Produits (44 000+)

WM8775SEDS/V 24-Bit 96kHz Stereo ADC | Cirrus Logic
WM8775SEDS/V

WM8775SEDS/V 24-Bit 96kHz Stereo ADC | Cirrus Logic

The Cirrus Logic WM8775SEDS/V is a high-performance stereo audio analog-to-digital converter with a 24-bit resolution, a maximum sampling rate of 96 kHz, and a four-channel input multiplexer. The device is packaged in a 28-pin SSOP and is designed for digitizing multiple analog audio sources used in home hi-fi, automotive, and audiovisual equipment. An audio ADC is an integrated circuit that converts analog audio voltages into a digital representation for processing, storage, transmission, or playback. The WM8775 belongs to the broader ADC and DAC product category, specifically a multiplexed stereo audio ADC. Its four-channel input mixer allows several analog sources to be selected and digitized through the same conversion engine, reducing the need for separate converters when a system must process multiple audio inputs. The primary verified specifications for the WM8775SEDS/V are its 24-bit conversion resolution, 96 kHz sampling capability, stereo ADC architecture, four-channel input multiplexer, I2S digital interface, and 28-pin SSOP package. According to the manufacturer-linked datasheet information in the verified sources, the device is intended for high-performance audio digitization and surround-sound processing applications. The manufacturer datasheet is the authoritative source for detailed electrical limits, clock requirements, analog input ranges, digital timing, recommended application circuits, and package dimensions. Typical application areas include surround-sound processors, home audio equipment, automotive audio systems, and other audiovisual products that require multiple analog audio inputs to be converted into a digital format. In these systems, the multiplexer can select different source signals while the stereo ADC performs the actual conversion. The I2S interface supports integration with digital audio processors, decoders, receivers, and other equipment using compatible serial audio connections. Designers should verify the WM8775SEDS/V pinout, analog input configuration, clocking requirements, digital interface timing, supply recommendations, and decoupling requirements against the manufacturer datasheet before layout. Because the available verified material is primarily distributor and indexed-datasheet information rather than a complete numerical electrical table, unspecified values are marked as [DATA_NEEDED] rather than inferred. The SSOP footprint also requires attention to thermal performance, lead spacing, soldering profile, and analog signal routing. This page combines verified distributor identification, datasheet indexing, package information, application context, comparison structure, and engineering design guidance. It distinguishes documented facts from parameters that require confirmation in the official WM8775 datasheet, helping engineers identify the correct 24-bit, 96 kHz multiplexed stereo ADC without relying on unsupported assumptions.

Devis Contact
WM8776SEFT/V - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8776SEFT/V

WM8776SEFT/V - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8776SEFT/V is a 24-bit stereo audio codec with five-channel input multiplexing, supporting operation up to 192 kHz and supplied in a 48-pin TQFP package measuring 7 mm by 7 mm. The device accepts a 2.7 V to 5.5 V analog supply and a 2.7 V to 3.6 V digital supply, making it suitable for mixed-signal audio systems that require compact conversion and input selection. An audio codec is an integrated circuit that converts analog audio signals into digital PCM data and converts digital playback data back into analog audio. A stereo codec handles two audio channels, while an integrated input multiplexer selects among several physical inputs. The WM8776SEFT/V combines those functions in one device, reducing the number of separate signal-routing and conversion components required in a compact audio subsystem. The principal device ratings include 24-bit resolution, a maximum sample rate of 192 kHz, stereo operation, and a five-channel input multiplexer. Its analog supply range of 2.7 V to 5.5 V accommodates conventional analog signal-chain power levels, while its 2.7 V to 3.6 V digital supply range supports digital interfaces operating within the stated range. These features make the codec applicable to consumer audio equipment, multimedia systems, and other products requiring stereo recording or playback. The WM8776 family is identified in technical documentation as the Stereo CODEC with 5 Channel I/P Multiplexer. Its active operating-temperature range is -25°C to 85°C. The 48-TQFP package provides 48 external connection positions and a 7 mm by 7 mm body footprint, allowing placement in a conventional surface-mount PCB design while maintaining access to power, data, clock, and analog-audio connections. Typical uses include digital recording systems, compact stereo playback equipment, multimedia convergence products, and mixed-signal audio control platforms. The five-channel multiplexer is particularly useful when a design must choose among several analog sources without adding multiple analog switch packages. The 192 kHz capability also supports high-rate audio processing where the surrounding converter, clocking, and signal-chain circuitry supports the same operating rate. Design work should begin with the manufacturer pin-description and application information because the exact analog input selection, digital interface, clock requirements, and external component recommendations depend on the complete board architecture. Verify signal levels and supply sequencing before connecting external circuitry, and use the pin-description table rather than package position alone when assigning PCB tracks. This product page organizes the documented codec capabilities, operating ranges, package information, sourcing path, and engineering guidance into a practical engineering reference. It also identifies where an equivalent part must be reviewed for true pin compatibility instead of being selected solely from similar audio-converter specifications.

Devis Contact
WM8778SEDS/V - 24-Bit 192kHz Stereo Audio Codec | Cirrus Logic
WM8778SEDS/V

WM8778SEDS/V - 24-Bit 192kHz Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8778SEDS/V is a 24-bit, 192kHz stereo audio codec with a digital serial audio interface, supplied in a 28-pin SSOP package. The WM8778 is designed for surround-sound processing in home hi-fi, DVD-RW, and other audiovisual equipment. Its combination of stereo conversion, 192kHz operation, and a 28-SSOP footprint makes it suitable for equipment requiring a dedicated multichannel-audio signal path. An audio codec is an integrated circuit that converts digital audio data into analog signals and converts analog audio into digital data. The codec belongs to the audio interface IC and audio converter hierarchy, combining an audio analog-to-digital converter, digital-to-analog converter, digital audio interface, and associated control functions. The WM8778's 24-bit resolution supports high-fidelity digital audio processing while its 192kHz maximum sampling rate supports high-rate source material. The headline specifications of the WM8778SEDS/V are 24-bit audio resolution, operation up to 192kHz, and stereo codec operation in a 28-SSOP package. According to the manufacturer datasheet, the device also includes a stereo multibit sigma-delta DAC with digital audio input word lengths from 16 to 32 bits and sampling rates from 32kHz to 192kHz. A multiplexor allows either an external analog input or DAC playback to be selected for the line outputs. The architecture combines digital audio processing with analog line-level signal paths. Its digital interface provides access to the stereo codec functions, while the DAC section supports source-rate playback and analog input selection. This arrangement can reduce the number of separate converters required in an audiovisual system, although system-level performance still depends on the external analog network, clock architecture, grounding, and power-supply implementation described in the datasheet. Typical uses include home theater and hi-fi surround-sound processing, DVD-RW equipment, and other audiovisual products that require simultaneous stereo or surround-sound conversion functions. The device can also support digital recording paths where a 24-bit converter and 192kHz sampling capability are useful. Its 28-SSOP package supports conventional surface-mount assembly, but designers should follow the manufacturer footprint and land-pattern guidance during PCB layout. When designing around the WM8778SEDS/V, begin with the manufacturer's pin-description table, recommended application circuit, and interface timing diagrams. Pay particular attention to analog grounding, the separation of analog and digital return paths, clock routing, and the placement of bypass capacitors. These measures are especially important when the codec operates next to switching regulators, high-speed digital logic, or long digital-audio interconnects. This product page combines the exact WM8778SEDS/V ordering information with a practical explanation of the codec architecture, verified package data, application guidance, and a drop-in alternative assessment. It is intended to help engineers evaluate the device quickly while still using the manufacturer datasheet as the controlling document for pin assignments, electrical limits, timing, and application-circuit details.

