Produits (44 000+)

ICS501GI - 140MHz PLL Clock Generator | Renesas Electronics
ICS501GI

ICS501GI - 140MHz PLL Clock Generator | Renesas Electronics

Renesas Electronics ICS501GI is a PLL clock-generator integrated circuit that produces a high-quality clock output from a lower-frequency crystal or external clock input. The device supports operation up to 140 MHz, uses a CMOS output, and is packaged as an 8-TSSOP or 8-MSOP with a stated width of 0.118 inches, or 3.00 mm. It is intended for systems that require a stable, high-frequency clock without implementing a complete clock-generation subsystem on the host board. A PLL clock generator is a timing IC that multiplies or otherwise conditions a reference clock to produce one or more higher-frequency outputs. Clock generators belong to the broader clock and timing IC hierarchy, where they work alongside oscillators, dividers, buffers, phase-locked loops, and frequency synthesizers. Their primary function is to convert a convenient low-frequency crystal reference into the clock domain required by processors, communication circuits, converters, and digital peripherals. The ICS501GI uses a phase-locked loop, allowing an external clock or crystal to serve as the reference while the internal multiplier generates a higher-frequency CMOS clock. Its maximum listed operating frequency is 140 MHz. The device contains one clock-generation circuit and has a listed input-to-output ratio of 1:1 in the referenced specification summary. These characteristics make it suitable for designs requiring a compact, single-channel clock source rather than a programmable multi-output synthesizer. Renesas markets the ICS501 family under the LOCO name, describing it as a cost-effective method for generating a high-quality, high-frequency clock from a lower-frequency crystal or clock input. The CMOS output interface suits digital systems operating with CMOS-compatible logic levels. Because this ICS501GI variant is offered in a compact 8-pin TSSOP/MSOP package, it can support space-conscious boards while retaining separate connections for power, ground, reference input, and clock output. Typical uses include digital control systems, embedded processing modules, communications equipment, clock distribution for digital logic, and clock generation where a system already has a suitable reference crystal or external clock. The PLL-based approach can reduce the need for high-frequency external crystals while providing a clock output up to 140 MHz. System designers must still confirm loop stability, output jitter, startup behavior, load capacitance, and supply requirements against the manufacturer datasheet before releasing a production design. Layout should keep the reference-crystal or clock-input path short and route the high-speed CMOS output away from sensitive analog and communication nodes. Follow the manufacturer’s recommended input, output, and bypass-capacitor connections, and account for the required ground-return path under the exposed or connected ground pins. If frequency accuracy, jitter, or reference sensitivity is critical, evaluate the complete clock tree rather than relying only on the 140 MHz maximum-frequency headline figure. This page combines the Renesas family identification, distributor package details, PLL and frequency specifications, pin-compatible cross-reference findings, and practical selection guidance. It also distinguishes verified drop-in candidates from generic cross-reference tools, helping engineers focus on same-package replacements that still require datasheet-level timing and application validation.

Devis Contact
ICS501GIT - 140MHz CMOS Clock Generator | Renesas Electronics
ICS501GIT

ICS501GIT - 140MHz CMOS Clock Generator | Renesas Electronics

The Renesas Electronics ICS501GIT is a single-output CMOS clock generator with a maximum frequency of 140 MHz, a phase-locked loop, and crystal or clock input support, supplied in an 8-pin TSSOP package. It provides a 1:1 input-to-output ratio and is designed to generate a high-quality clock from a lower-frequency reference. The ICS501GIT is commonly associated with the LOCO family of clock generators, combining frequency multiplication, clock generation, and oscillator functions in one timing IC. A clock generator is a clock-and-timing semiconductor that converts a crystal or external clock reference into a stable digital waveform for sequential digital logic. Within the timing hierarchy, the ICS501GIT is a PLL-based clock generator, which is a type of frequency generator and clock-and-timing IC. Its role is to provide a repeatable clock source to processors, communications equipment, test systems, and other digital circuits that require coordinated timing. The principal verified specifications for the ICS501GIT include a 140 MHz maximum frequency, one clock output, CMOS output technology, PLL support, and crystal or clock input. It accepts either a crystal reference or an external clock, while its nominal 1:1 input-to-output ratio simplifies designs that require frequency multiplication rather than programmable division. The 8-pin TSSOP, also identified as 8-MSOP with a 3.00 mm body width, supports compact surface-mount layouts. Its PLL architecture provides a practical alternative to relying only on a high-frequency crystal or an external oscillator module. The clock generator converts a lower-frequency reference into a higher-frequency CMOS output, reducing the component count compared with discrete oscillator and buffer arrangements. Because the public listing does not expose detailed operating, voltage, temperature, or jitter tables, those characteristics should be confirmed in the manufacturer datasheet before release to production. Typical uses include digital controller timing, embedded communications equipment, data-acquisition systems, general-purpose clock distribution, and replacement of higher-cost discrete crystal-oscillator arrangements. The device is particularly appropriate when a design needs a standard CMOS clock output, a PLL-based frequency-generation stage, and a compact 8-pin surface-mount footprint. Input and output edges remain important considerations in high-speed systems. Place the crystal, input clock, decoupling capacitor, and output routing according to the manufacturer reference layout. Keep the oscillator loop short, maintain a clean return path, and route the 140 MHz-capable clock away from high-current switching nodes. Confirm input amplitude, supply voltage, output load, and maximum operating frequency against the exact datasheet revision before production. This product page consolidates the verified ICS501GIT specifications, manufacturer documentation link, lifecycle-relevant sourcing information, compatible family references, and practical PCB guidance. The alternatives are restricted to documented TSSOP-8 clock-generator references, while the selection tables make package, brand, and compatibility differences explicit for design review.

Devis Contact
ICS501GT - 160MHz PLL Clock Generator | Renesas Electronics
ICS501GT

ICS501GT - 160MHz PLL Clock Generator | Renesas Electronics

Renesas Electronics ICS501GT is a single-circuit PLL clock generator IC with a maximum operating frequency of 160 MHz, accepting either a crystal or clock input and providing a CMOS clock output. The device is offered in an 8-TSSOP, also identified as an 8-MSOP measuring 0.118 inch by 3.00 mm wide. Its 1:1 input-to-output ratio and integrated PLL make it suitable for replacing multiple discrete crystal-oscillator functions with one clock-generation component. A clock generator IC is a timing semiconductor that converts a lower-frequency crystal or external clock into a stable, high-frequency clock required by digital systems. Clock generators occupy the Clock & Timing category and may include oscillator, PLL, frequency multiplier, divider, and buffer functions. The ICS501GT uses phase-locked-loop technology to multiply a reference frequency while providing a CMOS output suitable for digital logic and communications equipment. Principal features include a maximum frequency of 160 MHz, one internal clock-generating circuit, support for crystal or clock inputs, and CMOS output. The 1:1 ratio indicates that the nominal output follows the selected reference relationship without an integer multiplication factor other than the internally programmed PLL ratio. The single-circuit architecture simplifies designs that require only one principal clock domain and reduces the number of separate oscillator packages and interconnections. The ICS501GT is identified as a LOCO-family device, with LOCO standing for Low Cost Oscillator. Its PLL-based approach is intended to produce a high-quality, high-frequency clock from a lower-frequency crystal or clock source. The resulting CMOS output can serve digital processors, programmable logic, interface controllers, and other clocked subsystems, provided that the reference frequency, operating voltage, output loading, and timing requirements are checked against the device specifications. Typical applications include communications and networking modules, industrial control equipment, consumer electronics, embedded digital systems, and FPGA or microcontroller clock trees. In these systems, the part can centralize clock generation, reduce crystal-oscillator component count, and provide a consistent clock source to multiple sequential logic domains. The exact frequency plan must remain within the 160 MHz maximum and comply with the PLL multiplication and timing limits defined by the manufacturer datasheet. The primary design consideration is confirming the complete pin configuration and reference requirements before layout. Crystal load capacitance, grounding, output termination, supply decoupling, and unused-pin treatment all affect clock quality and reliability. Follow the manufacturer pin-description table and recommended application circuit when assigning PCB tracks, and preserve short return paths from the clock output to the load to limit susceptibility to edge degradation and crosstalk. This product page organizes the ICS501GT clock-generator specifications, package information, documented substitution candidates, application guidance, and practical design notes into one engineering-focused reference. It supports faster part identification while highlighting the decisions engineers must still verify: frequency ratio, electrical limits, pin compatibility, lifecycle suitability, and application-specific timing requirements.

