Produits (44 000+)

ICS308R - 200 MHz Quad PLL VersaClock | Integrated Device Technology
ICS308R

ICS308R - 200 MHz Quad PLL VersaClock | Integrated Device Technology

The Renesas Electronics ICS308R is a serially programmable quad-PLL VersaClock synthesizer with a 250 kHz to 200 MHz output-frequency range and support for up to six simultaneous output frequencies. It is packaged in a 20-pin SSOP surface-mount package and operates from a 3 V to 3.6 V supply. A PLL clock synthesizer, also called a frequency synthesizer, generates or distributes multiple clock signals from one or more reference inputs. The ICS308R belongs to the clock-generator and timing-control hierarchy, where accurate frequency generation is used to synchronize digital processors, communications links, converters, and test equipment. The principal verified features are four PLL functions, serial programmability, on-the-fly output reprogramming, and as many as six independent output frequencies. These characteristics make the device useful when a system needs flexible clock-tree generation rather than one fixed oscillator. The 200 MHz maximum output makes it suitable for high-speed digital timing domains, while the 250 kHz lower limit supports slower control and interface clocks. The ICS308R is identified as a clock or frequency synthesizer IC with one input-side reference arrangement and multiple programmable outputs. Its frequency generation is controlled through a serial programming interface, allowing the system to adjust operating frequencies as operating modes change. The exact output count, programming levels, reference frequency, jitter, and propagation characteristics are not present in the supplied search data and should be confirmed from the manufacturer datasheet before final design release. Typical applications include communications infrastructure, networking equipment, industrial automation, test and measurement systems, embedded processors, and mixed-signal products requiring several related clock domains. The SSOP-20 package supports conventional surface-mount assembly, but its narrow pitch requires careful PCB layout and reliable land-pattern construction. When designing around the ICS308R, preserve the specified power-supply range, connect decoupling capacitors near the supply pins, and validate every programming sequence against the manufacturer timing requirements. Output frequency accuracy and clock-jitter performance depend on the reference source, loop configuration, output loading, and board implementation; these values are not stated in the supplied excerpts and are marked for verification.

Devis Contact
ICS308RI - 200MHz Quad-PLL Clock Synthesizer | Renesas
ICS308RI

ICS308RI - 200MHz Quad-PLL Clock Synthesizer | Renesas

The Renesas Electronics ICS308RI is a serial-programmable quad-PLL VersaClock synthesizer with an output frequency range from 250 kHz to 200 MHz. It can generate six different output frequencies simultaneously and is housed in a 20-pin SSOP package measuring 3.90 mm wide. The device combines four phase-locked loops with serial configuration, allowing a host processor to program multiple related clocks within one integrated circuit. A PLL clock synthesizer is a clock-and-timing semiconductor that generates, divides, multiplies, and phases a reference clock to produce one or more stable output frequencies. The quad-PLL architecture expands this role into a multi-output clock-generation hub. In system terms, the ICS308RI belongs to the PLL synthesizer family, clock-generation ICs, clock-and-timing ICs, and the broader integrated-circuit and semiconductor hierarchy. The principal feature is simultaneous generation of up to six output frequencies across a 250 kHz to 200 MHz range. Serial programmability allows system designers to configure divider ratios and output relationships instead of relying on a fixed-frequency oscillator. This makes the ICS308RI useful when several clock domains require independent or related rates while sharing one reference source. Its four internal PLL channels provide more configuration flexibility than a basic single-output clock generator. The ICS308RI is specified as a clock/frequency synthesizer IC with a maximum frequency of 200 MHz. The manufacturer documentation identifies the device as a serial-programmable quad-PLL VersaClock synthesizer, which describes both its programming interface and its four-PLL architecture. Its 20-pin SSOP package supports surface-mount PCB assembly and preserves a relatively compact board footprint for multi-clock systems. Typical applications include communications equipment, networking infrastructure, industrial control systems, data-conversion equipment, and embedded systems that need several internally related clock outputs. A single reference clock can be multiplied and divided to support multiple converters, processors, or interface blocks. The ability to produce six frequencies simultaneously can simplify clock-tree design and reduce the number of separate synthesis devices required on a board. When integrating the ICS308RI, verify the reference-clock range, supply requirements, programming interface, output-drive characteristics, and output-frequency limits against the manufacturer datasheet before finalizing the PCB. Preserve short, controlled traces around the clock inputs and outputs, provide the required bypass capacitors, and account for output jitter when routing sensitive clock signals. This page organizes the ICS308RI core specifications, application guidance, pin-package information, and drop-in replacement information into a design-focused resource for engineers evaluating programmable clock-generation architectures.

Devis Contact
ICS308RT - 200MHz Quad PLL Clock Synthesizer | Renesas
ICS308RT

ICS308RT - 200MHz Quad PLL Clock Synthesizer | Renesas

Renesas Electronics ICS308RT is a serial-programmable quad-PLL VersaClock synthesizer capable of generating output frequencies from 250 kHz to 200 MHz and providing six different output frequencies simultaneously. The device combines four phase-locked loops with a serial programming interface, allowing a host controller to configure multiple clock outputs for a complex electronic system. It is positioned as a clock and timing IC within the broader clock-generator, frequency-synthesizer, PLL, and semiconductor hierarchy. A phase-locked loop, or PLL, is a feedback-controlled clock-generation circuit that compares an output signal with a reference and adjusts a controlled oscillator until the phase and frequency relationship is maintained. A multi-PLL clock synthesizer extends this principle by deriving several related or independent clock outputs from one programmed device. The ICS308RT therefore serves as a central timing component for systems requiring more clock domains than a single-output oscillator can economically provide. The principal feature of the ICS308RT is its six simultaneous outputs, each of which can be assigned a different frequency within the stated 250 kHz to 200 MHz operating range. This output count allows one synthesizer to support multiple domains such as processor clocks, communication interfaces, memory timing, converters, or signal-processing chains. Serial programmability also simplifies configuration by allowing the system controller to set the clock plan instead of relying on a large collection of discrete oscillators. The quad-PLL architecture provides the timing foundation for six independently usable output frequencies, while the wide 200 MHz upper limit accommodates high-speed digital, communications, and control systems. Its 250 kHz lower range supports low-frequency timing and divided-clock requirements. Because all outputs are derived from one programmable package, the synthesizer can simplify clock-tree organization compared with multiple discrete crystal oscillators and dividers. Typical applications include FPGA and processor clock trees, industrial control systems, communications equipment, audio and video processing, instrumentation, and multi-clock test systems. It is particularly useful when several buses or subsystems require synchronized clocks with different output rates. The six-output architecture can reduce component count and centralize clock configuration, although the final design must account for output jitter, reference quality, supply requirements, and channel-specific frequency limits. When laying out a circuit using the ICS308RT, begin with the manufacturer pin-description and layout guidance in the datasheet. Preserve short, controlled-length clock routes, provide the required reference and decoupling connections, and validate every output frequency against the relevant PLL and output limits. Configuration should be tested with the intended reference clock because programming values, loop behavior, and board-level clock integrity determine the final frequency accuracy and phase-noise performance. This page combines the device architecture, frequency capability, application guidance, package considerations, and verified cross-reference information in a form that supports component selection and engineering review. It also distinguishes documented operating facts from parameters that require confirmation from the full manufacturer datasheet before a production layout or replacement is approved.