Devis Contact
WM8781GEDS/V - 24-Bit Stereo ADC | Cirrus Logic | Audio
WM8781GEDS/V

WM8781GEDS/V - 24-Bit Stereo ADC | Cirrus Logic | Audio

Cirrus Logic WM8781GEDS/V is a 24-bit, 192 kHz stereo audio ADC with I2S support, supplied in a 20-pin SSOP package. Its headline specifications are a 24-bit conversion resolution, a maximum sampling rate of 192 kHz, stereo conversion capability, and a 2.7 V to 3.6 V analog supply range. The device also supports 384FS master mode according to the manufacturer product information. These characteristics place it in the high-resolution audio ADC category and make it suitable for digital audio equipment requiring simultaneous left- and right-channel conversion. An ADC is an analog-to-digital converter, a mixed-signal integrated circuit that samples an analog audio voltage and produces a corresponding digital representation. Within the wider semiconductor hierarchy, the WM8781GEDS/V is an audio ADC, a type of data-converter IC and interface IC used for digital audio capture. Its I2S interface provides a conventional connection to digital audio processors, while the 24-bit resolution preserves substantially more amplitude detail than lower-resolution converters. The 192 kHz maximum sampling rate supports high-resolution digital audio workflows and exceeds the 48 kHz rate commonly used for CD-quality playback. The 384FS master-mode capability adds clocking flexibility for systems in which the converter must organize digital audio timing. Stereo operation consolidates two audio channels in one package, reducing the number of separate converters needed in a two-channel audio path. The WM8781GEDS/V operates from a 2.7 V to 3.6 V supply and is specified for an operating temperature range of -25°C to +85°C. Its 20-SSOP package is approximately 5.30 mm wide and 0.209 inch, providing a surface-mount implementation for compact audio products. The supplied distributor information does not provide the complete electrical limits, analog input range, clock requirements, pin mapping, or package height. Typical applications include digital recording equipment, professional audio interfaces, consumer playback systems, active loudspeakers, audio expansion modules, and embedded media platforms. The device can sit between analog microphone or line-level front ends and an I2S-capable DSP, codec, or digital audio controller, converting the analog signal before digital processing and storage. Designers should verify the analog input range, common-mode limits, master and slave clock modes, data format, and exposed thermal and supply requirements against the complete manufacturer datasheet before layout. Input and output return paths should preserve low-noise behavior, while decoupling and grounding should prevent converter and digital-interface noise from coupling into the analog section. This page consolidates verified distributor specifications, package information, functional application guidance, and same-family replacement candidates. It also identifies the missing pinout, detailed timing, absolute maximum ratings, and verified pricing data that engineers should obtain from the manufacturer datasheet before releasing a production design.

Devis Contact
WM8782ASEDS/RV - 24-Bit Stereo Audio ADC | Cirrus Logic
WM8782ASEDS/RV

WM8782ASEDS/RV - 24-Bit Stereo Audio ADC | Cirrus Logic

The Cirrus Logic WM8782ASEDS/RV is a 24-bit stereo audio analog-to-digital converter with a maximum sampling rate of 192,000 samples per second, an I2S digital interface, and a 20-pin SSOP package. It operates from a 2.7 V to 5.5 V analog and digital supply range and is specified for temperatures from -40°C to +85°C. The converter is designed for recordable-media equipment that requires two-channel audio capture with high-resolution digital output. An audio ADC converts left- and right-channel analog input voltages into a sequence of digital samples. Within the data-converter hierarchy, the WM8782ASEDS/RV is a stereo delta-sigma ADC: a specialized analog-to-digital converter that uses continuous-time oversampling and digital filtering to produce a serial digital representation of two analog audio channels. Its 24-bit resolution preserves fine amplitude detail, while the I2S interface provides a compact connection to audio processors, codecs, or digital recording systems. The WM8782ASEDS/RV supports stereo line-level inputs and includes an internal front-end operational amplifier capable of accommodating analog input signals above the normal line-level range. FORMAT and IWL control pins provide compatibility with three industry-standard audio interface configurations, allowing the digital word length and interface format to be selected according to the host processor. A power-down mode is also identified in the product listing, which is useful for reducing consumption when recording is inactive. The device combines a 2.7 V minimum operating voltage with 24-bit conversion and a 192 kSPS maximum rate in a compact surface-mount SSOP-20 package. These characteristics position it for consumer and professional audio capture, including multichannel conversion through multiple stereo devices, digital mixing equipment, and recordable-media products. Its operating-temperature range supports applications beyond ordinary room-temperature consumer environments. A typical implementation routes left and right analog sources through the stereo input network, configures FORMAT and IWL for the connected digital interface, and connects the I2S data, clock, and word-select signals to an audio controller. Decoupling close to the supply pins and controlled return paths are essential because high-resolution audio performance depends on a clean analog reference and low-noise digital coupling. The main design trade-off is the resolution and throughput offered in a relatively compact 20-pin SSOP package. Compared with lower-resolution converters, the 24-bit output preserves more dynamic range but requires careful analog conditioning and clock-layout discipline. Compared with higher-channel-count converters, the two-channel architecture is simpler and well matched to a stereo source. This product record combines the manufacturer device description, exact electrical and package details, sourcing status, technical FAQs, and practical implementation guidance. It also highlights where application-specific data such as the complete pin map and internal-reference behavior must be confirmed in the manufacturer datasheet before layout signoff.

Devis Contact
WM8782SEDS/V - 24-Bit 192kHz Stereo ADC | Cirrus Logic
WM8782SEDS/V

WM8782SEDS/V - 24-Bit 192kHz Stereo ADC | Cirrus Logic

Cirrus Logic WM8782SEDS/V is a 24-bit, 192kHz stereo audio analog-to-digital converter with an I2S digital interface, housed in a 20-pin SSOP package. The converter supports two analog input channels, master or slave clocking, and an integrated front-end op-amp for line-level signals. An audio ADC is a semiconductor that converts left and right analog audio voltages into digital words for processing, storage, transmission, or playback. The WM8782 belongs to the broader hierarchy of audio converter, data-converter, analog-to-digital converter, and integrated-circuit families. Its stereo architecture captures two channels simultaneously, while its digital output can feed an audio processor, codec, digital mixer, or digital recording system. The WM8782SEDS/V provides 24-bit resolution and sampling rates from 8kHz to 192kHz. Its sigma-delta ADC architecture supports 32x, 64x, or 128x oversampling, while the output word length can be configured from 16 to 24 bits. FORMAT and IWL control inputs permit operation in standard audio-interface configurations, reducing the need for external logic or a separate digital interface controller. Master and slave clocking schemes are controlled through the M/S input, allowing the converter to work with external master clocks or generate its own audio clock in master mode. The integrated front-end op-amp accepts analog input signals greater than the nominal line-level range, while the two-channel input structure supports stereo source capture. These features make the converter suitable for compact digital audio equipment that requires high-rate conversion without a large external analog front end. Typical uses include consumer recording equipment, digital mixers, multichannel sound-card inputs, media-capture systems, and industrial audio interfaces. The device is also appropriate for projects requiring 192kHz acquisition when the host processor can accommodate the corresponding data rate. Its 20-pin SSOP package supports conventional surface-mount assembly, although careful grounding and decoupling remain essential for audio performance. During layout, place input, output, and decoupling components according to the pin-description table and recommended application circuit in the manufacturer datasheet. The analog input and digital interface paths require a quiet ground strategy, short return paths, and controlled clock routing. Because this converter performs high-resolution signal acquisition, bypassing, grounding, and supply sequencing can influence channel matching and overall signal integrity. This product page combines the device identity, verified technical attributes, lifecycle information, source links, replacement analysis, and practical design guidance. It helps engineers distinguish exact package compatibility from merely similar ADC functions and plan PCB, interface, and sourcing decisions before committing the WM8782SEDS/V to a design.