Devis Contact
ICS501M - 160 MHz PLL Clock Generator | Renesas | SOIC-8
ICS501M

ICS501M - 160 MHz PLL Clock Generator | Renesas | SOIC-8

The Renesas Electronics ICS501M is a LOCO PLL clock-multiplier and clock-generator IC with a 2 MHz to 50 MHz input range and up to 160 MHz output, housed in an 8-pin SOIC package. It generates high-frequency clock signals from a lower-frequency crystal or clock input, making it useful where a board requires local frequency multiplication without relying on a full crystal oscillator. The verified product listing identifies the ICS501M as a clock-generator IC with a 160 MHz maximum output and an 8-SOIC package. A clock generator is an integrated timing device that accepts a reference clock and produces one or more clock outputs with controlled frequency and phase relationships. A PLL clock multiplier belongs to the clock and timing IC hierarchy, alongside oscillators, frequency synthesizers, phase-locked loops, and clock buffers. The ICS501M uses phase-locked-loop techniques to multiply a lower-frequency source into a higher-frequency output, reducing the need for a high-speed crystal when the downstream circuit can tolerate the device’s timing characteristics. The verified ICS501M data specifies a 2 MHz to 50 MHz input range and a maximum 160 MHz output. Its 8-pin SOIC package is a surface-mount gull-wing package, and distributor records classify the device as a clock-generator or PLL clock-multiplier IC. The available material also identifies the LOCO product family as a cost-effective way to produce high-quality high-frequency clock outputs from lower-frequency crystals or clock inputs. Detailed operating-temperature, voltage, jitter, output-waveform, and load-current values are not present in the supplied verified data. Typical design use includes communications and networking equipment, digital logic requiring a multiplied reference clock, embedded systems, instrumentation, and embedded processing platforms. The device can be placed after a stable low-frequency crystal or digital clock source when the receiving circuitry needs a higher clock frequency. Designers should verify output frequency tolerance, phase noise, supply requirements, and timing margins against the downstream load before releasing a production design. The key design consideration is that frequency multiplication is not a substitute for verifying the complete clock chain. The reference source, crystal or source impedance, PLL loop behavior, output loading, and downstream timing requirements must be checked together. Because the supplied data does not include the full electrical timing table, those parameters remain marked as data needed rather than inferred. This page combines verified distributor and manufacturer-document references, package information, application context, pricing status, and replacement-screening guidance. It is intended to support preliminary BOM research while directing engineers to the exact manufacturer datasheet for final electrical, timing, reliability, and qualification decisions.

Devis Contact
ICS501MI - 140MHz LOCO PLL Clock Multiplier | Renesas Electronics
ICS501MI

ICS501MI - 140MHz LOCO PLL Clock Multiplier | Renesas Electronics

The Renesas Electronics ICS501MI is a LOCO PLL clock multiplier that generates a high-quality, high-frequency clock output from a lower-frequency crystal or clock input. It supports input frequencies from 2 MHz to 50 MHz and provides an output clock up to 140 MHz in an 8-pin SOIC package. The device is designed to replace conventional crystal oscillators in electronic systems where a stable reference clock multiplied to a higher frequency is required. A PLL-based clock generator is a timing IC that phase-locks an output signal to a reference source and multiplies the reference frequency. In the broader clock and timing hierarchy, the ICS501MI belongs to the PLL clock-multiplier family, a type of clock and timing IC used for frequency synthesis, clock distribution, and digital system timing. Its LOCO designation reflects a low-cost oscillator architecture intended to provide economical frequency multiplication without requiring a separate high-frequency crystal resonator. The ICS501MI accepts a fundamental-mode crystal or external clock source, making it useful for processor, communication, control, and embedded digital systems. The 140 MHz maximum output frequency provides ample headroom for systems requiring a higher-frequency operating clock from a lower-cost reference. Its 8-SOIC package is compatible with conventional surface-mount PCB assembly methods and is suitable for designs where component count and board area must be controlled. The principal design consideration is ensuring that the reference crystal, external clock, feedback network, and output interface meet the timing requirements of the target system. The PLL must operate within the specified input and output frequency ranges, and the associated passive components should be placed close to the device to minimize clock noise and signal-integrity degradation. The output clock should be routed away from high-current switching nodes and noisy analog sections of the board. Typical applications include digital controller clocking, communications equipment, embedded processors, industrial control systems, and general-purpose frequency multiplication. Using a PLL multiplier can reduce the number of specialized high-frequency crystals required in a design and provide a flexible way to derive multiple system timing domains. XAIPART provides an engineering-focused product record with manufacturer documentation, package information, practical design guidance, and verified sourcing details for design review and procurement.

Devis Contact
ICS501MIT - 140MHz PLL Clock Generator | Renesas Electronics
ICS501MIT

ICS501MIT - 140MHz PLL Clock Generator | Renesas Electronics

Renesas Electronics ICS501MIT is a single-channel CMOS clock generator with a phase-locked loop, a maximum output frequency of 140 MHz, and an 8-pin SOIC package measuring 3.90 mm in width. It accepts either a crystal or external clock input and provides a 1:1 input-to-output ratio, making it suitable for generating a stable high-frequency clock from a lower-frequency reference. A clock generator is a timing IC that converts a stable reference into a usable clock signal for digital circuitry. Clock generators occupy the clock and timing branch of semiconductor devices and can incorporate a phase-locked loop, frequency multiplication, programmable dividers, and output drivers. The ICS501 family is based on the LOCO concept, intended to replace a discrete crystal oscillator in many electronic systems while retaining a compact integrated implementation. The ICS501MIT combines a maximum frequency of 140 MHz with CMOS output, PLL capability, and a 3.00 V to 5.25 V operating supply range. Its input may be a crystal or clock signal, and its nominal input-to-output ratio is 1:1. These characteristics suit digital systems that require a local timing reference without accepting the component count and assembly complexity of a discrete oscillator arrangement. At its core, the integrated PLL locks the generated output to the selected reference. Clock feedback and phase comparison allow the output frequency to remain associated with the reference while the device provides a clean CMOS clock to digital logic. Because the available data identifies a single clock generator circuit rather than multiple independently programmable outputs, the device is best treated as a focused timing solution rather than a multi-channel clock-tree component. Typical applications include communications equipment, industrial control systems, test and measurement instruments, embedded digital platforms, and general-purpose logic designs. It is particularly appropriate when the design needs a 140 MHz-capable CMOS clock, an integrated PLL, and an 8-pin surface-mount footprint. The package also permits economical PCB assembly using standard SOIC-8 manufacturing practices. Designers should select the crystal or reference frequency so that the resulting clock remains within the 140 MHz maximum and verify the input, output, and supply timing requirements against the manufacturer datasheet. Decoupling should be placed close to the supply pin, while clock routing should preserve a short return path and minimize coupling into sensitive analog or high-speed digital nets. This product page combines the ICS501MIT operating envelope, pin-compatible replacement findings, package information, and practical implementation guidance to support initial design review, sourcing, and board-level validation.