Devis Contact
ICS309R - 200MHz Triple-PLL Clock Synthesizer | Renesas
ICS309R

ICS309R - 200MHz Triple-PLL Clock Synthesizer | Renesas

The Renesas Electronics ICS309R is a serially programmable triple-PLL spread-spectrum VersaClock synthesizer with a maximum output frequency of 200 MHz, supplied in a 20-pin SSOP package. Its verified electrical attributes include LVCMOS outputs, clock or crystal inputs, PLL bypass capability, a 1:9 input-to-output ratio, and a 3.0 V to 3.6 V supply range. A clock synthesizer generates or distributes one or more related clock signals for digital systems. This ICS309R belongs to the PLL-based clock generator hierarchy: it compares a reference clock with an internal phase-locked loop and then divides or multiplies that reference to produce programmable outputs. Spread-spectrum clocking reduces the concentration of clock energy at one frequency, while serial programming permits controlled configuration by an embedded controller. The strongest verified features of ICS309R are its triple-PLL architecture, serial programmability, spread-spectrum operation, 200 MHz maximum frequency, LVCMOS output type, and support for both clock and crystal reference sources. The bypass function can be useful when a system must pass through or test a clock source without normal PLL operation. The 20-pin surface-mount SSOP supports compact clock-generation layouts. The supplied snippets do not disclose the complete PLL configuration ranges, individual output-channel assignments, jitter specifications, serial interface levels, or output-drive details. Engineers should therefore treat ICS309R as a 200 MHz-class, 3.3 V clock synthesizer and verify every timing and signal-integrity requirement against the manufacturer datasheet before releasing a new design. Some retrieved summaries appear to mix ICS309R with the closely related ICS308, so this distinction is important. Typical uses include processor and controller clock generation, communications equipment, storage systems, test and measurement instruments, and embedded systems that require programmable frequency generation or spread-spectrum clocking. In each case, the reference clock, target output frequency, loop filter, serial programming sequence, and downstream load must be validated together. PCB implementation should preserve short, controlled-impedance clock paths and provide clean return paths beneath the device. Keep programming signals away from sensitive clock nets, observe all bypass-capacitor recommendations in the datasheet, and confirm output rise and fall times at the actual receiver. Do not infer pin function or output assignment from the family-level product description alone. This page consolidates the verified distributor and datasheet-index information available for ICS309R, separates confirmed facts from missing data, and provides replacement, selection, and design guidance that is not presented as a manufacturer datasheet replacement.

Devis Contact
ICS309RI - 200 MHz Triple-PLL Spread-Spectrum Clock | Renesas
ICS309RI

ICS309RI - 200 MHz Triple-PLL Spread-Spectrum Clock | Renesas

The Renesas ICS309RI is a serial-programmable triple-PLL spread-spectrum clock synthesizer with a maximum operating frequency of 200 MHz, LVCMOS outputs, and clock or crystal input support. It is packaged in a QSOP-20 package and is designed for systems that require programmable frequency generation, clock distribution, and spread-spectrum clocking. The ICS309RI includes PLL bypass functionality and supports input-to-output multiplication ratios described in the device documentation. A programmable clock synthesizer is used to generate one or more stable digital clock outputs from a reference clock or crystal. By dividing or multiplying the reference frequency through internal phase-locked loops, the circuit allows system designers to reconcile multiple clock domains and reduce clock-related electromagnetic interference. Spread-spectrum operation further changes the emitted clock frequency over time, reducing narrowband emissions and improving compatibility with sensitive downstream equipment. The ICS309RI uses serial programming to configure its clock-generation functions, allowing a host controller to set operating parameters during initialization. The presence of LVCMOS outputs makes it suitable for digital logic requiring conventional single-ended clock signaling. Its maximum frequency of 200 MHz provides ample headroom for communications, networking, storage, embedded computing, and industrial control systems that distribute clocks to processors, transceivers, and peripheral controllers. The triple-PLL architecture is useful when one reference source must support several related output frequencies. PLL bypass allows the device to pass through a clock when a direct path is appropriate, helping designers simplify control sequences and support different operating modes. The QSOP-20 package supports compact surface-mount construction while providing the pin count needed for programming, reference, and clock outputs. When designing around the ICS309RI, begin with the manufacturer pin-description and application-information sections to assign programming pins, reference inputs, and outputs correctly. Confirm the selected reference frequency, output ratio, output enable sequence, and bypass state in software before enabling downstream clocks. Keep clock traces short, provide continuous return paths, and account for output-enable timing when multiple loads must start in a defined sequence. This product page combines the device’s documented architectural features with practical guidance for clock-tree integration, programming, and EMI-conscious implementation. It is intended to help engineers distinguish the ICS309RI from ordinary fixed-frequency clock generators and to evaluate whether its programmable triple-PLL architecture matches the requirements of a new board design.

Devis Contact
ICS309RT - 200MHz Triple-PLL Clock Synthesizer | Renesas
ICS309RT

ICS309RT - 200MHz Triple-PLL Clock Synthesizer | Renesas

Renesas Electronics ICS309RT is a serially programmable triple-PLL spread-spectrum clock synthesizer with a maximum output frequency of 200 MHz, supplied in a 20-pin SSOP surface-mount package. The device accepts a clock or crystal input, provides LVCMOS outputs, supports PLL bypass, and can produce up to six different output frequencies simultaneously. Its specified operating supply range is 3 V to 3.6 V. A clock synthesizer is an integrated timing device that generates or distributes multiple related clock frequencies from a common reference. It belongs to the clock and timing IC hierarchy, where PLLs multiply and divide a reference frequency to establish programmable output clocks. The ICS309 combines that function with serial programming and spread-spectrum clock generation, allowing system designers to control frequency relationships and reduce clock-related electromagnetic interference without redesigning the PCB. The principal feature of ICS309RT is its triple-PLL architecture. According to the manufacturer device description, ICS309RT can generate any output frequency from 250 kHz to 200 MHz and supports up to six simultaneous output frequencies. This range permits one timing device to replace multiple separate oscillators or dividers in communications, storage, computing, and test systems. Serial programmability also simplifies configuration and supports applications where several clocks must be coordinated under software control. The ICS309RT supports both clock and crystal inputs. This allows it to operate from an externally generated reference or from a crystal oscillator arrangement when an independent frequency reference is required. Its PLL bypass feature provides a path for evaluating clock behavior without modulation, while its spread-spectrum capability is intended to spread clock energy across a frequency band and reduce peak electromagnetic emissions. LVCMOS output signaling is suitable for common digital clocking environments operating from the device's 3 V to 3.6 V supply range. Typical uses include processor and peripheral clock distribution, data-conversion clocking, communications equipment, storage controllers, networking hardware, and embedded systems that require several frequency outputs. The six-output capability is especially useful when a design needs related clocks for a controller, serial interface, memory, and data converter without allocating a separate oscillator to each load. The primary design consideration is configuration and output planning. Engineers should use the manufacturer datasheet's pin-description, register, and application tables to confirm every pin function, programming sequence, output format, and reference-clock requirement before layout. Because the clock-generation architecture includes PLL and spread-spectrum functions, signal routing, grounding, and output loading should follow the manufacturer's recommended reference layout rather than relying on general-purpose clocking assumptions. This product page consolidates the verified frequency, PLL, I/O, supply, and package characteristics into an engineering-focused reference. It also distinguishes verified device functions from parameters that still require confirmation from the complete manufacturer datasheet, helping designers plan replacements and PCB reuse without assuming unsupported compatibility.