Devis Contact
WM8783GED/RV - 24-Bit Stereo Audio ADC | Cirrus Logic
WM8783GED/RV

WM8783GED/RV - 24-Bit Stereo Audio ADC | Cirrus Logic

The Cirrus Logic WM8783GED/RV is a 24-bit stereo audio analog-to-digital converter designed for digital audio systems. It accepts single-ended analog line inputs, supports sampling rates up to 96 kSPS, and provides an I2S digital audio interface. The component is housed in an 8-pin SOIC package. The WM8783 belongs to the audio ADC category within the broader analog-to-digital converter and mixed-signal IC hierarchy. Audio ADCs convert continuous analog audio signals into digital sample streams for processing, storage, transmission, or playback. The WM8783 is intended for applications such as set-top boxes, DVD systems, and other consumer audio equipment where stereo line-level signals must be digitized with a compact interface. Key features include 24-bit resolution, a maximum sampling rate of 96 kSPS, stereo analog inputs, and an I2S output interface. The device is described as a compact, low-cost ADC for set-top box and DVD applications. Its stereo input architecture is suitable for two-channel audio acquisition, while the digital output allows direct connection to a digital audio processor, codec, or system interface. The WM8783GED/RV is manufactured on a CMOS process and is therefore susceptible to electrostatic discharge damage during handling. ESD-safe handling procedures are important during soldering, inspection, and production assembly. The device's function is straightforward for an audio converter: analog signals enter through the stereo input pins, are sampled and quantized by the ADC, and are transferred over the I2S interface as digital audio data. Typical applications include set-top box audio paths, DVD player analog input stages, consumer audio receivers, and embedded multimedia systems. The 96 kSPS maximum rate supports high-resolution audio conversion, while 24-bit data provides substantial dynamic range for line-level sources. System designers should verify the analog input range, reference implementation, clocking requirements, and digital interface configuration against the manufacturer datasheet before finalizing the circuit. This page combines the WM8783GED/RV product identity, core ADC specifications, application guidance, and design considerations into a concise engineering reference. It is intended to help engineers identify suitable use cases, plan board-level integration, and evaluate equivalent parts without overlooking pin compatibility, interface requirements, or supply-availability constraints.

Devis Contact
WM8783GED/V Stereo 98kHz Audio ADC | Cirrus Logic
WM8783GED/V

WM8783GED/V Stereo 98kHz Audio ADC | Cirrus Logic

Cirrus Logic WM8783GED/V is a stereo low-power audio analog-to-digital converter with a 98 kHz sampling rate and 24-bit I2S output, supplied in an 8-pin SOIC package. The verified manufacturer-family source describes it as a stereo low-power ADC, while the retrieved distributor data identifies the same device family for 96 kHz operation. It is designed for compact audio capture, playback, and mixed-signal systems requiring dual-channel conversion. An ADC is an analog-to-digital converter, a mixed-signal integrated circuit that converts continuously varying analog audio voltages into digital samples. In the broader component hierarchy, an audio ADC belongs to data converters, mixed-signal semiconductors, and signal-chain ICs. The WM8783GED/V therefore sits between an analog microphone or line input and a digital audio interface such as I2S. The principal verified features are stereo operation, a 24-bit conversion format, I2S digital output, and a family sampling-rate capability reported as 98 kHz in distributor material and 96 kHz in the Wolfson-family result. The device is identified as low power, making it relevant to embedded audio systems where power consumption, channel count, and board area constrain the architecture. The manufacturer-family datasheet source also indicates that the device is manufactured on a CMOS process and is ESD-sensitive. WM8783GED/V is suitable for digital recording front ends, USB audio adapters, industrial audio capture, portable audio equipment, and consumer audio systems. In each case, the stereo ADC can convert left and right analog inputs into digital samples for downstream processing or transmission. The I2S interface helps simplify connection to digital audio controllers, DSPs, and microcontrollers, although the host device must support the required clocking and framing format. When selecting this part, verify the exact electrical characteristics, analog input range, clock requirements, master or slave operating mode, and package pin assignment in the current manufacturer documentation. Do not infer those values from generic ADC descriptions. For replacement work, confirm that the candidate uses the same SOIC footprint and pin-to-pin signal arrangement rather than relying only on a similar sample rate or converter function. This page combines the verified source snippets for the WM8783GED/V family with engineering-oriented application and selection context. Because the retrieved data does not provide a complete current manufacturer product page, several detailed parameters remain explicitly marked for verification rather than being guessed.

Devis Contact
WM8786GEDS/V - 24-Bit 192kHz Stereo Audio ADC | Cirrus Logic
WM8786GEDS/V

WM8786GEDS/V - 24-Bit 192kHz Stereo Audio ADC | Cirrus Logic

The Cirrus Logic WM8786GEDS/V is a 24-bit, 192kHz stereo audio analog-to-digital converter with differential inputs, digital audio processing, and I2S output in a 20-pin SSOP package. The device is identified by the WM8786GEDS/V manufacturer part number and is intended for high-performance recordable media applications. A stereo audio ADC is a data-conversion IC that accepts two analog audio channels and converts them into digital samples for processing, storage, transmission, or playback. The WM8786GEDS/V belongs to the ADC/DAC and audio data-converter hierarchy, where differential inputs, integrated audio DSP, and a high-resolution serial interface help simplify audio capture designs. Verified distributor and manufacturer information identifies the WM8786GEDS/V as an audio ADC with 24-bit resolution, operation up to 192kHz, DSP capability, differential inputs, and a 20-SSOP package. The stereo architecture supports simultaneous left and right audio conversion, while the digital audio interface is identified as I2S. These features make the device suitable for consumer audio equipment, recording systems, digital audio equipment, and embedded audio products. The WM8786GEDS/V is differentiated from general-purpose data converters by its dedicated audio-oriented feature set. Its 24-bit resolution supports high-fidelity capture, the 192kHz maximum sample rate supports high-resolution audio, and differential analog inputs help reduce common-mode noise in balanced audio signal paths. The integrated DSP function can assist with signal conditioning and audio processing, although the exact operating modes and filter settings must be confirmed in the manufacturer datasheet. Typical applications include stereo recording equipment, consumer audio systems, digital mixing and amplification products, USB or portable audio interfaces, and other systems requiring two-channel audio capture. In these applications, the ADC can be placed between balanced or appropriately conditioned analog audio inputs and an I2S-capable digital audio processor. The 20-SSOP package supports compact PCB layouts, but its fine pitch requires careful soldering and layout practices. Designers should confirm the analog input range, differential input configuration, reference-voltage requirements, digital supply levels, clocking requirements, and supported I2S formats before releasing a production design. Decoupling capacitors should be placed close to the supply pins, and analog and digital routing should be separated to reduce switching noise coupling into the audio inputs. The manufacturer datasheet and application information should be used for the final input, clock, filtering, and layout implementation. This product page consolidates verified distributor identity and product descriptions with package, application, selection, and engineering guidance. It distinguishes the WM8786GEDS/V from the related WM8786GEDS/RV ordering variant and provides a practical framework for confirming pin and PCB compatibility before substitution.

