XMC4500-F144F1024AB - 120MHz Cortex-M4 MCU | Infineon
Référence : XMC4500-F144F1024AB ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
XMC4500-F144F1024AB Présentation
An ARM Cortex-M4 microcontroller is a reduced-instruction-set processor-based embedded controller used for real-time control, communications, and signal-processing tasks. The XMC4000 family combines a standard ARM processor core with Infineon peripherals for industrial connectivity, control, and power-management designs. This makes the XMC4500 suitable when a system needs more than a basic GPIO controller, especially where Ethernet and deterministic control must share one microcontroller platform.
The verified product information identifies a 120 MHz operating frequency, 1 MB flash, 160 kByte SRAM, Ethernet connectivity, and a 144-pin PG-LQFP-18 package. The family description also identifies configurable peripherals, allowing application-specific tailoring. The 1 MB flash provides room for networking stacks, control software, diagnostics, and application logic, while the 160 kByte SRAM supports working memory for protocol and control tasks.
The XMC4500 is positioned for industrial communication and control applications where an Ethernet-capable MCU can reduce component count by integrating network communication with local control. The Cortex-M4 architecture provides a familiar embedded software ecosystem, while the family peripheral set is designed for industrial connectivity, power conversion, and sense-and-control use cases. Exact electrical limits, pin functions, timing values, and temperature limits require the Infineon XMC4500 datasheet.
Typical applications include industrial Ethernet gateways, programmable automation controllers, motor and power-conversion control, industrial sensor nodes, and connected measurement equipment. For designs requiring deterministic response, the MCU can process local control loops while Ethernet handles supervisory communication, diagnostics, and configuration. The verified data does not provide a complete application-specific peripheral map for this exact orderable MPN, so firmware engineers should verify pin multiplexing and peripheral availability in the manufacturer datasheet before schematic capture.
A key design consideration is package and firmware verification. The target is a 144-pin industrial package, so PCB land patterns, exposed-pad or thermal requirements, pin multiplexing, clock configuration, and power sequencing must be checked against the exact datasheet. This page synthesizes the verified manufacturer and distributor information, available cross-reference results, package identity, application context, and engineering guidance; missing orderable-specific data is explicitly marked rather than estimated.
The Infineon XMC4500-F144F1024AB is a 120 MHz ARM Cortex-M4 industrial microcontroller with Ethernet, 1 MB flash, 160 kByte SRAM, and a 144-pin PG-LQFP-18 package.
Alternatives de remplacement direct pour XMC4500-F144F1024AB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
XMC4500-F144F1024-AC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XMC4500-F144K1024-AC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XMC4500-F144K1024-AB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XMC4500-F144F1024-AA
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XMC4500-F144K1024-AC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XMC4500-F144F1024AB Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | ARM Cortex-M4 |
| CPU Frequency | 120 MHz |
| Flash Memory | 1 MB |
| SRAM | 160 kByte |
| Connectivity | Ethernet |
| Series | XMC4000 family |
| Boîtier | PG-LQFP-144-18 |
| Package Pin Count | 144 pins |
| Architecture | 32-bit |
| Application Positioning | Industrial connectivity, industrial control, power conversion, sense and control |
| Peripheral Configuration | Configurable peripheral set |
| Program Memory Organization | 1M x 8 flash organization |
| Type de montage | Surface mount |
| Manufacturer | Infineon Technologies |
Guide de configuration des broches du XMC4500-F144F1024AB 144 pins
Configuration des broches du XMC4500-F144F1024AB (boîtier 144 pins). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XMC4500-F144F1024AB.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XMC4500-F144F1024AB convient pour 6 applications: Industrial Ethernet Gateway, Programmable Automation Controller, Power Conversion Control, Connected Sensor Node, Motor and Drive Control, Industrial Data Acquisition System.
Industrial Ethernet Gateway
The XMC4500-F144F1024AB fits an industrial Ethernet gateway because the verified device combines an ARM Cortex-M4 core, Ethernet connectivity, 120 MHz processing, 1 MB flash, and 160 kByte SRAM in one microcontroller. It can host protocol handling, local control, diagnostics, and configuration logic while an external Ethernet PHY provides the physical network interface. The 1 MB flash is useful when the firmware must include networking, monitoring, and update features, while the SRAM supports runtime protocol buffers and control state. The designer must still verify the exact Ethernet peripheral resources, PHY interface, pin multiplexing, clocking, and power requirements in the Infineon datasheet before layout release.
Recommandé
Programmable Automation Controller
The XMC4500-F144F1024AB is suitable for a programmable automation controller because its 120 MHz ARM Cortex-M4 core can execute control logic while the 1 MB flash stores application code and the 160 kByte SRAM supports working state. Ethernet can connect the controller to supervisory systems, while configurable peripherals allow the design to tailor sensing and control resources. A practical implementation uses the MCU for sequencing, alarm handling, data logging, and communication, with external sensors and actuators connected through appropriate interface circuits. Exact I/O counts, timer functions, analog features, voltage levels, and timing guarantees must be confirmed for the exact orderable part in the manufacturer datasheet.