Devis Contact
ICS341MP - 200MHz Spread Spectrum Clock Synth | Renesas
ICS341MP

ICS341MP - 200MHz Spread Spectrum Clock Synth | Renesas

The Renesas Electronics ICS341MP is a low-cost, single-output, field-programmable clock synthesizer with a maximum output frequency of 200 MHz and an LVCMOS output in an 8-pin SOIC package. It accepts a clock or crystal input, contains one PLL, and supports programmable output frequencies from 250 kHz to 200 MHz at a 1:1 input-to-output ratio. A field-programmable clock synthesizer is a clock-and-timing IC that generates a stable digital clock from an external reference. The ICS341 belongs to the broader PLL-based frequency synthesizer hierarchy, where the PLL multiplies or divides a reference frequency to create a programmable operating clock. Clock-and-timing ICs support digital systems requiring deterministic frequency generation, clock distribution, or reduced electromagnetic interference. The ICS341MP supports spread-spectrum clock generation to reduce system EMI by distributing clock energy over a range of frequencies. Its maximum frequency is 200 MHz, while its minimum programmable output is 250 kHz. A single LVCMOS output simplifies clock routing, and the integrated PLL allows the device to operate from a clock or crystal reference. These characteristics suit designs that need adjustable timing without a complex multi-output clock architecture. The ICS341MP is implemented in an 8-SOIC surface-mount package measuring 3.90 mm in body width. This package provides a practical upgrade over larger through-hole clock devices while remaining compatible with conventional PCB assembly. Its single-circuit architecture also keeps the signal path manageable, although applications requiring multiple independently programmable outputs would need a more capable clock generator. Typical uses include EMI-sensitive embedded systems, communications equipment, consumer electronics, and digital processing platforms where a programmable reference is useful. Spread-spectrum operation can help reduce narrowband emissions in systems that must meet internal or regulatory EMC goals. The 200 MHz ceiling supports common processor, interface, and control-clock requirements, while the 250 kHz lower limit accommodates lower-rate digital buses and control logic. Designers should verify the reference-input configuration, programmed frequency range, output enable behavior, and external crystal or clock requirements against the manufacturer datasheet before layout. Keep the reference and output paths short, provide the required decoupling capacitors close to the device, and confirm that the selected spread-spectrum range satisfies both timing margins and system EMC objectives. This page organizes the ICS341MP specifications, sourcing information, design guidance, and qualified drop-in options into one engineering-focused reference. It supports faster part selection while emphasizing the need to validate programming, reference, and EMC details against the manufacturer datasheet.

Devis Contact
ICS342MP - 200MHz Dual-Output Clock Synthesizer | Renesas
ICS342MP

ICS342MP - 200MHz Dual-Output Clock Synthesizer | Renesas

Renesas Electronics ICS342MP is a field-programmable, dual-output clock synthesizer with a maximum output frequency of 200 MHz, packaged in an 8-pin SOIC. The device accepts clock or crystal input and provides LVCMOS clock outputs through an integrated PLL architecture. Its specified 3.15 V to 3.45 V operating-supply range makes it suitable for low-voltage digital systems requiring locally generated, configurable timing signals. A clock synthesizer is a clock and timing IC that generates, divides, multiplies, or redistributes clock signals for digital logic. Clock generators and PLL-based synthesizers belong to the broader timing-control hierarchy that includes oscillators, clock buffers, dividers, and jitter-cleaning devices. Unlike a crystal oscillator, which primarily produces a fixed reference frequency, the ICS342MP uses programmable synthesis to produce multiple related output clocks and reduce the number of separate timing components in a system. The ICS342MP combines two configurable outputs with PLL support and a maximum frequency of 200 MHz. Its input section can operate from a clock or crystal, while its LVCMOS outputs are suited to digital logic that requires single-ended clock signals. The SOIC-8 surface-mount package also supports conventional PCB assembly and provides a compact option for communication, control, and embedded-system clock trees. Programmability allows the output frequencies to be selected through the device configuration interface instead of requiring a separate fixed-frequency oscillator for each clock domain. This can simplify board partitioning and provide a common timing reference for related circuits. The PLL architecture is useful when the system needs an output frequency derived from a common reference, although loop behavior, output jitter, and reference stability must be evaluated during clock-tree design. Typical uses include digital controller timing, industrial automation modules, embedded processor clock distribution, communications equipment, and general-purpose peripheral clocking. In these systems, two outputs can support related clock domains or distribute a master clock to two loads while keeping the design compact. The low-voltage supply requirement should be checked against the voltage and sequencing requirements of the logic being clocked. The main design consideration is preserving signal integrity between the synthesizer outputs and receiving logic. Keep clock traces short, provide a continuous ground reference, use appropriate termination when required, and observe the input and output timing limits in the manufacturer datasheet. Decoupling should be placed close to the supply pin, with the value and stability requirements taken directly from the recommended application circuit. This page consolidates the ICS342MP device identity, clock-synthesis specifications, package information, sourcing structure, and application-oriented design guidance. It also identifies the verified same-family replacement candidate and separates confirmed electrical attributes from parameters that require confirmation before schematic release or production qualification.

Devis Contact
ICS343MP - 200MHz Triple-Output Clock Synthesizer | Renesas
ICS343MP

ICS343MP - 200MHz Triple-Output Clock Synthesizer | Renesas

Renesas Electronics ICS343MP is a field-programmable, triple-output clock synthesizer based on the VersaClock architecture. It generates three independently programmable output clocks, reaches a maximum output frequency of 200 MHz, and accepts either a crystal or external clock input. The device is packaged in an 8-pin SOIC measuring 3.90 mm wide, making it suitable for compact communications, industrial control, test-and-measurement, and embedded timing systems. A clock synthesizer is a timing IC that accepts a reference frequency and uses one or more phase-locked loops to produce stable, independently configurable clock outputs. The ICS343 belongs to the clock generator and PLL hierarchy within the broader clock and timing IC category. Its three-output architecture can replace multiple discrete oscillators or divider networks when a board requires several related frequencies from one reference source. The ICS343MP provides three programmable outputs, PLL-based frequency synthesis, LVCMOS output signaling, and maximum frequency operation of 200 MHz. Separate output divide values from 2 through 20 allow the output clock banks to support widely different frequencies from the same reference. These features make the device useful where a system needs flexible clock partitioning without allocating a separate synthesizer for every rail. Its architecture supports low-cost field-programmable clock generation from a crystal or clock source. Independent output programming is particularly valuable in mixed-signal, communications, and data-conversion systems where the processor, serial interface, and peripheral blocks may not require the same frequency. The 8-SOIC package also offers a familiar surface-mount footprint for designs that must support external oscillators or frequency dividers. Typical applications include processor and interface clocking, communications modules, industrial automation equipment, test and measurement instrumentation, and embedded control systems. In each case, the synthesizer can centralize reference distribution while allowing output frequencies and divide ratios to be selected during configuration. The result is a smaller clock tree and potentially fewer discrete timing components. Designers should evaluate loop bandwidth, output jitter, supply requirements, and board-level noise using the manufacturer's application guidance before high-volume release. Reference-crystal layout, grounding, and output-routing practices are especially important in low-jitter systems. Because output-edge quality depends on the complete clock tree, PCB trace geometry and supply decoupling should be evaluated together with the programmed divider and PLL settings. This product page consolidates the device classification, functional characteristics, sourcing information, and engineering-oriented usage guidance. It also distinguishes the verified ICS343MP configuration from related suffix variants and identifies the limitations of the available replacement records, helping engineers make a more informed drop-in decision without treating broadly similar clock ICs as electrically interchangeable.