Devis Contact
WM8788GEDT - 24-Bit 192kHz Stereo Audio ADC | Cirrus Logic
WM8788GEDT

WM8788GEDT - 24-Bit 192kHz Stereo Audio ADC | Cirrus Logic

The Cirrus Logic WM8788GEDT is a 24-bit stereo audio analog-to-digital converter capable of sampling at up to 192 kHz, supplied in a 16-pin TSSOP package. It supports I2S digital audio output, analog and digital supply rails, and analog line-level inputs configured through external resistors. The verified operating-temperature range is -40°C to +85°C, and the component is available in reel packaging for surface-mount production. An audio ADC is an interface IC that converts left- and right-channel analog sound signals into digital samples for processing, storage, or transmission. The WM8788GEDT belongs to the broader ADC/DAC hierarchy, where an ADC converts analog audio into digital data and a DAC performs the inverse operation. Its stereo architecture supports simultaneous processing of two analog channels, while the digital interface carries 24-bit audio data. The headline specifications are a 24-bit conversion resolution, a maximum sample rate of 192 kHz, and a 16-pin TSSOP package. The device accepts a pair of analog inputs, and external resistors configure the inputs for line-level operation at 1 Vrms or for higher signal levels. This combination makes the converter appropriate for consumer audio equipment, digital mixing systems, recording interfaces, and other stereo audio products that require high-resolution capture. The verified interface data identifies I2S as the digital audio interface and indicates separate analog and digital supply sources. These supply domains require correct decoupling and grounding to prevent digital switching activity from contaminating the analog conversion path. The converter's operating range of -40°C to +85°C supports use across industrial and commercial temperature environments, subject to the complete manufacturer datasheet requirements. Typical applications include high-resolution stereo recording, line-level audio capture, digital audio mixers, and audio interface products. Its 192 kHz maximum rate supports high-resolution conversion, while the 24-bit word length provides ample numerical resolution for professional and premium consumer audio. Designers should still verify clocking, supported audio-data formats, analog input scaling, and power sequencing against the manufacturer datasheet before releasing a PCB. A key design consideration is analog-versus-digital layout isolation. Place the analog input network close to the converter, maintain a continuous ground reference, and isolate high-current digital return paths from the ADC inputs. Also confirm the exact 16-pin TSSOP pinout and exposed support requirements; the supplied search data does not include a verified pin-by-pin diagram. This page combines verified manufacturer and distributor information with explicit data gaps, application guidance, sourcing context, and design considerations. It distinguishes documented facts from parameters that still require confirmation in the full WM8788GEDT datasheet, helping engineers make a more reliable preliminary design decision without presenting unsupported specifications as established data.

Devis Contact
WM8788GEDT/R - 24-Bit Stereo ADC | Cirrus Logic
WM8788GEDT/R

WM8788GEDT/R - 24-Bit Stereo ADC | Cirrus Logic

Cirrus Logic WM8788GEDT/R is a high-performance 24-bit stereo analog-to-digital converter designed for consumer audio equipment. It converts two analog input channels into 24-bit digital audio data at up to 192 kHz through an I2S digital interface, and is packaged in a 16-pin TSSOP surface-mount package. The WM8788GEDT/R designation identifies the reel-packaged version of this Wolfson Microelectronics audio converter. An ADC is a data-acquisition and signal-conversion IC that transforms continuously varying analog voltages into digital values for processing or transmission. In the audio hierarchy, the WM8788GEDT/R belongs to the high-performance stereo ADC class, combines an analog signal chain with digital data conversion, and ultimately operates as a mixed-signal semiconductor. Its stereo architecture makes it suitable for systems requiring simultaneous conversion of left and right audio channels. The primary features are 24-bit resolution, a maximum conversion rate of 192 kHz, two analog inputs, and an I2S digital audio output. External resistors configure the analog inputs for a 1 Vrms line-level signal or for higher input levels. This allows the same converter to be used in different source-impedance and signal-amplitude conditions when the board-level resistor network is selected appropriately. The device supports separate analog and digital supply domains, providing flexible rail partitioning when analog and digital subsystems require different voltage levels. Its 16-TSSOP package supports compact, surface-mount PCB construction, while the listed operating-temperature range of -40°C to +85°C covers industrial-temperature commercial equipment. The manufacturer lists the part as active. Typical applications include LCD television audio paths, DVD players, Blu-ray Disc equipment, set-top boxes, and other consumer systems that convert stereo analog audio into a digital format. Its 192 kHz capability also supports high-resolution audio conversion where the source, clocking, and downstream signal chain support the corresponding sample rate. Designers should treat the analog input network, supply sequencing, clocking, and digital-interface implementation as one signal-chain design. Place input and supply decoupling close to the device, keep analog and digital return currents separated, and verify every digital-audio timing condition against the manufacturer datasheet before releasing the PCB. This page combines the product specifications, sourcing guidance, practical application guidance, package information, and a verified comparison of related audio-conversion options. It is intended to help engineers select the correct converter and plan a reliable implementation without overlooking package, interface, or analog-front-end constraints.

Devis Contact
WM8804GEDS/V - 1:1 S/PDIF Transceiver | Cirrus Logic
WM8804GEDS/V

WM8804GEDS/V - 1:1 S/PDIF Transceiver | Cirrus Logic

Cirrus Logic WM8804GEDS/V is a high-performance consumer-mode S/PDIF audio transceiver with one received channel and one transmitted channel, supplied in a 20-lead Pb-free SSOP package. It supports a 2.7 V to 3.6 V supply range, an industrial temperature grade of -40°C to +85°C, a 1:1 digital audio interface, and an internal PLL for generating common audio clocks. An S/PDIF transceiver is an interface IC that converts digital audio signals between consumer Sony/Philips digital audio format and a parallel digital audio interface. Within the broader semiconductor hierarchy, the WM8804 is a digital audio interface IC, an interface IC, and a signal-processing semiconductor used to connect audio converters, receivers, and digital playback systems. The WM8804 can use either a crystal-derived clock or an externally supplied high-quality master clock. Its clock-recovery architecture provides low-jitter recovery of the master clock carried by an S/PDIF stream, while the internal PLL can generate commonly used audio clocks. A dedicated CLKOUT pin provides access to a generated or recovered clock for associated audio-processing circuitry. The 1:1 digital interface supports integration between S/PDIF-capable audio hardware and a digital audio bus. A clock derived from the incoming S/PDIF signal can support system synchronization, while the transmit path provides S/PDIF output from a compatible digital audio source. The combination of integrated PLL functions and clock output reduces the amount of external clock-generation circuitry required in consumer audio products. Typical applications include digital home-theater equipment, CD and DVD player subsystems, digital audio receiver boards, active speaker interfaces, consumer home-audio products, and industrial digital audio equipment. The 20-lead SSOP package supports compact circuit layouts, although its larger lead pitch and body dimensions should be considered against smaller surface-mount alternatives when space is constrained. Designers should provide a clean and stable 2.7 V to 3.6 V supply, route the S/PDIF data and clock signals away from noisy switching nodes, and ensure the selected master-clock source has adequate low-jitter performance. Decoupling and exposed-ground layout should follow the manufacturer datasheet recommendations, particularly when the transceiver is adjacent to a switching power supply or a high-speed digital processor. This product summary consolidates the verified distributor specifications, manufacturer-oriented datasheet references, package information, and design considerations into one engineering-focused guide. It also distinguishes documented electrical facts from unavailable pricing, lifecycle, pin-level, and equivalent-part information so engineers can assess fit without relying on unverified substitutions.

