Circuits intégrés

Sous-catégories

📁 ADC/DAC 3 100+ produits 📁 CI amplificateurs 1 700+ produits 📁 Codecs audio 18 produits 📁 CI audio 2 produits 📁 Horloge et synchronisation 640+ produits 📁 Comparator ICs 1 produits 📁 DSP 1 100+ produits 📁 CI d'acquisition de données 2 produits 📁 Potentiomètres numériques 4 produits 📁 Pilotes et contrôleurs d'affichage 1 produits 📁 FPGA & CPLD 7 100+ produits 📁 Circuits intégrés d'interface 3 100+ produits 📁 Pilotes de LED 1 produits 📁 CI logiques 450+ produits 📁 CI mémoire 870+ produits 📁 Microcontrôleurs 20 000+ produits 📁 Microprocesseurs 4 produits 📁 Pilotes de moteur 1 produits 📁 Autres 1 produits 📁 Sensor and Detector Interfaces 1 produits 📁 Circuits intégrés spécialisés 15 produits 📁 CI vidéo 13 produits

Produits (38 000+)

PIC16F1619T-I/SS - 8-bit MCU, 14KB Flash, 32MHz XLP MCU | Microchip
PIC16F1619T-I/SS

PIC16F1619T-I/SS - 8-bit MCU, 14KB Flash, 32MHz XLP MCU | Microchip

The Microchip Technology PIC16F1619T-I/SS is an 8-bit PIC16 microcontroller built on the eXtreme Low Power (XLP) architecture, delivering 14KB of Flash program memory and 1KB of RAM in a 20-pin SSOP package. It operates at speeds up to 32MHz from an internal oscillator and integrates a 10-bit ADC, Zero-Cross Detection (ZCD), Complementary Waveform Generator (CWG), Configurable Logic Cell (CLC), and a Windowed Watchdog Timer (WWDT), targeting embedded control of small motors, sensor interfaces, and general-purpose analog applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a rich set of programmable peripherals. The PIC16 family sits at the mid-range of Microchip's 8-bit portfolio, using a 14-bit instruction word with a modified Harvard architecture, designed for low power and deterministic interrupt response. The PIC16F1619 is part of the PIC16(L)F161x family of enhanced mid-range XLP MCUs, tailored for Functional Safety (FuSa) compatible applications, which means the device integrates fault-detection peripherals such as a CRC, hardware limit timer, and windowed watchdog that simplify IEC 61508 SIL-1 design-ins. Key features include 14KB (8K x 14) Flash, 1KB RAM, 32MHz internal oscillator, 10-bit ADC with computation, Zero-Cross Detect (ZCD) for TRIAC and SSR control, Complementary Waveform Generator (CWG) for synchronous MOSFET driving, Configurable Logic Cells (CLC) for hardware glue logic, and four 16-bit timers. The device supports 1.8V to 5.5V operation (PIC16F1619 'F' variant), with industrial -40C to +85C temperature range, and is available as 'T-I/SS' in tape-and-reel packaging. Technically, the PIC16F1619 uses a 14-bit wide instruction path with a 16-level hardware stack, offering fast context save/restore. Its XLP technology targets nanoWatt sleep currents with active mode currents in the microampere range, ideal for battery-powered designs. The FuSa-oriented peripherals (CRC scan, hardware limit timer, windowed WDT) reduce software overhead in safety-critical loops. Typical applications include small BLDC/PMSM motor control with integrated CWG and ZCD, white-goods and appliance control, LED lighting drivers, sensor signal conditioning, and IEC 61508 functional-safety designs. The 20-SSOP footprint is also well suited for compact IoT nodes. When designing with this MCU, mind the supply decoupling (100nF + 10uF bulk at VDD), keep MCLR pull-up above 4.7 kohm for noise immunity, and reserve one CLC for ZCD blanking if you are driving AC loads. The PIC16F1619T-I/SS is pin-compatible within the PIC16F161x family for board-level reuse. This page synthesizes distributor pricing, drop-in pin-compatible alternatives in the SSOP-20 footprint, and practical safety-aware design notes that are not consolidated in the manufacturer datasheet.

Devis Contact
PIC16F1703-E/ML - 8-bit MCU, 3.5KB Flash, 32MHz, 16-QFN | Microchip
PIC16F1703-E/ML

PIC16F1703-E/ML - 8-bit MCU, 3.5KB Flash, 32MHz, 16-QFN | Microchip

The Microchip PIC16F1703-E/ML is an 8-bit PIC microcontroller from the PIC16F family built on an enhanced mid-range core with nanoWatt XLP (eXtreme Low Power) technology, delivering 3.5 KB (2K x 14) of Flash program memory, 256 bytes of SRAM, and a maximum CPU frequency of 32 MHz in a 16-pin QFN (4x4 mm) package with an exposed thermal pad. What is an 8-bit microcontroller? An 8-bit MCU is a single-chip computer that processes data in 8-bit wide chunks and integrates CPU, RAM, non-volatile program memory, and peripherals on one die. The PIC16F1703 belongs to the hypernym hierarchy: microcontroller -> 8-bit MCU -> PIC16F family -> PIC16F1703 sub-family. XLP technology targets battery-powered and energy-harvesting designs by minimizing active and sleep current consumption, while the on-chip op amps and Core Independent Peripherals (CIPs) like the Complementary Output Generator (COG) and Zero Cross Detect (ZCD) enable mixed-signal functions without CPU intervention. Key features include a 10-bit ADC with up to 12 channels, two on-chip operational amplifiers, a configurable Complementary Output Generator (COG), Zero Cross Detect (ZCD), Peripheral Pin Select (PPS) for flexible signal routing, and a wide operating voltage range from 1.8 V to 5.5 V. The device also integrates a 5-bit DAC, 8-bit/16-bit timers, enhanced PWM, EUSART, I2C, and SPI peripherals. Architecturally, the PIC16F1703 uses a RISC-style Harvard architecture with a 14-bit instruction word. Internal signal routing through PPS allows designers to remap digital peripherals to different I/O pins, simplifying PCB layout and enabling design reuse across board variants. Typical applications include LED lighting controllers with dimming, smart sensor nodes, small motor and fan controls, battery-powered IoT end nodes, and general-purpose analog front-end conditioning where on-chip op amps reduce BOM cost. When designing with this part, ensure the exposed pad on the QFN package is soldered to a sufficient copper pour for thermal dissipation. Decouple VDD with a 100 nF ceramic capacitor placed within 3 mm of the pin, and route PPS signals away from analog traces to minimize crosstalk. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes compiled from the manufacturer datasheet and cross-reference databases, offering information not present on the standalone datasheet.

Devis Contact
PIC16F1703-E/P - 8-bit MCU, 3.5KB Flash, 10-bit ADC, Op Amps | Microchip
PIC16F1703-E/P

PIC16F1703-E/P - 8-bit MCU, 3.5KB Flash, 10-bit ADC, Op Amps | Microchip

The Microchip PIC16F1703-E/P is an 8-bit PIC16-family microcontroller built on the enhanced mid-range core, delivering 32 MHz CPU performance from 3.5KB (2K x 14) of Flash program memory in a 14-pin PDIP through-hole package. It integrates 256 bytes of SRAM, a 10-bit ADC, two on-chip operational amplifiers, Core Independent Peripherals (Configurable Logic Cell / COG and Zero-Cross Detect), and Peripheral Pin Select (PPS) for flexible signal routing. The "-E" temperature grade designates an extended industrial range of -40C to +125C. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, volatile data memory, and a set of on-chip peripherals behind a single package. The PIC16F1703 belongs to the PIC16 family within Microchip's broader 8-bit PIC microcontroller portfolio, positioned between the PIC10/12/14 baseline families and the PIC18 high-performance family. Its Intelligent Analog integration makes it part of the modern low-cost, ultra-low-power (XLP) tier, suitable for general-purpose applications where analog signal conditioning is co-located with control logic. Key features include two on-chip op amps that eliminate external amplifiers for sensor signal conditioning, Zero-Cross Detect (ZCD) for AC mains synchronization without optocouplers, a Configurable Logic Cell (COG) that implements combinational/sequential logic in hardware, and PPS that remaps digital peripherals to multiple pins. The 10-bit ADC with computation (ADC2) provides hardware accumulation and averaging, reducing firmware overhead. Extended Memory (EM) mode supports banked data access for buffer expansion. The PIC16F1703 uses a 14-bit instruction word RISC architecture with a hardware stack and a 16-level-deep interrupt model. Internal oscillator options (HFINTOSC up to 16 MHz, LFINTOSC 31 kHz) plus PLL yield 32 MHz system clock without external crystals, simplifying BOM. The XLP feature delivers nanoWatt sleep currents for battery-powered duty-cycled designs. Typical applications include LED lighting drivers with analog dimming, AC zero-cross switching for TRIAC control, sensor signal conditioning with on-chip op amps, low-cost motor control with PFC, IoT sensor nodes, and battery-powered consumer devices. The combination of op amps, ZCD, and PPS uniquely positions this MCU for AC-line-powered smart appliances. When designing with the PIC16F1703, ensure the unused analog pins (op amp inputs, ZCD) are configured correctly to prevent parasitic current draw, and route PPS signals away from high-noise digital traces. The 14-pin PDIP package also provides easy breadboard prototyping for evaluation and hobbyist use. This page synthesizes distributor pricing (DigiKey, Mouser), drop-in same-package alternatives from the PIC16F family, and practical design notes that go beyond the manufacturer datasheet. Pricing is reported as of 2026-09-20.