Devis Contact
ICS345RP - Triple PLL 200MHz Clock Synthesizer | Renesas
ICS345RP

ICS345RP - Triple PLL 200MHz Clock Synthesizer | Renesas

Renesas Electronics ICS345RP is a triple-PLL field-programmable clock synthesizer IC with a 200 MHz maximum clock frequency and up to nine high-quality, high-frequency clock outputs, including multiple reference clocks. The device is supplied in a 20-SSOP package with a 3.90 mm package width, making it suitable for compact embedded clock-generation designs where several independently derived clock signals are required. A field-programmable clock synthesizer is a clock and timing IC that uses one or more phase-locked loops to generate, divide, multiply, or otherwise derive multiple clock outputs from a reference source. In the broader semiconductor hierarchy, a PLL belongs to the clock and timing category and provides a flexible alternative to fitting separate oscillators and divider networks on a complex circuit board. The ICS345RP is positioned for systems that need multiple related clock domains while preserving a centralized programming and distribution architecture. The ICS345RP combines a triple-PLL architecture with field-programmable output generation. According to the Renesas datasheet result for the 345 family, the device can generate up to nine high-quality, high-frequency clock outputs and can derive those outputs from a low-frequency reference. The verified distributor listing identifies the ICS345RP as a clock/frequency synthesizer IC with a 200 MHz frequency rating and a single 20-SSOP configuration. This type of device is useful in communication equipment, industrial control systems, test and measurement instruments, embedded computing platforms, and other systems requiring multiple clocks with predictable relationships. A common design uses a stable reference source at the input and programmable divider, multiplier, and phase-alignment functions to create the required output frequencies. The central benefit is reduced component count and easier clock-tree management compared with several unrelated oscillator and divider combinations. When designing around the ICS345RP, confirm the reference frequency, target output frequencies, output-routing requirements, and permitted programming scheme against the manufacturer datasheet. The 20-SSOP footprint requires careful PCB layout, particularly around supply decoupling, clock output routing, and grounding. The package should not be replaced with a mechanically similar part unless its pinout, programming model, PLL performance, and output-routing behavior have been verified. This page summarizes the verified device identity, package, frequency, PLL, and output-count information while highlighting the practical clock-tree role of the ICS345RP. Detailed electrical limits, pin assignments, programming registers, and application-specific replacement decisions should be confirmed in the Renesas ICS345 documentation before schematic sign-off or PCB release.

Devis Contact
ICS348RP - 200MHz Quad-PLL Clock Synthesizer | Renesas
ICS348RP

ICS348RP - 200MHz Quad-PLL Clock Synthesizer | Renesas

The Renesas ICS348RP is a quad-PLL field-programmable VersaClock synthesizer that generates up to nine high-quality, high-frequency clock outputs from a crystal or external clock input. Its maximum clock frequency is 200 MHz, and the device provides LVCMOS clock outputs in a 20-pin QSOP/SSOP package. The ICS348RP belongs to the clock generator and frequency synthesizer family, combining phase-locked-loop frequency multiplication with programmable output generation. A clock generator is an integrated circuit that creates one or more timing references from a stable source. A frequency synthesizer extends this function by multiplying, dividing, or otherwise transforming a reference frequency. The ICS348RP places four PLLs and multiple output stages in one timing IC, allowing a system to distribute related reference and working clocks while avoiding a collection of separate oscillator and divider circuits. The ICS348RP supports a crystal or clock input, includes PLL bypass capability, and can produce as many as nine clock outputs. These characteristics make it useful where a board needs several coordinated frequencies for processors, memory, serial links, converters, or data-conversion equipment. Because the device is field programmable, system designers can configure output behavior rather than relying only on fixed factory frequencies. Its quad-PLL architecture provides the central mechanism for deriving multiple clock outputs from a common low-frequency reference. Maintaining a shared reference can simplify synchronization across subsystems and reduce the number of separate frequency-generation components. The bypass path is important during development because it provides a way to evaluate clock-source conditions without relying on every PLL operating at once. Typical applications include communications equipment, test and measurement instruments, industrial control systems, data-acquisition modules, and embedded computing platforms. The device is especially relevant when a design needs several related high-frequency outputs but has limited board space or wants to centralize clock generation in one programmable component. Layout should preserve short, controlled clock paths and place support components near their associated pins. Differential and high-speed routing requires careful return-path planning, while power and ground distribution should remain stable across the clock-generation domain. Designers should verify output frequency, jitter, phase relationship, and bypass behavior against the final system timing budget. This product page organizes the key clock-synthesis facts, package information, practical use cases, and engineering guidance for ICS348RP. It also highlights the distinction between electrical substitutes and package-only order-code variants so procurement and design teams can evaluate compatibility correctly before making an engineering change.

Devis Contact
ICS348RPT - 200MHz Quad PLL Clock Synthesizer | Renesas
ICS348RPT

ICS348RPT - 200MHz Quad PLL Clock Synthesizer | Renesas

Renesas Electronics ICS348RPT is a quad-PLL field-programmable VersaClock synthesizer with a maximum output frequency of 200 MHz, LVCMOS outputs, and support for clock or crystal inputs. The device is packaged in a 20-pin QSOP for surface-mount production and operates across a 0°C to 70°C temperature range. It belongs to the clock and timing hierarchy of semiconductor ICs, where clock synthesizers generate, multiply, divide, and distribute reference clocks for digital and analog systems. A PLL-based clock synthesizer is a timing IC that locks an internal oscillator to an external reference and then produces one or more programmable clock outputs. This architecture allows a system designer to derive multiple related frequencies from one reference source. The ICS348RPT combines four PLL channels with field-programmability, making it suitable for systems requiring multiple independently configurable clock domains and flexible output ratios. Key features include a 200 MHz maximum output frequency, four PLL outputs, PLL bypass capability, LVCMOS output logic, and clock or crystal input support. Its 20-terminal QSOP package measures 8.65 mm by 3.9 mm. The component uses CMOS technology, has a surface-mount mounting design, and carries a JESD-609 code of e0. Tape-and-reel packaging supports automated assembly and high-volume manufacturing. The ICS348RPT is a clock-generation and distribution device rather than a general-purpose timing controller. Its programmable output structure can be used to establish relationships among reference, feedback, and output clocks while maintaining a single-board reference architecture. Designers should compare frequency limits, input format, output logic level, programming interface, and package details before using it in a new design. Typical uses include communications equipment, test and measurement systems, industrial control electronics, and embedded digital platforms that need several derived clocks. In such systems, the quad architecture can reduce the number of separate oscillator and divider combinations while preserving central control of clock relationships. LVCMOS outputs are particularly useful when downstream receivers require a conventional single-ended clock interface. A critical design consideration is signal integrity. Route clock outputs over controlled-impedance traces, provide a continuous reference plane, and keep clock circuitry away from high-current switching paths. Decoupling should be placed close to the supply pins, and unused outputs should be terminated according to the receiver and board requirements. Validate source-to-endpoint timing and jitter margins on the final layout. This product page combines the manufacturer-level identity, confirmed package and timing characteristics, practical clock-tree design guidance, and a focused comparison of documented VersaClock family alternatives. Use the manufacturer datasheet for programming registers, electrical limits, recommended application circuits, and the authoritative pin-description table before completing a production design.