Devis Contact
WM8805GEDS/RV - 8:1 S/PDIF Audio Transceiver | Cirrus Logic
WM8805GEDS/RV

WM8805GEDS/RV - 8:1 S/PDIF Audio Transceiver | Cirrus Logic

Cirrus Logic WM8805GEDS/RV is a high-performance consumer-mode S/PDIF digital audio interface transceiver with eight receive channels and one transmit channel, packaged in a 28-lead SSOP. It supports sample rates from 32 kHz to 192 kHz and provides a jitter-attenuating phase-locked loop for clock recovery and audio clock generation. A digital audio transceiver is an interface IC that converts between digital audio data streams, clock signals, and electrical serial links. The WM8805 belongs to the S/PDIF transceiver category, where S/PDIF is a consumer-mode digital audio interface used to carry PCM audio between source components, receivers, amplifiers, and recording equipment. Its receive and transmit sections place multiple digital audio channels behind one device. Key features include eight received channels, one transmitted channel, support for 32 kHz through 192 kHz operation, a PLL-based clock architecture, and 50 ps RMS intrinsic period jitter according to the ChipApex technical listing. The device also complies with IEC 60958-3, covering the digital-audio interface requirements relevant to professional and consumer audio equipment. The WM8805 accepts a crystal-derived or externally supplied high-quality main clock, allowing the transceiver to recover S/PDIF clocks with low jitter and generate commonly used audio clocks. This architecture allows a system designer to centralize clock recovery and distribution while reducing the number of separate digital-interface devices. Typical applications include professional audio equipment, multi-channel receivers, digital mixing consoles, set-top boxes, DVD and Blu-ray disc systems, home theater components, and other consumer products with multiple S/PDIF inputs. The eight-channel receiver is especially useful when a product must accept several digital audio sources and route or convert them through one interface IC. When laying out a design, treat the main clock, S/PDIF data, and ground return paths as high-speed digital connections. Follow the pin-description and application-schematic tables in the manufacturer datasheet for decoupling, clock connection, and input termination. Verify the required channel count, supported sample rate, and master-clock source before assigning pins, because the 28-lead SSOP footprint cannot be reused for a device with a different transceiver architecture. This page consolidates channel counts, supported sampling rates, package information, lifecycle status, equivalent-part guidance, and application-oriented design notes into one engineering reference for the WM8805GEDS/RV.

Devis Contact
WM8850GEFL/RV 24-Bit 6-Channel HDA Codec | Cirrus Logic
WM8850GEFL/RV

WM8850GEFL/RV 24-Bit 6-Channel HDA Codec | Cirrus Logic

The Cirrus Logic WM8850GEFL/RV is a 24-bit multichannel High Definition Audio codec with HDA and S/PDIF interfaces, four ADC channels, six DAC channels, and support for three stereo DAC outputs in a 48-pin WFQFN package measuring 7 x 7 mm. The device is designed for embedded systems requiring multichannel digital audio and compatibility with the Intel High Definition Audio specification revision 1.0. An audio codec is an interface IC that converts between digital audio data and analog microphone or line-level signals. The WM8850 belongs to the codec hierarchy within audio interface ICs and broader signal-chain semiconductors. Its integrated converters allow an embedded host to transmit digital audio over HDA or S/PDIF while handling analog audio input and output through dedicated converter channels. Key features include 24-bit audio resolution, six DAC channels, four ADC channels, three stereo DACs for 5.1-channel audio, and a 48-QFN surface-mount package. The HDA 1.0-compatible interface supports integration with industry-standard audio controllers, while S/PDIF provides a digital audio connection for compatible equipment. Its 0.50 mm package pitch supports compact consumer and embedded designs. Technically, the codec combines multichannel recording and playback paths in one device. Four ADC channels provide analog-to-digital conversion for microphone or line-input sources, while the six DAC outputs support up to six playback channels. The three stereo DAC architecture enables six-channel 5.1 playback without requiring three separate stereo converter packages, reducing board area and simplifying digital-audio routing. Typical applications include consumer AV receivers, home-theater equipment, set-top boxes, networked media systems, automotive infotainment units, industrial panels, and other embedded multimedia products. The HDA and S/PDIF interfaces make it particularly suitable for systems that already use a digital audio host processor rather than a purely analog audio path. PCB design should preserve the exposed-pad thermal and electrical requirements of the WFQFN package and place analog input, output, and supply connections according to the manufacturer datasheet. Keep sensitive audio traces away from digital clocks and switching nodes, and verify the recommended decoupling network before signal-path layout is finalized. This page consolidates the device identification, package information, converter configuration, interface features, sourcing paths, and practical replacement guidance. It also distinguishes documented drop-in candidates from unrelated codec families so engineers can assess PCB reuse without confusing functional similarity with pin compatibility.

Devis Contact
WM8860GEFL/RV - 32-Bit HD Audio Codec | Cirrus Logic
WM8860GEFL/RV

WM8860GEFL/RV - 32-Bit HD Audio Codec | Cirrus Logic

Cirrus Logic WM8860GEFL/RV is a 32-bit, multichannel high-definition audio codec with 2 ADC channels, 2 DAC channels, and 4-channel transmit and receive capability in a 48-QFN 7 x 7 mm package. It is designed for audio systems requiring integrated high-definition playback, capture, digital audio routing, and S/PDIF connectivity. A high-definition audio codec is an interface IC that converts between digital audio data and analog signals. It sits between a digital audio engine, such as an application processor, and external analog audio circuitry. The WM8860 belongs to the broader hierarchy of integrated circuits, interface ICs, audio codecs, and semiconductor devices, combining conversion, digital mixing, and digital-audio interfaces in one component. The device provides two ADC and two DAC channels, a 32-bit audio architecture, and 4-channel high-definition audio transmit and receive functionality. It also includes an S/PDIF transmitter identified by the manufacturer datasheet as compatible with IEC-60958-3. Two dedicated GPIO pins provide control for external amplifiers or additional system components, reducing the need for separate general-purpose control logic in straightforward audio designs. The WM8860 combines multiple signal-processing functions within the codec. Its ADC channels support digital capture of analog audio, while its DAC channels support high-definition analog playback. The S/PDIF interface allows digital audio to leave the codec for external digital audio equipment. Four-channel transmit and receive operation supports contemporary surround-sound and multi-zone architectures without requiring several separate codec packages. Typical uses include home-theater equipment, multichannel audio receivers, powered speakers, automotive infotainment systems, networked-audio equipment, and portable consumer products. In each case, the codec can centralize analog-to-digital capture, digital-to-analog playback, digital routing, amplifier control, and S/PDIF output while preserving a compact 48-QFN footprint. PCB design should preserve the analog and digital separation required by the codec layout and keep sensitive audio routes away from switching nodes and high-current return paths. The exposed-pad thermal structure requires careful ground-plane and via layout for predictable thermal performance. Input and output filtering must be designed for the intended sample rates, source impedance, and external amplifier characteristics rather than copied from a generic reference circuit. This product page consolidates the confirmed 32-bit codec configuration, 2-ADC/2-DAC channel count, 4-channel transmit and receive capability, 48-QFN package information, S/PDIF support, GPIO resources, verified source links, and engineering guidance into one practical selection and integration resource.