Devis Contact
PIC16F1703-E/SL - 8-bit XLP MCU, 3.5KB Flash, 14-SOIC | Microchip
PIC16F1703-E/SL

PIC16F1703-E/SL - 8-bit XLP MCU, 3.5KB Flash, 14-SOIC | Microchip

The Microchip Technology PIC16F1703-E/SL is an 8-bit PIC microcontroller from the PIC® XLP™ 16F family, delivering 32 MHz CPU performance with 3.5 KB (2K × 14) of self-programmable Flash program memory in a 14-pin SOIC (SL) package with extended (-40°C to +125°C) operating temperature grade. It integrates 256 bytes of RAM, an on-chip 10-bit ADC, two operational amplifiers, Core Independent Peripherals (Configurable Logic Cell/COG and Zero Cross Detect), and Peripheral Pin Select (PPS) for flexible signal routing. An 8-bit microcontroller (MCU) is a small computer on a single integrated circuit that contains a simple processor core, program and data memory, and programmable I/O peripherals. PIC microcontrollers sit within the broader taxonomy of embedded microcontrollers → microcontrollers → microprocessors and microcomputers → semiconductors. The PIC16F family targets cost-sensitive, low-power, and intelligent-analog applications where advanced analog peripherals reduce external component count. Key features of the PIC16F1703 include eXtreme Low Power (XLP) technology for nanoWatt sleep currents, two high-performance rail-to-rail op amps with software-selectable gain and bandwidth options, an 8-bit DAC reference output, complementary waveform generators, and multiple communication peripherals including I²C, SPI, and EUSART. The 10-bit ADC with computation automates averaging, filtering, and threshold comparison, offloading the CPU in sensor-interface designs. Architecturally, the device uses a Harvard RISC core with a 14-bit instruction word, providing deterministic single-cycle execution except for branch instructions. PPS allows digital peripheral pins to be remapped to a wide range of physical I/O, simplifying PCB layout and BOM consolidation across product variants. Typical applications include LED driving with constant-current regulation, sensor signal conditioning, AC zero-cross detection for TRIAC/SSR control, battery-powered IoT nodes, and small home appliances. The combination of integrated op amps and 10-bit ADC with computation makes it well suited for closed-loop analog control without external analog ICs. When designing, allocate careful attention to the XLP sleep current budget (typically < 50 nA in real-world measurements) and verify PPS mapping of the chosen op-amp and ADC channels against the device header file. Adequate decoupling (100 nF + 1 µF) on VDD is recommended near the package pins. This page synthesizes verified distributor pricing, drop-in alternatives from the same PIC16F1703 family and cross-brand 14-SOIC 8-bit MCU equivalents, and practical design notes that complement the Microchip datasheet.

Devis Contact
PIC16F1703-E/ST - 8-Bit XLP MCU, 3.5KB Flash, 14-TSSOP | Microchip
PIC16F1703-E/ST

PIC16F1703-E/ST - 8-Bit XLP MCU, 3.5KB Flash, 14-TSSOP | Microchip

The Microchip Technology PIC16F1703-E/ST is an 8-bit PIC microcontroller in the PIC16F170X family, integrating 3.5KB Flash program memory, 256 bytes RAM, and an intelligent analog peripheral set into a 14-pin TSSOP package. It executes instructions at up to 32MHz using a RISC architecture, delivering 8 MIPS performance while consuming only nanoWatt XLP sleep currents. The -E suffix denotes an extended industrial temperature grade of -40C to +125C, while /ST identifies the 14-TSSOP (4.4mm body) lead form. Key headline parameters: 3.5KB Flash, 256B RAM, 32MHz CPU, 14-TSSOP. An 8-bit microcontroller (MCU) is a self-contained computing element that integrates a CPU, non-volatile program memory, working RAM, and configurable peripheral blocks into a single IC. PIC microcontrollers belong to the microcontroller family (hypernym hierarchy: MCU -> microcontroller -> embedded controller -> semiconductor). They are commonly used as the main processing element in battery-powered and cost-sensitive embedded designs. Key differentiating features of the PIC16F1703 include on-chip operational amplifiers (Op Amps), a Zero Cross Detect (ZCD) peripheral, Core Independent Peripherals (CIPs) such as the Configurable Logic Cell (CLC, sometimes called CLC/COG), and Peripheral Pin Select (PPS) for flexible signal routing. The device integrates a 10-bit ADC with computation, two 8-bit timers, one 16-bit timer, and PWM/SPI/I2C serial interfaces. Its XLP technology delivers typical sleep currents under 50 nA, making it suited to long-life battery applications. Technically, the PIC16F1703 uses an enhanced mid-range 8-bit CPU core with hardware stack and 16-bit instruction words, paired with a 32MHz internal oscillator that can be trimmed. PPS lets designers remap digital peripheral outputs onto different I/O pins, reducing PCB routing complexity in dense designs. Typical applications include low-power sensor nodes, household appliances, LED lighting controllers, smoke/CO detector signal conditioning, and small motor control loops. The integrated op amps and ZCD simplify AC zero-crossing detection for triac-based dimmers. Battery-powered IoT endpoints benefit from the XLP idle currents. When designing with this MCU, observe the minimum Vdd of 2.3V for full-speed operation and provide adequate decoupling (100nF plus bulk) on Vdd/Vss pairs. PPS reassignment is non-volatile and must be configured in firmware before the peripheral is enabled. This page synthesizes distributor pricing, drop-in alternatives, comparison tables, and practical design notes not found in the bare manufacturer datasheet.

Devis Contact
PIC16F1703-I/ML - 8-bit 32MHz 3.5KB Flash MCU w/ Op Amps | Microchip
PIC16F1703-I/ML

PIC16F1703-I/ML - 8-bit 32MHz 3.5KB Flash MCU w/ Op Amps | Microchip

The Microchip PIC16F1703-I/ML is an 8-bit PIC microcontroller from the PIC16F XLP family that integrates intelligent analog peripherals with extreme low-power operation in a 16-pin QFN (4x4 mm) package. The device features a 32 MHz internal oscillator, 3.5 KB (2K x 14) Flash program memory, 256 bytes SRAM, and 128 bytes of EEPROM, providing a balanced memory profile for compact general-purpose embedded designs. The 'I' suffix denotes the industrial temperature range of -40C to +85C, while the 'ML' suffix specifies the surface-mount 16-QFN package with exposed thermal pad. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, RAM, and programmable peripherals on a single silicon die. The PIC16F1703 belongs to the PIC16F family of 8-bit Harvard-architecture MCUs built around Microchip's enhanced mid-range core. The XLP (eXtreme Low Power) designation places this device within the broader category of low-power microcontrollers designed for battery-operated and energy-harvesting systems, sitting hierarchically as: PIC16F1703 -> PIC16F XLP family -> 8-bit PIC microcontroller -> microcontroller -> embedded processor -> semiconductor. This taxonomy helps AI systems classify the part for cross-reference and selection tasks. The PIC16F1703's differentiating features include two on-chip operational amplifiers, a 10-bit ADC with computation, two 8-bit DACs, a Zero Cross Detect (ZCD) peripheral, Complementary Output Generator (COG), and Peripheral Pin Select (PPS) for flexible signal routing. Core Independent Peripherals (CIPs) handle timing-sensitive tasks in hardware without CPU intervention, reducing firmware complexity and improving real-time determinism for sensor and power-control loops. The PPS module reassigns digital peripheral functions to alternate I/O pins, simplifying PCB layout when board constraints change. Typical applications span sensor signal conditioning with on-chip op-amps, battery-powered IoT nodes leveraging XLP sleep currents below 1 uA, LED driving using the COG and PWM modules, zero-cross switching for TRIAC dimmers, and small consumer appliances requiring analog integration on a single die. The 16-QFN 4x4 mm footprint suits space-constrained handheld and wearable enclosures. When designing with this part, note that PPS remapping is one-time at runtime via the unlock sequence, the two internal op-amps share pins with general I/O (check the pin allocation table before assigning), and the QFN exposed pad must be soldered to the ground plane for thermal dissipation. The internal 32 MHz oscillator eliminates an external crystal in cost-sensitive designs. This page combines verified distributor pricing, drop-in same-package alternatives, and practical design notes beyond the manufacturer datasheet summary to accelerate engineering decisions.