Devis Contact
ICS501MT - 160MHz PLL Clock Generator | Renesas | SOIC-8
ICS501MT

ICS501MT - 160MHz PLL Clock Generator | Renesas | SOIC-8

Renesas Electronics ICS501MT is a single-circuit PLL clock generator IC with a maximum output frequency of 160MHz, CMOS output, and an 8-SOIC package measuring 0.154 inch, or 3.90mm, in width. It accepts a crystal or clock input and provides a 1:1 input-to-output ratio. A programmable clock generator is an integrated timing device that converts a lower-frequency reference into a stable higher-frequency output. Clock generators and phase-locked loops occupy the Clock & Timing category within integrated circuits, supporting digital processing, communications, control, and data-conversion systems. The ICS501 LOCO family uses phase-locked-loop techniques to multiply a fundamental-mode crystal reference and is positioned as a cost-effective alternative to conventional crystal-oscillator arrangements in many electronic systems. The ICS501MT combines a maximum frequency of 160MHz with a CMOS output and a 1:1 multiplication ratio. Its input can be a clock or crystal, allowing it to serve systems that already have a timing reference or need a PLL-based clock output. The single-circuit arrangement simplifies designs requiring one output, while the surface-mount 8-SOIC package supports conventional PCB assembly and compact equipment layouts. At its core, the device uses PLL technology to generate a high-quality clock from a lower-frequency reference. This architecture is useful when a system needs a frequency above the practical range of a simple resonator-based oscillator without adopting a more elaborate frequency synthesizer. The documented 1:1 ratio indicates that the principal output relationship corresponds directly to the selected input and crystal configuration; system designers should consult the Renesas 501 datasheet for the exact supported input-frequency and output-frequency ranges. Typical uses include digital logic systems, embedded control equipment, communications interfaces, and test or measurement instruments requiring a distributed CMOS clock. The ICS501MT can provide a common local clock where a stable reference is available but multiple distributed logic sections need synchronized operation. Its maximum 160MHz output frequency also makes it suitable for clocking architectures operating below that upper limit. PCB implementation requires close attention to the recommended crystal or clock-input network, output routing, grounding, and decoupling. Keep the timing network and the device’s output path short, maintain a continuous ground reference, and follow the manufacturer’s layout guidance to minimize jitter and edge degradation. Confirm all timing, voltage, load, and stability limits against the complete Renesas 501 datasheet before release. This product page combines verified device characteristics, practical clocking guidance, a pin-compatible replacement assessment, and parameter-level comparisons. It is intended to accelerate engineering review while preserving the distinction between confirmed specifications and parameters that require confirmation from the full manufacturer documentation.

Devis Contact
ICS502M - 190MHz LOCO PLL Clock Multiplier | Renesas
ICS502M

ICS502M - 190MHz LOCO PLL Clock Multiplier | Renesas

Renesas Electronics ICS502M is a LOCO PLL clock multiplier that generates a high-quality clock output and reference from a low-frequency crystal or clock input. The device supports input clock frequencies from 2 MHz to 50 MHz and output clock frequencies up to 190 MHz, with a 3.0 V to 5.5 V operating-voltage range. It is packaged in an 8-pin SOIC and is designed to replace crystal oscillators in electronic systems requiring multiplied clock outputs. The low-cost oscillator architecture uses phase-locked-loop techniques and a standard fundamental-mode crystal to provide a compact frequency-multiplication solution. A clock generator, also called a clock multiplier or PLL clock generator, converts a lower-frequency reference into one or more higher-frequency timing signals. Within the broader clock and timing hierarchy, the ICS502M belongs to the oscillator family, the clock-generator family, and ultimately the timing-control IC category. Its phase-locked loop compares the reference with a divided feedback signal, adjusts the internal oscillator, and produces a stable multiplied output. This architecture makes it useful in systems needing a clock rate that is inconvenient or unavailable from a discrete crystal. Key verified features include a maximum output frequency of 190 MHz, input-frequency support from 2 MHz to 50 MHz, low jitter of 50 ps one sigma, and operation from 3.0 V to 5.5 V. The output can support 25 mA drive capability at TTL levels. Duty-cycle behavior is specified at 45/55 through 160 MHz, which is relevant when clocking TTL-compatible logic. The advanced low-power CMOS process supports portable and embedded equipment where clock generation must combine compactness with controlled power consumption. The ICS502M is suited to CPU and digital-logic clocking, communications equipment, test and measurement systems, industrial controls, and embedded platforms that can tolerate the deterministic jitter of a PLL-derived clock. Because PLL multiplication depends on the reference and feedback configuration, board-level layout, supply integrity, loop stability, and output loading can influence signal quality. The 8-pin SOIC package is straightforward to assemble but requires careful decoupling close to the supply pins and short, controlled clock routes to minimize added noise and skew. Designers should verify the required multiplication ratio, output frequency, duty-cycle limits, jitter budget, supply voltage, and downstream load before finalizing a design. They should also compare the PLL-derived output against the phase-noise requirements of any receiver, serializer, processor, or ADC. The manufacturer datasheet remains the authoritative source for programming details, timing characteristics, electrical limits, and the complete pin assignment. This page consolidates the verified manufacturer and distributor information for ICS502M, adds application-specific engineering context, and identifies same-package alternatives where the available cross-reference data supports direct replacement. It also distinguishes verified facts from parameters that still require confirmation from the complete datasheet or application-specific testing.

Devis Contact
ICS502MI - 140MHz LOCO PLL Clock Generator | Renesas Electronics
ICS502MI

ICS502MI - 140MHz LOCO PLL Clock Generator | Renesas Electronics

The Renesas Electronics ICS502MI is a LOCO PLL clock multiplier and clock generator that produces a high-quality, high-frequency CMOS clock output from a lower-frequency crystal or clock input. The device supports a maximum frequency of 140 MHz, uses PLL technology, provides one clock circuit, and is specified for differential input/output operation of No/No. It is packaged in an 8-SOIC surface-mount package measuring 0.154 inch width. The operating supply voltage range is 3 V to 5.5 V, and the specified operating temperature range is -40°C to +85°C. The ICS502MI is intended for systems that need a stable reference clock or multiplied clock output without relying on a high-frequency source directly. A LOCO PLL clock generator is a clock-and-timing integrated circuit that multiplies a low-frequency reference into a higher-frequency output. The reference can be a crystal or an external clock, and the internal PLL helps produce a higher-frequency clock for digital logic, communications, control electronics, and embedded systems. In system terms, it belongs to the clock generator and phase-locked-loop hierarchy, which sits within clock-and-timing integrated circuits and semiconductor timing-control devices. Its CMOS output is intended to drive downstream digital circuitry requiring a stable reference frequency. The ICS502MI’s main engineering characteristics include a 140 MHz maximum frequency, a 2:2 input-to-output ratio, one clock circuit, CMOS output, and PLL operation. Its 3 V to 5.5 V supply range allows use in both 3.3 V and 5 V system rails, although the clock-generation architecture and output behavior should be checked against the complete manufacturer datasheet for each board design. The -40°C to +85°C operating range covers industrial-temperature requirements commonly encountered in industrial controls, embedded equipment, communications hardware, and test systems. The 8-SOIC package supports standard surface-mount assembly and provides a practical footprint for designs that do not require a tiny BGA or QFN package. The device is identified as obsolete by the available product listing, so current supply and lifecycle planning require careful review before committing to a new production design. Engineers evaluating a replacement should compare the reference-input method, PLL configuration, output frequency range, supply voltage, pinout, package, timing characteristics, and operating-temperature requirements. A functionally similar clock generator is not automatically a drop-in replacement because reference pins, feedback configuration, output enable behavior, and output edge characteristics must match the original PCB footprint. Typical uses include generating a system reference for digital logic, providing a multiplied clock for communications equipment, and supplying a CMOS clock in embedded industrial systems. The reference source and external component values must be selected using the manufacturer’s recommended application circuit and electrical characteristics. Because this is a timing device, board layout should keep the crystal or reference input connections short, maintain a clean supply path, and provide suitable bypassing close to the device. For implementation, verify the exact pin assignment, recommended crystal load capacitance, output-drive configuration, and power-supply sequencing requirements in the manufacturer datasheet. Place decoupling capacitance close to the supply pins and route high-speed clock outputs over controlled-impedance traces when they feed sensitive digital or communications circuitry. This page summarizes the available ICS502MI specifications, lifecycle information, package data, sourcing path, and replacement-evaluation considerations.

