1619 belongs to the Microchip PIC16 mid-range 8-bit MCU family within the broader microcontroller hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Its XLP variant extends the family by adding ultra-low-power sleep modes for energy harvesting and battery-backed designs. Key features include 10-bit A/D converters, Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, Complementary Waveform Generator (CWG) for half-bridge motor drive, and configurable logic cells. The 32MHz internal oscillator delivers 8 MIPS of throughput, while hardware-based functional safety diagnostics support IEC 60730 Class B compliance for home appliances and white goods. The architecture combines a Harvard RISC core with separate program and data buses, 14-bit-wide instruction words, and a 16-level hardware stack. XLP technology drops quiescent current to < 50 nA in sleep mode with retention, allowing years of operation from a single coin cell. The 20-pin QFN package has a thermal pad for improved thermal dissipation. Typical applications include small BLDC/PMSM motor control (fans, pumps), consumer appliances (washing machines, coffee makers), LED lighting drivers, sensor signal conditioning, IoT edge nodes, and battery-powered instrumentation where functional safety certification is required. When designing with this MCU, ensure the exposed thermal pad is soldered to the PCB ground plane for proper thermal and electrical performance. Allocate MCLR pull-up, decoupling capacitors within 2mm of VDD/VSS pins, and use Microchip's MPLAB X IDE with XC8 compiler for code development. This page synthesizes distributor pricing, parametric comparisons with same-family variants, and drop-in alternatives from verified distributor data, providing unique design context not found on individual datasheet listings.

Devis Contact
PIC16F1619-I/P - 8-Bit MCU, 32MHz, 14KB Flash, 20-PDIP | Microchip
PIC16F1619-I/P

PIC16F1619-I/P - 8-Bit MCU, 32MHz, 14KB Flash, 20-PDIP | Microchip

The Microchip PIC16F1619-I/P is an 8-bit PIC microcontroller from the PIC® XLP™ 16F family with Functional Safety (FuSa) support, offering 14KB (8K x 14) of program Flash memory, 1KB of RAM, and 32MHz CPU performance in a 20-pin PDIP through-hole package. The -I suffix designates the industrial operating temperature range of -40C to +85C, and the device supports 2.5V, 3.3V, and 5V operation. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripheral IP blocks (ADC, timers, communication interfaces) into one IC. Within the broader taxonomy, the PIC16F1619 sits in the 8-bit mid-range PIC16F family -> PIC microcontroller -> microcontroller -> embedded processor -> semiconductor. Its XLP™ (eXtreme Low Power) designation indicates aggressive nanoWatt sleep-current design, making it a strong fit for battery-powered or energy-harvesting applications. The 20-PDIP package, with 0.300-inch pin spacing, is the most breadboard- and prototype-friendly footprint Microchip produces. Key differentiating features include a 10-bit A/D converter with up to 17 channels, a 24-bit Signal Measurement Timer (SMT) for precision time/frequency capture, Configurable Logic Cells (CLC) for hardware glue logic, Complementary Waveform Generator (CWG), Zero-Cross Detection (ZCD), and a peripheral pin select (PPS) block that remaps digital peripherals to any I/O pin. The 32MHz internal oscillator (8 MIPS) eliminates external crystals in many designs and supports factory-calibrated accuracy over temperature and voltage. Architecturally, the PIC16F1619 uses the standard enhanced mid-range 16-bit instruction word core, giving 14-bit wide opcodes and a flat linear program-memory model. The MIPS-style core executes most instructions in one cycle, and combined with the 32MHz FOSC this delivers 8 MIPS throughput - adequate for closed-loop control, sensor fusion, and modest communication stacks. Typical applications include small motor control (BLDC, stepper, brushed DC) using the CWG and SMT, lighting control via dimming and zero-cross switching, household appliances, IoT edge nodes, capacitive-touch human interfaces, sensor signal conditioning, and general-purpose embedded control in consumer and industrial products. The 20-pin count keeps BOM low while still providing enough I/O for typical control panels. When designing with this device, plan the pin assignment early because PPS lets most digital peripherals move to any RP pin, but analog channels and the ICSP programming pins (PGED/PGEC) are fixed. Always reserve a stable voltage rail with a 100nF decoupling capacitor close to VDD and a bulk capacitor near the IC, and verify that total I/O sink/source current stays within the per-pin and per-port limits documented in the electrical characteristics section of the manufacturer datasheet. This page synthesizes distributor pricing, drop-in PDIP alternatives, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC16F1619-I/SS - 8-Bit 32MHz MCU, 14KB Flash SSOP-20 | Microchip
PIC16F1619-I/SS