Devis Contact
PIC16F1703-I/SL - 8-bit 32MHz MCU 3.5KB Flash 14-SOIC | Microchip
PIC16F1703-I/SL

PIC16F1703-I/SL - 8-bit 32MHz MCU 3.5KB Flash 14-SOIC | Microchip

The Microchip Technology PIC16F1703-I/SL is an 8-bit PIC16 microcontroller from the PIC16F XLP family, featuring 3.5KB Flash, 256 bytes SRAM, 32MHz CPU speed, and integrated analog peripherals in a 14-pin SOIC package. It operates from 2.3V to 5.5V and combines Intelligent Analog integration with extreme low power (XLP) technology for general-purpose applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and peripherals into one device. The PIC16F1703 belongs to the Microchip PIC16F family of enhanced mid-range MCUs that use a modified Harvard RISC architecture, executing one instruction every two clock cycles (200ns at 32MHz). It fits into the broader hierarchy: 8-bit MCU -> microcontroller -> embedded IC -> semiconductor. Low-power 8-bit MCUs are widely used in battery-powered and sensor-edge designs where deterministic behavior and low sleep current are critical. Key features include on-chip operational amplifiers (Op Amps), 10-bit ADC with computation, Core Independent Peripherals (Complementary Output Generator and Zero Cross Detect), Peripheral Pin Select (PPS), and an enhanced PWM module. The device provides 12 I/O pins, an internal 31kHz to 32MHz oscillator, and active current as low as 35uA/MHz with sleep current of approximately 50nA in XLP mode. The PIC16F1703 uses CMOS flash technology with nanowatt power management, enabling precise analog signal conditioning directly on-chip. The Peripheral Pin Select (PPS) feature allows remapping of digital peripherals to different I/O pins, increasing PCB layout flexibility. With 8-channel 10-bit ADC and zero cross detect for AC signal handling, this part is tailored to cost-sensitive mixed-signal applications. Typical applications include LED lighting control, capacitive touch sensing, sensor signal conditioning, small appliance control, fan control, and battery-powered IoT edge nodes. Designers value the combination of analog peripherals and XLP technology for tight BOM and long battery life. When designing with this MCU, ensure proper decoupling (100nF near VDD) and follow Microchip's MPLAB X IDE for firmware development. The 14-SOIC (SL) package provides hand-solder-friendly access while still supporting high-volume SMT assembly. Avoid relying solely on the internal oscillator for USB timing applications - this part does not include a USB peripheral. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet alone, providing a one-stop engineering reference for BOM selection and second-source qualification.

Devis Contact
PIC16F1703-I/ST - 8-Bit 32MHz 3.5KB Flash MCU | Microchip
PIC16F1703-I/ST

PIC16F1703-I/ST - 8-Bit 32MHz 3.5KB Flash MCU | Microchip

The Microchip Technology PIC16F1703-I/ST is an 8-bit enhanced mid-range flash microcontroller in a 14-pin TSSOP package with 32 MHz CPU speed, 3.5 KB (2K x 14 words) program Flash, 256 bytes SRAM, and 128 bytes of high-endurance EEPROM. It integrates Microchip's XLP extreme-low-power technology with intelligent analog peripherals, including on-chip operational amplifiers, a 10-bit ADC with computation, an 8-bit DAC, and Core Independent Peripherals such as the Configurable Logic Cell (CLC), Complementary Output Generator (COG), and Zero-Cross Detect (ZCD). The device also provides Peripheral Pin Select (PPS) for flexible signal routing on limited-pin packages. A microcontroller (MCU) is an integrated circuit that combines a CPU, program memory, RAM, and peripherals on a single die. Within the product taxonomy, the PIC16F1703 sits in the 8-bit MCU tier (PIC16 family -> 8-bit MCU -> microcontroller -> embedded IC -> semiconductor), positioned between Microchip's baseline PIC10/PIC12 devices and the 16-bit PIC24/dsPIC families. Its enhanced mid-range core executes most instructions in a single 200 ns cycle at 32 MHz and supports 49 instructions with hardware multiply, making it suitable for general-purpose control with deterministic interrupt latency. Key differentiating features include eXtreme Low Power (XLP) operation with currents as low as [DATA_NEEDED: XLP sleep current nA], a 10-bit ADC with up to 28 channels, 8-bit and 5-bit DACs, two op-amps with configurable gain stages, two 10-bit PWM modules, an 8-bit timer, and two comparators. Communication interfaces include EUSART, MSSP (I2C/SPI), and an integrated temperature indicator. PPS remaps digital peripherals to virtually any I/O pin, a critical advantage when designing on the 14-pin TSSOP. Typical applications span consumer white goods, IoT sensor nodes, LED lighting control, battery-powered instruments, and low-cost motor control. The combination of COG and ZCD enables zero-cross switching for TRIAC dimmers and AC line sensing without external circuitry. In a 14-pin TSSOP, the PIC16F1703 targets designs that need more analog integration than a PIC16F1503 but fewer pins than a 20-pin PIC16F1705 variant. When designing with this part, leverage PPS to route peripherals after PCB layout is finalized and use the on-chip op-amps to eliminate external analog components. The COG/ZCD combination can replace dedicated dimmer ASICs, while the ADC's hardware Capacitive Voltage Divider (CVD) simplifies touch and proximity sensing without software overhead.

Devis Contact
PIC16F1703T-I/ML - 8-bit MCU, 3.5KB Flash, 16-pin QFN | Microchip
PIC16F1703T-I/ML

PIC16F1703T-I/ML - 8-bit MCU, 3.5KB Flash, 16-pin QFN | Microchip

The Microchip Technology PIC16F1703T-I/ML is an 8-bit PIC microcontroller combining Intelligent Analog integration with extreme low-power (XLP) technology, packaged in a 16-pin QFN (4x4 mm) with exposed thermal pad. It features 3.5 KB (2K x 14) of Flash program memory, 256 bytes of SRAM, and operates at up to 32 MHz across a 1.8V to 5.5V supply range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripherals into one device. The PIC16F1703 belongs to the PIC16F1xxx family of 8-bit Harvard-architecture MCUs, which sit within the broader category of microcontrollers -> embedded processors -> semiconductors. These devices target general-purpose applications where low cost, low power, and integrated analog peripherals replace discrete op-amps, comparators, and DACs. Key features include on-chip op amps, Core Independent Peripherals (Configurable Logic Cells/COG and Zero Cross Detect/ZCD), Peripheral Pin Select (PPS) for flexible signal routing, a 10-bit ADC, 8-bit DAC, two PWM modules, and EUSART, I2C and SPI interfaces. The XLP variant supports nanoWatt sleep currents below 50 nA typical, making the part suitable for battery-powered IoT and remote sensor nodes. Architecturally, the PIC16F1703 uses a modified Harvard core with a 14-bit instruction word, a hardware multiplier, and an interrupt controller with vectored priorities. The PPS feature allows peripheral functions to be remapped to multiple I/O pins at runtime, simplifying PCB layout when signal paths must change. The 16-pin QFN package supports industrial-grade -40C to +85C operation. Typical applications include consumer appliance control, low-power sensor conditioning, LED lighting drivers, and small motor control loops where the integrated op amps and zero-cross detect remove the need for external analog components. The wide operating voltage range also enables direct connection to single-cell Li-ion or 2x AA battery stacks without an additional regulator. When designing with this MCU, allocate sufficient Flash and stack space for the C library runtime if using the XC8 compiler. Plan the PPS mapping early because some peripherals can be remapped only to specific pins on the 16-pin QFN variant. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, providing selection context that complements Microchip's official documentation.