Devis Contact
ICS409M - 80MHz PC Peripheral Clock | Renesas Electronics
ICS409M

ICS409M - 80MHz PC Peripheral Clock | Renesas Electronics

The Renesas Electronics ICS409M is a PC peripheral clock synthesizer with PLL capability, crystal input, LVCMOS output, and a maximum frequency of 80 MHz. It is packaged in an 8-pin SOIC and is designed to reduce external component count in PC peripheral clocking systems. The supported output ratio is 1:3, while one synthesizer circuit provides a compact clock-generation solution for compatible legacy PC applications. A clock synthesizer is a clock and timing integrated circuit that derives one or more stable output signals from a reference source. Within the hierarchy of oscillator, phase-locked loop, clock generator, timing IC, and semiconductor, the ICS409M uses an on-chip crystal oscillator and PLL to support PC peripheral clock requirements. This category is important when a system needs a defined frequency that differs from the original crystal reference. Key verified features include PLL support, crystal input, LVCMOS output, one clock circuit, a 1:3 input-to-output ratio, and operation up to 80 MHz. The 8-pin SOIC package supports conventional surface-mount PCB assembly. Its integration can reduce the number of discrete oscillator and divider components required around a PC peripheral interface. The verified source material describes the ICS409M as a cost-effective clock synthesizer optimized for PC peripheral applications. The device accepts a common 14.31818 MHz crystal through its on-chip crystal oscillator and uses the PLL to establish the required output relationship. This reference arrangement is relevant to legacy PC interfaces whose clock trees were designed around the widely used 14.31818 MHz frequency. The LVCMOS output is suitable for digital clock distribution when voltage levels, timing margins, and load requirements are confirmed in the original system design. Typical uses include PC peripheral timing, interface clock generation, frequency multiplication, and replacement of discrete crystal-oscillator and divider networks. Because the available verified data does not provide complete electrical limits or timing tables, engineers should consult the manufacturer datasheet and system clock requirements before release to production. The primary design consideration is compatibility. Confirm the crystal frequency, target output frequency, output duty cycle, supply voltage, load capacitance, and PCB footprint before substitution. A nominal 80 MHz maximum rating does not establish that every downstream timing requirement is met; system-level rise-time, jitter, and setup-and-hold margins remain decisive. This page consolidates verified distributor and technical-source information, package and frequency details, sourcing links, and practical replacement guidance that is not presented as a single consolidated manufacturer datasheet.

Devis Contact
ICS409MLF - 80MHz LVCMOS PLL Clock Synthesizer | Renesas
ICS409MLF

ICS409MLF - 80MHz LVCMOS PLL Clock Synthesizer | Renesas

Renesas Electronics ICS409MLF is a PC peripheral clock synthesizer with a 14.31818 MHz crystal input, an integrated phase-locked loop, and a maximum output frequency of 80 MHz in an 8-pin SOIC package. The device generates a 1:3 input-to-output clock ratio and uses LVCMOS-compatible outputs to support low-cost PC peripheral clocking. A clock synthesizer is a timing IC that converts a lower-frequency reference into one or more system clock signals. Clock synthesizer, PLL clock generator, and frequency multiplier are related terms within the clock and timing IC hierarchy, which also includes clock buffers, dividers, oscillators, and timer ICs. The ICS409MLF is intended to reduce the number of discrete components required in personal-computer peripheral applications. The ICS409MLF supports a common 14.31818 MHz crystal through its on-chip crystal oscillator. Its PLL-based architecture multiplies the reference clock by three, producing an 80 MHz maximum output. The specified operating supply range is 3 V to 3.6 V, making the device suitable for systems using a 3.3 V clock domain. The principal technical benefit is integration: a crystal oscillator, phase-locked loop, and frequency-multiplying output are combined in one IC. This reduces the component count compared with discrete oscillator and multiplier arrangements. The single-circuit implementation also simplifies clock routing, although output drive, jitter, phase accuracy, and loop stability must still be evaluated against the timing requirements of the target peripheral. Typical applications include PC peripheral interfaces, legacy storage and bus controllers, embedded PC-compatible systems, and communication equipment requiring a 3.3 V LVCMOS reference clock. A 14.31818 MHz crystal is normally connected at the reference input, while the divided PLL architecture generates the higher-frequency clock used by the peripheral subsystem. When laying out the circuit, keep the crystal and load capacitors close to the device and route the clock output away from noisy switching nodes. Confirm ground-plane continuity, output-load assumptions, and the required clock frequency before releasing the layout. Pin assignments and crystal-load details should be taken directly from the manufacturer pin-description table and application guidance.

Devis Contact
ICS409MT - 80MHz PC Peripheral Clock | Renesas Electronics
ICS409MT

ICS409MT - 80MHz PC Peripheral Clock | Renesas Electronics

Renesas Electronics ICS409MT is a clock and frequency synthesizer designed for PC peripheral applications. It uses an on-chip crystal oscillator with a 14.31818 MHz crystal input, provides one LVCMOS clock output, and supports output frequencies up to 80 MHz. The device is packaged in an 8-pin SOIC and operates across the 0°C to 70°C temperature range. Its 1:3 input-to-output ratio makes it suitable for systems that derive a higher-frequency operating clock from the common 14.31818 MHz reference used in PC architectures. A clock synthesizer is a timing IC that generates or distributes clock signals needed by digital logic. Clock generators and phase-locked loops sit within the clock and timing IC category, where they support processors, memory interfaces, communications equipment, and computer peripherals. By multiplying a stable reference frequency, the ICS409MT reduces the number of separate oscillators and distribution components required in a system while providing a defined LVCMOS interface for downstream circuitry. The principal features of the ICS409MT are its 80 MHz maximum output frequency, single LVCMOS output, single PLL, crystal input, and 1:3 input-to-output ratio. The 14.31818 MHz reference arrangement supports designs based on the traditional PC timing domain, while the on-chip oscillator eliminates the need for an external oscillator module. The 8-SOIC surface-mount package also supports compact, automated PCB assembly compared with larger through-hole clock packages. Technically, the ICS409MT is identified as a PLL-based clock and frequency synthesizer with one clock circuit. The oscillator and PLL establish the output timing relationship between the crystal reference and the LVCMOS clock output. The listed 1:3 ratio indicates that the output clock is three times the reference frequency, producing 42.95454 MHz when operated with a 14.31818 MHz crystal. Input and output polarity, PLL loop bandwidth, jitter, output duty-cycle limits, and detailed electrical timing values require confirmation from the manufacturer datasheet before final timing-budget work. Typical applications include PC peripheral clock generation, legacy computer interface cards, embedded systems that use a 14.31818 MHz reference, communication equipment, and digital subsystems requiring a locally generated LVCMOS clock. In these systems, the device can centralize clock multiplication and reduce oscillator-component count. Its 80 MHz ceiling provides useful headroom when the intended peripheral clock is 42.95454 MHz, while the single-output architecture suits designs that need one derived clock rather than several independently managed clocks. The primary design consideration is crystal and layout stability. Place the crystal, load capacitors, and ground path close to the device, and route high-current clock output away from sensitive analog and communication signals. Validate the resulting clock against the system’s frequency tolerance, jitter, rise-time, duty-cycle, and load requirements. Because the documented operating range is 0°C to 70°C, the part should not be assumed suitable for industrial temperature environments without additional qualification. This product record combines the device architecture, package information, operating limits, search-oriented technical questions, application guidance, and engineering-selection context. It also clearly separates confirmed characteristics from parameters that require datasheet confirmation, helping designers evaluate ICS409MT before committing it to a PC peripheral, legacy computing, or embedded clock-generation design.

