Produits (39 000+)

LPC11E67JBD48K - 32-Bit 50MHz Cortex-M0+ MCU | NXP
LPC11E67JBD48K

LPC11E67JBD48K - 32-Bit 50MHz Cortex-M0+ MCU | NXP

NXP Semiconductors LPC11E67JBD48K is a 32-bit ARM Cortex-M0+ microcontroller operating up to 50 MHz, with 128 KB of Flash memory and a 48-LQFP 7 x 7 mm package. It belongs to the LPC11Exx family, a scalable entry-level MCU range designed to replace 8-bit and 16-bit designs while retaining a simple instruction set and efficient code footprint. The verified manufacturer listing identifies this orderable variant as active. A microcontroller is an integrated circuit containing a processor core, program Flash, data memory, peripherals, and interface logic on one semiconductor device. The ARM Cortex-M0+ core provides a compact instruction set and deterministic embedded-control architecture. Within the product hierarchy, the LPC11E67JBD48K is an ARM-based microcontroller, an embedded processor, and a semiconductor intended for cost-sensitive control applications. The LPC11E67JBD48K combines a maximum 50 MHz operating frequency with 128 KB of Flash organized as 128K x 8. This combination supports firmware storage while avoiding the memory cost and board area of a larger microcontroller package. The 48-LQFP 7 x 7 mm package offers a surface-mount solution with a comparatively compact body, although its lead pitch must be accommodated by the PCB land pattern and assembly process. The LPC11Exx family also includes devices with up to 256 kB Flash, 36 kB SRAM, and 4 kB EEPROM according to the verified datasheet listing. A 12-bit ADC is identified in the same source. Device-specific ADC, SRAM, EEPROM, clock, and peripheral details must be confirmed in the manufacturer datasheet before assigning pins or calculating firmware resource requirements. Typical uses for this microcontroller class include compact industrial controllers, building and access-control equipment, appliance controls, sensing nodes, and low-cost embedded products. The 50 MHz Cortex-M0+ performance is useful for responsive control loops and moderate protocol handling, while the 128 KB Flash capacity allows application firmware and configuration data to be stored locally. Designers should verify the exact LPC11E67JBD48 pin assignments, peripheral multiplexing, clock limits, decoupling requirements, and exposed-pin treatment in the NXP datasheet. The verified web results do not provide a complete public pin table, so this record does not infer pin names or provide a fabricated package diagram mapping. PCB design and firmware bring-up should also account for the LQFP lead geometry rather than a leadless QFN footprint. This product record combines current NXP lifecycle information, distributor inventory and pricing evidence, family-level technical data, strict data-availability markers, and procurement guidance. It distinguishes verified device facts from parameters that still require confirmation, helping engineers avoid treating broader LPC11Exx family capabilities as guaranteed LPC11E67JBD48K specifications.

Devis Contact
LPC11E67JBD64E - 50MHz Cortex-M0+ 128KB MCU | NXP
LPC11E67JBD64E

LPC11E67JBD64E - 50MHz Cortex-M0+ 128KB MCU | NXP

NXP Semiconductors LPC11E67JBD64E is a 32-bit ARM Cortex-M0+ microcontroller with a 50 MHz maximum CPU frequency, 128KB of flash memory, and 20KB of SRAM in a 64-pin LQFP package measuring 10 mm by 10 mm. It belongs to the LPC11Exx scalable entry-level MCU family, combining an efficient ARM Cortex-M0+ core with embedded flash, SRAM, and mixed-signal peripherals in one compact surface-mount package. An ARM Cortex-M0+ microcontroller is a compact embedded-processing device used to execute firmware, read sensors, control outputs, and manage communication peripherals. The LPC11Exx family sits within the broader hierarchy of microcontroller, embedded processor, semiconductor, and embedded-control systems. Its 32-bit architecture provides an efficient platform for cost-sensitive products requiring deterministic real-time control without the resources of a higher-performance Cortex-M processor. The LPC11E67JBD64E provides 128KB of flash for program storage and 20KB of SRAM for data, stack, and working memory. Its maximum CPU frequency is 50 MHz. The device is supplied in a 64-LQFP package, providing 64 external pins for power, ground, resets, clock inputs, and peripheral connections. The verified distributor information also identifies the device as a 3.3 V part and as a member of the LPC11Exx family. Detailed GPIO allocation, operating-temperature limits, and individual peripheral characteristics remain subject to the manufacturer datasheet. The ARM Cortex-M0+ core supports a compact instruction set optimized for embedded control, while the integrated memory allows firmware and working data to share a single package and PCB footprint. This integration reduces component count and simplifies board routing compared with a discrete processor-plus-memory implementation. The 50 MHz operating rate provides useful headroom for protocol handling, digital control loops, and supervisory tasks while maintaining a low-complexity architecture. Typical uses include industrial control modules, sensor-hub boards, communication equipment, building automation, appliance controllers, and compact embedded data-acquisition products. The 128KB flash capacity is suitable for moderate firmware images, while 20KB SRAM supports networking stacks and control buffers without requiring external memory. Its 64-LQFP package also makes the device accessible for prototype assembly and conventional surface-mount manufacturing. Designers should verify the complete pin assignment, peripheral multiplexing, and electrical limits against the manufacturer datasheet before layout release. The 3.3 V supply requirement should be paired with appropriate decoupling and signal-level planning for connected modules. Because exact GPIO, timing, temperature, and qualification data were not included in the verified results, those values should not be inferred from the family description alone. This product record combines verified distributor specifications, official manufacturer identification, package information, sourcing references, and engineering-focused selection guidance. It also distinguishes the LPC11E67JBD64E from higher-memory family variants and documents the limited number of confirmed pin-compatible alternatives rather than presenting unverified substitutes as drop-in devices.