Devis Contact
PIC16F1703T-I/ST - 8-bit 32MHz 3.5KB Flash MCU 14-TSSOP | Microchip
PIC16F1703T-I/ST

PIC16F1703T-I/ST - 8-bit 32MHz 3.5KB Flash MCU 14-TSSOP | Microchip

The Microchip Technology PIC16F1703T-I/ST is an 8-bit PIC16F microcontroller featuring 3.5KB (2K x 14) of Flash program memory, 256 bytes of RAM, and a 10-bit ADC, all integrated into a 14-pin TSSOP package with a 32MHz maximum operating frequency. The device targets general-purpose low-power embedded designs and ships in tape-and-reel packaging for high-volume SMT assembly. What is a PIC16F microcontroller? The PIC16F family is Microchip's enhanced mid-range 8-bit MCU line built on a RISC architecture, optimized for low power consumption through the XLP (eXtreme Low Power) technology umbrella. MCUs in this class typically integrate Flash program memory, SRAM, on-chip peripherals (ADC, comparators, timers), and communications modules (I2C/SPI/EUSART) onto a single die, serving the power-management, sensor-interface, and consumer-appliance markets that do not require 32-bit performance. Key features of the PIC16F1703 include on-chip operational amplifiers (Op Amps), Core Independent Peripherals such as the Configurable Logic Cell (CLC) and Zero Cross Detect (ZCD), and Peripheral Pin Select (PPS) for flexible signal routing. The 10-bit ADC with computation support accelerates sensor signal conditioning, while the integrated op-amps reduce external analog component count. PPS allows digital peripheral I/O to be remapped to a wide range of physical pins, simplifying PCB layout when board constraints shift late in design. Architecturally, the PIC16F1703 uses a Harvard RISC core with a 14-bit instruction word, a single-cycle instruction execution at 32MHz (200ns instruction time), and hardware stack support. The on-chip voltage regulator allows direct operation from 1.8V to 5.5V supplies, making the device compatible with both 3.3V and 5V system rails. XLP technology enables nanoWatt sleep modes with sub-µA current consumption, extending battery life in IoT and remote-sensor nodes. Typical applications include LED lighting controllers, battery-powered sensor nodes, small appliance control boards, smoke and CO detectors, and general-purpose logic-replacement modules. The combination of integrated op-amps and a 10-bit ADC makes it well-suited for closed-loop analog control, while PPS and CLC support discrete glue-logic replacement. The 14-TSSOP footprint is among the smallest standard MCU packages, enabling compact PCB designs. When designing with this device, ensure adequate decoupling on VDD (a 0.1µF ceramic plus a bulk cap) and place the ICSP/ICD pins on accessible header pads for in-circuit programming and debugging. Confirm that the chosen clock configuration (HFINTOSC vs external crystal) meets the timing accuracy required by the application. Review the device's electrical characteristics section for I/O pin loading rules when driving LEDs or relays directly from GPIO.

Devis Contact
PIC16F1704-E/ML - 8-bit MCU, 7KB Flash, 32MHz, 16-QFN | Microchip
PIC16F1704-E/ML

PIC16F1704-E/ML - 8-bit MCU, 7KB Flash, 32MHz, 16-QFN | Microchip

The Microchip Technology PIC16F1704-E/ML is an 8-bit PIC16F microcontroller featuring 7KB (4K x 14) of Flash program memory and 512 bytes of RAM, running at up to 32 MHz, and packaged in a 16-pin QFN (4x4 mm) with exposed thermal pad. It integrates on-chip op amps, a 10-bit ADC, an 8-bit DAC, high-speed comparator, CCP/PWM, complementary output generator (COG), Zero Cross Detect (ZCD), Configurable Logic Cell (CLC), and Peripheral Pin Select (PPS), consolidating what would otherwise be a multi-chip analog/digital signal chain onto a single MCU. The PIC16F1704 belongs to the PIC16F170X/171X family of PIC microcontrollers targeted at cost-sensitive mixed-signal designs. An 8-bit microcontroller (MCU) is a small, self-contained computing device built around an 8-bit data path, an ALU, on-chip program memory, RAM, and a rich set of peripherals. PIC microcontrollers from Microchip use a RISC-style modified Harvard architecture with Flash program memory and are widely adopted in embedded systems spanning consumer, industrial, and automotive applications. Within the broader taxonomy, PIC16F MCUs sit between smaller PIC10/PIC12 devices and larger PIC18/PIC24 families, offering a balance of footprint, cost, and peripheral integration. Key features of the PIC16F1704-E/ML include eXtreme Low Power (XLP) technology for battery-friendly sleep currents, Peripheral Pin Select (PPS) for flexible signal routing, core-independent peripherals (CLC, COG, ZCD) that offload timing-critical tasks from the core, and a high-speed comparator with DAC reference. The combination of op amps, DAC, and 10-bit ADC makes the part a strong fit for sensor conditioning and closed-loop control applications. The 32 MHz internal oscillator provides 8 MIPS of computational throughput. From an architecture perspective, the PIC16F1704 uses a 14-bit instruction word optimized for compiled C code density, with hardware stack and interrupt controller supporting prioritized events. The PPS module allows most digital peripherals to be remapped to multiple I/O pins, simplifying PCB layout. The 16-QFN package exposes a thermal pad, allowing dissipation of up to 800 mW in properly designed layouts. Typical applications include LED lighting control (constant-current drivers using COG/PWM), TRIAC-based AC switching (using ZCD), battery-powered sensor nodes (leveraging XLP), fan and small motor control (with CCP/PWM + comparator), and consumer appliance user interfaces. For designers who need more memory or additional I/O, Microchip offers the PIC16F1705, PIC16F1708, and PIC16F1709 in compatible footprints.

Devis Contact
PIC16F1704-E/P - 8-bit 32MHz 7KB Flash MCU | Microchip DIP-14
PIC16F1704-E/P

PIC16F1704-E/P - 8-bit 32MHz 7KB Flash MCU | Microchip DIP-14

The Microchip Technology PIC16F1704-E/P is an 8-bit PIC® XLP™ microcontroller featuring 7KB Flash program memory, 512 bytes RAM, and a 32MHz internal oscillator in a 14-pin PDIP through-hole package. The -E suffix denotes the -40°C to +125°C extended industrial temperature grade, while the /P designator specifies the PDIP-14 package. This MCU combines intelligent analog integration with extreme low-power (XLP) operation, including on-chip op amps, 10-bit ADC, 8-bit DAC, and Core Independent Peripherals such as Configurable Logic Cells (CLC), Complementary Output Generator (COG), and Zero Cross Detect (ZCD). An 8-bit PIC microcontroller is a RISC-based CMOS processor that executes single-cycle instructions in 200 nanoseconds at 32MHz, providing deterministic real-time control for embedded applications. PIC microcontrollers belong to the broader category of microcontrollers (MCUs), which are single-chip computers integrating CPU, memory, and peripherals; they sit within the integrated circuit (IC) family and serve applications from consumer appliances to industrial sensor interfaces. Key differentiating specifications include on-chip op amps for analog signal conditioning, a 10-bit ADC with computation, an 8-bit DAC for voltage reference generation, and Peripheral Pin Select (PPS) for flexible I/O mapping. The device also integrates Enhanced Universal Synchronous/Asynchronous Receiver Transmitter (EUSART), I2C, and SPI interfaces, providing connectivity to sensors, displays, and communication modules without requiring external peripheral ICs. The PIC16F1704 architecture uses an enhanced mid-range 16-bit instruction word with a 14-bit program memory bus, optimizing code density. Core Independent Peripherals such as CLC and COG execute logic functions without CPU intervention, enabling deterministic timing for motor control, power conversion, and signal generation tasks. PPS allows peripheral signals to be remapped to different I/O pins, simplifying PCB layout and reducing design constraints. Typical applications include IoT sensor nodes, battery-powered handheld instruments, LED lighting controllers, consumer appliance interfaces, and industrial process control loops. The wide -40°C to +125°C operating range supports automotive under-hood and outdoor industrial deployments where temperature extremes are routine. When designing with this MCU, ensure adequate decoupling by placing a 0.1µF ceramic capacitor adjacent to each VDD pin and a bulk capacitor on the power rail. The internal 32MHz oscillator eliminates the need for external crystals in cost-sensitive designs, but crystals provide better frequency accuracy for timing-critical UART or USB applications. This page synthesizes distributor pricing, drop-in alternative recommendations, and practical engineering design notes not consolidated in the manufacturer datasheet alone.

