Produits (44 000+)

XMC4400F100K512ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100K512ABXQSA1

XMC4400F100K512ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F100K512ABXQSA1 is a 32-bit Arm Cortex-M4 microcontroller in the XMC4000 family, operating at 120 MHz with 512 KB of flash memory in a 100-pin LQFP package with an exposed pad. It is designed for industrial embedded systems requiring deterministic real-time control, extensive digital peripherals, and integrated 10/100 Ethernet connectivity. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication interfaces, timers, analog peripherals, and general-purpose I/O into one device. The XMC4000 series combines an Arm Cortex-M4 processor core with industrial communications and real-time control resources, placing it within the hierarchy of embedded MCU, 32-bit microcontroller, and programmable semiconductor. This integration reduces component count while providing deterministic control for connected industrial equipment. The most prominent device characteristics are a 120 MHz operating frequency, 512 KB of flash, a 32-bit Arm Cortex-M4 core, and integrated 10/100 Ethernet support. The suffix-selected PG-LQFP-100-11 package provides 100 leads and an exposed thermal pad for board-level heat spreading. A 3.3 V operating supply is identified for this ordering option, while detailed RAM capacity, flash organization beyond the stated 512 KB, temperature limits, and peripheral assignments require confirmation from the manufacturer datasheet and pin description table. The Arm Cortex-M4 architecture supports efficient exception-based real-time operation through its interrupt system and integrated DSP extensions. XMC4000-family resources are suited to mixing communication protocols with deterministic control loops. The Ethernet MAC allows the MCU to participate directly in 10/100 Ethernet systems, reducing the need for a separate network controller when the selected board design includes the required magnetics, PHY, routing, and isolation or surge-protection implementation. Typical applications include industrial Ethernet controllers, programmable automation equipment, motor-control systems, industrial communications gateways, sensor-hub platforms, and connected test equipment. The combination of 120 MHz processing performance, 512 KB flash, and Ethernet integration is especially useful when a controller must combine real-time peripheral handling with network connectivity while retaining a compact 100-pin surface-mount footprint. PCB implementation should follow the package-specific land pattern, exposed-pad connection, decoupling, and thermal recommendations in the Infineon datasheet. Designers must also assign every multiplexed pin according to the manufacturer pin-description table and validate the external Ethernet interface, clock configuration, reset behavior, and peripheral clock requirements for the complete system. This product page combines the XMC4400F100K512ABXQSA1 ordering information with same-family alternatives, parameter-by-package comparisons, application guidance, and practical implementation notes. It is intended to help engineers determine whether the device meets the processor, memory, package, Ethernet, and lifecycle requirements of a new industrial embedded design.

Devis Contact
XMC4400F100K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100K512BAXQMA1

XMC4400F100K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F100K512BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 512 kB of embedded flash and a 100-pin PG-LQFP package with exposed pad. The device belongs to the XMC4000 family and integrates an Ethernet MAC with 10/100 Ethernet support for connected industrial equipment. Its operating supply is 3.3 V, while the -25 designation identifies the device’s extended temperature-grade ordering position. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor based on the Armv7E-M architecture. It combines a real-time processing core with timers, communication peripherals, memory interfaces, and GPIO in one integrated circuit. Within the product hierarchy, the XMC4400 is a microcontroller, embedded processor, and semiconductor designed for industrial control systems where deterministic peripherals and network connectivity are more important than general-purpose computing performance. Principal features include 120 MHz processing, 512 kB of flash memory, 10/100 Ethernet MAC capability, and a high-resolution PWM unit with 150 ps resolution. The fine PWM resolution is especially useful in digital power conversion, where precise duty-cycle control can improve regulation behavior and reduce harmonic distortion. The integrated communication and timing resources also reduce the need for external interface components in industrial Ethernet and automation equipment. The XMC4000 peripheral set includes dedicated digital power conversion resources and multiple high-speed timer inputs. This combination allows the microcontroller to control switched-mode power stages while managing communications and supervisory functions. The 100-pin LQFP package exposes substantially more I/O than smaller MCU packages, allowing dedicated signals for power-control loops, communications, diagnostics, and machine interfaces while preserving an exposed thermal pad for heat spreading. Typical applications include industrial Ethernet controllers, programmable logic controllers, digital power supplies, motor-control and inverter equipment, factory automation nodes, industrial communication gateways, and embedded data-acquisition systems. The 10/100 Ethernet capability is particularly suitable for legacy industrial networks, while the 150 ps PWM resolution supports high-resolution power-conversion control. PCB design should prioritize a low-impedance ground plane, careful routing of power-stage signals, and effective decoupling around the 3.3 V supply pins. The exposed pad must be connected to the appropriate ground-plane area according to the manufacturer’s land-pattern guidance. Ethernet traces require controlled topology and return-path continuity to minimize reflections and susceptibility to common-mode noise. This product page combines manufacturer specifications with practical design guidance, packaging information, and pin-compatible alternatives for engineering evaluation. It helps designers assess whether the 120 MHz Cortex-M4 core, 512 kB flash, 10/100 Ethernet support, 150 ps PWM resolution, and PG-LQFP-100 footprint fit an industrial control or digital power-conversion design before committing the exact ordering code to a BOM.

Devis Contact
XMC4400F100K512BAXUMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100K512BAXUMA1

XMC4400F100K512BAXUMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F100K512BAXUMA1 is a 32-bit industrial ARM Cortex-M4 microcontroller operating at up to 120 MHz, with 512 KB of flash memory and 10/100 Ethernet connectivity, housed in a PG-LQFP-100-11 package. It belongs to the XMC4000 family and combines a high-performance Cortex-M4 core with embedded communications and industrial-oriented peripherals. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communications interfaces, timers, analog inputs, and digital I/O into one device. The XMC4000 family is designed for embedded control systems where local processing, deterministic peripherals, and industrial communication are important. The XMC4400F100K512BAXUMA1 is suitable when a design requires 512 KB of program storage, 32-bit processing, and Ethernet in a 100-pin surface-mount package. The device provides a 120 MHz ARM Cortex-M4 core, 512 KB flash, and 10/100 Ethernet according to the Infineon product-page description. The 32-bit architecture supports efficient handling of networking stacks, control algorithms, and multiple peripheral tasks. Its PG-LQFP-100-11 package provides a large pin count for external signals and is compatible with conventional PCB assembly methods. The ordering code also indicates a tape-and-reel shipping format. The XMC4000 platform is intended for industrial embedded applications, including connected control equipment, industrial Ethernet nodes, motion and automation controllers, and communication-oriented embedded systems. The integrated Ethernet capability can reduce the need for a separate network controller when the system requires 10/100 Ethernet connectivity. The 512 KB flash capacity allows firmware, configuration data, and application logic to be stored locally. Designers should use the Infineon XMC4400 datasheet for the complete electrical characteristics, memory map, peripheral multiplexing, pin definitions, package dimensions, and recommended operating conditions. PCB design should preserve the specified decoupling, clock, Ethernet routing, and ground-return requirements. Software development should use the corresponding XMC4000 peripheral library, startup files, linker configuration, and device headers for the exact ordering designation. This page provides a structured engineering summary of the XMC4400F100K512BAXUMA1, including its core, memory, package, interface, application fit, procurement considerations, and verified Infineon documentation links. It is intended to support design review, sourcing, and board-level planning for industrial embedded systems.