Devis Contact
WM8860GEFL/V - 32-Bit 4-Channel HDA Audio Codec | Cirrus Logic
WM8860GEFL/V

WM8860GEFL/V - 32-Bit 4-Channel HDA Audio Codec | Cirrus Logic

The Cirrus Logic WM8860GEFL/V is a 32-bit multichannel High Definition Audio codec with two stereo DACs, four output channels, and Intel High Definition Audio specification revision 1.0 compatibility in a 48-pin QFN package measuring 7 mm by 7 mm. It integrates digital audio interfaces, analog audio conversion, and codec control into a single device for multichannel consumer audio equipment. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and, in some designs, converts analog input into a digital stream. A codec sits within the broader audio interface hierarchy and connects a digital audio bus, analog output circuitry, clocks, control logic, and sometimes microphone inputs. The WM8860GEFL/V is therefore positioned between an HDA controller and the analog speaker or headphone output stage of a finished audio system. The WM8860 family provides two high-performance stereo DACs, enabling four channels of high-definition audio from one package. Its 32-bit audio interface and HDA revision 1.0 compatibility allow it to operate with industry-standard HDA controllers. The 48-QFN package supports compact integration in consumer electronics while providing the mixed-signal connections required for digital audio routing, analog outputs, and codec configuration. The device uses a registered I2C-style control interface and supports vendor-specific control verbs in addition to the standardized HDA verbs implemented by the WM8860. Its system-level role depends on correct clock generation, I2C address configuration, firmware initialization, output-path routing, and analog implementation. These controls allow a host controller to configure playback paths, mixer behavior, and digital volume while the integrated DACs generate the final analog audio channels. Typical applications include desktop computers, home-theater equipment, multichannel active speakers, game consoles, audio docking stations, and consumer media systems with Intel HDA-compatible controllers. It is particularly appropriate where four analog output channels are required without using multiple separate codec packages. System-level audio performance still depends on the external clock source, power supplies, analog output network, grounding, and speaker or headphone amplifiers connected downstream. Design the 7 mm by 7 mm footprint with thermal-via access beneath the exposed pad and keep sensitive analog routing away from digital clocks and switching supply nodes. Validate every external component value against the manufacturer reference schematic and recommended layout. The MPN suffix identifies a specific orderable configuration, so board releases should confirm the full WM8860GEFL/V designation rather than relying only on the WM8860 family name. This page consolidates the verified package, interface, channel-count, and HDA-compatibility details, adds application-specific engineering guidance, and separates confirmed characteristics from parameters that must be confirmed in the manufacturer datasheet before schematic release.

Devis Contact
WM8903CLGEFK - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8903CLGEFK

WM8903CLGEFK - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8903CLGEFK is a 24-bit stereo audio codec with 2 ADC channels, 2 DAC channels, and a 40-pin QFN package measuring 5 x 5 mm. Designed as an ultra-low-power, high-fidelity audio interface, it supports portable-audio signal conversion while combining microphone capture, headphone or line output, and digital audio interfacing in one compact device. An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog microphone, line, or headphone signals. Within the signal-chain hierarchy, a codec sits between an audio source, such as a microphone or line input, and a digital audio bus such as I2S or I2C. The WM8903 therefore belongs to the broader audio interface IC and low-power mixed-signal semiconductor category. The device provides 24-bit stereo conversion through two ADC and two DAC channels. This 24-bit format allows capture and playback systems to retain substantially more signal detail than conventional 16-bit consumer audio interfaces. Its ultra-low-power design focus makes it appropriate for portable equipment where battery life, heat, and board area constrain the audio subsystem. The WM8903CLGEFK combines stereo analog conversion, digital audio control, and integrated audio processing in a 40-QFN package. Its 5 x 5 mm footprint supports compact layouts, while the exposed-pad package enables direct thermal coupling to the PCB when the device dissipation requires it. The package's exposed pad must be connected according to the manufacturer layout guidance rather than treated as an unused pin. Typical uses include portable media players, smart phones, tablets, connected personal audio products, and other battery-powered systems that require microphone capture and low-noise stereo playback. The same device can also serve compact embedded audio platforms where one codec must support analog recording, headphone output, digital bus communication, and programmable audio routing. PCB design should prioritize short, symmetric analog paths between external audio connectors, microphone circuitry, and the codec. Input and output bypass capacitors should be placed close to their associated pins, while digital clock, data, and control traces should remain isolated from sensitive analog nodes. Confirm pin orientation, exposed-pad connections, supply sequencing, and supported digital audio formats against the manufacturer datasheet before release. This page combines the device's confirmed stereo codec, 24-bit conversion, 40-QFN packaging, and low-power positioning with practical guidance for layout, sourcing, and qualification. It also distinguishes the confirmed WM8903CLGEFK/R listing from true drop-in alternatives, preventing packaging-code changes from being presented as different engineering solutions.

Devis Contact
WM8904CGEFL/V - Stereo Audio Codec 24-Bit | Cirrus Logic
WM8904CGEFL/V

WM8904CGEFL/V - Stereo Audio Codec 24-Bit | Cirrus Logic

The Cirrus Logic WM8904CGEFL/V is an ultra-low-power, high-performance stereo audio codec with a 24-bit signal path, integrated stereo ADC and DAC channels, headphone and line outputs, and a 32-pin QFN package measuring 4 mm by 4 mm. It is designed for portable audio equipment where playback efficiency, compact construction, and elimination of output coupling capacitors are important. The codec also uses a dual-mode charge-pump architecture within its ground-referenced Class-W headphone amplifiers. An audio codec is an integrated semiconductor that converts between digital audio data and analog microphone, line, and headphone signals. In the signal chain, an ADC represents incoming analog audio as digital samples, while a DAC converts digital playback data back into an analog output. The WM8904 combines these functions with integrated headphone and line-output circuitry, reducing the number of external active components required in portable audio systems. The WM8904CGEFL/V supports stereo playback through ground-referenced headphone and line outputs. Because the outputs are ground referenced, their signal is centered around the analog ground reference rather than a divided supply midpoint. The manufacturer states that the outputs eliminate AC coupling capacitors and include common-mode feedback paths that help reject ground noise. These features are particularly useful in portable products where component count, board area, power consumption, and low-frequency noise directly affect user experience. Its Class-W headphone amplifiers incorporate a dual-mode charge-pump architecture to optimize efficiency and power consumption during playback. This architecture supports the device's ultra-low-power design goal while providing integrated headphone drive. The 24-bit codec resolution and two-channel conversion capability make the device suitable for high-quality voice, music, and multimedia playback. Exact conversion rates, signal-to-noise ratios, headphone-output limits, clock frequencies, and supply-voltage limits should be confirmed in the manufacturer datasheet for the selected production configuration. Typical applications include smartphones, portable media players, personal audio devices, portable game consoles, and compact connected audio products. In a smartphone or portable player, the codec can accept digital audio from an application processor, convert it through the DAC, and drive stereo headphones or line outputs while minimizing external passive-component count. The same architecture is suitable for industrial test equipment or voice-enabled systems where low power and a small footprint are important. Layout should prioritize short, quiet analog paths between the codec, microphone or line inputs, and headphone outputs. Place decoupling capacitors close to their associated supply pins and route digital clock and data signals away from sensitive analog inputs. Headphone and line output routing should also account for output impedance, cable loading, and the external components recommended by the manufacturer datasheet. The exposed-pad thermal and layout requirements in the package drawing should be followed to maintain reliable operation across the intended temperature range. This product page combines package, codec, interface, and amplifier details with drop-in replacement information, application guidance, comparison parameters, and PCB-focused design notes. It is structured to help engineers identify whether the WM8904CGEFL/V matches the required channel count, package footprint, power level, and portable-audio architecture before beginning board layout or production sourcing.