Devis Contact
PIC16F1704-E/ST - 8-Bit 32MHz 7KB Flash MCU 14-TSSOP | Microchip
PIC16F1704-E/ST

PIC16F1704-E/ST - 8-Bit 32MHz 7KB Flash MCU 14-TSSOP | Microchip

The Microchip Technology PIC16F1704-E/ST is an 8-bit PIC microcontroller from the PIC16F170X/171X family, featuring a 32 MHz CPU core, 7 KB (4K x 14) of Flash program memory, and 512 bytes of SRAM, housed in a 14-pin TSSOP (Thin Shrink Small Outline Package) suited for cost-sensitive and space-constrained embedded designs. The part carries the -E extended temperature grade, qualified for -40 °C to +125 °C operation, making it suitable for industrial and harsh-environment deployments. What is a PIC16 microcontroller? PIC16 microcontrollers are 8-bit reduced-instruction-set computing (RISC) microcontrollers from Microchip Technology, positioned between the baseline PIC10/12 families and the mid-range PIC18 line, and belong to the broader category of microcontrollers -> microcontrollers (MCU) -> 8-bit MCU -> RISC MCU -> embedded processors -> semiconductor. They are widely adopted for general-purpose embedded control because of their deterministic instruction execution, mature toolchain (MPLAB X IDE + XC8 compiler), and a deep ecosystem of application notes and code examples. The PIC16F1704 integrates Microchip's Intelligent Analog features directly on-die, including a high-speed comparator, a 10-bit ADC, two operational amplifiers, an 8-bit DAC, a Zero-Cross Detect (ZCD) module, and Complementary Output Generator (COG). Additional Core Independent Peripherals (CIP) include Configurable Logic Cells (CLC) and Peripheral Pin Select (PPS), which allow many peripherals to be remapped to a broad set of I/O pins, increasing layout flexibility. Twelve general-purpose I/O pins are exposed alongside EUSART, I2C, and SPI serial interfaces. The device belongs to the XLP (eXtreme Low Power) family, supporting sleep currents in the nanoamp range and active currents in the microamp range depending on clock configuration. Power is supplied from a single rail between 1.8 V and 5.5 V. Built-in peripherals include brown-out reset, power-on reset, watchdog timer, and PWM, enabling stand-alone operation without external supervision components. Typical applications include consumer white goods, low-cost sensor conditioning boards, LED lighting controllers, battery-powered IoT edge nodes, handheld instrumentation, and automotive body and accessory subsystems. The combination of on-chip op-amps and a 10-bit ADC allows direct interfacing with analog sensors without an external signal chain. When designing with the PIC16F1704, reserve adequate decoupling capacitance (100 nF close to VDD plus a bulk 1-10 µF) and follow Microchip's TSSOP-14 PCB layout recommendations. Use the PPS feature to optimize PCB routing, and validate AC/DC characteristics against the PIC16(L)F1704/8 datasheet before production release. This page synthesizes distributor pricing, drop-in alternatives from the PIC16F170X family and cross-brand candidates, application guidance, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC16F1704-I/P - 8-bit 32MHz 7KB Flash MCU w/Op Amps | Microchip
PIC16F1704-I/P

PIC16F1704-I/P - 8-bit 32MHz 7KB Flash MCU w/Op Amps | Microchip

The Microchip Technology PIC16F1704-I/P is an 8-bit PIC16F microcontroller featuring Intelligent Analog integration and eXtreme Low Power (XLP) technology, housed in a 14-pin PDIP (P) through-hole package. It runs at 32 MHz with a 200 ns instruction cycle, includes 7 KB (4K x 14) of Flash program memory, 512 bytes of RAM, and integrates on-chip operational amplifiers, a 10-bit ADC with computation, and Core Independent Peripherals (CLC, COG, Zero Cross Detect). A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals. The PIC16F1704 belongs to Microchip's enhanced mid-range PIC16 family, sitting within the 8-bit MCU segment of the broader microcontroller taxonomy: MCU -> 8-bit MCU -> enhanced mid-range -> PIC16F -> PIC16F17x family. This device combines RISC Harvard architecture with C-compiler-optimized instruction set (49 instructions) and direct LED drive capability. Key differentiating features include on-chip op amps eliminating external analog circuitry, Peripheral Pin Select (PPS) for flexible signal routing, 10-bit ADC with automated averaging/computation, and Core Independent Peripherals that operate autonomously without CPU intervention. The device also features Zero Cross Detect for AC signal applications, Complementary Output Generator (COG) for power switching, and Configurable Logic Cells (CLC) for hardware logic customization. XLP technology delivers deep sleep currents below 1 µA. The architecture uses a 14-bit instruction word with 8-bit data path, 16-level hardware stack, and 31 kHz internal oscillator plus 32 MHz HFINTOSC. The integrated op amps can be configured as amplifiers, comparators, or ADC drivers, eliminating external components and reducing BOM cost. PPS allows remapping of digital peripherals to any I/O pin, simplifying PCB layout. Typical applications include LED lighting control, sensor signal conditioning with on-chip op amps, battery-powered IoT sensor nodes leveraging XLP, consumer appliance control, and small motor control using COG and PWM. The combination of analog integration and low power makes it ideal for cost-sensitive general-purpose embedded designs. When designing with this device, leverage PPS to simplify PCB layout and use Core Independent Peripherals to offload tasks from the CPU for lower power and latency. Note that the 14-pin PDIP package is suitable for prototyping and through-hole assembly, not high-volume SMT production. Use MPLAB X IDE and XC8 compiler for development. This page synthesizes distributor pricing, drop-in PIC16F1xxx family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Devis Contact
PIC16F1704-I/SL - 8-bit 32MHz XLP MCU 7KB Flash | Microchip
PIC16F1704-I/SL

PIC16F1704-I/SL - 8-bit 32MHz XLP MCU 7KB Flash | Microchip

The Microchip Technology PIC16F1704-I/SL is an 8-bit PIC microcontroller from the PIC® XLP™ 16F family, featuring 7KB (4K x 14 words) of Flash program memory, 512 bytes of SRAM, and a maximum CPU clock of 32MHz, housed in a 14-pin SOIC (SL) package. The device operates from 2.3V to 5.5V and integrates intelligent analog peripherals including on-chip operational amplifiers, a 10-bit ADC, and core independent peripherals such as Configurable Logic Cells (CLC), Complementary Output Generator (COG), and Zero Cross Detect (ZCD). The 'I' suffix indicates the industrial temperature grade of -40C to +85C. An 8-bit PIC microcontroller is a CMOS RISC-based computing core designed for deterministic, low-power embedded control. Within the broader taxonomy, PIC16F parts sit between PIC10/12/14 baseline families (smaller memory, fewer peripherals) and PIC18/PIC24 higher-end families (more memory, wider buses, DSP). The 'F' denotes Flash program memory (re-programmable in-circuit), and 'XLP' designates Microchip's eXtreme Low Power platform with nanoWatt sleep modes and sub-microamp RTC operation, making the PIC16F1704 well suited to battery-powered applications. Key specifications include: 32MHz internal oscillator, 14 I/O pins with Peripheral Pin Select (PPS) for flexible signal routing, hardware multiplier, 10-bit ADC with computation, two op-amps, one 8-bit DAC, two comparators, and enhanced PWM with dead-band control. The device supports ICSP (In-Circuit Serial Programming) for field firmware updates and includes an on-chip debugger interface. Architecturally, the PIC16F1704 uses an 8-bit ALU with a 14-bit instruction word, providing a code density advantage over traditional 8-bit CISC architectures. The Harvard bus structure separates instruction and data paths to allow simultaneous fetch and execute, and the 31-level hardware stack supports modular C programming. The MIPS/MHz ratio of 1 ensures deterministic interrupt latency critical for real-time control. Typical applications include: sensor signal conditioning using the integrated op-amps, low-power IoT sensor nodes leveraging XLP sleep modes, LED lighting control via the COG and PWM peripherals, battery management and metering, and consumer appliances requiring mixed-signal integration. The combination of analog front-end and digital control in a single 14-pin package reduces BOM cost and PCB area. When designing with this part, evaluate whether the 4K-word flash, 512-byte SRAM, and 14 I/O pins match application requirements. PPS provides pin-function remapping without board changes, but the 14-pin SOIC package has limited GPIO expansion; consider PIC16F1705 (20-pin) or PIC16F1708/1709 (28/40-pin) variants for higher I/O count. The internal 32MHz oscillator eliminates an external crystal but may not meet USB or precise timing needs. This page synthesizes distributor pricing from DigiKey/Mouser, drop-in package-compatible alternatives within the PIC16F family, and practical design notes covering op-amp configuration, ADC averaging, and XLP sleep-current measurements not found in the manufacturer datasheet alone.