Devis Contact
XMC4400F64F256ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64F256ABXQMA1

XMC4400F64F256ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon XMC4400F64F256ABXQMA1 is a 32-bit ARM Cortex-M4 microcontroller operating up to 120 MHz, with 256 KB of embedded flash and an Ethernet MAC, housed in a 64-pin LQFP package with an exposed pad. It is designed for industrial embedded systems requiring deterministic real-time control, high-speed serial connectivity, and integrated Ethernet communication. The device operates from a 3.3 V supply according to its ordering designation. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one device. Within the product hierarchy, the XMC4400 is an ARM Cortex-M4 MCU, an embedded processor within the XMC4000 family. It combines real-time control performance with industrial peripherals, allowing one device to supervise sensors, execute control algorithms, and exchange data through Ethernet or serial interfaces. The principal features visible in the ordering information include a 120 MHz Cortex-M4 core, 256 KB of flash memory, a 3.3 V operating supply, and an Ethernet MAC. The 32-bit RISC architecture supports compact, efficient embedded software, while the integrated Ethernet MAC provides a dedicated path for network-connected industrial equipment. The LQFP-64 exposed-pad package also provides a substantial underside thermal and ground connection for designs requiring improved electrical and thermal performance. The XMC4400F64F256ABXQMA1 belongs to the industrial XMC4000 product class, making it suitable for control platforms that require both deterministic operation and communications. The 256 KB flash capacity supports embedded boot code, configuration data, and application firmware in a single-controller design. Its 120 MHz operating rate provides additional timing margin for protocol processing, digital signal handling, and supervisory control tasks. Typical applications include industrial Ethernet controllers, programmable automation equipment, motor and motion-control systems, connected sensor gateways, industrial communication equipment, and embedded measurement systems. In these systems, the MCU can execute real-time control loops while the Ethernet MAC manages networked communication without requiring a separate network controller. PCB implementation requires correct assignment of the 3.3 V supply, decoupling, clock, reset, debug, and communication signals according to the manufacturer pin-description table. The exposed pad should be connected to the intended ground plane and thermally sized for the final board stack-up. Firmware should also validate operating limits, peripheral clock configurations, and Ethernet physical-layer requirements before field deployment. This page combines the manufacturer ordering information with practical application guidance, package considerations, and a parameter-focused comparison with members of the XMC4400 family. These engineering details help designers distinguish flash-density or ordering-code changes from changes that require PCB or firmware modification.

Devis Contact
XMC4400F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64F256BAXQMA1

XMC4400F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64F256BAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz operating frequency, 256 KB of embedded Flash memory, and a 100-pin PG-LQFP surface-mount package. It belongs to the XMC4000 microcontroller family and combines a high-resolution PWM unit, analog and digital peripherals, and Ethernet MAC capability in one industrial control device. The orderable designation indicates an industrial temperature option and 256 KB Flash configuration. An industrial microcontroller is a semiconductor device designed to execute embedded control software under real-time operating conditions. The XMC4400 follows the hierarchy of microcontroller, embedded processor, and industrial semiconductor. Its ARM Cortex-M4 processing architecture provides a 32-bit execution environment for motor control, communications, industrial automation, and connected equipment. Unlike a general-purpose desktop processor, it is intended for deterministic control of sensors, actuators, communication links, and safety-oriented peripheral functions. The verified manufacturer information identifies an operating frequency of up to 120 MHz, 256 KB of Flash, and an Ethernet MAC as principal device attributes. The XMC4400 also incorporates Infineon's high-resolution PWM capability, whose published resolution reaches 150 ps. These features support applications that benefit from precise timing, fast control-loop execution, and deterministic peripheral interaction without requiring a separate high-resolution PWM device. Technical implementation uses the ARM Cortex-M4 core within the XMC4000 architecture and integrates memory, communications, timing, analog, and debugging resources into a single device. Flash provides 256 KB for firmware and application code, while SRAM requirements and other memory details remain dependent on the complete ordering designation and datasheet tables. The PG-LQFP-100 package is a 100-pin plastic surface-mount package suited to multilayer industrial control boards where a fine-pitch leaded package is preferred over a ball-grid array. Typical uses include industrial Ethernet equipment, motor and power conversion controllers, factory automation nodes, building automation interfaces, and embedded communication platforms. For networking products, the integrated Ethernet MAC reduces the need for external media-access control, although a suitable Ethernet PHY and magnetic interface are still required. For motor control, the high-resolution PWM unit supports precise edge placement and timing while the 120 MHz Cortex-M4 core handles supervisory control and communications tasks. Designers should preserve the pin assignments and power conditions defined for the PG-LQFP-100 ordering designation, use the manufacturer's recommended decoupling and clock configuration, and verify Ethernet transceiver requirements before layout. Software validation should include clock-tree, reset, startup, and peripheral-instance verification. PCB thermal and signal-integrity reviews are essential when high-speed communication, switching outputs, or adjacent sensitive analog circuitry share the board. This product record consolidates verified manufacturer and distributor information, pin-package identification, pricing status, application guidance, and transparent engineering comparisons. It also distinguishes verified facts from parameters that require confirmation in the complete manufacturer datasheet, helping engineers accelerate sourcing without presenting unverified electrical limits as design guarantees.

Devis Contact
XMC4400F64F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64F512ABXQMA1

XMC4400F64F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64F512ABXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at up to 120 MHz, with 512 KB of flash memory and Ethernet MAC capability, in a 64-pin PG-LQFP surface-mount package. It belongs to the XMC4000 family and combines a Cortex-M4 processor core with embedded DSP instructions, flash memory, Ethernet connectivity, and industrial-oriented peripherals. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces into one component. Within the product hierarchy, the XMC4400F64F512ABXQMA1 is an Arm Cortex-M4 microcontroller, part of the XMC4000 family, and an industrial embedded-control IC. This combination makes it appropriate for compact control systems that require deterministic real-time execution alongside an Ethernet-capable communications architecture. The principal device characteristics include a 120 MHz CPU frequency, 512 KB of flash organized as 512K × 8, 32-bit processing, and a 64-pin PG-LQFP package. The industrial ordering designation XMC4400-F64F512-BA identifies the XMC4400, 120 MHz core, 512 KB flash configuration, and industrial grade. The Arm Cortex-M4 core includes a built-in DSP instruction set, supporting efficient fixed-point signal-processing operations without requiring a separate DSP in suitable control systems. Ethernet MAC capability differentiates this device from basic general-purpose microcontrollers and makes it relevant to industrial networking, connected automation, and embedded communications equipment. The exact peripheral mix, RAM configuration, electrical limits, and pin functions must be confirmed in the XMC4400 manufacturer datasheet before schematic capture or firmware deployment. The XMC4000 family documentation also covers derivative-specific ordering information, electrical characteristics, package details, and errata. Typical applications include industrial Ethernet controllers, motor-control platforms, factory automation nodes, CAN-connected equipment, embedded gateways, and real-time sensor-processing systems. In these designs, the 120 MHz Cortex-M4 core executes control logic while the DSP instruction set accelerates suitable filtering, signal transformation, and modulation workloads. The 512 KB flash capacity provides room for an embedded application, protocol stacks, configuration data, and boot code within a single device. PCB design should account for the 64-pin LQFP footprint, exposed thermal and routing requirements, power-supply decoupling, Ethernet signal integrity, and programming access. Firmware projects should verify startup behavior, interrupt-vector configuration, peripheral availability, and pin multiplexing against the exact ordering code. A hardware redesign should not be attempted unless the alternative device has the same package, pinout, power architecture, peripheral mapping, and software-support requirements. This product summary combines the manufacturer ordering information, distributor identification, datasheet references, and engineering guidance for XMC4400F64F512ABXQMA1. It also highlights practical selection, comparison, application, and sourcing questions that help engineers determine whether the 120 MHz Cortex-M4 architecture and 512 KB flash configuration match the intended industrial embedded design.