Devis Contact
WM8918CGEFL/RV - 24-Bit Stereo DAC | Cirrus Logic
WM8918CGEFL/RV

WM8918CGEFL/RV - 24-Bit Stereo DAC | Cirrus Logic

Cirrus Logic WM8918CGEFL/RV is an ultra-low-power stereo digital-to-analog converter with a 24-bit resolution, support for audio data rates up to 96 kHz, and an I2S digital audio interface. It integrates dual ground-referenced headphone amplifiers and is packaged in a 32-QFN surface-mount package measuring 4 mm by 4 mm. Its analog and digital operating supply range is 0.95 V to 1.98 V. An audio DAC is a semiconductor that converts digital PCM audio samples into proportional analog voltages or currents. In the broader hierarchy, the WM8918 belongs to the audio converter class, combining an ADC/DAC-family data converter with integrated headphone-driver circuitry. This combination reduces the number of external signal-chain components and removes the need for output coupling capacitors when the ground-referenced headphone outputs are used as intended. The WM8918 uses Wolfson Class-W amplifier techniques and an innovative dual-mode charge-pump architecture to optimize efficiency and power consumption during playback. Ground-referenced headphone and line outputs eliminate AC-coupling capacitors, while common-mode feedback paths help reject ground noise. The device accepts I2S-format digital audio and supports resolution and sample-rate combinations appropriate for consumer audio playback. The device operates from 0.95 V to 1.98 V and is specified over a -40 °C to +85 °C operating-temperature range. Its 24-bit conversion resolution supports high-fidelity playback, while the 96 kHz capability accommodates professionally rendered and lossless audio material. The 32-QFN package supports compact surface-mount layouts but requires careful exposed-pad thermal management and controlled assembly soldering. Typical applications include USB and Bluetooth headphone adapters, portable-listening products, mobile-device audio accessories, compact stereo playback systems, and embedded audio equipment. The integrated headphone stage is particularly useful when the design goal is a low-component-count analog output path while preserving a direct digital-audio connection from a host processor or audio codec. Design the supply rails so the analog and digital domains remain within their specified operating range under transient loading. Place the manufacturer-recommended decoupling capacitors close to their associated supply pins, route digital audio signals away from the sensitive analog outputs, and provide adequate exposed-pad copper for thermal dissipation. Confirm the complete pin assignments and application circuit against the manufacturer datasheet before PCB release. This product page consolidates the key electrical, packaging, lifecycle, application, and replacement information for engineers evaluating the WM8918CGEFL/RV. It also distinguishes verified drop-in replacements from merely similar audio converters, helping designers avoid board-level incompatibilities caused by different packages, interfaces, or pin assignments.

Devis Contact
WM8940CGEFL/V Mono Codec with Speaker Driver | Cirrus Logic
WM8940CGEFL/V

WM8940CGEFL/V Mono Codec with Speaker Driver | Cirrus Logic

The Cirrus Logic WM8940CGEFL/V is a low-power mono audio codec with integrated microphone, headphone, speaker, and mono line-output support, operating from a 2.5 V to 3.6 V analog supply and a 1.71 V to 3.6 V digital supply. The device accepts 24-bit serial audio data, supports sample rates from 8 kS/s to 48 kS/s, and is packaged in a 24-QFN surface-mount package. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and converts analog microphone or line inputs back into digital data. Its hierarchy extends from codec and audio interface to analog and mixed-signal IC, then to interface IC and semiconductor. The WM8940 combines these conversion functions with integrated output drivers, reducing the number of external microphone, headphone, and speaker amplifier components required in portable audio equipment. The WM8940 supports differential or single-ended microphone input and includes speaker, headphone, and mono line-output drivers. Its advanced delta-sigma converters, digital decimation filters, and digital interpolation filters support audio processing from 8 kS/s through 48 kS/s. The manufacturer also identifies a selectable high-pass filter and four programmable notch filters, allowing the device to address microphone low-frequency rejection, wind noise, and other in-band acoustic problems. The 24-bit digital audio interface connects the codec to a host processor, while separate analog and digital supply domains support mixed-signal systems operating at different voltage levels. The analog supply range of 2.5 V to 3.6 V and digital supply range of 1.71 V to 3.6 V provide flexibility for portable consumer equipment. Integrated drivers reduce external amplification requirements, but output loading, thermal dissipation, and DC bias remain important layout considerations. Typical applications include digital still cameras, camcorders, portable media players, voice recorders, personal audio devices, and other battery-powered products requiring one-channel capture and playback. Its low-power mono architecture is particularly appropriate where a stereo codec would add cost, board area, and energy use without improving the intended recording or playback experience. The integrated headphone and speaker paths simplify portable-system design while retaining flexible input selection and digital audio processing. PCB design should keep analog microphone and output routes away from digital clock and serial-data traces, provide a continuous ground reference beneath the exposed pad, and decouple the analog and digital supply pins locally. Component values, filter settings, clock requirements, and output configuration must be selected using the manufacturer’s recommended application circuit and pin descriptions. The exposed thermal pad should be connected to the ground plane according to the package land pattern. This page combines the manufacturer’s device capabilities, lifecycle status, package information, and verified cross-reference results with practical application guidance. It also distinguishes the exact WM8940CGEFL/V order code from related packaging variants and separates confirmed drop-in replacements from functional alternatives that still require package and pin-level review.

Devis Contact
WM8941GEFL/RV - 24-Bit Mono Audio Codec | Cirrus Logic
WM8941GEFL/RV

WM8941GEFL/RV - 24-Bit Mono Audio Codec | Cirrus Logic

Cirrus Logic WM8941GEFL/RV is a 24-bit mono audio codec with audio and video buffer-interface functions, packaged in a 28-QFN surface-mount package measuring 4 mm by 4 mm. The component is identified by distributor catalogs as an interface IC in the CODEC category and is associated with the Cirrus Logic WM8941 product family. Its compact package supports space-constrained audio equipment in which analog audio processing, digital audio conversion, and compact routing must coexist within a limited board area. An audio codec is an interface integrated circuit that converts digital audio data to and from analog signals while supporting the clocks, control logic, and signal paths required by audio equipment. In the broader electronics hierarchy, an audio codec belongs to interface ICs, then to integrated circuits and semiconductors. A mono codec is particularly useful when the system processes one primary analog channel while still requiring digital audio conversion, speaker or headphone support, or an embedded video-related audio path. The WM8941GEFL/RV is identified as a 24-bit device. Resolution alone does not determine the complete signal-chain performance: clock frequency, sample rate, analog front-end design, input and output impedance, dynamic range, distortion, and the selected operating mode also determine the achievable audio quality. Designers should therefore use the manufacturer datasheet and its recommended application circuit to select the appropriate filter, clock, decoupling, and output-stage components for the target audio bandwidth. The 28-QFN package creates a compact implementation but places a high share of connections beneath the device body. This supports dense PCB layouts while making careful escape routing important. Input, output, supply, ground, clock, control, and exposed-pad connections must follow the manufacturer’s land pattern and layout guidance. Thermal performance also depends on the exposed pad, copper area, internal planes, and the thermal burden generated by the selected operating mode. Typical design contexts include portable or embedded audio systems, multimedia devices, communication terminals, recording equipment, and other products requiring a compact mono audio conversion interface. In each case, the codec may sit between an audio source and a digital audio host, or between a digital audio engine and an analog transducer stage. Clock topology, grounding, signal routing, and startup behavior must be evaluated as a complete subsystem rather than as isolated component concerns. The primary engineering consideration is integration without compromising signal integrity. Keep analog and digital return currents separated where practical, place required bypass capacitors close to their supply pins, route clocks away from sensitive audio inputs, and use the exposed-pad copper area for both electrical return and thermal spreading. The manufacturer’s reference configuration should also be followed for filtering, resistor values, and gain-dependent components. This page consolidates the verified catalog identity, package information, sourcing guidance, compatibility limits, and practical implementation considerations for the WM8941GEFL/RV. It also distinguishes the observed device configuration from unverified electrical details, helping engineers evaluate the part without treating incomplete catalog data as a complete datasheet specification.