Devis Contact
LPC11E68JBD48K - 50MHz Cortex-M0+ 256KB MCU | NXP
LPC11E68JBD48K

LPC11E68JBD48K - 50MHz Cortex-M0+ 256KB MCU | NXP

The NXP LPC11E68JBD48K is a 32-bit ARM Cortex-M0+ microcontroller operating up to 50 MHz, with 256 KB of flash memory and 36 KB of SRAM in a 48-LQFP 7 x 7 mm package. It combines a compact general-purpose MCU architecture with integrated connectivity and embedded-control features for cost-sensitive embedded systems. A microcontroller is a semiconductor device that integrates a CPU core, program memory, data memory, peripherals, and interface controllers on one package. The LPC11E68 belongs to the LPC11Exx family, a low-cost 32-bit MCU platform intended to replace conventional 8-bit and 16-bit designs while providing higher processing performance, efficient code density, and broader peripheral integration. Key device characteristics include a 50 MHz ARM Cortex-M0+ core, 256 KB of flash for firmware, 36 KB of SRAM for working data, and a 48-LQFP package. The 2.4 V to 3.6 V operating range supports common embedded supply rails, while the compact 7 x 7 mm package supports space-constrained control boards. The LPC11Exx family also targets low-power operation and energy-efficient processing for embedded-control applications. The LPC11Exx architecture uses the ARM Cortex-M0+ instruction set, which provides deterministic 32-bit processing while maintaining code density appropriate for small embedded systems. Its combination of flash, SRAM, serial interfaces, timers, and GPIO allows one device to consolidate functions that might otherwise require several discrete controllers. The LPC11U68 member of the family adds configurable USB connectivity, making it especially relevant when USB connectivity is required. Typical uses include industrial control modules, sensor hubs, building automation controllers, compact instrumentation, appliance controls, and connected low-power peripherals. The 256 KB flash capacity accommodates more complex control firmware and protocol stacks than many entry-level 8-bit controllers, while 36 KB of SRAM provides working space for buffering, state management, and communication routines. Designers should treat the 2.4 V to 3.6 V supply range as the primary electrical boundary and verify every external signal and peripheral setting against the NXP datasheet. PCB layout should provide a stable ground reference, decouple the supply pins near the device, and preserve the package footprint and exposed thermal-pad requirements defined for the selected ordering configuration. This page combines the LPC11E68JBD48K family positioning, exact-ordering details, interface guidance, engineering trade-offs, and verified sourcing information to support faster component selection and PCB design. It also highlights the LPC11U68JBD48K as the closest USB-equipped family comparison for designs that require that connectivity.

Devis Contact
LPC11E68JBD64E - 50MHz Cortex-M0+ MCU, 256KB Flash | NXP
LPC11E68JBD64E

LPC11E68JBD64E - 50MHz Cortex-M0+ MCU, 256KB Flash | NXP

The NXP Semiconductors LPC11E68JBD64E is a 32-bit Arm Cortex-M0+ microcontroller operating up to 50 MHz, with 256 KB of flash memory and 36 KB of SRAM, housed in a 64-LQFP 10 mm × 10 mm package. It is designed for compact embedded systems that require efficient 32-bit processing, substantial code storage, and a broad set of mixed-signal peripherals. The LPC11Exx family combines a simple instruction set, low-power operation, and integrated analog and communication functions in a cost-focused architecture. An Arm Cortex-M0+ microcontroller is a 32-bit embedded processor built around the Armv6-M instruction set. Compared with an 8- or 16-bit controller, the LPC11Exx architecture provides larger addressing capability and more efficient handling of complex control logic. The LPC11E68JBD64E occupies the microcontroller hierarchy as a general-purpose embedded controller with integrated flash, SRAM, analog conversion, timers, serial interfaces, and communication peripherals. Its 50 MHz operating frequency supports responsive control while retaining a compact, low-power design profile. The principal device characteristics include up to 50 MHz CPU operation, 256 KB of flash, 36 KB of SRAM, and 4 KB of EEPROM. A 12-bit ADC supports analog measurement, while the family architecture provides communication capabilities suited to embedded control, sensor acquisition, and connected equipment. The LPC11Exx family was created for applications replacing 8- and 16-bit controllers when greater arithmetic capability, peripheral integration, and reduced firmware complexity are valuable without requiring a higher-tier application processor. The 64-LQFP package provides 64 externally accessible positions and a 10 mm × 10 mm footprint. This relatively large leaded package is suitable for conventional through-hole assembly, prototypes, and designs that benefit from inspectable leads rather than a fine-pitch land pattern. Board layout must preserve access to the ADC inputs, oscillator connections, reset circuitry, programming interface, power rails, decoupling, and all other pins defined in the manufacturer pin-description table. Typical uses include industrial sensing and control, building automation, appliance control, low-cost instrumentation, portable equipment, and embedded subsystems requiring local analog measurement and serial communications. The combination of 256 KB flash and 36 KB SRAM is useful when application firmware, configuration tables, diagnostics, and communication buffers must coexist without external memory. A key design consideration is firmware and peripheral planning. Allocate the ADC pins according to analog-channel requirements, follow the recommended decoupling arrangement, and keep sensitive analog traces away from fast switching nodes. Confirm startup, reset, and programming requirements against the manufacturer datasheet before releasing a PCB. Migration between LPC11Exx devices should also account for differences in USB, memory, peripheral, and temperature-grade options rather than relying on package similarity alone. This page consolidates the confirmed device identity, core memory and timing specifications, package information, sourcing workflow, application context, and verified drop-in alternatives. It also highlights the engineering checks that distinguish a true pin-compatible replacement from a merely similar 64-LQFP microcontroller.