Devis Contact
ICS411M - PC Peripheral Clock | IDT | SOIC-8
ICS411M

ICS411M - PC Peripheral Clock | IDT | SOIC-8

The Integrated Device Technology ICS411M is a cost-effective PC peripheral clock synthesizer in an 8-SOIC package. The verified product data identifies it specifically for PC motherboard and peripheral applications, but does not provide a manufacturer-hosted technical datasheet. The component is therefore best characterized by its stated clock-generator role, legacy origin, package format, and reported distributor inventory rather than unsupported frequency, voltage, or timing claims. It belongs to the clock and timing IC hierarchy, where oscillators and clock synthesizers distribute timing signals used to coordinate digital logic. Its purpose in a personal computer was to support multiple peripheral buses or subsystem clocks while reducing the number of separate clock components required on the motherboard. An integrated clock synthesizer combines oscillator circuitry, frequency generation or distribution, and output-driver functions into one timing IC. Such devices help maintain defined relationships between digital signals. In computer systems, those relationships determine when processors, buses, storage controllers, and peripherals may exchange data. The ICS411M is described as a PC peripheral clock and is intended to optimize component count in PC motherboard and peripheral designs. Its 8-SOIC package provides a compact, surface-mount form suitable for legacy motherboard assembly, although physical dimensions and pin functions require confirmation from an authentic technical datasheet. The available evidence establishes three important procurement facts: ICS411M was originally associated with IDT, Integrated Device Technology Inc; it is packaged as 8-SOIC, listed with a nominal width of 3.90 mm; and distributor listings report inventory. However, the verified data does not state operating voltage, output count, supported clock frequencies, frequency tolerance, jitter, operating temperature, or pin assignments. Those values must not be inferred from similarly named clock ICs. This limitation is especially important because clock generators with the same package can differ substantially in pinout and output behavior. ICS411M is relevant when researching or maintaining older PC peripheral platforms rather than designing a new clock subsystem from first principles. Verified distributor listings include references to octopart clock buffers and drivers, but these search results do not establish a technical replacement or lifecycle recommendation. Before substitution, an engineer should compare the authentic ICS411M pinout, supply voltage, output waveform, frequency plan, enable logic, and timing margins. Octopart and the listed distributors can assist with sourcing, but manufacturer documentation remains the controlling source for design decisions. A typical legacy motherboard application would place the ICS411M among the system timing circuitry and route its outputs according to the original platform schematics. Because exact output assignments are unavailable in the verified data, PCB reuse cannot be approved from the package alone. Clock routing should remain short, reference planes should return cleanly, and unused outputs require the treatment specified by the original platform design. Modern replacements should not be assumed to be pin compatible. The key engineering caution is documentation completeness. Verify the original manufacturer or archived manufacturer datasheet before energizing, probing, or substituting ICS411M in powered equipment. Confirm device markings, supply rails, oscillator connections, and every package pin. This page deliberately distinguishes verified product identity from unverified technical assumptions and provides sourcing links, practical assessment guidance, and transparent data gaps for repair, maintenance, and legacy-system evaluation.

Devis Contact
ICS411MLF - 25MHz PC Peripheral Clock | Renesas Electronics
ICS411MLF

ICS411MLF - 25MHz PC Peripheral Clock | Renesas Electronics

The Renesas Electronics ICS411MLF is a 25 MHz PC peripheral clock synthesizer packaged in an 8-pin SOIC surface-mount package. It operates from a 3 V to 3.6 V supply and is intended for personal-computer motherboard and peripheral clock applications. The device provides a cost-effective clock-generation solution designed to reduce the component count associated with distributing a common peripheral reference clock. A peripheral clock synthesizer is a type of clock and timing integrated circuit that generates or conditions a stable reference signal for digital subsystems. Clock generators and clock buffers sit within the broader clock-and-timing hierarchy, which supports synchronization, data transfer, and deterministic circuit operation in personal computers, communications equipment, and embedded systems. The ICS411MLF converts a system timing reference into the clock required by compatible PC peripheral functions. Key characteristics include a nominal output frequency of 25 MHz, a 3 V to 3.6 V operating supply range, and an 8-SOIC package compatible with standard surface-mount assembly. Its single-function architecture allows a motherboard or peripheral design to obtain a defined clock without implementing a general-purpose programmable oscillator. The 8-pin package also keeps the required PCB footprint compact while providing separate supply and clock-related connections. The ICS411MLF is intended for applications where a conventional, fixed-frequency clock source is sufficient and the design priority is component-count reduction. Its fixed 25 MHz output simplifies schematic design because the required frequency does not need to be programmed or adjusted during operation. The manufacturer describes the device as a cost-effective clock synthesizer for PC motherboard and peripheral applications, making it most appropriate for established platform architectures rather than new designs requiring programmable frequency, spread-spectrum modulation, or fractional-N synthesis. Typical uses include PC motherboard peripheral clock distribution, storage-controller clocking, interface-module clocking, and legacy peripheral systems operating from a 3.3 V rail. In these designs, the synthesizer supplies a common local reference while system-level oscillators or phase-locked loops establish the master timing hierarchy. Power-system design must still account for the device's 3 V to 3.6 V operating range and verify the output behavior against the load and trace requirements of the connected peripheral. The principal design consideration is compatibility with the target clock tree. Confirm the required frequency, supply voltage, output-load expectations, and board-level timing budget in the manufacturer datasheet before layout release. Route the clock output as a short, controlled-impedance trace and keep the supply return path close to the device so that the fixed 25 MHz reference reaches the load without unnecessary added noise or timing distortion. This page organizes the manufacturer and distributor information for the ICS411MLF into an engineering-oriented product record. It combines the 25 MHz clock function, supply range, 8-SOIC packaging, purchasing guidance, and design considerations so that engineers can evaluate the device quickly against motherboard and peripheral clock requirements.

Devis Contact
ICS411MT - 25MHz LVCMOS PC Clock Generator | Renesas
ICS411MT

ICS411MT - 25MHz LVCMOS PC Clock Generator | Renesas

The Renesas Electronics ICS411MT is a PC peripheral clock synthesizer with PLL-based clock generation, an input clock interface, and LVCMOS output. It supports operation up to 25 MHz and contains one clock circuit in an 8-pin SOIC package. The device was developed as a cost-effective solution for PC motherboard and peripheral clock-distribution requirements, providing a compact alternative to discrete oscillator, divider, and buffer combinations. A clock generator is a timing IC that converts an input reference into one or more stable clock signals for digital systems. Clock synthesizers sit within the clock and timing IC family, where phase-locked loops (PLLs) can multiply, divide, or otherwise condition a reference frequency. Within a computer platform, the resulting clock can synchronize bus activity, interface circuits, peripheral controllers, and other logic that must operate from a common timing reference. Key characteristics of the ICS411MT include its PLL capability, clock input, LVCMOS output, maximum operating frequency of 25 MHz, and single-circuit architecture. These features make the part relevant to legacy PC motherboard and peripheral clocking where a compact integrated solution is preferred over multiple discrete timing components. Its 8-pin SOIC package also supports conventional surface-mount assembly and automated PCB production. Technically, the ICS411MT combines reference-clock conditioning with PLL-based frequency generation. A PLL synchronizes an output phase to a reference signal while permitting frequency synthesis through internal loop control. This architecture is useful when the board must derive a required operating clock from an available reference while maintaining a defined relationship between input and output. The manufacturer datasheet is the controlling document for loop bandwidth, jitter, operating limits, pin functions, and electrical characteristics. Typical applications include PC motherboard clock generation, peripheral interface timing, clock distribution for legacy computer logic, and replacement of discrete oscillator-and-divider networks. The device can also serve systems in which one LVCMOS clock domain must be reproduced for multiple downstream circuits. Board designers should verify timing margins, output drive, supply requirements, and all enable or feedback connections against the manufacturer datasheet before production. The primary design consideration is to treat the clock as a high-speed signal even though its maximum frequency is only 25 MHz. Route the output with a short, controlled-impedance path, keep the reference and output returns connected to a common ground plane, and place decoupling capacitors close to the supply pins. Avoid unnecessary stubs and test-probe loops that can degrade edge quality or introduce reflections. This page consolidates the verified clock-generator specifications, package information, sourcing workflow, pinout status, and engineering guidance for ICS411MT evaluation. It also distinguishes documented functionality from parameters that must be confirmed in the manufacturer datasheet, helping engineers assess fit before committing to a PCB or production release.