Devis Contact
XMC4400F64F512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64F512BAXQMA1

XMC4400F64F512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64F512BAXQMA1 is a 32-bit ARM Cortex-M4 microcontroller rated at 120 MHz, with 512 KB of flash memory and a 64-pin TQFP exposed-pad package. It is a 3.3 V industrial member of the XMC4000 family that combines a floating-point and DSP-capable processor core with Ethernet MAC, CAN, high-resolution PWM, and other industrial peripherals. An MCU is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one die. The ARM Cortex-M4 is a 32-bit processor architecture within the broader microcontroller and embedded-semiconductor hierarchy. It supports real-time control tasks that require deterministic peripheral access, while the XMC family adds Ethernet and CAN connectivity commonly used in industrial automation, networking, motor-control, and communications equipment. Key verified features include a 120 MHz operating frequency, 512 KB of flash, and a 64-pin PG-TQFP-64-19 surface-mount package. The device also includes a 150 ps high-resolution PWM capability, an Ethernet MAC, CAN interfaces, an FPU, DSP instructions, and a common-ground architecture. In packages with an exposed die pad, Infineon requires the pad to be connected to the common ground alongside the VSS, VSSA, and VSSO pins. The Cortex-M4 architecture is suitable for floating-point control algorithms and fixed-point signal processing, while the XMC peripheral set reduces the need for external interface devices. Ethernet MAC support can simplify industrial Ethernet connectivity, and CAN provides a robust option for distributed automation and vehicle or industrial control networks. The high-resolution PWM unit is especially relevant to precise timing, digital-to-analog conversion, and motor-control applications. Typical uses include industrial Ethernet controllers, factory automation nodes, CAN-connected motor systems, power-conversion equipment, and embedded communications platforms. At 120 MHz, the MCU has sufficient processing capacity for protocol handling and real-time control, but designers should evaluate interrupt latency, peripheral timing, memory bandwidth, and thermal conditions for each system. The exposed pad requires careful PCB layout and an adequate ground plane. The package must be soldered according to Infineon's land-pattern and reflow guidance, while the exposed die pad and all ground pins must be tied to the common ground. The 150 ps PWM resolution should also be checked against the timer clock and required output timing rather than treated as a universal system timing guarantee. This page consolidates verified distributor and manufacturer information, package characteristics, functional applications, and cross-reference candidates. The available data identifies only a limited number of same-package alternatives; their temperature-grade, ordering-code, and detailed electrical differences should be confirmed against the Infineon ordering information before production substitution.

Devis Contact
XMC4400F64K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64K256ABXQSA1

XMC4400F64K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F64K256ABXQSA1 is a 32-bit ARM Cortex-M4 microcontroller with a 120 MHz operating frequency, 256 KB of flash memory, 80 KB of RAM, and a 3.3 V supply in a 64-pin PG-LQFP package with an exposed pad. It belongs to the XMC4000 family and combines deterministic microcontroller control with a high-performance 32-bit processor core. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, timers, analog interfaces, and GPIO into one device. The XMC4400F64K256ABXQSA1 sits within the hierarchy of embedded controller, 32-bit microcontroller, ARM Cortex-M4 microcontroller, and single-chip control IC. It is intended for systems that need more computing capability and memory than a basic 8-bit or 16-bit controller without moving to a complex application processor. Principal features include a 120 MHz ARM Cortex-M4 core, 256 KB of flash program memory, 80 KB of SRAM, and operation from a 3.3 V supply. The 64-pin LQFP package exposes a practical mix of digital I/O and embedded peripherals while providing an exposed thermal pad for improved heat spreading on multilayer PCBs. The automotive-grade ordering designation indicates suitability for demanding industrial or automotive control environments when the full ordering information and qualification requirements are confirmed for the assembled system. Technically, the Cortex-M4 architecture supports efficient real-time control through its instruction set, interrupt handling, and integrated peripherals. This makes the device appropriate for deterministic control loops that combine sensor acquisition, communications, and actuator timing. Its 256 KB flash provides room for application code, configuration data, and boot logic, while the 80 KB SRAM supports working state, buffers, stacks, and peripheral data movement without relying on external memory in many designs. Typical applications include industrial motor and motion control, automotive body and auxiliary control, robotics, building automation, embedded instrumentation, and connected industrial equipment. In each case, the processor can execute control logic while dedicated peripherals handle communication, timing, and digital input or output. A design using the XMC4400F64K256ABXQSA1 should confirm pin multiplexing, peripheral availability, clock configuration, and startup requirements against the manufacturer datasheet. PCB implementation should preserve the electrical and thermal requirements associated with the exposed-pad LQFP. Place the device according to the package land pattern, connect the exposed pad to the appropriate ground plane, provide the specified decoupling capacitors, and route high-speed or sensitive signals away from noisy power-conversion stages. Automotive and safety-related designs also require a complete review of the ordering code, temperature grade, errata, and applicable qualification documentation. This page consolidates the verified XMC4400F64K256ABXQSA1 specifications, sourcing information, replacement analysis, and practical implementation guidance. It helps engineers evaluate the device against the XMC4000 series and identify whether a PCB, firmware, or qualification change is required before selecting a replacement.

Devis Contact
XMC4400F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64K256BAXQMA1

XMC4400F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F64K256BAXQMA1 is a 32-bit Arm Cortex-M4 industrial microcontroller with a 120 MHz maximum clock, 256 KB of flash memory, 80 KB of SRAM, and a 64-pin PG-LQFP-64-19 package. The ordering code identifies the 256 KB flash configuration, 256 KB-class memory organization, industrial qualification, 3.3 V supply, and tray packaging. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals into one device. The XMC4400 belongs to the XMC4000 family of 32-bit Arm Cortex-M4 microcontrollers, combining real-time control capability with Ethernet communications and a high-resolution PWM architecture. Its memory hierarchy supports connected industrial equipment, distributed control nodes, and compact embedded automation systems. Key features include a 120 MHz Arm Cortex-M4 processor, 256 KB flash, 80 KB SRAM, 10/100 Ethernet, and a high-resolution PWM unit with 150 ps resolution. The 64-pin LQFP package provides a practical surface-mount form factor for industrial controller designs. A 3.3 V operating supply and single-core 32-bit architecture simplify system integration while supporting deterministic control and communication workloads. The XMC4400 architecture uses an Arm Cortex-M4 processor with integrated digital signal processing capabilities. Its high-resolution PWM unit supports accurate timing, motor-drive modulation, and power conversion control, while the Ethernet interface enables network-connected industrial equipment. The manufacturer describes the device as an industrial MCU and identifies the XMC4400-F64K256-BA as having 256 KB flash, 80 KB SRAM, and 10/100 Ethernet capability. Typical applications include industrial Ethernet controllers, programmable automation equipment, motor-control systems, power-conversion controllers, sensor-hub platforms, and embedded network gateways. Its combination of real-time processing, Ethernet connectivity, and precise PWM timing makes it appropriate for machinery that must execute control algorithms while exchanging data with supervisory systems. Designers should treat all 64 package pins as electrically significant and follow the complete pin-description and package information in the manufacturer datasheet. For mixed-signal or high-speed Ethernet layouts, preserve the recommended separation, grounding, and decoupling arrangement. Firmware validation should also include startup behavior, Ethernet timing, peripheral pin multiplexing, and worst-case operating conditions. This product page combines the manufacturer's electrical and ordering information with practical integration guidance, application fit, package details, and like-for-like replacements. It is intended to help engineers assess the XMC4400F64K256BAXQMA1 against other XMC4400 memory configurations without overlooking firmware, pin-multiplexing, and qualification differences.