PIC16F1619-I/SS - 8-Bit 32MHz MCU, 14KB Flash SSOP-20 | Microchip

The Microchip Technology PIC16F1619-I/SS is an 8-bit PIC microcontroller in the PIC16F161X family with 14KB Flash, 1KB RAM, and a 32MHz internal oscillator, housed in a 20-pin SSOP (Shrink Small Outline Package). Per the Microchip datasheet, it operates from 2.5V to 5.5V and integrates 10-bit ADC, CCP, 24-bit SMT, Zero-Cross Detection (ZCD), Windowed Watchdog Timer (WWDT), and CRC for functional-safety capable embedded control of small motors and general-purpose applications. An 8-bit MCU (microcontroller) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (RAM), and peripherals (ADC, timers, communication) on one die. The PIC16F1619-I/SS sits inside the broader taxonomy: microcontroller -> embedded processor -> semiconductor IC. The PIC16F161X family targets low-pin-count functional-safety and motor-control applications, combining XLP (eXtreme Low Power) operation with built-in ZCD and CRC to simplify designs that previously required external components. Key features include 14KB (8K x 14) Flash program memory, 1KB RAM, 32MHz maximum CPU clock (8MHz internal oscillator with 4x PLL), up to 18 I/O pins, 10-bit ADC with multiple channels, enhanced PWM/CCP, 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection (ZCD) for AC line sync, Windowed WDT (WWDT) for safety, and CRC peripheral for memory integrity. The SSOP-20 footprint is one of the densest standard SMD packages, suitable for compact boards. Architecturally, the PIC16F1619 uses Microchip's enhanced mid-range 8-bit core with hardware multiplier, 49 instruction set, and 16-level hardware stack. The integration of CRC and WWDT enables ASIL-aware functional-safety implementations at low cost, distinguishing it from older PIC16F baselines that required external supervisors. Compared to ARM Cortex-M0 MCUs, the PIC16F1619 trades raw MIPS for ultra-low power and richer mixed-signal peripherals. Typical applications include small BLDC/PMSM motor control, AC-line zero-cross switching (triac/SCR dimming), consumer white goods, LED lighting with dimming, smart sensors, IoT end-nodes with battery operation, and functional-safety building blocks for white goods. The combination of ZCD + 24-bit SMT + CRC is especially aimed at IEC 60730 Class B appliance safety. When designing with this part, reserve one pin pair for ICD (In-Circuit Debug) and follow Microchip's emulator pinout to avoid rework. For motor-control applications, place the ZCD input near the AC Mains via a high-impedance divider with proper creepage clearance. This page synthesizes distributor pricing, drop-in PIC16 alternatives, and functional-safety design notes not aggregated in any single Microchip datasheet.

Devis Contact
PIC16F1619T-E/SS - 8-bit 32MHz 14KB Flash MCU | Microchip
PIC16F1619T-E/SS

PIC16F1619T-E/SS - 8-bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1619T-E/SS is an 8-bit PIC16 microcontroller from the PIC16F161X family, built around an enhanced mid-range core running at up to 32 MHz and delivering 14 KB (8K x 14) of on-chip Flash program memory in a 20-pin SSOP package. It is rated for the extended -40C to +125C industrial temperature range and is qualified for Functional Safety (FuSa) applications per the PIC16F1619 family datasheet. The 'T' suffix denotes Tape & Reel packaging and 'E' denotes the extended industrial temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and peripheral interfaces (ADCs, timers, communication ports, GPIO) into one IC. Within the taxonomy: microcontroller -> 8-bit MCU -> PIC16 family -> enhanced mid-range core. The PIC16F161X family is positioned for low-power, mixed-signal embedded control of small motors and general-purpose applications, sitting above PIC10/12/16 baseline parts in capability and below 16-bit dsPIC/PIC24 devices in performance. Key features of the PIC16F1619 include 1 KB RAM, a 10-bit A/D converter with computed automatic channel sequencing, a 24-bit Signal Measurement Timer (SMT) for precision timing, Configurable Logic Cells (CLC), Zero-Cross Detect (ZCD), Complementary Waveform Generator (CWG), Watchdog Timer with windowed mode (WWDT), CRC/SCAN for memory integrity, and the eXtreme Low Power (XLP) sleep modes. It operates from 2.3V to 5.5V and supports 10 MIPS at 32 MHz, enabling responsive interrupt-driven control loops. Typical applications include small brushed-DC and stepper motor control loops where the 24-bit SMT provides accurate pulse-width measurement and the CWG produces complementary drive signals, white-goods and HVAC user-interface boards using the CLC and ZCD, LED lighting controllers with dimming feedback, and low-power IoT sensor nodes taking advantage of the XLP nanoWatt sleep currents. When designing with this MCU, plan to use the MPLAB X IDE with XC8 compiler and Microchip Code Configurator (MCC) plug-in for peripheral initialization. Keep AVDD bypassed with a 0.1 uF ceramic placed within 5 mm of the supply pin, and route analog inputs away from switching traces to preserve ADC accuracy. This page synthesizes distributor pricing, drop-in same-family variants, and practical design notes not aggregated on a single manufacturer page.