Devis Contact
ICS502MIT - 140MHz PLL Clock Generator | Renesas | SOIC-8
ICS502MIT

ICS502MIT - 140MHz PLL Clock Generator | Renesas | SOIC-8

Renesas Electronics ICS502MIT is a LOCO PLL clock-generator IC that produces a high-quality clock output and reference from a lower-frequency crystal or clock input. The device supports frequencies up to 140 MHz and is packaged in an 8-pin SOIC measuring 0.154 inch, or 3.90 mm, in width. Its CMOS output architecture is intended for systems that require a stable high-frequency timing signal without using a high-cost dedicated clock-generation solution. A PLL clock multiplier is an integrated timing circuit that compares a reference signal with a divided version of its internally generated output, then adjusts the output until the two signals are phase and frequency aligned. In the product hierarchy, the ICS502MIT is a clock generator, a frequency synthesizer, and ultimately an integrated timing IC. Its LOCO architecture is intended to multiply a low-frequency reference into higher-frequency clock and reference outputs using fewer external components than traditional discrete frequency-generation approaches. The main specifications identify the ICS502MIT as a one-circuit PLL clock generator with crystal or clock input, CMOS output, and no differential input or output. The maximum supported frequency is 140 MHz. The documented input-to-output ratio for the MIT variant is listed as 2:2. The SOIC-8 package supports surface-mount assembly and provides a compact solution for industrial, communications, networking, test, and measurement equipment. Clock-generating ICs are useful when one low-frequency reference must be converted into a higher-frequency timing signal with predictable phase behavior. The ICS502MIT can serve as the central timing element in a clock tree or as a local clock source for digital logic, processors, interface circuits, and mixed-signal systems. Because its output is CMOS, downstream devices must be evaluated for input-voltage compatibility, rise and fall time requirements, fanout, and termination needs. Typical clock-generation applications include communications equipment, frequency conversion, digital control systems, instrumentation, and general-purpose timing subsystems. A crystal-connected implementation is appropriate when the board needs a stable frequency reference, while a clock-input implementation can support an existing system clock. In either topology, output loading, trace length, grounding, and decoupling remain critical because clock edges must reach downstream devices within their timing specifications. Design with the external crystal or reference network, supply decoupling, and output termination specified by the manufacturer datasheet. Confirm the selected reference frequency, multiplication ratio, and resulting maximum output frequency before layout. If an existing board must be changed, compare every pin, power rail, output type, and timing parameter against the original device rather than assuming that a similarly described clock generator is interchangeable. This product page consolidates the verified ICS502MIT device identity, frequency, PLL, I/O, package, and sourcing details with practical clock-tree guidance. It also distinguishes documented device characteristics from parameters that must be confirmed in the manufacturer datasheet before qualification or production release.

Devis Contact
ICS502MT - 190MHz PLL Clock Generator | Renesas Electronics
ICS502MT

ICS502MT - 190MHz PLL Clock Generator | Renesas Electronics

Renesas Electronics ICS502MT is a LOCO PLL clock generator IC that produces a high-quality, high-frequency clock output and reference from a lower-frequency crystal or clock input. The device supports operation up to 190 MHz, uses one clock-generation circuit, and is available in an 8-SOIC surface-mount package. Its supply-voltage range is 3 V to 5.5 V, making it suitable for conventional low-voltage digital and communication systems. A PLL clock generator is a clock-and-timing IC that uses phase-locked-loop technology to multiply, divide, or otherwise condition an input frequency into a stable output clock. In the broader semiconductor hierarchy, the ICS502MT belongs to clock and timing integrated circuits, clock generators, frequency synthesizers, and power-management-dependent signal-support devices. Its LOCO architecture provides a practical way to derive a higher-frequency operating clock without requiring a high-frequency external oscillator. Key features include a maximum output frequency of 190 MHz, a CMOS output, PLL operation, and support for either a crystal or external clock input. The 8-SOIC package is 0.154 inch, or 3.90 mm, wide and is supplied in tape-and-reel form for automated production assembly. A single clock-generation circuit keeps the device focused on compact systems that need one principal clock output rather than multiple independent outputs. ICS502MT can multiply a lower-frequency reference into a high-frequency clock suitable for digital logic, communications equipment, and embedded processing systems. Because PLL-based generation depends on stable reference and feedback behavior, component placement, power-supply integrity, output loading, and crystal or source selection remain important. The device's CMOS interface also requires attention to voltage levels and signal-integrity practices when driving external loads or long PCB traces. Typical uses include digital control systems, communication modules, processor clock trees, embedded platforms, and interface subsystems that require a reference-derived clock. Its single-circuit architecture is advantageous when the design needs one high-quality clock and additional logic would add unnecessary cost, board area, or power consumption. Verify the required multiplication ratio, input-frequency range, output jitter, and timing margins against the complete manufacturer documentation before committing a new design. A primary design consideration is to preserve a clean reference path from the crystal or clock source to the ICS502MT, while placing output-bypass and decoupling capacitors close to the supply pins. Follow the manufacturer's recommended crystal load capacitance and PCB layout because incorrect loading can shift frequency or impair startup. This page combines the device specifications, sourcing guidance, application context, and replacement considerations that engineers need when integrating the ICS502MT into a clock-generation design.

Devis Contact
ICS503M - 160MHz LOCO PLL Clock Generator | Renesas Electronics
ICS503M

ICS503M - 160MHz LOCO PLL Clock Generator | Renesas Electronics

The Renesas Electronics ICS503M is a 160 MHz clock generator IC and LOCO PLL clock multiplier packaged in an 8-pin SOIC measuring 3.90 mm wide. It is designed to generate a high-quality, high-frequency clock output from a low-frequency crystal or clock input. The supplied distributor record identifies the ICS503M as a clock generator with one output and an 8-SOIC package. A PLL clock multiplier is a timing IC that multiplies a lower-frequency reference into a higher-frequency clock. This clock generator belongs to the broader hierarchy of oscillator and clock ICs, frequency synthesizers, timing devices, and semiconductors. The LOCO family was designed as a cost-effective way to produce a high-quality, high-frequency clock when the source frequency is substantially lower than the required system clock. The ICS503M's primary documented specifications are its 160 MHz maximum clock-generator frequency and single-output configuration. Its 8-SOIC surface-mount package provides a compact implementation for communication, networking, industrial, and digital-system clock trees. The 3.90 mm package width is explicitly stated by the distributor listing, while additional electrical limits and detailed timing characteristics were not included in the provided verified extraction. The LOCO architecture separates clock generation from the frequency source. A low-frequency crystal or external clock can be multiplied by the internal PLL to produce the required output frequency. PLL-based generation can reduce the cost and size of the frequency reference compared with using a high-frequency resonator, although loop filter selection, reference stability, output jitter, and startup behavior must be evaluated in the target design. Typical uses include generating a high-frequency communication clock from a lower-frequency reference, supporting digital processors and programmable logic, and clocking interface or data-conversion systems. The ICS503M can also serve as a clock-tree element where one low-frequency source must be multiplied before distribution to multiple downstream circuits. Designers should confirm the complete pinout, reference-input range, output waveform, supply voltage, output drive, jitter, lock behavior, and stability requirements against the manufacturer datasheet before layout release. Because only summary distributor specifications were provided, these implementation-critical values remain deliberately unresolved rather than estimated. This page combines the verified 160 MHz, single-output, and 8-SOIC package information with traceability to the available distributor and datasheet listings. It also distinguishes confirmed data from unavailable parameters, provides application-oriented engineering context, and avoids presenting unsupported pin assignments, prices, or substitution claims as verified facts.