Devis Contact
XMC4400F64K512ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64K512ABXQSA1

XMC4400F64K512ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F64K512ABXQSA1 is a 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory and a 64-pin PG-LQFP-19 package with an exposed pad. The device belongs to the XMC4000 family and supports a 3.3 V operating voltage. Its combination of a Cortex-M4 core, substantial embedded flash, Ethernet MAC capability, and a 64-pin industrial package makes it suitable for connected industrial automation, communications, and real-time control systems. A microcontroller such as the XMC4400F64K512ABXQSA1 integrates a processor core, embedded nonvolatile program memory, SRAM, peripherals, and communication interfaces into one semiconductor package. Within the device hierarchy, it is an Arm Cortex-M4 MCU, a 32-bit microcontroller and embedded processor. The XMC4000 family combines deterministic real-time control with Ethernet-oriented connectivity, allowing one device to manage machine control tasks and networked communication functions. The key specifications are a 120 MHz maximum CPU frequency, 512 KB of flash organized as 512K × 8 bits, and a 64-pin PG-LQFP-19 package. Infineon identifies the related XMC4400-F64K512-BA ordering designation as an industrial Arm Cortex-M4 MCU with Ethernet MAC. The suffix used for the complete ordering code also identifies the package, temperature class, and other ordering options, so engineers should preserve the full MPN when procuring or redesigning a PCB. The Cortex-M4 architecture uses the ARM instruction set and is suitable for interrupt-driven embedded workloads. Its 120 MHz operating point provides substantially more processing headroom than lower-frequency general-purpose MCUs, while 512 KB of flash permits larger application code, boot code, communication stacks, and field-update routines on the same die. Peripheral details, clock configurations, memory sizes beyond flash, and electrical limits must be confirmed in the XMC4400 manufacturer datasheet and its derivative-device ordering information. Typical uses include industrial Ethernet controllers, factory automation equipment, networked sensors, motor-control supervisory systems, and industrial communications gateways. The Ethernet MAC makes the MCU particularly relevant where local control and network connectivity must share one platform. It can also support secure serial or fieldbus communication designs when the appropriate peripherals and external transceivers are used, although the exact interface mix for this derivative must be checked in the device documentation. PCB design should preserve the exposed-pad connection specified for the PG-LQFP-19 package and follow the manufacturer’s land-pattern and thermal-land guidance. The 120 MHz processing capability requires careful clock, decoupling, and signal-integrity planning, while the Ethernet interface demands controlled routing and appropriate external network components. Do not assume that an MCU with the same package is electrically interchangeable; validate supply limits, peripheral mapping, pin multiplexing, boot behavior, and software-device configuration before substitution. This product record combines the manufacturer ordering information, family datasheet characteristics, package details, lifecycle indication, and practical design guidance. It also distinguishes true drop-in replacements from merely similar controllers, helping engineers assess PCB reuse, firmware impact, sourcing status, and qualification requirements without treating package similarity as proof of compatibility.

Devis Contact
XMC4400F64K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64K512BAXQMA1

XMC4400F64K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64K512BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory, 80 KB of RAM, and an Ethernet MAC, all housed in a 64-pin LQFP package. The XMC4400 combines a high-performance microcontroller core with advanced motor-control peripherals, including a high-resolution PWM unit capable of 150 ps resolution. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor in the microcontroller family, where the Arm Cortex-M core sits between a general-purpose microprocessor and a highly integrated embedded control device. The XMC4400 belongs to Infineon's XMC4000 industrial microcontroller family, combining real-time digital control with communication and analog-adjacent peripheral functions on one integrated circuit. Key device features include a 120 MHz Cortex-M4 core, 512 KB of program flash, 80 KB of RAM, an integrated Ethernet MAC, and a 64-pin PG-LQFP package. The 150 ps high-resolution PWM capability supports precision timing in motor-control and power-conversion systems. The combination of Ethernet connectivity and deterministic control peripherals makes the device suitable for industrial automation, networking, and embedded motor-control designs. Technically, the XMC4400 integrates an ARM Cortex-M4 processor with Infineon's peripheral set. Its high-resolution PWM and advanced timer architecture are intended to reduce the need for external timing and signal-generation components. The Ethernet MAC supports network-oriented industrial equipment, while the flash and RAM capacities provide sufficient space for control firmware, communication stacks, and application logic. Typical applications include industrial Ethernet controllers, servo and motor drives, programmable logic controllers, industrial communication modules, and embedded automation equipment. The 120 MHz processing rate supports responsive control loops, while the Ethernet MAC provides a path to connected factory networks. System designers must still verify peripheral assignments, package dimensions, pin multiplexing, and operating limits against the complete manufacturer datasheet before schematic release. A primary design consideration is firmware and peripheral planning. Because the LQFP-64 package exposes a finite number of pins, pin multiplexing, analog functions, debug access, clock configuration, and Ethernet connectivity must be assigned early. PCB designers should also follow the manufacturer's recommended decoupling, exposed-pad, and high-speed layout guidance before a new board is fabricated. This product data combines the verified manufacturer and distributor information with practical comparison notes and engineering guidance that are not presented as a substitute for the complete Infineon XMC4400 datasheet. Exact electrical characteristics, pricing, lead time, lifecycle status, and package details should be confirmed against the latest manufacturer documentation and distributor records.

Devis Contact
XMC4402F100F256ABXQMA1 - 120MHz 256KB MCU | Infineon
XMC4402F100F256ABXQMA1

XMC4402F100F256ABXQMA1 - 120MHz 256KB MCU | Infineon

Infineon Technologies XMC4402F100F256ABXQMA1 is a 32-bit Arm Cortex-M4 microcontroller in the XMC4000 family, operating at 120 MHz with 256 KB of embedded flash and housed in a 100-pin PG-LQFP-11 package. It operates from a 3.3 V supply and includes Ethernet MAC connectivity, positioning it for connected industrial equipment that requires deterministic real-time control alongside network communication. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor used to execute control software, monitor sensors, operate communication peripherals, and manage real-time system tasks. The Cortex-M4 architecture belongs to the embedded microcontroller hierarchy rather than application processors or DSPs. It combines instruction-efficient processing, interrupt-driven peripherals, and deterministic peripherals in a device designed for industrial embedded control and connected automation. The XMC4402F100F256ABXQMA1's principal characteristics are its 120 MHz operating frequency, 256 KB flash memory, and integrated Ethernet MAC. Flash retains firmware without a separate external memory device, while the Ethernet MAC supports network-connected designs. The 100-pin LQFP package exposes the microcontroller's digital interfaces and analog and connectivity functions through a relatively high pin count, making it practical for medium-complexity industrial control boards. The XMC4000 architecture is organized around an Arm Cortex-M4 core and dedicated peripherals for embedded control and communications. Its Ethernet capability makes it especially relevant to industrial Ethernet equipment, factory automation controllers, networked sensor hubs, and embedded gateways. Firmware can divide the device between control-loop execution and network protocol handling, reducing the need for separate interface devices when the application does not require higher protocol-processing performance. Typical uses include industrial Ethernet controllers, programmable automation modules, building automation equipment, networked sensor interfaces, and compact machine-control systems. The combination of 120 MHz processing, 256 KB flash, and Ethernet MAC makes the part suitable for products that must respond to local inputs while also exchanging status, configuration, or diagnostic data over a network. PCB design should preserve the package's thermal and electrical requirements, including careful decoupling, a stable 3.3 V supply, and compliant handling of high-speed Ethernet signals. Confirm the exact pin assignments, peripheral multiplexing, and clock configuration in the Infineon product documentation before finalizing board connections. Software development should likewise validate the selected peripheral instance, interrupt routing, and Ethernet PHY interface against the system requirements. This product summary combines the confirmed XMC4402F100F256ABXQMA1 characteristics with practical selection, comparison, and design guidance. It highlights the processor core, memory configuration, package, Ethernet capability, likely industrial applications, and the limitations that must be checked before treating another microcontroller as a drop-in replacement.