Devis Contact
PIC16F1619T-I/ML - 8-Bit MCU, 14KB Flash, 32MHz, QFN-20 | Microchip
PIC16F1619T-I/ML

PIC16F1619T-I/ML - 8-Bit MCU, 14KB Flash, 32MHz, QFN-20 | Microchip

The Microchip Technology PIC16F1619T-I/ML is an 8-bit PIC microcontroller from the PIC16F161X family, delivering 32 MHz CPU performance, 14 KB of Flash program memory (8K x 14), 1 KB of RAM, and integrated 10-bit A/D conversion in a 20-pin QFN (4x4 mm) package with exposed thermal pad. As a member of the PIC XLP (eXtreme Low Power) family, the device is purpose-built for Functional Safety (FuSa) applications and is well-suited to embedded control of small motors and general-purpose applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (typically Flash), volatile data memory (RAM), and a set of peripherals such as timers, communication interfaces, and analog converters. Within the broader taxonomy, the PIC16F1619 sits at the intersection of 8-bit microcontrollers -> PIC microcontrollers -> PIC16 mid-range family -> Microcontroller -> Embedded IC -> Semiconductor. It targets designers who need deterministic real-time control with low power consumption, replacing discrete logic and small ASICs in cost-sensitive industrial and consumer products. Key features of the PIC16F1619T-I/ML include 14 KB self-programmable Flash, 1 KB SRAM, a 10-bit A/D converter with multiple channels, Capture/Compare/PWM (CCP) modules, a 24-bit Signal Measurement Timer (SMT), a Zero-Cross Detect (ZCD) peripheral, Configurable Logic Cells (CLC), and on-chip peripherals that reduce external component count. The QFN-20 (4x4 mm) package with exposed pad provides low thermal resistance and compact PCB footprint, making it ideal for space-constrained designs operating from 2.3V to 5.5V. Architecturally, the PIC16F1619 uses Microchip's enhanced mid-range 8-bit core with a hardware multiplier, 16-level deep hardware stack, and direct/indirect addressing modes. The 10-bit ADC delivers up to 100 ksps across multiple channels, and the dedicated motor-control peripherals (SMT, ZCD, CCP) offload time-critical operations from the CPU, allowing the main loop to handle communication and supervisory tasks. Typical applications include small motor control (BLDC, brushed DC, and stepper drivers), LED lighting controllers, white-goods appliance control, fan and pump controllers, and battery-powered IoT sensor nodes. The combination of low-power XLP operation and a rich peripheral set makes it suitable for both line-powered and energy-harvesting designs. When designing with this part, allocate the QFN exposed pad to a continuous ground copper pour to meet the 31.6 C/W theta-JA thermal rating and avoid derating. Decouple VDD with a 100 nF ceramic capacitor placed within 2 mm of the pin, and route MCLR through the recommended 10 kohm pull-up. Confirm unused I/O pins are configured as outputs low or inputs with weak pull-ups to minimize sleep current. This page synthesizes distributor stock and pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC16F1619T-I/SO - 8-bit MCU, 14KB Flash, 32MHz, 20-SOIC | Microchip
PIC16F1619T-I/SO

PIC16F1619T-I/SO - 8-bit MCU, 14KB Flash, 32MHz, 20-SOIC | Microchip

The Microchip Technology PIC16F1619T-I/SO is a PIC® XLP™ 16F-family 8-bit microcontroller delivering 32 MHz CPU performance with 14 KB Flash program memory and 1 KB SRAM, housed in a 20-pin SOIC (SO) package supplied on tape and reel. It operates across a 2.5V/3.3V/5V range and integrates a 10-bit A/D converter alongside functional-safety (FuSa) peripherals targeted at embedded control of small motors and general-purpose applications. Key features include a 10-bit ADC, Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detect, and the eXtreme Low Power (XLP) technology that characterizes this family. The -I temperature grade suffix denotes industrial -40C to +85C operation, while the -T suffix indicates tape-and-reel packaging for high-volume assembly. The 20-pin SOIC footprint provides a familiar, breadboard-friendly and reflow-solderable form factor used across the PIC16F1xxx family. Technically, the PIC16F1619 belongs to Microchip's enhanced mid-range PIC16 core with a 14-bit instruction word, hardware multiplier, and a peripheral pin-select (PPS) block that remaps digital I/O to most device pins. The 24-bit SMT can capture time-of-flight, frequency, period, and pulse-width measurements with sub-microsecond resolution, while the Zero-Cross Detect block enables AC-line synchronous triggering for TRIAC or SSR control in motor and lighting applications. Internal oscillator accuracy is trimmed at the factory to within ±1% typical. Typical applications include small BLDC and stepper motor control, ceiling-fan and HVAC triac-based phase-angle control, white-goods and appliance user-interface boards, LED lighting drivers with dimming, and general-purpose 8-bit embedded control replacing discrete logic. Functional-safety features support IEC 60730 Class B household appliance requirements, where the MCU performs self-diagnostics on clock, supply, and program-flow integrity. When designing with this part, allocate 4 bytes of the configuration word for oscillator and watchdog settings and reserve a PPS lock sequence before reassigning I/O. For motor-drive boards, route the Zero-Cross Detect input through a 100k series resistor and a 100V TVS clamp to meet surge requirements. Verify the trailing 'T' in the MPN specifies the tape-and-reel quantity you need for production.

Devis Contact