Devis Contact
ICS503MLF - 160MHz PLL Clock Multiplier | Renesas
ICS503MLF

ICS503MLF - 160MHz PLL Clock Multiplier | Renesas

Renesas ICS503MLF is a single PLL frequency multiplier with a maximum output frequency of 160 MHz, designed for clock-generation and frequency-synthesis applications. The device accepts a reference input in the 14 MHz to 160 MHz range, operates from a 3 V to 5.5 V supply, and is packaged in an 8-pin SOIC measuring 0.154 inch, or 3.90 mm, in width. It is a surface-mount clock-and-timing integrated circuit. A PLL frequency multiplier is a clock-and-timing semiconductor that multiplies a reference frequency to produce a higher or otherwise derived clock. Within the integrated-circuit hierarchy, a PLL multiplier belongs to clock generators and frequency synthesizers, which support clock-and-timing ICs and broader digital control systems. This type of circuit is useful when one stable reference must drive multiple digital domains, serialize parallel data, or establish a communication link at a required frequency. Key features include one PLL multiplier circuit, a maximum output frequency of 160 MHz, and an operating supply range of 3 V to 5.5 V. The 8-SOIC package offers a compact surface-mount solution, while the listed operating-temperature range of 0 °C to 70 °C places the device in the commercial temperature class. The clock and CMOS output description identifies it for systems requiring a multiplied or synthesized digital clock. The ICS503 architecture separates reference generation from frequency multiplication, allowing the device to produce a clock derived from an external source. Its 14 MHz to 160 MHz input range and 160 MHz maximum output provide substantial frequency coverage for legacy communications, control, and digital-logic equipment. Because the PLL is implemented in an integrated device, the design avoids implementing separate phase detection, charge-pump, voltage-controlled oscillator, and feedback-divider blocks on the PCB. Typical applications include legacy serial-interface clock recovery, industrial control systems, digital test equipment, communications modules, and embedded systems that require a CMOS clock beyond the available reference frequency. The device is particularly relevant when repairing or maintaining equipment designed around the Renesas or former IDT 503 clock-multiplier family rather than creating a new high-volume digital design. The primary engineering consideration is lifecycle compatibility. Current distributor listings show the exact 8-SOIC ordering code, but one technical listing also marks the family as obsolete or end-of-life. Before production commitment, verify the manufacturer lifecycle statement, exact pinout, loop-filter recommendations, input/output logic levels, and operating-temperature limits against the 503 datasheet. This product page combines the documented operating limits, package information, lifecycle considerations, application guidance, and available same-footprint alternatives. It also highlights design checks that are essential when substituting an obsolete PLL multiplier in legacy equipment.

Devis Contact
ICS503MT - LOCO PLL Clock Multiplier | Renesas | 8-SOIC
ICS503MT

ICS503MT - LOCO PLL Clock Multiplier | Renesas | 8-SOIC

The Renesas ICS503MT is a LOCO PLL clock multiplier and clock generator designed to produce a higher-frequency clock output from a lower-frequency crystal or clock input. The device is listed in an 8-SOIC surface-mount package, operates from a 3 V to 5.5 V supply, and supports a 0 °C to 70 °C operating-temperature range. It is categorized as a clock generator, PLL, frequency synthesizer, and clock/timing integrated circuit. A PLL clock multiplier is a timing semiconductor that uses phase-locked-loop technology to derive a stable output clock from a lower-frequency reference. This type of device belongs to the clock and timing IC hierarchy, alongside clock generators, frequency synthesizers, PLL-based multipliers, and other timing-control components. The ICS503MT is intended for systems that require a controlled clock relationship between an input reference and a multiplied output. The ICS503MT accepts either a crystal or clock input and produces a CMOS clock output. Its 8-SOIC package supports surface-mount assembly, while the listed reel packaging is suitable for automated production handling. The 3 V to 5.5 V operating-supply range allows use in conventional 3.3 V and 5 V digital systems when the downstream clock requirements match the device specifications. The device is identified as obsolete or end-of-life in the product information, so new designs should confirm lifecycle status and sourcing requirements before committing the ICS503MT to a production BOM. For an existing design, engineers should review the manufacturer datasheet for the exact multiplier ratios, crystal recommendations, output characteristics, timing limits, electrical limits, and package drawings before modifying the circuit. Typical uses for this device include legacy digital equipment, embedded control systems, communications equipment, and other clocked electronics that already have a validated ICS503MT board layout. The primary design consideration is preserving the original footprint and reference-source configuration; changing crystal frequency, load capacitance, supply voltage, or output loading can alter timing behavior. This page combines the listed package, electrical, environmental, lifecycle, and application characteristics with practical guidance for legacy-clock restoration and replacement assessment. It also distinguishes verified device facts from parameters that require confirmation in the manufacturer datasheet.

Devis Contact
ICS507M-01 - PECL Clock Synthesizer | Renesas | 16-SOIC
ICS507M-01

ICS507M-01 - PECL Clock Synthesizer | Renesas | 16-SOIC

Renesas ICS507M-01 is a PECL clock synthesizer and differential crystal oscillator circuit packaged in a 16-pin SOIC. It combines an external fundamental-mode crystal with internal frequency multiplication to produce a differential PECL clock. According to the Renesas 507-01 datasheet, a 10 MHz crystal connected to the ICS507-01 with the 12X output selected by S1=0 and S0=1 produces a 120 MHz PECL output clock. The part therefore serves as a clock-generation and timing IC rather than a conventional general-purpose oscillator. A crystal-based clock synthesizer provides a controlled relationship between a stable low-frequency reference and one or more higher-frequency outputs. This clock-generation approach is useful when a system needs a local timing reference without relying on a separate external clock generator. Differential PECL outputs are suited to high-speed digital interconnects because they can offer good noise immunity and signal-integrity characteristics when implemented with correct termination and routing. The ICS507-01 family supports selectable frequency multiplication, allowing a single crystal frequency to serve several clocking requirements. The documented 10 MHz-to-120 MHz example demonstrates a 12X multiplication ratio. Selection inputs S1 and S0 determine the active multiplier, while the crystal and external support components establish the operating frequency and stability. Exact output frequency ranges, tolerance limits, supply voltage, operating temperature, jitter, and output rise/fall times must be taken from the manufacturer datasheet before final design release. The 16-pin SOIC package is used in a differential clock topology that includes a crystal, supply bypass components, mode-setting inputs, and output circuitry. Layout is especially important because unequal or overly long clock traces can degrade edge quality and introduce deterministic or random jitter. Differential pair routing, solid return paths, controlled impedance, and short output connections should be treated as core layout requirements rather than optional refinements. Typical uses include telecom line-card timing, network-interface clock generation, instrumentation, test-and-measurement equipment, industrial control, and other systems requiring a local high-frequency reference clock. In each case, the crystal frequency, selected multiplier, output standard, supply requirements, and downstream receiver timing must be checked together before the component is committed to a PCB. The principal design consideration is to validate the complete clock path at the target frequency. Start with the manufacturer reference topology, use the documented crystal and termination values, and preserve symmetrical differential routing. Decoupling should be placed directly beside the supply pins, mode-selection logic must remain stable during operation, and unused outputs require the termination strategy specified by the manufacturer. The SOIC outline and pin numbering should also be checked against the specific ordering code and assembly variant used in the BOM. This page organizes the confirmed ICS507M-01 clocking characteristics, practical PCB guidance, documented multiplier example, and verified drop-in candidates into an engineering-focused selection resource. It supports early architecture and sourcing decisions while directing final component validation to the Renesas manufacturer datasheet.