Devis Contact
LPC11U66JBD48E - 50MHz Cortex-M0+ 64KB MCU | NXP
LPC11U66JBD48E

LPC11U66JBD48E - 50MHz Cortex-M0+ 64KB MCU | NXP

NXP Semiconductors LPC11U66JBD48E is a 32-bit Arm Cortex-M0+ microcontroller rated for operation up to 50 MHz, with 64 KB of flash memory in a 48-pin LQFP 7 x 7 mm package. It belongs to the LPC11Uxx family of low-cost, energy-efficient microcontrollers designed as scalable replacements for conventional 8-bit and 16-bit embedded systems. A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, peripherals, and communication interfaces on one device. The Cortex-M0+ core provides a simple instruction set and compact code footprint, while the LPC11Uxx family combines this processing efficiency with flexible low-power features for embedded control, sensing, and communications equipment. The LPC11U66 provides 64 KB of flash, 12 KB of SRAM, and a maximum CPU frequency of 50 MHz. Its flexible peripheral set is intended to replace several discrete components in cost-sensitive embedded products. The 48-LQFP package exposes the integrated communications and general-purpose peripherals required by protocols, sensors, human-interface equipment, and low-power control systems. The Arm Cortex-M0+ architecture also supports efficient event-driven firmware, helping developers balance processing performance, code density, and energy use. Compared with an 8-bit MCU, the 32-bit processor provides a wider address space and more capable interrupt-driven control. Compared with higher-end Cortex-M systems, the LPC11U66 maintains a low-cost positioning without abandoning 32-bit software development tools. Typical uses include compact industrial controllers, connected sensor nodes, building-control modules, appliance control boards, communications equipment, and embedded access devices. The 48-LQFP package is appropriate for designs that need a moderate number of externally routed pins and a conventional leaded footprint that is easier to inspect and assemble than very fine-pitch packages. Designers should verify the complete pin assignment, peripheral multiplexing, clock configuration, and power requirements against the NXP datasheet before layout release. A stable decoupling network and correct programming-tool configuration are essential for reliable operation. The manufacturer product page identifies LPC11U66JBD48 as active, while distributor listings provide sourcing and packaging information. This page consolidates verified manufacturer information, distributor availability, practical selection guidance, and same-package alternatives for engineers evaluating the LPC11U66JBD48E. It also distinguishes confirmed source data from parameters that still require verification against the full manufacturer datasheet.

Devis Contact
LPC11U67JBD48E - 50MHz 128KB Flash MCU | NXP | USB Cortex-M0+
LPC11U67JBD48E

LPC11U67JBD48E - 50MHz 128KB Flash MCU | NXP | USB Cortex-M0+

NXP Semiconductors LPC11U67JBD48E is a 32-bit ARM Cortex-M0+ microcontroller operating up to 50MHz, with 128KB of Flash memory, 20KB of SRAM, USB connectivity, and a 12-bit ADC in a 48-LQFP (7x7) package. It is designed for cost-sensitive embedded systems that need efficient 32-bit control, flexible peripherals, and USB communication without the power and complexity of a higher-performance Cortex-M core. The LPC11Uxx family belongs to the microcontroller hierarchy: MCU > embedded processor > Arm Cortex-M0+ microcontroller > low-power embedded control. The Cortex-M0+ architecture provides a simple instruction set and efficient code density while retaining a 32-bit processing model. At up to 50MHz, the LPC11U67JBD48E is suitable for connected peripherals, human-interface systems, sensor controllers, and compact consumer or industrial equipment. Verified listings identify 128KB Flash, 20KB SRAM, USB, and a 12-bit ADC. The 48-LQFP (7x7) package provides a conventional leaded footprint that can simplify assembly and prototyping compared with a fine-pitch ball grid array. The 2.4V to 3.6V operating range supports common 3.3V system rails, although the complete electrical limits must be confirmed in the manufacturer datasheet before final design release. The USB capability makes the device useful for USB-to-serial adapters, configuration interfaces, HID peripherals, data acquisition controllers, and service ports. Its ADC supports applications that monitor analog sensors or industrial inputs without requiring a separate converter. The combination of 128KB Flash and 20KB SRAM gives embedded software room for protocol stacks, control logic, buffers, and application code. A typical design places the MCU beside its USB connector, 3.3V regulator, decoupling capacitors, crystal or clock source, and application peripherals. Keep USB differential routing short, controlled-impedance, and away from noisy switching nodes. Confirm oscillator, reset, USB, and peripheral pin assignments against the official datasheet before PCB routing. This page combines verified distributor specifications, sourcing information, application guidance, and same-footprint alternatives for engineering evaluation.