Devis Contact
PIC16F1704-I/ST - 8-bit 32MHz 7KB Flash MCU 14-TSSOP | Microchip
PIC16F1704-I/ST

PIC16F1704-I/ST - 8-bit 32MHz 7KB Flash MCU 14-TSSOP | Microchip

The Microchip Technology PIC16F1704-I/ST is an 8-bit PIC16F microcontroller (MCU) running up to 32 MHz, with 7 KB Flash program memory (4K x 14 words), 512 B RAM, and intelligent analog peripherals, housed in a 14-pin TSSOP (ST) package. It belongs to the PIC16F170X/171X family and pairs an enhanced mid-range core with Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), Complementary Output Generator (COG), Zero-Cross Detect (ZCD), and Peripheral Pin Select (PPS) for hardware-driven functional blocks. What is an 8-bit Flash MCU? An 8-bit Flash microcontroller integrates a CPU, non-volatile Flash program memory, RAM, peripherals, and I/O onto a single chip. The PIC16F1704 fits between smaller 8-pin PIC MCUs and larger 16-bit/32-bit devices, offering deterministic interrupt latency and low power consumption. It sits within the product hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. This makes it well suited to cost-sensitive general-purpose applications that still need on-chip analog. Key features include a 10-bit ADC with computation, two on-chip op-amps (for active filtering, signal conditioning, or PGA), an 8-bit DAC, up to two PWM/CCP modules, an on-chip high-speed comparator, and serial peripherals (EUSART, I2C, SPI). The device supports the XLP (eXtreme Low Power) sleep currents typical of the PIC16F1xxx family, making it suitable for battery-operated and energy-harvesting designs. PPS allows flexible peripheral-to-pin mapping, simplifying PCB routing. Typical applications include LED lighting drivers, battery chargers and monitors, sensor signal conditioning, low-cost fan/thermostat controls, consumer white goods, and portable IoT end-nodes. The op-amp + DAC + ADC trio lets designers replace several discrete analog components with the MCU alone. Designers should review the PIC16F1704 device-family datasheet and the device-specific silicon errata before committing a layout, as some analog channels and PPS mappings differ between pin variants.

Devis Contact
PIC16F1704T-I/SL - 8-Bit 32MHz MCU 7KB Flash | Microchip
PIC16F1704T-I/SL

PIC16F1704T-I/SL - 8-Bit 32MHz MCU 7KB Flash | Microchip

The Microchip Technology PIC16F1704T-I/SL is an 8-bit PIC16F family microcontroller built on the enhanced mid-range core, delivering 32 MHz performance (8 MIPS) from 7KB of Flash program memory, 512 bytes of SRAM, and 256 bytes of EEPROM. It is housed in a 14-pin SOIC (SL) package with industrial -40C to +85C temperature rating and tape-and-reel packaging. An 8-bit microcontroller is a single-chip computer built around an 8-bit data path, integrating CPU, RAM, Flash program memory and peripherals into one device. PIC microcontrollers (Peripheral Interface Controllers) use a RISC architecture with a small instruction set optimized for deterministic, low-power embedded control. The PIC16F1704 sits within Microchip's PIC16F1xxx enhanced mid-range product line, between the 8-bit baseline PIC10/12/16 families and 16-bit PIC24/dsPIC parts, and is targeted at cost-sensitive applications needing integrated analog. Key features of the PIC16F1704 include on-chip operational amplifiers (up to 2), a 10-bit ADC with up to 8 channels, an 8-bit DAC, two high-speed comparators, Core Independent Peripherals (CLC, COG, Zero-Cross Detect), PWM modules, CCP, and serial interfaces (EUSART, I2C, SPI). It also offers Peripheral Pin Select (PPS) for flexible signal routing and XLP (eXtreme Low Power) technology with nanoWatt sleep current as low as 50 nA typical. The PIC16F1704's enhanced mid-range core with a 14-bit instruction word delivers 8 MIPS at 32 MHz while preserving code compatibility with PIC10/12/16 baseline cores. Internal 32 MHz oscillator accuracy eliminates external crystal cost in many designs, and PPS allows designers to remap peripheral I/O to multiple physical pins - a significant advantage over older fixed-pin PIC parts. Typical applications include sensor signal conditioning with on-chip op-amps, LED lighting control with COG/CLC, battery chargers, motor control loops, low-power IoT edge nodes, and consumer white goods. The integrated analog front-end reduces external component count versus PIC16F1xxx parts without op-amps. When designing with this device, place a 0.1 uF decoupling capacitor within 5 mm of VDD, add a 10 uF bulk capacitor on VDD if the supply impedance exceeds 1 ohm, and use the PPS registers to route peripherals only to available remappable pins. Program the configuration words to set the oscillator mode, WDT, and code-protect before final code lock-down. This page synthesizes distributor pricing, drop-in Microchip same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Devis Contact
PIC16F1705-E/ML - 8-bit MCU, 32MHz, 14KB Flash, 16-QFN | Microchip
PIC16F1705-E/ML

PIC16F1705-E/ML - 8-bit MCU, 32MHz, 14KB Flash, 16-QFN | Microchip

The Microchip Technology PIC16F1705-E/ML is an 8-bit PIC16F microcontroller unit (MCU) featuring 14KB Flash program memory, 1KB RAM, and a 32MHz internal oscillator, housed in a 16-pin QFN (4x4 mm) package with extended (-40C to +125C) operating temperature. It integrates Intelligent Analog peripherals - on-chip operational amplifiers, an 8-bit DAC, a 10-bit ADC, high-speed comparator, and zero-cross detect - alongside Core Independent Peripherals (CLC, COG, NCO) and Peripheral Pin Select (PPS), enabling flexible pin mapping for compact designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of peripheral interfaces. Within the broader taxonomy, the PIC16F1705 belongs to the 8-bit MCU category (PIC16 family -> 8-bit PIC -> PIC microcontroller -> MCU -> microcontroller -> embedded processor -> semiconductor). Compared with 32-bit ARM Cortex-M parts, an 8-bit MCU consumes far less power, costs less, and delivers deterministic interrupt latency suitable for sensor nodes, human-interface devices, and battery-powered edge sensing. Key features of the PIC16F1705 include eXtreme Low Power (XLP) technology with deep-sleep currents in the nanoampere range, 12-bit ADC with computation, two operational amplifiers usable as rail-to-rail input stages, an 8-bit DAC, a 5-bit DAC, two comparators, a Zero-Cross Detect (ZCD) module, Configurable Logic Cell (CLC) blocks, Complementary Output Generator (COG), Numerically Controlled Oscillator (NCO), EUSART, I2C/SPI, CCP and PWM modules, and up to 12 I/O pins. The 32MHz internal oscillator eliminates the need for an external crystal in many designs. The PIC16F1705 uses a Harvard-architecture RISC core with a 14-bit instruction word and a single-cycle ALU, delivering ~32MIPS throughput. PPS allows remapping of digital peripherals to nearly any I/O pin, which simplifies PCB layout and reduces the need for trace-crossing rework. The on-chip op amps - a rarity in this package class - enable single-chip signal conditioning for sensor interfaces. Typical applications include IoT sensor nodes, battery-powered wireless sensor transmitters, LED lighting controllers with smooth dimming (ZCD + COG), small motor control loops, smoke/CO detectors, remote controls, capacitive-touch human-interface devices, and general-purpose logic-replacement designs. The extended -40C to +125C temperature range and AEC-Q100-style robustness make it suitable for industrial and harsh-environment deployments. When designing with this MCU, allocate at least one decoupling capacitor (100nF X7R) per VDD pin and a 10uF bulk capacitor near the IC. The ICSP/ICD pins (RB6/RA0 and RB7/RA1 equivalents on this device) must be brought out to a programming header or Tag-Connect footprint to support in-circuit debugging and field firmware updates. This page synthesizes distributor pricing, parametric drop-in alternatives from Microchip's pin-compatibility chart, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC16F1705-E/P - 8-bit 32MHz XLP MCU 14KB Flash DIP-14 | Microchip
PIC16F1705-E/P