Devis Contact
ICS508M - 250 MHz PECL-to-CMOS Clock Converter | Renesas
ICS508M

ICS508M - 250 MHz PECL-to-CMOS Clock Converter | Renesas

The Renesas Electronics ICS508M is a single-circuit clock converter that generates a high-quality CMOS clock output from a PECL input and supports frequencies up to 250 MHz. The device is packaged in an 8-pin SOIC measuring 3.90 mm wide, with separate VDD supply connections identified in the manufacturer documentation. It operates without a PLL, uses a 1:1 input-to-output ratio, and has one differential input section with a single-ended CMOS output. A clock converter is a clock-and-timing IC used to bridge incompatible electrical interfaces while preserving the timing information of a periodic signal. Within the broader hierarchy, a clock converter belongs to clock generation and timing ICs, alongside clock buffers, clock multipliers, dividers, phase-locked loops, and distribution devices. The ICS508M is specifically a logic-level conversion device rather than a frequency synthesizer, so its main function is interface translation instead of frequency multiplication or division. The verified headline characteristics are a maximum operating frequency of 250 MHz, PECL input, CMOS output, a 1:1 input-to-output ratio, no PLL, and one clock circuit. These features make the ICS508M useful when a system contains a high-speed PECL clock source but the receiving logic requires a CMOS-compatible clock. The 1:1 relationship means the converter does not intentionally change the fundamental clock frequency while transferring it between the two logic families. The ICS508 uses separate supply connections for its input and output sections, a characteristic that helps the two interfaces operate in their respective voltage domains. The manufacturer documentation also identifies the ICS508 as a cost-effective method for producing a high-frequency CMOS clock from a PECL source. Exact supply-voltage tolerances, input-output delay, output jitter, rise and fall time, temperature range, and package dimensions beyond the stated width were not available in the supplied verified data and therefore require confirmation from the manufacturer datasheet. Typical clock-converter applications include high-speed digital backplanes, telecommunications timing interfaces, FPGA or ASIC clock-interface conversions, and legacy systems that mix ECL-family clocking with CMOS logic. The ICS508 can also be evaluated for instrumentation and test systems where a PECL oscillator is available but the destination device expects a CMOS clock. In every case, the source and destination logic levels, voltage rails, edge-rate requirements, and system timing budget must be checked before implementation. A key design practice is to treat the PECL input and CMOS output as separate high-speed signal paths. Use short, impedance-controlled connections, minimize parasitic capacitance, provide the required local decoupling, and validate source and load termination with an oscilloscope or suitable high-bandwidth test equipment. Do not infer differential signal integrity, jitter performance, or logic thresholds from the basic frequency and interface specifications alone. This product record combines the verified distributor and manufacturer data with an explicit distinction between documented facts and missing parameters. It also identifies where application-specific companion parts may help engineers build a broader clocking system, while clearly noting that no pin-compatible replacement was verified by the supplied cross-reference results.

Devis Contact
ICS508MI - 250MHz PECL to CMOS Clock Generator | Renesas
ICS508MI

ICS508MI - 250MHz PECL to CMOS Clock Generator | Renesas

The Renesas Electronics ICS508MI is a single-channel clock generator and PECL-to-CMOS converter rated to 250 MHz, with a 1:1 input-to-output ratio, housed in an 8-pin SOIC (0.154 inch, 3.90 mm width) surface-mount package. It accepts a PECL reference clock and produces a CMOS clock output from a 2.375 V to 5.5 V supply, and it belongs to the ICS508 ClockBlocks clock generator family. A clock generator is a timing IC that produces a stable, distributed clock signal for the digital blocks of a system. A PECL-to-CMOS converter is a specialised clock-buffer function: positive emitter-coupled logic (PECL, also called ECL) is a high-speed differential-style bipolar logic standard used inside high-speed telecom and datacom equipment, while CMOS is the low-noise, low-power logic family used by most modern ASICs, FPGAs and processors. A converter of this type sits in the hierarchy clock generator > clock buffer > clock and timing IC > integrated circuit, and it is used when a design must translate an ECL/PECL domain clock onto a CMOS domain rail without adding a PLL or changing the fundamental frequency. Key features of the ICS508MI include a maximum operating frequency of 250 MHz, a single output circuit with no internal PLL, a fixed 1:1 divide ratio between input and output, and a differential-input capable interface. The device operates from a 2.375 V to 5.5 V supply and is specified in the 8-SOIC surface-mount package, with tube packing indicated by the MI ordering suffix. Architecturally the ICS508MI is deliberately simple. There is no PLL, no VCO and no programmable divider chain, so the output is a buffered and level-shifted replica of the input clock with deterministic phase behaviour and very low added jitter relative to PLL-based solutions. The ICS508 family uses separate supply pins for the PECL input side and the CMOS output side, which allows the converter to be operated at the supply level that best suits each side of the interface, such as 5 V PECL driving a 2.5 V CMOS core. Typical applications include telecom line-card and cross-connect equipment, network interface cards, SONET/SDH and Ethernet line cards, high-speed backplane distribution, test and measurement instrumentation, and any board that mixes ECL/PECL clocking with CMOS logic. The key design consideration is supply partitioning: keep the PECL and CMOS supply rails decoupled, terminate PECL inputs with the appropriate bias network, and observe the recommended output termination to avoid edge degradation at 250 MHz. This page consolidates the ICS508MI specifications, drop-in alternatives, packaging details and practical layout guidance into one reference, adding engineering context that is not in the manufacturer datasheet itself.

Devis Contact
ICS508MIT - 250 MHz PECL-to-CMOS Converter | Renesas
ICS508MIT

ICS508MIT - 250 MHz PECL-to-CMOS Converter | Renesas

Renesas Electronics ICS508MIT is a PECL-to-CMOS clock converter with a maximum operating frequency of 250 MHz, packaged in an 8-pin SOIC. The device accepts a PECL clock input and produces a high-quality CMOS clock output, providing a practical interface between differential clocking systems and conventional CMOS logic. Its one-to-one input-to-output ratio preserves the incoming clock frequency, while separate supply domains support voltage translation between the PECL input and CMOS output sections. A clock converter is a digital interface IC that translates one signaling standard into another while maintaining clock timing and frequency. In the broader semiconductor hierarchy, the ICS508MIT belongs to the clock and timing category rather than a PLL-based frequency synthesizer. It does not multiply, divide, or modulate the input clock; its primary function is level and logic-family conversion. This makes it suitable for systems in which an upstream serializer, transceiver, or other high-speed logic device generates a PECL clock but the receiving block requires a CMOS reference. The ICS508MIT supports clock frequencies from 0 Hz to 250 MHz, as identified in the manufacturer datasheet information. Its input is PECL and its output is CMOS, with a 1:1 input-to-output ratio. Separate VDD supplies allow the input and output voltage domains to be configured independently. This separation is valuable when the source device uses one PECL supply arrangement while the destination logic operates at another CMOS voltage. The device is offered in an 8-pin SOIC package and is associated with tape-and-reel ordering code MIT. Because it performs direct conversion rather than frequency synthesis, the ICS508MIT avoids the loop bandwidth, divider noise, and lock-acquisition considerations associated with PLL clock generators. Its timing performance therefore depends primarily on the quality of the incoming PECL clock and the integrity of the implemented circuit. Typical uses include high-speed communications equipment, parallel data acquisition, telecommunications backplanes, test and measurement instruments, and digital subsystems that require CMOS clocking from a PECL source. In these applications, the converter can provide a clean CMOS reference while preserving the source clock's fundamental frequency. Input and output supply decoupling, controlled-impedance routing, and correct common-mode treatment of the PECL interface remain central implementation considerations. Designers should follow the pin-description table in the manufacturer datasheet when assigning PCB tracks, and should verify signal amplitude, supply sequencing, and termination at the operating frequency. The SOIC footprint permits conventional surface-mount assembly, although package-parasitic effects and board loss become increasingly important as clock rates approach the 250 MHz upper limit. This page combines the manufacturer-family specifications, package information, sourcing structure, interface guidance, and drop-in replacement analysis to support faster engineering evaluation. Use the Request a Quote form for current commercial availability, lead time, and ordering support.