Devis Contact
LPC11U67JBD64E - 50MHz Cortex-M0+ 128KB MCU | NXP
LPC11U67JBD64E

LPC11U67JBD64E - 50MHz Cortex-M0+ 128KB MCU | NXP

The NXP LPC11U67JBD64E is a 32-bit ARM Cortex-M0+ microcontroller operating at up to 50 MHz, with 128 KB of flash memory and a 64-lead LQFP package measuring 10 mm by 10 mm. The LPC11U67JBD64E belongs to NXP's LPC11Uxx scalable entry-level microcontroller family, combining an economical embedded processor with integrated USB and other connectivity-oriented peripherals. A microcontroller is a semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces into one device. The ARM Cortex-M0+ core provides a compact, energy-efficient architecture for embedded control, while the LPC11Uxx family sits within the broader hierarchy of microcontroller, embedded processor, and semiconductor products. Its 50 MHz operating frequency supports responsive control loops and communication handling without requiring a high-end application processor. The verified device data identifies a 32-bit ARM Cortex-M0+ processor, 128 KB (128K x 8) flash, and a 64-LQFP (10 x 10 mm) package. The E suffix is retained as part of the exact orderable MPN. NXP describes the family as scalable and entry-level, indicating suitability for designs that need broad peripheral integration while controlling system complexity, board area, and cost. Compared with larger Cortex-M microcontrollers, the LPC11U67JBD64E provides a focused 50 MHz Cortex-M0+ platform with 128 KB of embedded flash in a 10 mm square LQFP. The 64-pin package offers more external interface options than smaller lead-count packages, making it useful when a design requires both USB connectivity and additional I/O. Exact SRAM capacity, voltage range, peripheral inventory, and electrical limits require confirmation in the manufacturer datasheet. Typical applications include USB-connected control devices, USB-to-serial adapters, human-interface-interface controllers, compact industrial controllers, instrument-panel controllers, and embedded USB peripherals. The 64-pin package can support a mix of communication, logic, and discrete I/O, while the Cortex-M0+ core handles protocol stacks, sampling, and supervisory tasks in a single device. Designers should verify the exact pin assignments, USB electrical requirements, decoupling network, clock configuration, and exposed programming/debug interfaces against the manufacturer datasheet before layout release. PCB traces, connectors, and protection components must be designed for the device's USB and power specifications. Because no complete public pinout was included in the supplied verified data, no pin-level substitutions should be inferred from this page. This product record combines exact distributor pricing and availability information, same-package family comparisons, and practical engineering guidance. It distinguishes verified facts from parameters that still require datasheet confirmation, helping engineers source the exact LPC11U67JBD64E without confusing a related LPC11E-series device with a guaranteed drop-in replacement.

Devis Contact
LPC11U68JBD48K - 50MHz Cortex-M0+ MCU | NXP | USB
LPC11U68JBD48K

LPC11U68JBD48K - 50MHz Cortex-M0+ MCU | NXP | USB

The NXP Semiconductors LPC11U68JBD48K is a 32-bit Arm Cortex-M0+ microcontroller operating up to 50 MHz, with 256 KB of flash memory, 36 KB of SRAM, 4 KB of EEPROM, and USB connectivity in a 48-pin LQFP package measuring 7 mm by 7 mm. The device also includes a 12-bit ADC and is specified for an operating temperature range of -40 °C to +105 °C. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one component. The LPC11U68 belongs to NXP's LPC11Uxx family, a low-cost family based on Arm Cortex-M0+ and Cortex-M0 cores. This MCU family targets control and embedded applications that need 32-bit processing, compact code size, low power consumption, and deterministic peripheral operation without the cost and complexity of a higher-performance processor. The LPC11U68JBD48K combines a 50 MHz Cortex-M0+ core with 256 KB of on-chip flash and 36 KB of SRAM. Its 4 KB EEPROM provides nonvolatile storage for parameters, calibration values, or configuration data. USB support makes the device suitable for USB-connected peripherals, while the 12-bit ADC supports analog measurement from sensors, potentiometers, and resistive divider networks. The extended -40 °C to +105 °C temperature range also permits operation across industrial temperature environments. The 48-LQFP package provides a practical option for through-hole assembly and prototype development because its leads are inspectable and accessible on a conventional PCB. Its 7 mm by 7 mm body is larger than the smallest microcontroller packages, but it simplifies hand soldering, signal probing, and rework. Board planners must preserve the manufacturer's land pattern and observe the specified pin, clearance, and soldering requirements. Typical uses include industrial control modules, USB-to-serial or USB-connected data-acquisition equipment, compact sensor interfaces, building-control nodes, and low-cost embedded products. In an analog measurement design, the 12-bit ADC can acquire sensor signals while the Cortex-M0+ core performs filtering, calibration, and data packaging. In a USB peripheral, the integrated USB interface can reduce external connectivity requirements while the MCU manages the application protocol. Design consideration: verify the operating voltage, peripheral pin multiplexing, USB electrical requirements, clock configuration, and programming interface against the manufacturer datasheet before finalizing the PCB. Use the specified decoupling and programming-interface layout, and account for every alternate-function pin used by the application. This page consolidates the manufacturer specifications, commercial inquiry workflow, package information, application guidance, and cross-reference status for LPC11U68JBD48K into one engineering-focused reference.