Devis Contact
XMC4402F100F256BAXQMA1 - 120MHz Cortex-M4 256KB Flash LQFP-100 | Infineon
XMC4402F100F256BAXQMA1

XMC4402F100F256BAXQMA1 - 120MHz Cortex-M4 256KB Flash LQFP-100 | Infineon

The Infineon XMC4402F100F256BAXQMA1 is a 32-bit ARM Cortex-M4 microcontroller operating at 120 MHz, with 256 KB of flash memory and an Ethernet MAC in a 100-pin PG-LQFP package. It combines a single-cycle DSP multiply-accumulate and floating-point unit with 8-channel DMA and dedicated USB and Ethernet DMA resources for data-intensive industrial embedded systems. The XMC4000 family belongs to the industrial microcontroller segment, combining an Arm Cortex-M4 processor with Infineon peripherals designed for real-time control and connected automation. The operating voltage range is 3.13 V to 3.63 V, and the device supports USB 2.0 full-speed on-the-go. Its 120 MHz Cortex-M4 core is suitable for motor-control, industrial communication, measurement, and embedded networking applications. Key features include a high-resolution PWM unit with 150 ps resolution, a 120 MHz CPU frequency, 256 KB of flash, and dedicated DMA channels for USB and Ethernet. These resources reduce CPU intervention in data-transfer-intensive designs and support deterministic control loops where predictable timing is more important than maximum general-purpose performance. The Ethernet MAC enables connected industrial equipment using standard network infrastructure. The XMC4402F100F256BAXQMA1 is supplied in a 100-pin LQFP package with an exposed-pad variant indicated by the manufacturer ordering information. The package provides a conventional leaded footprint for industrial control boards and simplifies assembly where fine-pitch BGA packages are undesirable. The device is specified for industrial applications and is identified as part of Infineon's XMC4000 microcontroller portfolio. Typical applications include industrial Ethernet controllers, servo and motor-control systems, PLC peripherals, factory automation nodes, sensor gateways, and USB-connected measurement equipment. Designers should confirm startup, clock, and memory configuration against the XMC4400 family documentation and use the manufacturer's pin-description tables when assigning PCB nets. This page consolidates the manufacturer product listing, distributor technical summaries, family-level alternatives, and practical design guidance. It also highlights where different XMC4000 derivatives differ in flash capacity, temperature-grade ordering codes, or package-related ordering details so engineers can shortlist the correct device before schematic capture.

Devis Contact
XMC4402F100K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F100K256ABXQSA1

XMC4402F100K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4402F100K256ABXQSA1 is a 32-bit Arm Cortex-M4 microcontroller in the XMC4000 industrial series, operating at up to 120 MHz with 256 KB of Flash memory and 80 KB of SRAM. The device is packaged in a 100-pin LQFP with exposed pad, identified as PG-LQFP-100-11, and is supplied in tray packaging according to the ordering information. It is designed for embedded control systems that combine real-time processing, Ethernet connectivity, and a broad set of industrial peripherals. An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor core widely used in embedded control, industrial automation, communications, and connected equipment. The XMC4000 family combines the Cortex-M4 core with memory, timing, serial, digital, analog, and Ethernet-related resources on one integrated circuit. This integration allows an industrial controller to handle control loops, communication tasks, and supervisory logic without requiring several discrete processors. The XMC4402F100K256ABXQSA1 provides 256 KB of Flash for program storage, 80 KB of SRAM for working memory, a maximum clock frequency of 120 MHz, and Ethernet support according to the Infineon product page. Its 32-bit architecture supports efficient handling of multiple I/O tasks, while the 100-pin LQFP exposed-pad package provides a high pin count for external interfaces and a thermal path for improved heat dissipation. The 3.3 V operating voltage is stated in the product listing. The device is suitable for industrial automation controllers, networked sensors, motor-control supervisory systems, building automation equipment, and industrial communications equipment. Ethernet is particularly useful when the controller must exchange real-time status, configuration, or process data with supervisory systems. The 256 KB Flash capacity is appropriate for firmware, protocol stacks, and application code, while 80 KB of SRAM supports buffering and time-critical execution. Designers should treat the exposed pad as a thermal and electrical land-pattern feature and follow the manufacturer land-pattern guidance when placing the device on a multilayer PCB. Decoupling should be placed directly at the supply pins, and the 120 MHz operating mode requires careful clock, reset, and signal-routing discipline. Firmware must also account for the exact peripheral assignments, clock configuration, startup behavior, and peripheral limits defined by the Infineon documentation for this ordering code. This page summarizes the principal orderable-device characteristics and distinguishes the exact XMC4402F100K256ABXQSA1 configuration from related XMC family members. Engineers should compare peripheral mix, memory size, qualification, package, and software compatibility before approving any substitution. Use the Infineon product page and datasheet for the definitive pin description, electrical limits, exposed-pad layout, and configuration details.

Devis Contact
XMC4402F100K256BAXQMA1 - 120MHz Cortex-M4 | Infineon
XMC4402F100K256BAXQMA1

XMC4402F100K256BAXQMA1 - 120MHz Cortex-M4 | Infineon

Infineon Technologies XMC4402F100K256BAXQMA1 is a 32-bit Arm Cortex-M4 industrial microcontroller operating at 120 MHz, with 256 KB of flash memory, 80 KB of SRAM, and Ethernet connectivity in a 100-pin PG-LQFP exposed-pad package. The device combines deterministic timer performance with a high-resolution PWM unit offering 150 ps resolution, making it suitable for precise motor, power conversion, and industrial control systems. An MCU is a semiconductor that integrates a processor core, memory, peripherals, and interfaces into one device used to control equipment. The XMC4400 family belongs to the hierarchy of embedded processor, microcontroller, 32-bit microcontroller, and industrial microcontroller. Infineon positions the XMC4402 for mixed-signal and timer-driven applications where deterministic control, networking, and real-time peripheral performance are important. Key features include a 120 MHz Arm Cortex-M4 processor, 256 KB of program flash, and 80 KB of SRAM. Its Ethernet MAC supports connected industrial equipment, while the high-resolution PWM capability supports precision actuator and power-control tasks. The PG-LQFP-100 package exposes 100 terminals and includes an exposed pad for board-level thermal management. Operating voltage is identified as 3.3 V in distributor product information. The XMC4400 architecture integrates the Cortex-M4 processing core with Infineon peripherals intended for industrial real-time control. Its timer and PWM resources can generate high-resolution edge timing, improving resolution in motor drive, digital power conversion, and mixed-signal feedback loops. The 256 KB flash allocation provides space for application code and configuration data, while 80 KB of SRAM supports working memory, diagnostics, and control-loop calculations. Typical applications include industrial motor controllers, servo drives, programmable power supplies, PLC communication modules, industrial Ethernet equipment, and precision sensor-control platforms. In these systems, the MCU can execute control algorithms while using its Ethernet MAC for supervisory communication and its PWM peripherals for accurate actuator or converter timing. PCB implementation should follow the manufacturer package footprint, land pattern, and pin-assignment tables. Decoupling, analog and digital supply routing, clock stability, exposed-pad thermal design, and high-speed signal layout require careful review. Because the LQFP package has 100 fine-pitch leads, assembly quality and solder-joint inspection are especially important. This product record combines the manufacturer family positioning, verified distributor specifications, same-footprint alternatives, and practical selection guidance for engineers evaluating the XMC4402F100K256BAXQMA1 for industrial embedded-control designs.