Devis Contact
ICS508MT - 250 MHz PECL-to-CMOS Clock Converter | Renesas
ICS508MT

ICS508MT - 250 MHz PECL-to-CMOS Clock Converter | Renesas

Renesas Electronics ICS508MT is a PECL-to-CMOS clock converter with a maximum operating frequency of 250 MHz, a 1:1 input-to-output ratio, and one clock channel. The device converts a differential PECL clock input into a single-ended CMOS clock output, providing a practical interface between high-speed PECL circuitry and conventional CMOS logic. It is housed in an 8-pin SOIC package measuring 3.90 mm in body width. A clock converter is an interface IC within the clock and timing hierarchy, where clock-generation and clock-buffer functions support digital logic, communications, and signal-processing systems. PECL, or positive emitter-coupled logic, is a high-speed differential signaling format, while CMOS provides a single-ended output suitable for driving conventional digital circuitry. The ICS508MT bridges these electrical domains without using a PLL. Key features include a 250 MHz maximum clock frequency, one converter circuit, a 1:1 input-to-output ratio, and separate VDD supplies for voltage translation. Differential clock input supports noise-resistant high-speed transmission, while the CMOS output provides a compatible signal for downstream digital logic. The absence of a PLL also means no multiplication or division function is added by this device. Technically, the ICS508MT is a clock translator rather than a frequency synthesizer. It preserves the input clock relationship at its output while changing the interface from differential PECL to single-ended CMOS. Separate supply domains allow the input and output circuitry to operate from different supply voltages, which is useful when connecting clock sources and logic devices that use different rail levels. Designers must still provide suitable decoupling and high-speed routing between the source, converter, and receiving logic. Typical applications include telecommunications and data-communications clock distribution, high-speed digital backplanes, FPGA clock interfaces, network equipment, and test instrumentation. The part is particularly appropriate when a board contains a PECL clock source but the receiving logic requires a CMOS-compatible clock. When designing around the ICS508MT, prioritize short, controlled impedance traces, solid grounding, and manufacturer-recommended bypass capacitors. Check that the PECL common-mode and termination arrangement matches the clock-source requirements, and verify the output supply and logic thresholds against the downstream device. This page combines the defining ICS508MT specifications, practical interface guidance, and verified drop-in alternatives. It also distinguishes the device from true clock generators and PLL-based converters so engineers can select it according to interface, frequency, packaging, and supply-domain requirements.

Devis Contact
ICS511M - 200MHz LOCO PLL Clock Generator | Renesas Electronics
ICS511M

ICS511M - 200MHz LOCO PLL Clock Generator | Renesas Electronics

Renesas Electronics ICS511M is a LOCO PLL clock generator IC designed to produce a high-quality high-frequency clock output from a lower-frequency crystal or clock input. The verified distributor information identifies the device as a 200 MHz clock generator with PLL capability, CMOS output, and an 8-SOIC surface-mount package measuring 0.154 inch, or 3.90 mm, in width. Its operating supply range is 3.135 V to 5.25 V. A clock generator is a timing IC that converts a stable low-frequency reference into a higher-frequency clock required by digital logic, communications equipment, processors, and interface circuits. A phase-locked loop, or PLL, is the feedback-based clock architecture used in the ICS511M. In this product hierarchy, ICS511M is a clock generator with PLL capability, belonging to the clock and timing IC family within integrated circuits and power-management-adjacent digital systems. The LOCO product family is intended to provide economical frequency multiplication and clock distribution functions. The principal verified specifications include a maximum frequency of 200 MHz, one clock circuit, PLL operation, clock or crystal input, and CMOS output. These characteristics make ICS511M suitable for systems that require a local high-frequency clock without using a dedicated high-speed processor clock tree. The 8-SOIC package supports conventional surface-mount assembly and is distinct from larger leaded packages. The 3.135 V minimum and 5.25 V maximum supply limits place it in a low-voltage digital supply range. The typical clock-generation topology connects a crystal or external clock source to the input, configures the PLL multiplication ratio, and feeds the resulting CMOS clock into the target digital subsystem. This arrangement can reduce the number of high-frequency clock sources required across a board while centralizing frequency generation. Compared with a free-running oscillator, the PLL approach allows the output frequency to be related to an external reference. Compared with a microprocessor that includes an internal PLL, ICS511M provides a separate timing source that can be shared by multiple functional blocks when the circuit design allows it. ICS511M can be used in communications equipment, digital control systems, embedded processing platforms, clocked logic, and industrial or consumer electronics requiring a stable high-frequency reference. Designers should verify the complete input-frequency range, output-frequency limits, jitter, duty-cycle, timing, and loop-filter requirements against the manufacturer datasheet before finalizing a design. Those parameters are not present in the supplied verified web data and must be confirmed before production use. This page combines verified distributor and manufacturer references, the available LOCO-series identification, a package-level comparison framework, and practical selection guidance. It also distinguishes verified information from parameters that require datasheet confirmation, helping engineers evaluate ICS511M without treating generic PLL or clock-generator claims as part-specific facts.

Devis Contact
ICS511MI - 160MHz Single PLL Clock Generator | Renesas
ICS511MI

ICS511MI - 160MHz Single PLL Clock Generator | Renesas

The Renesas Electronics ICS511MI is a single-phase-locked-loop clock generator with a maximum operating frequency of 160 MHz, clock or crystal input, and CMOS output in an 8-pin SOIC package. Its 1:1 input-to-output ratio and low-cost LOCO architecture are designed for generating a high-quality clock output from a lower-frequency crystal or clock source. A clock generator is an integrated timing device that converts a reference clock or crystal into one or more stable timing signals. Within the broader semiconductor hierarchy, the ICS511MI is a PLL clock generator, a clock and timing IC, and ultimately a power-management-adjacent frequency-generation component. Its single-channel structure simplifies designs that require a local high-frequency clock rather than a more complex multi-output timing architecture. The ICS511MI provides a maximum operating frequency of 160 MHz, accepts either clock or crystal input, and produces a CMOS output. The listed input-to-output ratio is 1:1, indicating that the generated output frequency corresponds directly to the supplied reference relationship. Its operating temperature range extends from -40°C to +85°C, allowing operation across industrial temperature environments when the external reference and load conditions meet the device requirements. Internally, the device uses a single PLL to multiply or organize a lower-frequency reference into a higher-frequency clock. This approach offers a practical alternative to relying solely on a high-frequency external oscillator when the system requires a locally generated, specified timing signal. The one-circuit implementation also reduces board area compared with solutions containing several clock-generation channels. Typical applications include communication equipment, digital signal-processing systems, frequency conversion, clock multiplication, and general digital subsystems requiring a local CMOS clock. The ICS511MI is particularly relevant to compact designs where an 8-pin surface-mount package and a single clock output are preferred over a larger multi-channel timing device. Designers should select the reference frequency and external loop-filter components according to the manufacturer recommendations, then verify output jitter and acquisition behavior across the intended frequency range. Board layout should keep the crystal or clock path short, provide a clean return path, and place support components close to the device to reduce susceptibility to noise and parasitic feedback. This product page combines the ICS511MI device identity, verified operating parameters, packaging information, drop-in comparison candidates, and practical design guidance. It also highlights the distinctions that matter when evaluating clock-frequency range, package compatibility, reference input method, and application suitability before making a replacement decision.