Devis Contact
WM8941GEFL/V Mono CODEC with Speaker Driver | Cirrus Logic
WM8941GEFL/V

WM8941GEFL/V Mono CODEC with Speaker Driver | Cirrus Logic

The Cirrus Logic WM8941GEFL/V is a low-power, 24-bit mono audio CODEC with an integrated speaker driver, video buffer, microphone input, headphone output, and mono line output in a 28-QFN (4 mm x 4 mm) package. Designed for portable imaging and multimedia equipment, it combines several analog audio functions with a digital audio interface to reduce the number of external amplifiers and supporting components required in portable products. An audio codec is a mixed-signal interface IC that converts digital audio samples into analog signals and converts analog microphone or line-level audio into a digital format. A mono CODEC performs those functions for one audio channel, while an integrated speaker or headphone driver can directly load an output transducer. The WM8941GEFL/V places this signal chain in one compact surface-mount package suitable for portable digital still cameras, camcorders, and similar equipment. The device supports differential or single-ended microphone inputs, eliminating the need for a separate microphone amplifier in many portable designs. It also integrates drivers for speakers or headphones and provides a mono line output. These resources allow a compact system to implement microphone capture and audio playback while reducing board area and external component count. A separate integrated current-mode video buffer supports video output needs and includes short-circuit protection. The WM8941 family uses sigma-delta conversion for digital audio processing, as described in the manufacturer documentation for the closely related WM8941GEFL/RV version. The WM8941GEFL/V is identified in distribution records as a 24-bit mono CODEC in a 28-QFN (4 mm x 4 mm) package. Its design emphasizes portable-system integration rather than a separate collection of discrete analog audio blocks. Typical applications include portable digital cameras, camcorders, compact recording systems, and portable consumer devices requiring microphone recording and mono audio playback. It is particularly relevant where board area is constrained and the design needs integrated microphone, headphone, speaker, line-output, and video-buffer functions. Portable multimedia equipment benefits from the reduced component count and simplified analog routing created by combining these blocks. When laying out a design, follow the pin-description and application-circuit tables in the manufacturer datasheet for supply decoupling, analog and digital return paths, microphone biasing, output filtering, and exposed-pad connection. Keep analog signal paths short, separate sensitive microphone routing from digital and video paths, and connect the exposed thermal pad according to the package land pattern. The exact pin names and PCB footprint details must be taken from the official WM8941 datasheet rather than inferred from similar codec packages. This page consolidates the exact catalog identity, package information, functional description, sourcing routes, compatible-family context, and application guidance for the WM8941GEFL/V. It also identifies where engineering decisions require the manufacturer pin table, electrical limits, or application circuit, helping engineers move directly from component selection to a defensible portable-audio implementation.

Devis Contact
WM8950CGEFL/RV - 24-Bit Mono Audio ADC | Cirrus Logic
WM8950CGEFL/RV

WM8950CGEFL/RV - 24-Bit Mono Audio ADC | Cirrus Logic

The Cirrus Logic WM8950CGEFL/RV is a single-channel, 24-bit delta-sigma audio ADC operating at up to 48 kSPS, with a DSP interface and digital audio output, packaged in a 24-QFN surface-mount package measuring 4 x 4 mm. Its 1.71 V to 3.6 V analog supply range supports low-voltage portable, embedded, and consumer audio systems. An audio ADC is a data-converter IC that samples an analog microphone or line-level signal and converts it into a digital representation for transmission, storage, or further processing. The WM8950 belongs to the ADC/DAC class of data converters, where the delta-sigma architecture emphasizes high resolution and compact implementation. Its DSP interface supports configurable digital signal processing, while I2S provides a conventional connection to digital audio processors. The device provides 24-bit resolution, a maximum sampling rate of 48 kSPS, one analog input channel, and an I2S digital audio interface. A 1.71 V to 3.6 V supply range permits operation from low-voltage digital systems, while the 24-QFN package limits board area to 4 x 4 mm. The exposed-pad construction provides a direct thermal path from the converter to the PCB when properly soldered and thermally coupled. Its delta-sigma conversion architecture is suited to audio-band signals requiring greater resolution than a compact 8-bit or 16-bit system ADC. The DSP interface can apply digital filtering and signal conditioning before data reaches the host processor, reducing the need for separate software and analog processing in embedded audio designs. The 48 kSPS rate covers standard digital-audio acquisition rates used in voice, communication, and consumer equipment. Typical uses include digital microphones, microphone-array preprocessing, industrial monitoring, smart-home audio nodes, portable accessories, and embedded voice-capture systems. In these applications, the converter can capture one analog channel and present digital audio to an application processor, DSP, or audio subsystem. The compact footprint is especially useful where board space is constrained and the 24-bit word length preserves low-level signal detail. Designers should treat the exposed pad as both a thermal and electrical land, follow the manufacturer's recommended decoupling and layout guidance, and confirm all digital-interface signal levels against the host device. The 0.5 mm terminal pitch requires careful assembly inspection because fine-pitch soldering defects can cause intermittent channel or interface failures. This page consolidates the verified electrical identity, package information, orderable variants, drop-in candidates, and practical design guidance needed to evaluate the WM8950CGEFL/RV for an embedded audio-conversion design.

Devis Contact
WM8952ECS/RV - 24-Bit Mono Audio ADC | Cirrus Logic
WM8952ECS/RV

WM8952ECS/RV - 24-Bit Mono Audio ADC | Cirrus Logic

The Cirrus Logic WM8952ECS/RV is a 24-bit mono audio analog-to-digital converter with an integrated microphone preamplifier, digital signal processing, and an I2S audio interface. It supports sampling rates from 8 kS/s to 48 kS/s and is housed in a compact 28-W-CSP measuring 2.59 mm by 2.50 mm. The device operates from a 1.71 V to 3.6 V supply and is intended for space-constrained audio capture and voice-recording systems. An audio ADC is a mixed-signal semiconductor that converts an analog microphone or line-level waveform into a digital audio stream. The WM8952ECS/RV belongs to the audio ADC hierarchy, combining an analog-to-digital converter, programmable gain stage, microphone preamplifier, and digital filters into one package. This integration reduces the number of discrete signal-conditioning components required near a microphone capsule or audio input while preserving a standard digital interface for downstream processing. The converter provides 24-bit resolution and supports sampling rates extending to 48 kS/s. Its signal path includes a selectable high-pass filter and four fully programmable notch filters. A mixed-signal automatic level control function with noise gate helps maintain usable recording levels, and the PGA gain can be read back while ALC operation is active. These features are useful in microphone arrays, voice-capture products, and compact consumer audio equipment where environmental noise and changing source levels require active signal conditioning. The digital audio interface supports I2S as well as A-law and μ-law formats. I2S provides a framed, clocked connection to a digital audio processor, host controller, or audio codec, while the companded formats support legacy telephony and voice applications. The manufacturer datasheet describes the device as using an advanced sigma-delta converter design to provide high-quality audio across its 8 kS/s to 48 kS/s operating range. Typical uses include digital voice recorders, headset electronics, mobile audio accessories, microphone preamp modules, and compact industrial monitoring equipment. Its 28-W-CSP footprint is particularly useful when board area is restricted, although careful escape routing and stable analog supply design remain essential because the device combines sensitive analog input circuitry with a high-speed digital interface. Designers should treat the microphone input, digital clock lines, and supply connections as separate critical paths. Keep analog traces short, use a clean low-noise supply, and follow the manufacturer’s recommended application circuit and component values. The 1.71 V to 3.6 V operating range also requires the host system to remain compatible with the converter’s supply and I2S logic levels. This product page combines the manufacturer specifications, verified distributor listings, package information, application guidance, and replacement analysis for engineers evaluating the WM8952ECS/RV. It also distinguishes documented device functions from specifications that require confirmation from the full datasheet, helping designers plan microphone-front-end integration, interface compatibility, and board-level sourcing.

Devis Contact