Devis Contact
XMC4402F100K256BAXUMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F100K256BAXUMA1

XMC4402F100K256BAXUMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4402F100K256BAXUMA1 is a 32-bit Arm Cortex-M4 microcontroller in the XMC4000 family, operating at 120 MHz with 256 kByte of embedded flash and 80 kByte of SRAM. The device includes Ethernet connectivity and is packaged in a PG-LQFP-100-25 surface-mount package. Its industrial designation identifies the XMC4402-F100K256-BA device variant, while the XAIPART ordering code denotes the qualified supplier packing configuration. A microcontroller is a semiconductor integrated circuit that combines a processor core, embedded memory, peripherals, and communication interfaces on one device. The Arm Cortex-M4 core places this XMC4000 part in the 32-bit embedded-controller hierarchy, where it supports real-time control, communications, and industrial automation. Compared with a general-purpose microprocessor, the MCU integrates dedicated peripherals and deterministic control resources close to the CPU, reducing system complexity and allowing firmware to execute directly from embedded flash. The principal features of this MCU include a 120 MHz Cortex-M4 processor, 256 kByte of flash memory, and 80 kByte of SRAM. Its Ethernet interface expands the device beyond a basic real-time controller, enabling connected industrial equipment, network gateways, and embedded control nodes. The 100-pin LQFP package provides a high pin count suitable for mixed-signal, communication, and industrial peripheral requirements while retaining a familiar leaded surface-mount assembly format. Architecturally, the Cortex-M4 processor supports efficient 32-bit computation and the exception-based control model used by embedded Arm Cortex-M devices. Integrating flash and SRAM allows substantial control code and working data to remain on-chip. The Ethernet capability creates a bridge between real-time control functions and network communication, allowing status information, commands, and diagnostic data to be exchanged without requiring a separate network controller in designs where appropriate. Typical uses include industrial Ethernet controllers, factory automation equipment, networked sensor hubs, motor and motion-control systems, communications equipment, and embedded gateways. The combination of 120 MHz processing performance and Ethernet is particularly useful when control tasks must coexist with network protocol handling. In such systems, the MCU can sample process inputs, execute deterministic control logic, and exchange operational data through the integrated Ethernet interface. PCB design should follow the Infineon pin-description and package information, paying particular attention to power-supply pins, ground distribution, high-speed Ethernet routing, and external-component placement. Keep the Ethernet differential pair geometry consistent, provide the required decoupling close to the device, and confirm unused-pin treatment directly against the manufacturer pin table before fabrication. Firmware development also requires the correct XMC4400-family device configuration, startup files, and peripheral library support for the selected silicon revision. This product page consolidates the verified manufacturer identity, exact MPN ordering information, core memory capacity, processor speed, Ethernet capability, package details, drop-in candidates, application guidance, and engineering comparison points. It supports faster component selection while directing design validation back to the manufacturer documentation for final pin assignments, timing, electrical limits, and lifecycle decisions.

Devis Contact
XMC4402F64F256ABXQMA1 - 120MHz Cortex-M4 256KB Flash MCU
XMC4402F64F256ABXQMA1

XMC4402F64F256ABXQMA1 - 120MHz Cortex-M4 256KB Flash MCU

The Infineon XMC4402F64F256ABXQMA1 is a 32-bit single-core ARM Cortex-M4 microcontroller operating at 120 MHz, with 256 kByte of flash memory, 80 kByte of SRAM, and 10/100 Ethernet connectivity in a 64-pin PG-LQFP-64-19 package with an exposed pad. It belongs to the Infineon XMC4000 series for industrial applications and combines real-time microcontroller control with an integrated Ethernet interface. A microcontroller is a programmable system-on-chip containing a CPU core, memory, peripherals, and communication interfaces. Within the product hierarchy, this device is an ARM Cortex-M4 microcontroller, an embedded processor, an integrated circuit, and ultimately a semiconductor. The XMC4000 family is designed for industrial control systems where deterministic execution, Ethernet connectivity, and a relatively large embedded memory footprint are more important than the power density of a small sensor node. Three headline characteristics define this part. The 120 MHz Cortex-M4 core provides 32-bit processing with integrated floating-point instruction support. The 256 kByte program flash supplies room for a bootloader, application firmware, and network configuration, while 80 kByte of SRAM supports working buffers, protocol stacks, and control data. The integrated 10/100 Ethernet interface allows the controller to participate directly in industrial Ethernet networks without a separate interface controller. The XMC4402F64F256ABXQMA1 is identified as an industrial-grade XMC4000-series member. Its PG-LQFP-64-19 mechanical format provides 64 leads plus a thermal exposed pad, offering a larger pin count than small-outline packages and practical access to mixed-signal, communications, and digital I/O resources. The verified distributor listing confirms single-core operation, 120 MHz clocking, 256 kByte flash, and 3.3 V supply information. Additional detailed timing, peripheral, and absolute-maximum parameters must be confirmed in the manufacturer datasheet before a new design is released. Typical applications include industrial Ethernet controllers, programmable logic controllers and automation equipment, networked motor and process controllers, industrial communication gateways, and embedded test systems. For Ethernet-connected control equipment, the combination of Cortex-M4 processing, 80 kByte SRAM, and integrated 10/100 Ethernet reduces the external component count compared with a discrete Ethernet-interface architecture. Engineers should still budget memory margin for the selected protocol stack and application firmware. The most important design consideration is thermal management around the exposed pad. The LQFP package requires a land pattern that connects the thermal pad to a properly sized ground or thermal copper plane; a datasheet-based thermal design should verify the junction and ambient temperature limits under the maximum operating clock and Ethernet activity. The 3.3 V operating point should also be checked against every attached peripheral, level-shifting interface, and supply tolerance. This page combines the verified Infineon and distributor specifications with practical selection guidance, pin-package details, application analysis, and same-package replacement information that is not normally consolidated on a distributor listing. It distinguishes documented facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers evaluate the XMC4402F64F256ABXQMA1 efficiently without treating unverified generic MCU specifications as fact.

Devis Contact
XMC4402F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F64F256BAXQMA1

XMC4402F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon XMC4402F64F256BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at up to 120 MHz, with 256 kByte of flash memory, 80 kByte of SRAM, and 10/100 Ethernet connectivity in a PG-LQFP-100-25 package. It combines a high-performance 32-bit processor core with an Ethernet interface, high-resolution PWM, and an extensive peripheral set for industrial control applications. An industrial microcontroller is a semiconductor device designed to execute embedded control logic, communicate with external equipment, and operate reliably in industrial environments. The XMC4000 family combines the Arm Cortex-M4 processor architecture with Ethernet, timers, analog and digital interfaces, and embedded flash and SRAM. This places it within the hierarchy of embedded processor, microcontroller, industrial control IC, and semiconductor. The XMC4402F64F256BAXQMA1 provides 256 kByte of flash for program storage and 80 kByte of SRAM for working memory. Its processor operates at up to 120 MHz, while the high-resolution PWM unit offers 150 ps resolution for precision timing and motor-control tasks. Integrated 10/100 Ethernet support reduces the component count required for network-connected industrial equipment. The Arm Cortex-M4 architecture supports efficient real-time control while retaining a broad embedded software ecosystem. Peripheral resources such as high-resolution PWM, communication interfaces, and Ethernet position the device for motor control, industrial networking, automation controllers, and connected embedded systems. The 150 ps PWM resolution is particularly useful when the application depends on accurate edge positioning rather than only a conventional timer period. Typical uses include EtherCAT or Ethernet-based factory automation equipment, servo and motor-control systems, industrial communication gateways, programmable logic controllers, and networked sensor-control modules. For designs requiring a 3.3 V operating rail, the device can support a compact controller architecture while combining local real-time processing with Ethernet connectivity. Designers should follow the manufacturer’s pin, power, decoupling, clock, and exposed-pad guidance when laying out the PG-LQFP-100-25 package. The exposed thermal pad requires a properly designed land pattern and thermal-via arrangement if heat must be removed from the device. Firmware should also validate the selected clock, Ethernet physical interface, and peripheral pin multiplexing before production release. This product record combines the manufacturer’s XMC4402-F64F256-BA characteristics with orderable MPN context, useful application guidance, and explicit design cautions. It helps engineers distinguish confirmed memory, connectivity, package, and timing attributes from details that must be checked in the manufacturer datasheet before schematic or PCB signoff.