Devis Contact
LPC11U68JBD64K - 50MHz Cortex-M0+ 256KB MCU | NXP
LPC11U68JBD64K

LPC11U68JBD64K - 50MHz Cortex-M0+ 256KB MCU | NXP

NXP Semiconductors LPC11U68JBD64K is an entry-level 32-bit embedded microcontroller based on Arm Cortex-M0+ and Cortex-M0 cores, operating at up to 50 MHz and providing 256 KB of flash memory in a 64-LQFP package measuring 10 mm by 10 mm. The device is positioned as a low-cost migration path from 8-bit and 16-bit microcontroller designs while retaining a 32-bit architecture, a compact instruction set, and flexible configuration. A microcontroller is a semiconductor integrated circuit that combines a processor core, program memory, data memory, and peripherals on one die. In the product hierarchy, the LPC11U68JBD64K is an embedded microcontroller, then a 32-bit microcontroller, and ultimately a general-purpose semiconductor. The Arm Cortex-M0+ architecture is designed for compact embedded-control code, while the presence of Cortex-M0-compatible family information supports simple control-oriented product designs. The principal verified characteristics are a maximum CPU frequency of 50 MHz, 256 KB of flash, a 32-bit CPU, Arm Cortex-M0+/M0 family architecture, and a 64-LQFP surface-mount package. The NXP product page identifies LPC11U68JBD64 as active. This combination makes the LPC11U68JBD64K relevant to embedded control, IoT device, industrial automation, motor-control, metering, and low-power board applications where a compact 32-bit control platform is required. The LPC11Uxx family is intended to replace conventional 8-bit and 16-bit microcontroller implementations with a more capable 32-bit architecture. Its operating frequency of up to 50 MHz provides additional processing headroom for protocol handling, control logic, and state management, while the simple Arm instruction set can reduce software complexity compared with more elaborate embedded processor architectures. Exact RAM, peripheral, voltage, and timing details must be confirmed in the manufacturer datasheet before schematic or firmware design begins. Typical application opportunities include smart metering, connected sensors, compact industrial controllers, motor-control supervisory logic, appliance controls, and low-power IoT nodes. In these systems, the 256 KB flash capacity accommodates a bootloader, application firmware, configuration data, and protocol code. The 10 mm by 10 mm LQFP package also supports conventional surface-mount assembly while providing more exposed perimeter pins than a small leadless package. Designers should use the official NXP data sheet as the controlling source for pin assignment, power requirements, clocking, peripherals, programming, and package dimensions. The LPC11U68JBD64K is supported by the NXP LPC11U00 CMSIS device family package, providing a defined software-device and peripheral baseline for embedded toolchains. This product page consolidates verified manufacturer and distributor information, pricing availability, package details, datasheet links, application context, and design cautions. It also distinguishes confirmed specifications from unavailable data rather than estimating missing electrical or pin-level values, helping engineers make a safer sourcing and design decision.

Devis Contact
LPC1311FHN33 - 72MHz Cortex-M3 MCU, 8KB Flash | NXP
LPC1311FHN33

LPC1311FHN33 - 72MHz Cortex-M3 MCU, 8KB Flash | NXP

The NXP Semiconductors LPC1311FHN33 is an entry-level 32-bit Arm Cortex-M3 microcontroller with up to 72 MHz CPU frequency, up to 8 kB of flash memory, and up to 2 kB of data memory in a 33-pin HVQFN package. Its peripheral complement includes one Fast-mode Plus I2C interface, one UART, and four general-purpose 16-bit timers, making it suitable for cost-sensitive embedded control, communication, and low-power applications. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and I/O in one compact device. The Cortex-M3 architecture provides a 32-bit instruction set and exception-based control architecture, while the LPC1311FHN33 adds embedded peripherals needed for sensors, actuators, data acquisition, and serial communications. In the system hierarchy, it is a microcontroller IC, a semiconductor, and a component within an embedded-control or embedded-processing system. The verified manufacturer result identifies an entry-level Cortex-M3 MCU optimized for integration and low power consumption. Its 72 MHz maximum operating frequency supports responsive control loops and protocol handling, while 8 kB flash and 2 kB data memory suit compact firmware. One Fm+ I2C interface enables connection to sensors and EEPROMs, the UART supports serial data exchange, and four general-purpose timers support timing, pulse generation, and motor-control-related tasks. The LPC1311FHN33 is positioned for applications where integration and compactness matter more than high memory capacity or extensive connectivity. Its small 33-pin HVQFN package is appropriate for dense embedded products, but engineers should verify the exact pin assignments, exposed-pad requirements, decoupling, clocking, and peripheral multiplexing against the manufacturer datasheet before layout or firmware release. Typical uses include industrial sensor nodes, building and access-control terminals, compact instrument controllers, communication modules, low-power embedded systems, and small motor or actuator-control boards. The Cortex-M3 platform can execute interrupt-driven firmware efficiently, while the UART and I2C interfaces reduce the need for separate communication components. Design with the verified 2 V to 3.6 V supply range in mind and confirm device-specific timing and electrical limits in the datasheet. Keep power and decoupling layout compact, provide the required clock and reset behavior, and reserve pins for programming and debug functions. The available search data does not establish a complete pinout, package drawing, or regulator-specific SOA information, so those details must be verified before production use. This page combines the verified NXP product identity, manufacturer specification snippets, distributor references, and the available cross-reference results. Pricing is reported as of 2026-10-23 where a numeric price is not present in the supplied data, and unverified replacement or package claims are explicitly flagged rather than inferred.