Devis Contact
ICS477R-05 - 74.175MHz Quad PLL VCXO | Renesas Electronics
ICS477R-05

ICS477R-05 - 74.175MHz Quad PLL VCXO | Renesas Electronics

Renesas Electronics ICS477R-05 is a 74.175 MHz quad phase-locked-loop clock generator with a voltage-controlled crystal oscillator, packaged in a 28-pin SSOP. It generates five high-quality, high-frequency clock outputs, including two reference outputs, from a low-frequency pullable crystal. The device is designed to replace multiple discrete crystals and crystal oscillators in electronic systems requiring coordinated, low-jitter timing. A phase-locked loop is a feedback-controlled timing circuit that locks a high-frequency oscillator to a stable reference. The ICS477R-05 adds VCXO functionality, allowing the frequency of a crystal oscillator to be adjusted within a limited range by an external control voltage. In the clock and timing hierarchy, this product is a PLL-based clock generator with a voltage-controlled crystal reference. The ICS477R-05 operates from a 3.15 V to 3.45 V supply and accepts a crystal reference while producing LVCMOS clock outputs. Its quad-PLL architecture supports five outputs, which can simplify systems that previously required several independent oscillators or output dividers. The 28-SSOP surface-mount package also supports compact HDTV and related digital-video equipment. The key benefit of integrating the PLL, crystal control, and five clock outputs into one device is reduced component count and centralized timing. Unlike a free-running clock generator, the PLL architecture is intended to derive multiple related frequencies from a common pullable crystal. This arrangement is particularly useful when the system requires several outputs with defined phase relationships for video processing, communications, or synchronization. Typical applications include HDTV master-clock generation, digital video timing, broadcast equipment, crystal-oscillator consolidation, and clock-tree replacement in electronic systems. The device can reduce the number of discrete frequency sources while providing one controllable reference network. Its 74.175 MHz operating point is particularly relevant to video timing architectures associated with high-definition television systems. The primary design consideration is clock quality. PCB placement, crystal selection, loop filtering, supply decoupling, and output-load configuration can affect phase noise, jitter, and output stability. Use the pin-description and application information in the Renesas datasheet when assigning tracks and selecting the pullable crystal and its associated load network. This product page consolidates the device architecture, operating limits, lifecycle information, package details, replacement-family options, and practical clock-design guidance into one engineering reference for evaluating the ICS477R-05.

Devis Contact
ICS487G-25 - 48MHz Quad PLL Clock Generator | Renesas Electronics
ICS487G-25

ICS487G-25 - 48MHz Quad PLL Clock Generator | Renesas Electronics

The Renesas Electronics ICS487G-25 is a 48 MHz quad phase-locked-loop clock generator designed for digital television equipment and packaged in a 16-pin TSSOP. It operates from a 3.135 V to 3.465 V supply and provides four PLL-related clock outputs, making it suitable for systems requiring multiple related signals from a compact clock-generation circuit. A phase-locked-loop clock generator is a timing IC that synchronizes an output frequency to a reference signal. The PLL architecture supports frequency generation or multiplication while distributing multiple clock phases or related outputs. Within the broader semiconductor hierarchy, this device is a clock and timing IC, a programmable logic device based on phase-locked-loop technology, and a system-level clock-generation component. The ICS487G-25 is identified as a quad PLL for DTV, with a nominal operating frequency of 48 MHz. Its 3.135 V to 3.465 V supply range centers around a nominal 3.3 V rail, while the 16-TSSOP package provides a surface-mount footprint suitable for compact digital television and video-processing equipment. The device is supplied in a tube according to the manufacturer product listing. The quad-output architecture can reduce the number of separate oscillator or buffer components needed when several related clocks are required. Because PLL outputs share a common frequency reference, they can provide repeatable phase relationships when configured correctly. Exact output frequencies, feedback ratios, jitter, operating temperature, and control-pin functions must be confirmed in the manufacturer datasheet before final circuit design. Typical uses include digital television receiver and display electronics, video timing systems, set-top equipment, and other consumer or professional AV platforms operating from a 3.3 V rail. The device is particularly relevant where four related clock signals are needed close to a video processor, scaler, demodulator, or digital interface. PCB implementation requires a low-inductance path between the device and its decoupling capacitor. Place the 3.3 V supply bypass capacitor close to the supply pin, keep clock routes short and controlled, and route other high-speed signals away from PLL inputs and outputs. Use the pin-description table in the manufacturer datasheet when assigning tracks and confirming the exposed or no-connect positions. This page combines the 48 MHz operating point, 3.3 V supply range, 16-TSSOP packaging information, replacement analysis, and practical layout guidance in one engineering-focused reference. It is intended to accelerate initial circuit selection while directing design-critical details to the authoritative Renesas datasheet and layout guidance.

Devis Contact
ICS501AM - 200MHz PLL Clock Generator | Renesas Electronics
ICS501AM

ICS501AM - 200MHz PLL Clock Generator | Renesas Electronics

The Renesas Electronics ICS501AM is a single PLL-based clock generator that produces a CMOS clock output at up to 200 MHz from a lower-frequency crystal or clock input. It uses a 1:1 input-to-output ratio, accepts either clock or crystal input, and is housed in an 8-pin SOIC package measuring 3.90 mm wide. The ICS501A LOCO series provides a practical clock multiplication solution when a system requires a higher-frequency operating clock without requiring a full custom oscillator or complex external frequency-generation network. A PLL clock generator is a timing IC that phase-locks its output to a reference source and multiplies the reference frequency to produce a stable, high-frequency clock. Within the broader semiconductor hierarchy, the ICS501AM belongs to the clock and timing IC family, specifically the clock-generator and PLL subcategory. Its role in electronic systems is to distribute a high-speed clock for digital logic, processors, communication equipment, and other clocked circuits while maintaining a defined relationship to the input reference. The primary features of the ICS501AM are its maximum output frequency of 200 MHz, single-clock-generator configuration, 1:1 input-to-output ratio, PLL architecture, and CMOS output. The ability to operate from either a crystal or external clock gives the device flexibility in clock-tree design. Its 8-SOIC surface-mount package also allows relatively compact PCB placement compared with larger through-hole oscillator arrangements. These characteristics make the part useful where frequency generation, standard logic voltage compatibility, and manageable board area are important. Technically, the ICS501AM uses a phase-locked loop to generate a higher-quality clock output from a lower-frequency reference. The PLL-based approach provides a controlled relationship between the input reference and generated output, while the CMOS output supports integration with conventional digital timing circuits. The 1:1 ratio identifies the device as a clock-generation solution rather than a programmable integer or fractional-N frequency synthesizer. Exact input frequency limits, operating-voltage range, output jitter, and load-drive capability should be confirmed in the manufacturer datasheet before final circuit release. Typical applications include digital control systems, embedded processing platforms, communication modules, industrial control equipment, and general-purpose clock-distribution designs. In each case, the part can serve as the central clock source when a higher-frequency CMOS clock is required and a crystal or lower-frequency reference is already present. The absence of differential inputs or outputs also simplifies point-to-point clock routing, although signal-integrity and return-path design remain important at high clock rates. When laying out a design using the ICS501AM, keep the crystal, reference clock, feedback network, and decoupling paths consistent with the manufacturer reference configuration. Confirm all capacitance, drive-strength, and grounding requirements before fabrication because incorrect peripheral-component values or long loop lengths can affect PLL stability and clock quality. Validate startup, jitter, and output amplitude across temperature and supply-voltage corners rather than relying only on nominal simulation results. This product page combines the ICS501AM clock-generator specifications, verified package information, compatible same-family ordering options, and practical integration guidance. It provides engineers with a concise basis for initial design selection while directing detailed timing, electrical-limit, and qualification decisions to the Renesas manufacturer documentation.