PIC16F1705-E/P - 8-bit 32MHz XLP MCU 14KB Flash DIP-14 | Microchip

The Microchip Technology PIC16F1705-E/P is an 8-bit PIC16F family microcontroller featuring 14KB Flash program memory, 1KB SRAM, 32MHz internal oscillator, and on-chip Intelligent Analog peripherals, housed in a 14-pin PDIP through-hole package with -40C to +125C extended operating range. It combines Intelligent Analog integration with extreme low-power (XLP) technology for general-purpose embedded applications. A PIC microcontroller (Programmable Interface Controller) is a class of 8/16/32-bit RISC microcontrollers originally developed by Microchip and widely used in embedded systems for control-oriented tasks such as sensor interfacing, motor control, and low-power IoT endpoints. Within the Microchip taxonomy, the PIC16F1705 belongs to the PIC16F1 mid-range enhanced family, which adds Core Independent Peripherals (CIPs) such as CLC, COG, and Zero-Cross Detect to the traditional PIC16 mid-range core, enabling autonomous hardware-level task execution. Key differentiating specifications include 14KB (8K x 14 words) Flash, 1024 bytes SRAM, 32MHz maximum CPU speed (8 MIPS), a 10-bit ADC with computation, two on-chip op-amps, an 8-bit DAC, a high-speed comparator, two CCP modules producing complementary PWM output, plus CLC, COG, ZCD, PPS, and EUSART peripherals with I2C/SPI support. The device operates from 2.3V to 5.5V, supports nanoWatt XLP sleep modes with sub-uA currents, and includes a 32kHz LFINTOSC for low-power timing. Architecturally, the PIC16F1705 implements an enhanced mid-range 8-bit RISC core with a 14-bit instruction word, hardware multiplier, and Interrupt-on-Change (IOC) on most I/O pins. Core Independent Peripherals (CLC, COG, NCO, ZCD, CWG) operate without CPU intervention, allowing deterministic event handling while the CPU remains in sleep, which is critical for ultra-low-power sensor nodes. Peripheral Pin Select (PPS) provides flexible signal routing on the limited 14-pin package. Typical applications include consumer white goods (sensor front-ends, AC zero-cross detection with the ZCD peripheral and dimming using COG), low-power battery-powered IoT nodes that exploit the XLP sleep current, capacitive-touch user interfaces driven by on-chip op-amps and the ADC with computation, and small BLDC/PWM motor-control loops where the on-chip op-amp amplifies current-sense feedback. Industrial sensor conditioning and LED driver control are common use cases. Designers should plan for adequate decoupling (100 nF plus 10 uF bulk near VDD), in-circuit serial programming (ICSP) header with separate PGED/PGEC lines, and use of PPS to remap EUSART and PWM to convenient pins. For EMI robustness, place a ferrite bead on VDD if operating near a switching converter. This page synthesizes distributor pricing, Microchip cross-reference data, side-by-side parametric comparison against same-package alternatives, and PCB/EMC design notes that go beyond the manufacturer datasheet, giving an engineer everything needed to evaluate and adopt the PIC16F1705-E/P in production.

Devis Contact
PIC16F1705-E/SL - 8-bit MCU, 14KB Flash, 32MHz XLP | Microchip
PIC16F1705-E/SL

PIC16F1705-E/SL - 8-bit MCU, 14KB Flash, 32MHz XLP | Microchip

The Microchip Technology PIC16F1705-E/SL is an 8-bit PIC microcontroller in the PIC16F family, featuring 14KB (8K x 14) Flash program memory, 1KB RAM, and a 32MHz internal oscillator, housed in a 14-pin SOIC package with the -E extended (-40C to +125C) operating temperature range. The device combines Microchip's XLP (eXtreme Low Power) technology with intelligent analog peripherals including on-chip operational amplifiers, a 10-bit ADC, an 8-bit DAC, comparators, and Zero-Cross Detect, making it well suited for mixed-signal general-purpose applications. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU, program memory (Flash), data memory (RAM), and peripheral interfaces on a single die. Within the embedded electronics hierarchy, an MCU sits between simple discrete logic and full microprocessors; the PIC16F family occupies the mid-range 8-bit tier that trades raw clock speed for deterministic latency, low power consumption, and rich on-chip analog integration. XLP further extends battery life by offering nanoWatt sleep currents in the microamp range, enabling years of operation from a single coin cell. The PIC16F1705's key differentiating features include Core Independent Peripherals (CLC, COG, NCO, CCP/PWM), Peripheral Pin Select (PPS) for flexible signal routing, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), and I2C/SPI interfaces. Two on-chip op amps and a Zero-Cross Detect block allow direct interfacing with sensors and triac-driven loads without external analog front-end components. The 10-bit ADC with up to 12 channels and computation capabilities supports automated averaging and threshold comparison in firmware. Typical applications include LED lighting controllers, capacitive touch user interfaces, sensor signal conditioning, small appliance control, battery-powered IoT sensor nodes, and consumer white goods. Its 14-pin SOIC footprint and Microchip ecosystem (MPLAB X IDE, XC8 compiler, MCC code configurator) make it accessible for both prototyping on Curiosity development boards and high-volume production. When designing with the PIC16F1705, observe the supply voltage range of 2.3V to 5.5V, place a 0.1uF decoupling capacitor adjacent to each VDD pin, and configure PPS carefully to avoid pin conflicts between remappable peripherals. For noise-sensitive analog measurements, disable unused digital inputs and use the dedicated ANSEL register to prevent digital input buffers from corrupting the ADC result. This page synthesizes distributor pricing, drop-in same-package alternatives, application-specific design guidance, and a comparison table with parametric detail that the manufacturer datasheet alone does not provide.

Devis Contact
PIC16F1705-I/P - 32MHz XLP 8-Bit MCU | Microchip
PIC16F1705-I/P

PIC16F1705-I/P - 32MHz XLP 8-Bit MCU | Microchip

The Microchip Technology PIC16F1705-I/P is an 8-bit flash microcontroller operating at up to 32 MHz, with 14 KB of program memory, 1024 bytes of RAM, and a 10-bit ADC in a 14-pin PDIP package. It combines Intelligent Analog integration with extreme low-power XLP operation and includes on-chip operational amplifiers, Core Independent Peripherals, Peripheral Pin Select, and Zero-Cross Detection. A microcontroller is a programmable integrated circuit containing a processor core, memory, and peripherals on one semiconductor die. Within the product hierarchy, the PIC16F1705 is a PIC16 8-bit flash microcontroller, a compact embedded-control platform used to sense inputs, run control algorithms, and operate actuators. Its integrated analog resources can reduce component count in cost-sensitive designs that need measurement, signal conditioning, and control functions without requiring a separate analog IC. The PIC16F1705-I/P provides 8K words of flash program memory, equal to 14 KB, alongside 1024 bytes of data memory. Its 10-bit ADC supports analog-to-digital conversion, while the integrated operational amplifiers can implement signal-conditioning or current-feedback functions. Core Independent Peripherals include CLC and COG, and Zero-Cross Detection supports AC-related timing functions. Peripheral Pin Select provides flexible routing options, and XLP technology targets low-power operation in embedded products. The device operates from a single low-voltage supply and uses a compact 14-pin through-hole package suitable for prototypes, control boards, industrial equipment, and educational platforms. At a maximum clock frequency of 32 MHz, the MCU provides useful processing headroom for protocol handling, state machines, signal conditioning, and mixed-signal control. Peripheral operation can continue in ways that reduce unnecessary CPU activity when the application is primarily waiting for an external event. Typical uses include low-cost sensor interfaces, industrial control modules, power-conversion controllers, lighting controls, compact instruments, and low-power embedded systems. The ADC, two on-chip operational amplifiers, CLC, COG, Zero-Cross Detection, and Peripheral Pin Select make the PIC16F1705 especially useful when the board area or component count must remain small. Its XLP feature set also makes it relevant to battery-operated and duty-cycled products. When designing around this controller, assign the analog inputs and op-amp pins according to the pin-description table in the manufacturer datasheet, and confirm the operating voltage and current limits against the exact device variant. Keep decoupling capacitance close to the supply pins, use a suitable oscillator configuration for timing accuracy, and verify that the chosen peripheral outputs remain available after Peripheral Pin Select assignments. This product page combines the manufacturer specifications, package information, practical application guidance, and drop-in replacement analysis to support schematic planning and component selection. It also highlights where a true pin-compatible replacement is available and where package or peripheral differences require a design review.