Devis Contact
XMC4402F64K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F64K256ABXQSA1

XMC4402F64K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4402F64K256ABXQSA1 is a 32-bit single-core Arm Cortex-M4 microcontroller operating at 120 MHz, with 256 KB of programmable Flash memory and a 64-pin PG-LQFP-19 package with exposed pad. It belongs to the XMC4000 industrial microcontroller family and includes an Ethernet MAC rated for 10/100 communication. The 256K × 8 Flash organization provides dedicated code and data storage for connected industrial-control equipment. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor based on the Armv7-E architecture. Microcontrollers integrate a processor core, Flash memory, SRAM, interrupt control, timers, communication peripherals, and general-purpose I/O into one device. Within the semiconductor hierarchy, this MCU belongs to the embedded-microcontroller category and provides a compact platform for industrial automation, networking, motor control, and real-time control systems. The principal device characteristics visible in manufacturer and distributor records include a 120 MHz Cortex-M4 core, 256 KB Flash memory, 32-bit architecture, single-core operation, and a 64-pin LQFP package. The Ethernet capability makes the device suitable for connecting embedded equipment to 10/100 networks. Its package also includes an exposed thermal pad intended to improve heat transfer from the device to the PCB. The XMC4000 architecture combines real-time control capability with Ethernet connectivity. A 120 MHz Cortex-M4 core can execute control logic and communication tasks, while integrated peripherals reduce the need for discrete interface components. Designers should consult the XMC4402 datasheet and device pin-description tables for the exact peripheral mix, RAM configuration, I/O assignments, electrical limits, clock requirements, and package dimensions before finalizing a PCB. Typical uses include industrial Ethernet controllers, factory automation nodes, building automation equipment, networked sensors, motor-control systems, and communications gateways. These applications benefit from the combination of embedded Flash, a high-frequency 32-bit core, and 10/100 Ethernet MAC support. Exact protocol availability and performance should be confirmed against the selected order code and its manufacturer documentation. PCB implementation requires careful decoupling, a correctly configured clock network, and unobstructed thermal coupling to the exposed pad. Follow the manufacturer reference layout, place required capacitors close to their supply pins, route high-speed signals according to the recommended guidelines, and verify the assembled design across voltage and temperature limits. This page combines manufacturer identification, distributor specifications, strict package-aware substitution guidance, application analysis, and practical design notes. It is intended to help engineers evaluate the XMC4402F64K256ABXQSA1 for an existing 64-LQFP industrial design before obtaining detailed electrical and pin-level documentation.

Devis Contact
XMC4402F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F64K256BAXQMA1

XMC4402F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4402F64K256BAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz core, 256 KB of flash memory, and a 64-pin LQFP package. The XMC4000-series device combines real-time control capability with an integrated 10/100 Ethernet MAC, high-resolution PWM, and an extended peripheral set for industrial automation, networking, motor-control, and embedded communications systems. A microcontroller is a compact semiconductor system that integrates a CPU core, program memory, data memory, peripherals, and communication interfaces on one package. The ARM Cortex-M4 architecture belongs to the microcontroller class and provides deterministic instruction execution, DSP-oriented instructions, and hardware floating-point support. The XMC4400 family extends this foundation with Infineon peripherals designed for industrial real-time control and connected equipment. The XMC4402F64K256BAXQMA1 operates at 120 MHz and provides 256 KB of flash organized as 256K x 8. Its high-resolution PWM unit offers a stated resolution of 150 ps, supporting precise timing-sensitive power conversion and motor-control systems. The integrated Ethernet MAC adds 10/100 communications capability without requiring a separate interface controller. The device is identified as an industrial-grade member of the XMC4400 family. The XMC4400 architecture integrates multiple peripheral domains suited to deterministic embedded control. Its communication and timing resources can support industrial Ethernet, while the high-resolution PWM and fast-control peripherals reduce reliance on software timing loops. The 256 KB embedded flash provides room for bootloader, application, and configuration code, while the Cortex-M4 processor supports efficient signal-processing and control workloads. Typical uses include industrial PLC peripheral modules, factory automation controllers, Ethernet-connected data acquisition equipment, variable-frequency motor drives, power-conversion controllers, building automation nodes, and real-time communication gateways. For designs requiring a deterministic Ethernet connection, the integrated 10/100 Ethernet MAC can be paired with a suitable Ethernet transceiver and magnetic interface. Designers should verify the complete pin-level electrical configuration, exposed-pad connection, clock requirements, memory organization, and peripheral multiplexing against the official Infineon documentation before layout release. The LQFP-64 land pattern must follow the manufacturer package drawing, and decoupling should be placed close to the supply pins. Firmware should also validate reset, clock, Ethernet PHY, and startup sequencing for the selected board design. This page combines verified manufacturer and distributor information with an honest engineering comparison, practical integration guidance, and clearly identified data gaps. It distinguishes confirmed XMC4400-family capabilities from unverified details so procurement and hardware teams can evaluate the MCU without relying on invented specifications or unsafe replacement assumptions.

Devis Contact
XMC4500-F144F1024AB - 120MHz Cortex-M4 MCU | Infineon
XMC4500-F144F1024AB

XMC4500-F144F1024AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500-F144F1024AB is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at 120 MHz with 1 MB of flash memory and 160 kByte of SRAM. The device is packaged in a 144-pin PG-LQFP-18 industrial package and is intended for connected industrial control, industrial Ethernet, power conversion, and sense-and-control systems. Its combination of Ethernet connectivity, configurable peripherals, and deterministic microcontroller processing supports compact embedded platforms that need communications and control in one device. An ARM Cortex-M4 microcontroller is a reduced-instruction-set processor-based embedded controller used for real-time control, communications, and signal-processing tasks. The XMC4000 family combines a standard ARM processor core with Infineon peripherals for industrial connectivity, control, and power-management designs. This makes the XMC4500 suitable when a system needs more than a basic GPIO controller, especially where Ethernet and deterministic control must share one microcontroller platform. The verified product information identifies a 120 MHz operating frequency, 1 MB flash, 160 kByte SRAM, Ethernet connectivity, and a 144-pin PG-LQFP-18 package. The family description also identifies configurable peripherals, allowing application-specific tailoring. The 1 MB flash provides room for networking stacks, control software, diagnostics, and application logic, while the 160 kByte SRAM supports working memory for protocol and control tasks. The XMC4500 is positioned for industrial communication and control applications where an Ethernet-capable MCU can reduce component count by integrating network communication with local control. The Cortex-M4 architecture provides a familiar embedded software ecosystem, while the family peripheral set is designed for industrial connectivity, power conversion, and sense-and-control use cases. Exact electrical limits, pin functions, timing values, and temperature limits require the Infineon XMC4500 datasheet. Typical applications include industrial Ethernet gateways, programmable automation controllers, motor and power-conversion control, industrial sensor nodes, and connected measurement equipment. For designs requiring deterministic response, the MCU can process local control loops while Ethernet handles supervisory communication, diagnostics, and configuration. The verified data does not provide a complete application-specific peripheral map for this exact orderable MPN, so firmware engineers should verify pin multiplexing and peripheral availability in the manufacturer datasheet before schematic capture. A key design consideration is package and firmware verification. The target is a 144-pin industrial package, so PCB land patterns, exposed-pad or thermal requirements, pin multiplexing, clock configuration, and power sequencing must be checked against the exact datasheet. This page synthesizes the verified manufacturer and distributor information, available cross-reference results, package identity, application context, and engineering guidance; missing orderable-specific data is explicitly marked rather than estimated. The Infineon XMC4500-F144F1024AB is a 120 MHz ARM Cortex-M4 industrial microcontroller with Ethernet, 1 MB flash, 160 kByte SRAM, and a 144-pin PG-LQFP-18 package.