Devis Contact
LPC1311FHN33,551 - 72MHz Cortex-M3 8KB Flash MCU | NXP
LPC1311FHN33,551

LPC1311FHN33,551 - 72MHz Cortex-M3 8KB Flash MCU | NXP

The NXP LPC1311FHN33,551 is an entry-level 32-bit Arm Cortex-M3 microcontroller running at up to 72 MHz, with 8 kB on-chip flash memory, up to 2 kB of SRAM, and a 32-pin HVQFN (7x7 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals to control electronic systems. The LPC1311FHN33,551 belongs to the LPC13xx family within the broader hierarchy of 32-bit microcontrollers -> embedded processors -> semiconductors, sitting at the entry level of NXP's Cortex-M3 portfolio. Key features include a 72 MHz Cortex-M3 core with an integrated Nested Vectored Interrupt Controller (NVIC), a Fast-mode plus (Fm+) I2C interface, one UART, four general-purpose timers, up to 28 GPIO pins, and USB device capability available on the wider LPC13xx family. The small 7x7 mm HVQFN-33 package with 0.85 mm height suits space-constrained designs. The Cortex-M3 core uses a 3-stage pipeline with Thumb-2 instruction set, delivering efficient code density and deterministic interrupt handling. Flash memory is tightly coupled for zero-wait-state execution at full speed, and the supply range of 2.0 V to 3.6 V supports battery-powered operation. Operating temperature spans -40C to +85C per the commercial/industrial grade rating. Typical applications include consumer electronics control, HID USB peripherals, industrial sensor nodes, home automation, and simple motor or lighting control where 8 kB of code space and low cost are sufficient. Design consideration: budget code size carefully - 8 kB of flash fills quickly with USB or complex protocol stacks; if more headroom is needed, the pin-compatible LPC1313 (32 kB) in the same HVQFN-33 package is the natural upgrade path. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Devis Contact
LPC1313FBD48/01 - 72MHz Cortex-M3 MCU | NXP | Embedded
LPC1313FBD48/01

LPC1313FBD48/01 - 72MHz Cortex-M3 MCU | NXP | Embedded

The NXP Semiconductors LPC1313FBD48/01 is an Arm Cortex-M3-based 32-bit microcontroller for embedded applications, operating at CPU frequencies up to 72 MHz and integrating up to 32 kB of flash memory with up to 8 kB of data memory. The device is supplied in a 48-pin LQFP package measuring approximately 7 mm by 7 mm. A microcontroller is a programmable system-on-chip that combines a processor core, memory, peripherals, and communication interfaces on one semiconductor device. The LPC1313FBD48/01 belongs to the MCU, embedded processor, and power-management-IC hierarchy. Its Cortex-M3 architecture provides a compact platform for control-oriented products, while its integrated interfaces allow the device to operate without several discrete interface components. Key features include operation at up to 72 MHz, as much as 32 kB of embedded flash, and as much as 8 kB of SRAM. The peripheral set includes one Fast-mode Plus I2C interface, one UART, four general-purpose counter or timer blocks, and as many as 40 I/O ports. The 2 V to 3.6 V operating-voltage range supports low-voltage embedded systems, while the 48-pin LQFP package exposes the mixed-signal and digital resources through a conventional leaded footprint. The LPC1313 family combines a deterministic Arm Cortex-M3 processor core with an integrated peripheral set intended for cost-sensitive embedded control. Flash memory supports in-system firmware storage, and the SRAM provides working memory for control code, interrupt handling, and peripheral data. The I2C and UART interfaces support connection to external sensors, EEPROMs, transceivers, and host controllers. Additional GPIO permits digital inputs, outputs, interrupt sources, and basic control signaling to be consolidated on the same device. Typical applications include industrial sensor nodes, building and access-control equipment, consumer accessories, low-power data collectors, embedded USB peripherals, and compact control boards. A 72 MHz Cortex-M3 can manage multiple interrupt-driven peripherals, protocol handling, and application logic without requiring a higher-complexity processor. For designs requiring several independent timers, sensor interfaces, or communications channels, the integrated resources reduce board area and reduce the number of external devices. The principal design consideration is the 2 V to 3.6 V supply range. The power architecture, regulator design, decoupling, and I/O voltage levels must therefore be coordinated so that every external signal remains within the device's electrical limits. Because the family has a published end-of-life notice, engineers should also confirm the exact orderable suffix, longevity requirements, and migration path before beginning a long-life production design. This product page consolidates the official NXP device description, package and memory characteristics, lifecycle information, interface details, and same-family replacement guidance. It also adds application-oriented selection guidance and practical design notes to help engineers evaluate the LPC1313FBD48/01 beyond basic catalogue information.