Devis Contact
ICS511MIT - 160MHz PLL Clock Multiplier | Renesas | 8-SOIC
ICS511MIT

ICS511MIT - 160MHz PLL Clock Multiplier | Renesas | 8-SOIC

The Renesas ICS511MIT is a PLL-based clock generator and clock multiplier with a maximum operating frequency of 160 MHz, supplied in an 8-SOIC surface-mount package. It is designed to derive a multiplied clock from an external clock or crystal reference for precision timing systems. The IC is listed as an obsolete product, so designers should confirm availability, lifecycle status, and any last-time-buy terms before starting a new production design. A PLL clock multiplier belongs to the clock and timing IC family. Unlike a simple logic inverter or buffer, it uses a phase-locked loop to lock an internal or output frequency to a stable reference and multiply that reference by an integer ratio. Clock generators and frequency synthesizers sit within the broader timing-control hierarchy used to coordinate processors, transceivers, memory, and data-conversion equipment. The primary identified characteristics are a 160 MHz maximum clock frequency, a PLL clock-multiplier function, and an 8-SOIC package measuring 0.154 inch, or 3.90 mm, in body width. The ICS511MIT is also described as a high-frequency clock generator intended for precision applications. Its supported input sources are identified as a clock or crystal, and it belongs to the ICS511 series. Because the device is obsolete, lifecycle planning is more important than headline performance differences. An existing design can often continue using the same ICS511 family pin arrangement, but a clock source is a board-level dependency: replacement parts must reproduce the reference frequency, output frequency range, output drive, and pin mapping. A nominal maximum frequency alone does not guarantee timing compatibility with an existing circuit. Typical uses include precision frequency multiplication in communications equipment, clock distribution for high-speed digital subsystems, test and measurement instrumentation, and timing architectures that require a derived clock rather than a free-running oscillator. In such systems, the PLL output replaces or supplements a lower-frequency reference while preserving phase coherence with the reference source. When laying out a board, route the reference input and clock outputs away from noisy switching nodes and provide a stable ground reference beneath the device. Keep clock traces short, use controlled-impedance routing when operating at high edge rates, and confirm the exact output-divider and feedback configuration against the manufacturer datasheet before releasing a new layout. This page combines the identified device characteristics, lifecycle information, cross-reference results, and practical clock-tree guidance. It also documents the limitations of an obsolete timing IC so procurement and engineering teams can assess redesign risk rather than relying on a headline frequency rating alone.

Devis Contact
ICS511MT - 200MHz PLL Clock Generator | Renesas Electronics
ICS511MT

ICS511MT - 200MHz PLL Clock Generator | Renesas Electronics

The Renesas Electronics ICS511MT is a single-output PLL clock generator IC designed to produce a high-frequency CMOS clock from a lower-frequency crystal or clock input, with a maximum output frequency of 200 MHz. It is packaged in an 8-pin SOIC measuring 3.90 mm wide. The ICS511MT is identified as a LOCO PLL clock multiplier, a clock-generation approach used to multiply a reference clock while providing a stable, high-quality output for digital systems. A PLL clock generator, also called a frequency multiplier or clock synthesizer, belongs to the clock and timing IC category. It uses a phase-locked loop to derive an output frequency from a reference source. The reference can be a crystal oscillator or external clock, and the generated CMOS output is suitable for systems requiring a higher-frequency operating clock than the source provides. Key features of the ICS511MT include PLL clock multiplication, a maximum frequency of 200 MHz, one clock circuit, CMOS output, and support for both crystal and clock inputs. The 1:1 input-to-output ratio is listed for the device, while the PLL architecture provides a practical route to generating a high-frequency clock from a lower-frequency reference. Its single-circuit configuration suits designs requiring one multiplied clock rather than multiple independently generated outputs. Technically, the ICS511MT is intended for clock generation where the output must be derived from a stable reference. The use of a crystal input supports designs that require predictable frequency behavior, while clock input support allows the device to operate from an existing system reference. The CMOS output interface makes it relevant to digital logic, processor, communications, and embedded-control systems requiring a high-speed clock signal. Typical applications include clocking for digital processors, communications equipment, test and measurement systems, embedded control platforms, and general-purpose digital logic. The device can reduce the need for multiple external clock-generation solutions when a single high-frequency CMOS clock is sufficient. Its principal benefit is clock multiplication in a small 8-SOIC package, although board-level stability, jitter, supply requirements, and output-drive limits must be checked against the manufacturer datasheet before finalizing a design. For PCB implementation, place the device close to the crystal, decoupling capacitors, and clock-consuming circuits to minimize trace length and noise pickup. Follow the manufacturer’s recommended crystal load-capacitance network, provide stable supply decoupling, and route the output as a short, controlled-impedance clock trace. Confirm pin orientation, operating limits, and crystal requirements directly from the manufacturer datasheet and the package drawing. This product summary combines the device’s identified LOCO PLL architecture, 200 MHz maximum frequency, CMOS output, input options, package format, sourcing context, and practical clock-tree design considerations to support faster component selection and PCB planning.

Devis Contact
ICS512M - 200MHz Clock Generator | Renesas Electronics
ICS512M

ICS512M - 200MHz Clock Generator | Renesas Electronics

The Renesas Electronics ICS512M is a 200 MHz clock generator IC with a PLL and bypass function, supplied in an 8-pin SOIC package measuring 0.154 inch, or 3.90 mm, in width. The listed device provides one clock-generation circuit, accepts a clock or crystal input, produces a CMOS output, and supports a 1:2 input-to-output ratio. According to the supplied distributor and manufacturer listings, its core function is to generate a high-quality, high-frequency clock output and a reference clock from a lower-frequency crystal or clock source. A PLL clock generator is a clock-and-timing integrated circuit that multiplies or organizes an input reference into one or more system clock outputs. Its place in the broader hierarchy is PLL clock generator > clock generator > clock and timing IC > integrated circuit. The ICS512M is therefore used when a system needs a more stable, controlled, or distributed clock derived from a lower-frequency source, especially where crystal and clock reference generation must share one compact device. The verified listing identifies the ICS512M as a 200 MHz clock generator with PLL bypass, crystal or clock input, CMOS output, one circuit, and a 1:2 ratio. These characteristics make it applicable to communication hardware, RF systems, digital boards, clock generation, timing distribution, and synchronization. The 8-SOIC surface-mount package supports compact designs where a through-hole clock generator would be unnecessarily large. The PLL architecture allows the device to produce a high-frequency output from a lower-frequency crystal or reference clock while retaining a bypass path for direct clocking. This architecture is useful when the design needs both a reference source and a multiplied clock without implementing multiple separate timing components. The 1:2 ratio is the most specific verified functional detail for the ICS512M, while other device parameters are not stated in the supplied search data. Typical uses include generating reference and operating clocks for communication equipment, synchronizing digital subsystems, supporting RF signal-chain timing, and furnishing a CMOS clock to board-level logic. In a multi-clock system, the device can reduce the number of discrete oscillator and divider blocks, but the final loop-filter, crystal, decoupling, and output-loading design must follow the manufacturer datasheet before production release. The primary design consideration is to confirm the exact input range, output waveform, jitter, operating temperature, and bypass behavior against the Renesas ICS512 datasheet. Engineers should also validate startup, crystal loop stability, and output loading in the intended PCB environment because those values are not fully provided in the retrieved search snippets. This page consolidates the verified Renesas and distributor information, separates confirmed specifications from missing datasheet parameters, identifies same-family drop-in candidates, and adds practical procurement and design guidance for engineers evaluating ICS512M clock-generation requirements.

Devis Contact