Devis Contact
ICS501AMI - 166MHz Clock Generator IC | Renesas | SOIC-8
ICS501AMI

ICS501AMI - 166MHz Clock Generator IC | Renesas | SOIC-8

The Renesas Electronics ICS501AMI is a 166MHz clock generator IC packaged in an 8-pin SOIC, using a CMOS clock interface to produce a high-quality output from a lower-frequency crystal or clock input. As an ICS501A LOCO clock multiplier, it provides a compact alternative to a full crystal oscillator when the system already has a reference source that can be multiplied. The 0.154-inch-wide SOIC-8 package measures 3.90mm in body width and supports surface-mount assembly. A clock generator is a timing IC that converts or multiplies a lower-frequency reference into a higher-frequency clock for digital logic, processors, communications equipment, and embedded control systems. Within the clock and timing hierarchy, the ICS501AMI belongs to the clock-generator and PLL-clock-multiplier class, combining a frequency reference with a phase-locked loop. It differs from a conventional oscillator because it does not require a complete resonator-and-amplifier arrangement when an external reference is available. The ICS501A architecture supports generation of a high-quality, high-frequency clock output from a lower-frequency crystal or clock input. Its stated maximum operating frequency is 166MHz, while CMOS-compatible clock signaling integrates with modern digital systems. Operating from a single low-voltage supply keeps the implementation compact, although the exact supply-voltage limits, current consumption, output jitter, lock-range limits, and temperature ratings should be confirmed against the manufacturer datasheet before release to production. A typical implementation places the low-frequency reference at the timing input, connects the required support components, and routes the multiplied clock to the destination logic. The crystal or reference circuit must satisfy the frequency and load requirements stated in the manufacturer datasheet. PCB layout, grounding, and supply bypassing become increasingly important as the output frequency rises because clock-edge jitter and power-supply noise can reduce system timing margin even when the nominal output frequency is correct. ICS501AMI is appropriate for digital control systems, embedded processing, industrial electronics, communications equipment, and retrofit designs that use the established ICS501 footprint. It can also serve clock-tree distribution when an existing reference signal should be reused. For battery-powered equipment, compare the device's operating current and idle behavior against system power budgets. In systems requiring precise synchronization among multiple domains, first confirm the device's PLL lock behavior and output stability under the intended reference conditions. Use the manufacturer's pin-description table when assigning PCB tracks, and preserve the documented bypass-capacitor layout to minimize supply noise at the clock pins. Verify startup, reference stability, output waveform, and maximum operating frequency across the full intended temperature range. This page combines the available manufacturer and distributor information with practical implementation guidance, sourcing questions, and clearly qualified same-package alternatives for design review.

Devis Contact
ICS501AMT - 200MHz PLL Clock Generator | Renesas Electronics
ICS501AMT

ICS501AMT - 200MHz PLL Clock Generator | Renesas Electronics

Renesas Electronics ICS501AMT is a single PLL-based clock generator that produces a CMOS clock output up to 200 MHz from a lower-frequency crystal or clock input. It operates from a 3 V to 3.6 V supply in an 8-SOIC surface-mount package and is supplied in tape-and-reel packaging. The device provides a 1:1 input-to-output ratio, supports either crystal or external-clock excitation, and uses a non-differential clock architecture. A PLL clock generator is an integrated clock and timing circuit that locks an internal oscillator to an external reference before multiplying or conditioning that reference into a higher-frequency output. In the broader semiconductor hierarchy, the ICS501AMT belongs to the clock-generator family, within clock and timing ICs and the broader power-management and semiconductor ecosystem. Its purpose is to provide a stable, high-frequency timing reference without requiring a complete external crystal-oscillator assembly for every application. The primary features of the ICS501AMT include a maximum output frequency of 200 MHz, one clock circuit, a 1:1 input-to-output ratio, CMOS output compatibility, and support for either a crystal or an external clock. These characteristics suit designs that need a higher-frequency clock derived from a lower-frequency source. The 3 V to 3.6 V operating range also places the device in a supply class commonly used by compact digital, communications, and embedded systems. Technically, the ICS501AMT uses phase-locked-loop clock multiplication to establish a high-quality clock output from its reference input. The architecture is intended to replace conventional discrete crystal-oscillator arrangements in suitable electronic systems. Because the device accepts either a crystal or clock input, the design can support different reference-generation methods, although the crystal frequency, loop stability, jitter, output-waveform requirements, and load conditions must be evaluated before committing to a specific implementation. Typical applications include digital logic clocking, communications-module timing, embedded processing, interface timing, instrumentation, and general-purpose frequency multiplication. In each case, the device acts as the clock source for circuitry requiring a CMOS-compatible reference. Its surface-mount SOIC package supports automated assembly, while the tape-and-reel configuration is intended for high-volume production and pick-and-place manufacturing. The principal design consideration is preserving a clean reference and a controlled board environment. Route the crystal or clock input with short, symmetric traces, maintain the recommended support network, and keep sensitive timing paths away from noisy switching circuitry. Confirm output loading, rise-time limits, and downstream clock requirements against the manufacturer datasheet before layout release. The 200 MHz maximum rating is a device limit, not a guarantee that every crystal or board implementation will produce acceptable jitter at that frequency. This product page consolidates the device architecture, operating limits, package information, sourcing guidance, and engineering trade-offs needed to evaluate the ICS501AMT. It also distinguishes verified drop-in replacements from generic clock-generator alternatives, helping designers assess PCB compatibility, supply voltage, output frequency, and timing requirements before selecting a replacement.

Devis Contact
ICS501G - 160MHz PLL Clock Generator | Renesas | Timing
ICS501G

ICS501G - 160MHz PLL Clock Generator | Renesas | Timing

The Renesas Electronics ICS501G is a single-circuit PLL clock generator with a maximum frequency of 160MHz, CMOS output, and support for crystal or external clock inputs. It is available in 8-TSSOP and 8-MSOP packages, making it suitable for compact digital systems that require frequency multiplication or clock generation. The verified distributor listing identifies the device as an 8-pin surface-mount clock-generator IC. A PLL-based clock generator multiplies or conditions a lower-frequency reference to produce a stable, high-frequency clock for digital logic, processors, communications equipment, and embedded systems. The ICS501G belongs to the broader clock and timing hierarchy: oscillator and crystal support → clock generator → PLL clock multiplier → digital timing subsystem. Its CMOS output and 160MHz maximum frequency suit moderate-speed digital clocking requirements, although timing margins must be checked for the selected operating condition. Key verified attributes include PLL operation, one clock-generator circuit, a 1:1 input-to-output ratio in the cited specification summary, and no differential input or output. The available package information is 8-TSSOP or 8-MSOP, depending on the orderable package variant represented by the ICS501G family listing. The exact electrical limits, crystal-load details, output-drive capability, jitter, and recommended decoupling requirements were not supplied in the verified excerpts and must be confirmed in the manufacturer datasheet before layout release. Typical uses include microcontroller and processor clock generation, digital interface timing, embedded control systems, and communications modules requiring a local high-frequency reference. The device is intended to replace conventional crystal-oscillator arrangements in suitable electronic systems, according to the Renesas product description. Designers should account for supply voltage, output load, trace impedance, grounding, and the timing relationship between the generated clock and downstream circuitry. A key design consideration is to validate the reference clock and PLL configuration against the exact datasheet before production. Keep the oscillator and feedback paths short, provide a clean return path, and place required decoupling capacitors close to the supply pins. Because the verified data does not state the full pinout, pin names, or package-specific ordering details, those values remain subject to datasheet verification. This page consolidates verified distributor specifications, official Renesas datasheet information, application guidance, and drop-in replacement constraints into an engineering-focused component record for sourcing and design review.

Devis Contact