Devis Contact
LPC1315FBD48,551 - 72MHz Cortex-M3 MCU 32KB Flash | NXP
LPC1315FBD48,551

LPC1315FBD48,551 - 72MHz Cortex-M3 MCU 32KB Flash | NXP

The NXP LPC1315FBD48,551 is an entry-level 32-bit ARM Cortex-M3 microcontroller operating at up to 72 MHz, with 32 KB on-chip flash memory and 8 KB SRAM, housed in a 48-pin LQFP (7x7 mm) package. An ARM Cortex-M3 microcontroller is a 32-bit embedded processor built on the ARMv7-M architecture, which uses a 3-stage pipeline and a Harvard bus structure with separate instruction and data buses plus a dedicated peripheral bus. Within the power-management hierarchy, an MCU integrates the CPU core, memory, and peripherals into a single system-on-chip, replacing multi-chip microprocessor solutions in embedded systems. Key features of the LPC1315FBD48,551 include high levels of peripheral integration and low power consumption: a fast GPIO module with pin toggle rates far above legacy 8051-class MCUs, USART serial communication, on-chip ADC, and in-system programmable (ISP) and in-application programming (IAP) flash. The Cortex-M3 core includes an internal prefetch unit supporting speculative branching, plus enhanced debug features via Serial Wire Debug and JTAG interfaces. Architecturally, the LPC13xx series executes Thumb-2 instructions for high code density, and NXP's nested vectored interrupt controller (NVIC) delivers deterministic low-latency interrupt handling essential for real-time firmware. The flash accelerator optimizes sequential code execution at the full 72 MHz clock rate. Typical applications include industrial control and automation nodes, consumer appliances, motor control interfaces, USB-connected accessories, and embedded system retrofit designs where 32-bit performance must replace legacy 8-bit devices without cost or board-area growth. A key design consideration is supply voltage: the LPC1315FBD48,551 operates from a 3.3 V rail, so level shifting is required when interfacing 5 V logic; decouple each VDD pin with 100 nF ceramics placed close to the package. This page synthesizes distributor pricing, drop-in alternatives within the LPC13xx family, and practical design guidance not found in the NXP datasheet alone.

Devis Contact
LPC1316FHN33,551 - Cortex-M3 72MHz MCU 48KB Flash | NXP
LPC1316FHN33,551

LPC1316FHN33,551 - Cortex-M3 72MHz MCU 48KB Flash | NXP

The NXP LPC1316FHN33,551 is a 32-bit Arm Cortex-M3 entry-level microcontroller operating at up to 72 MHz, with 48 KB of on-chip flash memory and a 32-pin HVQFN (7x7 mm) exposed-pad package. An entry-level 32-bit MCU is an integrated circuit that combines a processor core, program flash, SRAM, and mixed-signal peripherals on a single die, sitting in the product hierarchy between 8-bit MCUs and high-performance Cortex-M4/M7 devices. The LPC1316 belongs to the NXP LPC1300 family, which targets embedded applications requiring a high level of integration and low power consumption. Key features include the Arm Cortex-M3 core with a 3-stage pipeline and Harvard architecture with separate instruction and data buses, CPU speeds up to 72 MHz, 48 KB flash, a USB 2.0 full-speed device controller, USART serial interfaces, and an internal prefetch unit supporting speculative branching for improved execution efficiency. Technically, the Cortex-M3 core integrates an NVIC interrupt controller, SysTick timer, and enhanced debug features, while the LPC1300 peripheral set adds fast GPIO, 10-bit ADC, and serial connectivity on a single 3.3 V supply rail (2.5 V to 3.3 V operating range per distributor data). Typical applications include USB-connected embedded devices, industrial control nodes, consumer appliances, and battery-powered instrumentation where 8-bit MCUs lack headroom but full Cortex-M4 performance is unnecessary. Design consideration: the 32-HVQFN exposed pad must be soldered to a ground plane for both thermal dissipation and signal integrity; verify the 2.5 V to 3.3 V supply window before reusing a 5 V-tolerant design. This page synthesizes verified distributor pricing, pin-compatible LPC13xx family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Devis Contact
LPC1317FBD64,551 - 72MHz Cortex-M3 MCU 64KB Flash | NXP
LPC1317FBD64,551

LPC1317FBD64,551 - 72MHz Cortex-M3 MCU 64KB Flash | NXP

The NXP LPC1317FBD64,551 is an ARM Cortex-M3 based 32-bit microcontroller for embedded applications featuring high integration and low power consumption. It operates at CPU frequencies up to 72 MHz, integrates 64 KB of flash and up to 12 KB of SRAM, and is housed in a 64-pin LQFP (10x10 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a wide range of peripherals such as timers, communication interfaces, ADC/DAC blocks, and GPIO. MCUs sit at the heart of nearly every embedded system, from industrial sensor nodes to consumer appliances, forming the lowest tier of the compute hierarchy alongside microprocessors, DSPs, and SoCs. Key features of the LPC1317FBD64,551 include a 3-stage pipelined Cortex-M3 core with Harvard architecture (separate instruction/data buses plus a peripheral bus), USB device support, multiple USART ports, on-chip EEPROM, and the NXP MCU peripheral family. The device targets entry-level 32-bit applications where deterministic real-time behaviour, code density, and ease of use via the Cortex Microcontroller Software Interface Standard (CMSIS) are required. The 72 MHz Cortex-M3 core provides 1.25 DMIPS/MHz (Dhrystone 2.1) performance, which is ample for protocol stacks, motor-control inner loops, and human-machine interface logic. The Harvard bus structure enables simultaneous fetches on the instruction and data paths, reducing stalls. Integrated EEPROM provides byte-erasable non-volatile storage for configuration or calibration records without external parts. Typical applications include USB HID peripherals, industrial sensors, low-cost consumer devices, building automation, USB-to-UART bridges, and small motor-control subsystems. The combination of USB device plus USART plus GPIO makes it well suited as a flexible communications co-processor on larger boards. When designing with the LPC1317FBD64,551, decouple VDD/VDDA with 100 nF ceramic capacitors placed close to each pin pair, and route the analog supply through a ferrite bead if the ADC is used. Confirm that the chosen crystal or internal oscillator setting matches the USB baud derivation tree when USB device operation is required. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes that complement the NXP datasheet and standard distributor listings.