Recommandé
Power Conversion Control
The XMC4500-F144F1024AB can serve as the supervisory controller in a power-conversion system because the XMC4000 family is explicitly positioned for power conversion and the MCU provides 120 MHz processing with 1 MB flash. The controller can execute state-machine logic, monitor protection signals, coordinate actuators, and communicate operating data over Ethernet. Power-stage timing and safety-critical protection should remain independent of general-purpose firmware, and the MCU must be isolated from high-energy switching paths through suitable gate drivers, sensing, and protection components. The verified data does not specify the exact PWM, ADC, timer, or safety functions available for this suffix, so those resources must be verified before using it in a converter design.
Recommandé
Connected Sensor Node
The XMC4500-F144F1024AB fits a connected industrial sensor node because it combines Ethernet, 120 MHz processing, 1 MB flash, and 160 kByte SRAM in a single controller. The MCU can acquire sensor data, apply filtering or calibration, run local thresholds, and publish measurements to a supervisory network. Ethernet connectivity can reduce the need for a separate communications processor, while the larger code and memory budget supports diagnostics and field-update functions. Designers should account for sensor interface voltage levels, isolation requirements, sampling timing, and network-termination implementation. The verified sources do not provide a complete analog input specification for the exact MPN, so sensor selection must be checked against the detailed datasheet.
Recommandé
Motor and Drive Control
The XMC4500-F144F1024AB is applicable to connected motor-control and drive-support functions where a 120 MHz MCU can coordinate sequencing, diagnostics, communications, and supervisory control. Ethernet allows the drive to report status and receive configuration data, while the configurable peripheral set may support the timing and sensing resources required by the family’s industrial-control positioning. A practical design would use external power electronics, gate drivers, current and position sensors, and protection circuits rather than relying on the microcontroller for high-energy switching. Exact timer channels, capture functions, encoder interfaces, analog channels, and electrical ratings are not provided in the verified excerpts and must be checked before selecting the exact suffix.
Recommandé
Industrial Data Acquisition System
The XMC4500-F144F1024AB can support industrial data-acquisition equipment when measurements must be processed locally and delivered over Ethernet. Its 120 MHz ARM Cortex-M4 core provides compute capacity for control, statistics, and communication tasks, while 1 MB flash and 160 kByte SRAM provide storage for firmware, configuration, buffers, and diagnostic records. The configurable peripheral set makes the device appropriate for applications combining sensed process variables with control outputs and network monitoring. Before implementation, verify converter performance, input protection, isolation, grounding, sampling channels, and timing from the exact datasheet. The verified data supports the MCU positioning but does not justify unverified converter or environmental claims.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XMC4500-F144F1024AB — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XMC4500-F144F1024-AC | XMC4500-F144K1024-AC | XMC4500-F144K1024-AB | XMC4500-F144F1024-AA | XMC4500-F144K1024-AC |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
Principaux différenciateurs
- Integrated Ethernet connectivity (vs XMC4500-F144F1024-AC)
- 120 MHz ARM Cortex-M4 processing (vs XMC4500-F144K1024-AB)
- 1 MB flash and 160 kByte SRAM resource pairing (vs XMC4500-F144F1024-AA)
- 144-pin industrial package positioning (vs XMC4500-F144K1024-AC)
Notes de conception
Use the exact Infineon PG-LQFP-144-18 land pattern and pin-1 orientation from the manufacturer package drawing. Place decoupling capacitors close to the device power pins and preserve the recommended return path for every supply connection. Because the verified data does not provide the complete pin map or recommended PCB stack-up, do not finalize a footprint or thermal-via pattern from distributor metadata alone; cross-check the package drawing and layout guidance before fabrication.
The XMC4500-F144F1024AB is intended for embedded industrial control, so the power tree must account for core, I/O, analog, and Ethernet-related requirements. The retrieved data confirms 120 MHz operation but does not provide voltage ranges or current limits. Verify every supply rail, sequencing condition, ground reference, and external Ethernet PHY power requirement in the official datasheet before selecting regulators or placing bulk and bypass capacitance.
Separate Ethernet signal routing from sensitive analog or timing paths as far as the package and board area allow. The MCU's 120 MHz processing and configurable peripherals can make signal-integrity and clock-routing discipline important, even though the verified web data does not state rise-time or EMI limits. Follow the Infineon reference-manual and application guidance for clock, reset, debug, communications, and exposed-pad routing, then validate the completed design with signal-integrity and EMC testing.
Do not substitute a related XMC4500 suffix solely because the product title contains the same family and memory size. The verified search results do not establish identical pinout, electrical ratings, qualification, or lifecycle status for XMC4500-F144F1024-AC, XMC4500-F144K1024-AC, XMC4500-F144K1024-AB, or XMC4500-F144F1024-AA. Treat these as related candidates only, compare the official ordering tables, and perform schematic, PCB, firmware, and qualification review before substitution.
Informations de conformité
The supplied verified results identify an industrial microcontroller but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Obtain current manufacturer documentation before making compliance or automotive claims.