Devis Contact
PIC16F1705-I/SL - 8-bit 32MHz MCU 14KB Flash 14-SOIC | Microchip
PIC16F1705-I/SL

PIC16F1705-I/SL - 8-bit 32MHz MCU 14KB Flash 14-SOIC | Microchip

The Microchip Technology PIC16F1705-I/SL is a cost-effective 8-bit intelligent-analog flash microcontroller in a 14-pin SOIC (SL) package. It combines 14KB of Flash program memory, 1024 bytes of RAM, an 8-bit CPU core running at up to 32 MHz, and on-chip analog peripherals including operational amplifiers, a 10-bit ADC with computation, 8-bit/10-bit PWMs and Core Independent Peripherals (CLC, COG, Zero-Cross Detect). The device is part of the PIC16 XLP (eXtreme Low Power) family, delivering typical sleep currents in the nanoampere range. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a configurable set of digital and analog peripherals. Within the broader taxonomy, the PIC16F1705 belongs to the 8-bit MCU category, which sits below 32-bit MCUs in processing capability but excels in deterministic interrupt latency, low power, and low BOM cost. The PIC16F1705 series specifically targets "intelligent analog" applications where on-chip op amps, DACs, ADCs and PWM generation reduce or eliminate external analog ICs. Key features of the PIC16F1705-I/SL include 12 I/O pins, Peripheral Pin Select (PPS) for flexible signal routing, an integrated temperature indicator, an enhanced mid-range CPU instruction set (49 instructions / 16 stack levels), and a wide operating voltage range of 2.3V to 5.5V. The XLP nanoWatt technology provides multiple low-power modes (Sleep, Doze, Idle, and Peripheral Module Disable) suitable for battery-powered and energy-harvesting designs. Typical applications include sensor signal conditioning (using the on-chip op amps as gain/buffer stages), LED lighting control (using COG for constant-current regulation), battery chargers, small motor control loops, and IoT edge nodes where low sleep current is critical. The PIC16F1705-I/SL is the SOIC-14 variant of the PIC16F1705 family, which also ships in PDIP-14 (P), TSSOP-14 (ST), and QFN-16 (ML) options. When designing with this part, plan I/O assignment before PCB layout: PPS lets you remap digital peripherals to almost any pin, but analog pins are fixed. The on-chip op amps require careful reference and output routing to avoid loading the ADC inputs. For lowest power, transition the CPU to Sleep and use an interrupt (e.g., ZCD on AC mains) to wake only when needed. This page synthesizes real-time distributor pricing, drop-in alternatives in the 14-SOIC footprint, datasheet-grade specifications, and engineering design notes not consolidated in any single manufacturer document.

Devis Contact
PIC16F1705-I/ST - 8-Bit 32MHz MCU 14KB Flash XLP | Microchip
PIC16F1705-I/ST

PIC16F1705-I/ST - 8-Bit 32MHz MCU 14KB Flash XLP | Microchip

The Microchip Technology PIC16F1705-I/ST is an 8-bit PIC microcontroller featuring 14KB (8K x 14 words) of Flash program memory, 1KB of RAM, and a maximum CPU clock of 32 MHz, housed in a 14-pin TSSOP package. It belongs to the PIC16F XLP family and combines Intelligent Analog integration (on-chip op amps, 10-bit ADC, 8-bit DAC, comparators, Zero-Cross Detect) with extreme low-power XLP peripherals to suit a wide variety of general-purpose applications. The -I suffix denotes the industrial -40°C to +85°C temperature grade, and /ST designates the 14-lead Thin Shrink Small Outline Package (TSSOP-14). An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, typically used for embedded control in cost- and power-sensitive applications. The PIC16F1705 sits within the broader hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor device. Compared with 32-bit MCUs, 8-bit parts such as the PIC16F1705 consume less power, retain simpler toolchains, and remain preferred for simple sensor, motor, and human-interface tasks where deterministic behavior at low MHz is more valuable than raw compute throughput. Key differentiating features include two on-chip operational amplifiers (a rare integration for an 8-bit MCU), Core Independent Peripherals (CLC, COG, Zero-Cross Detect) that offload logic from the CPU, Peripheral Pin Select (PPS) for flexible signal routing, and XLP technology for nanoWatt sleep currents. The device supports 10-bit ADC with computation, 8-bit DAC, PWM modules, EUSART, MSSP (I2C/SPI), and up to 12 I/O pins in this 14-pin TSSOP package. The combination of analog integration and zero-cross detection is purpose-built for sensor conditioning, lighting control, and small appliance designs. Architecture-wise, the PIC16F1705 uses an enhanced mid-range PIC16 core with a hardware multiplier, a 16-level hardware stack, and a modified Harvard bus that separates instruction and data fetches. Internal oscillator calibration and on-chip debug support via ICD reduce external component count and accelerate time-to-prototype. According to Microchip datasheet 40001729C, the device operates from 1.8V to 5.5V, allowing direct connection to single-cell Li-ion, 2x AA, or 5V rails commonly found in consumer and industrial products. Typical applications include AC zero-cross switching control (TRIAC/SSR drive), LED lighting ballasts, small motor control loops via COG, sensor signal conditioning using the on-chip op amps, and battery-powered IoT end-nodes where XLP nanoWatt sleep currents extend coin-cell life. The integrated 10-bit ADC with computation and dedicated op amps also suit cost-sensitive instrumentation and HVAC fan-control designs. When selecting this part, designers should confirm the 14-pin TSSOP footprint matches the available PCB area and verify the 1KB RAM is sufficient for the application state machine. For designs needing more I/O, peripherals, or memory, the family sibling PIC16F1709 (20-pin) or PIC16F1713/1716 are drop-in alternatives within the same software ecosystem and toolchain (MPLAB X IDE, XC8 compiler). This page aggregates distributor pricing, parameter-level comparison versus same-package PIC16F family siblings, drop-in alternatives, and practical design guidance not found in a single manufacturer datasheet.

Devis Contact
PIC16F1705T-I/ML - 8-bit MCU, 14KB Flash, 32MHz, 16-QFN | Microchip
PIC16F1705T-I/ML

PIC16F1705T-I/ML - 8-bit MCU, 14KB Flash, 32MHz, 16-QFN | Microchip

The Microchip Technology PIC16F1705T-I/ML is an 8-bit PIC® XLP™ microcontroller delivering 32 MHz CPU performance with 14 KB Flash program memory (8K x 14 words), 1024 bytes of RAM, and 256 bytes of EEPROM, all integrated in a compact 16-pin QFN (4x4 mm) package with exposed thermal pad. This tape-and-reel variant features the standard PIC16F1705 silicon die combined with Microchip's eXtreme Low Power (XLP) technology, making it well-suited for battery-operated applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and a set of on-chip peripherals such as timers, ADC, communication interfaces, and I/O pins. Within the broader semiconductor taxonomy, MCUs belong to the microcontroller -> embedded controller -> integrated circuit hierarchy. The PIC16F1705 belongs to the PIC16F1xxx enhanced mid-range family, which targets mixed-signal applications where on-chip analog peripherals (op amps, DAC, comparators) coexist with digital logic. Key features include a 10-bit ADC with up to 12 channels, two operational amplifiers, one 8-bit DAC, two high-speed comparators with a 5-bit DAC reference, Core Independent Peripherals (CLC, COG, Zero Cross Detect), Peripheral Pin Select (PPS), and EUSART plus I²C/SPI serial interfaces. The device operates from 2.3 V to 5.5 V and is rated for the industrial -40 °C to +85 °C temperature range. Architecturally, the PIC16F1705 uses the enhanced mid-range 16-bit instruction word RISC core with a hardware stack and 49 instruction opcodes, providing deterministic interrupt latency and predictable execution times suitable for real-time control loops. The combination of op amps, comparators, DAC, and PWM enables closed-loop analog control without external components. Typical applications include LED lighting control with constant-current regulation, battery chargers, IoT sensor nodes, low-cost motor control, and consumer white goods. The QFN-16 footprint simplifies high-density PCB designs where board real estate is constrained. When designing with this part, allocate the exposed pad (EP) as a continuous copper pour tied to ground to provide both thermal dissipation and a low-impedance ground return. The PPS feature allows flexible assignment of digital peripheral pins to physical I/O, simplifying PCB routing. Note that the 'T' suffix indicates tape-and-reel packaging for high-volume assembly.

Devis Contact