Devis Contact
XMC4500-F144K1024 - 120MHz Cortex-M4 1MB Flash MCU | Infineon
XMC4500-F144K1024

XMC4500-F144K1024 - 120MHz Cortex-M4 1MB Flash MCU | Infineon

The Infineon XMC4500-F144K1024 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 series, combining a 120 MHz processor core with 1024 kByte of embedded flash and 160 kByte of SRAM in a 144-pin PG-LQFP package. Industrial connectivity microcontrollers such as the XMC4500 sit between general-purpose embedded processors and highly specialized control devices. They combine an Arm Cortex-M4 instruction set with configurable peripherals for communications, timing, analog conversion, and industrial control, allowing one controller to supervise power conversion, sensing, fieldbus communication, and safety-related monitoring functions. The XMC4500 integrates Ethernet connectivity alongside the XMC4000 peripheral family, and its 1024 kByte of flash supports larger protocol stacks, application firmware, and field-upgrade capability than smaller 32-bit microcontrollers. The 160 kByte of SRAM provides working memory for packet buffers, control loops, and communication tasks. The 144-pin PG-LQFP-18 package provides a substantial peripheral count and power-management connectivity for industrial control boards. According to the manufacturer datasheet, the XMC4500 series targets industrial connectivity, industrial control, power conversion, and sense-and-control systems. Its configurable peripheral set allows designers to tailor the controller to application requirements instead of relying on a fixed combination of unused functions. The 120 MHz Cortex-M4 core and integrated Ethernet interface make the device suitable for connected motor controllers, power-conversion equipment, and industrial automation gateways. Designers should pay attention to the exact ordering suffix, flash density, package type, and temperature-grade requirements when comparing XMC4500 variants. The verified distributor listings identify the related -AC, -AB, and -AA order codes, while the manufacturer documentation provides the authoritative electrical and ordering details. For the target suffix, confirm the package pin count, exposed-pad connections, and production availability before layout release. This page consolidates manufacturer datasheet links, distributor records, package information, and practical selection guidance for the XMC4500-F144K1024. It highlights where related XMC4500 order codes are useful references and where a PCB redesign is required, helping engineers evaluate drop-in replacement risk before committing a new design.

Devis Contact
XMC4500E144F1024ACXQSA1 120MHz Cortex-M4 1MB MCU
XMC4500E144F1024ACXQSA1

XMC4500E144F1024ACXQSA1 120MHz Cortex-M4 1MB MCU

Infineon Technologies XMC4500E144F1024ACXQSA1 is an industrial ARM Cortex-M4 microcontroller with a 120 MHz CPU, 1 MB of flash memory, and 160 KB of SRAM in a 144-pin LFBGA-144-10 package. The device belongs to the XMC4000 family and is designed for embedded industrial applications requiring real-time control, Ethernet connectivity, and a broad peripheral set. It operates from a 3.3 V supply according to distributor and manufacturer product information, with an industrial temperature rating of -40 °C to +85 °C. The XMC4500 combines an ARM Cortex-M4 processor core with Infineon’s configurable peripheral set. This architecture places a general-purpose microcontroller, memory, communication interfaces, timing resources, and analog or digital peripherals into one device. The 120 MHz execution rate supports demanding control loops and connected industrial equipment, while the 1 MB program-memory capacity allows more application code, configuration data, and protocol stacks to be stored locally. Key characteristics include 32-bit ARM Cortex-M4 operation at 120 MHz, 1 MB of flash, 160 KB of SRAM, an Ethernet MAC, and a 144-pin LFBGA-144-10 package. The large pin count provides access to the family’s communication, general-purpose I/O, analog, and timing functions. The industrial temperature range makes the device suitable for factory equipment, embedded controllers, communication modules, and connected automation systems. The device is identified by the Infineon ordering code XMC4500E144F1024ACXQSA1. The XMC4500-E144X1024-AC manufacturer product designation identifies the underlying industrial MCU configuration, while the full ordering suffix identifies the package, temperature, and shipment variant. This distinction matters when comparing distributor records because some listings abbreviate or omit the complete orderable suffix. XMC4500 controllers are intended for applications where deterministic embedded control and industrial communications are more important than minimizing pin count or package area. The Ethernet MAC enables network-connected equipment, while the Cortex-M4 core supports control software, communication stacks, and supervisory functions. A 144-pin LFBGA also requires careful PCB layout with adequate escape routing, power distribution, and thermal design. For new designs, use the manufacturer datasheet and product-page ordering information to confirm the exact pin assignment, supported peripherals, electrical limits, and package dimensions. The XMC4500E144F1024ACXQSA1 is a tray-packaged industrial MCU; procurement, stock, and lead-time questions should be directed through the XAIPART Request a Quote form. Engineering decisions should also account for the 3.3 V supply requirement, the 120 MHz operating point, the 144-ball land pattern, and the -40 °C to +85 °C environmental range.

Devis Contact
XMC4500E144X1024ACXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500E144X1024ACXQSA1

XMC4500E144X1024ACXQSA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4500E144X1024ACXQSA1 is a 32-bit Arm Cortex-M4 microcontroller rated at 120 MHz, with 1024 kByte of flash memory and an Ethernet MAC, in a 144-pin PG-LFBGA-144-10 package. The device belongs to the XMC4000 family and targets industrial embedded systems requiring high-performance control, communications, and configurable peripheral support. An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control. Positioned within the hierarchy of microcontroller, embedded processor, and semiconductor, it combines deterministic real-time execution with integrated memory, communications peripherals, and general-purpose I/O. The XMC4000 architecture is intended to provide a configurable peripheral set so equipment designers can tailor the device to application-specific industrial requirements. The principal features of the XMC4500E144X1024ACXQSA1 include a 120 MHz Cortex-M4 core, 1024 kByte of flash, an integrated Ethernet MAC, and a 144-pin LFBGA package. Its 1 MByte flash capacity provides substantial room for application code, configuration data, and protocol stacks. The Ethernet MAC supports designs requiring wired network connectivity without relying on an external network controller. The XMC4500 combines an industry-standard 32-bit Arm Cortex-M4 core with Infineon industrial peripherals. Its 120 MHz operating frequency supports responsive control loops and communication-intensive firmware. The family-level documentation describes a superset architecture, while the device-specific ordering information identifies the exact flash density, package, and qualification options. All grounds share a common ground potential, and the exposed die pad in applicable packages must connect to that common ground. Typical applications include industrial Ethernet equipment, factory automation controllers, programmable logic controllers, motor and motion-control systems, industrial communications gateways, and embedded data-acquisition equipment. The combination of 120 MHz processing performance, 1 MByte flash, and Ethernet MAC is particularly suitable for controllers that must execute control software and network protocols concurrently. For PCB implementation, follow the Infineon PG-LFBGA-144-10 package documentation for land patterns, ball assignments, routing, and exposed-pad connection. Pay particular attention to the common-ground requirement, high-speed Ethernet signal integrity, decoupling placement, and thermal management around the 144-ball land grid. Confirm the complete pin and ball assignments against the manufacturer package drawing before fabrication. This product overview combines the manufacturer ordering information, package identification, core and memory characteristics, and industrial application context into a design-oriented reference. It also identifies close same-family ordering options for engineers evaluating flash density and grade changes without overlooking the need to verify package-level compatibility.

Devis Contact