Devis Contact
LPC1342FBD48,151 - 72MHz Cortex-M3 MCU, 16KB Flash | NXP
LPC1342FBD48,151

LPC1342FBD48,151 - 72MHz Cortex-M3 MCU, 16KB Flash | NXP

The NXP LPC1342FBD48,151 is an entry-level 32-bit microcontroller based on the ARM Cortex-M3 core, operating at CPU frequencies of up to 72 MHz with 16 kB of on-chip flash memory and 4 kB of SRAM, housed in a 48-pin LQFP (7x7 mm) surface-mount package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and programmable peripherals on one die, sitting at the center of the embedded systems hierarchy that spans from simple 8-bit MCUs to application processors. The LPC1342 belongs to the low-power LPC13xx family of Cortex-M3 microcontrollers designed for embedded applications requiring a high level of integration and low power consumption. Key features include the ARM Cortex-M3 core with integrated NVIC and hardware divide, USB Device connectivity as a headline peripheral, up to 16 kB flash with in-system programming, and one Fast-mode Plus (Fm+) I2C interface. These combine to deliver USB-enabled designs at a very low bill-of-material cost. Technically, the Cortex-M3 architecture provides Thumb-2 instruction efficiency and deterministic interrupt handling through the nested vectored interrupt controller, while the LPC13xx memory architecture places flash and SRAM on an AHB-Lite bus matrix. The serial interfaces, including Fm+ I2C capable of driving 1 Mbit/s plus UART and SPI, support typical sensor and display stacks in compact footprints. Typical applications include USB HID devices and USB bootloader-based products, blood pressure monitors and portable medical instruments, and consumer peripherals such as remote controls and lighting controllers, where 16 kB of code space and USB connectivity are sufficient. Design consideration: budget the 16 kB flash carefully, as USB stack plus application typically consumes 8-12 kB; the larger-flash LPC1345/46/47 members share the same LQFP-48 footprint if headroom is needed. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Devis Contact
LPC1343FBD48,151 - 32KB Flash 72MHz Cortex-M3 MCU | NXP
LPC1343FBD48,151

LPC1343FBD48,151 - 32KB Flash 72MHz Cortex-M3 MCU | NXP

The NXP LPC1343FBD48,151 is an entry-level 32-bit ARM Cortex-M3 microcontroller with 32KB Flash, 8KB SRAM, and a 72MHz CPU core, housed in a 48-pin LQFP (7x7 mm) package. It integrates a USB 2.0 full-speed device controller, 10-bit ADC, and a wide peripheral set targeting embedded applications that require low power consumption and high integration. The part is supplied in tray packaging as indicated by the ",151" suffix and operates from a 2.0V to 3.6V single supply. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor core designed by Arm Holdings for low-power, deterministic embedded use. It belongs to the Cortex-M family of microcontrollers, which are derived from the ARMv7-M architecture and feature a Thumb-2 instruction set, hardware single-cycle multiply, and a Nested Vectored Interrupt Controller (NVIC). Cortex-M3 sits below Cortex-M4 in the hierarchy (no DSP extensions, no FPU) but above Cortex-M0/M0+ in performance and instruction density. Within NXP's portfolio, the LPC1300 family is the lowest-tier Cortex-M3 line, intended as a cost-down replacement for LPC1100 Cortex-M0 designs and as a stepping stone to the LPC1500 Cortex-M3 family. Key features include 32KB on-chip Flash, 8KB SRAM, a 72MHz maximum CPU clock with a 3-stage Harvard pipeline, USB 2.0 full-speed device with on-chip PHY, a 10-bit ADC with 8 channels and conversion rates up to 400 ksps, two SSP/SPI controllers, one I2C-bus interface, one Fast-mode Plus I2C, a UART, and four general-purpose counter/timers. The device also includes a windowed Watchdog Timer, a 12 MHz internal RC oscillator trimming to 1% accuracy, and support for four low-power modes (Sleep, Deep-sleep, Power-down, and Deep-Down) that draw as little as a few microamps. Architecturally, the LPC1343 combines the Cortex-M3 core with an AHB-Lite bus matrix, a dedicated ROM-based boot loader with USB MSC/HID drivers, and a unique configuration word (CONFIG) that lets designers fine-tune oscillator trimming and Flash erase behavior. The integrated USB PHY eliminates the need for external 48 MHz crystals on most designs, and the built-in HID/Mass Storage boot loader enables in-field firmware upgrades without a JTAG programmer. Typical applications include USB peripherals (HID keyboards, mice, CDC serial bridges), low-cost sensor hubs, building automation nodes, point-of-sale terminals, and battery-powered embedded devices where low active current (~10 mA at 72 MHz) and deep-sleep current (~1 uA) are critical. Design consideration: enable the on-chip pull-up resistor on the VBUS pin to detect USB insertion without external components, and ensure the ISP entry pin (PIO0_1) is held low at reset only when you intend to enter In-System Programming mode, since accidental low on this pin at power-up halts user code execution. This page synthesizes distributor pricing for the ",151" tray variant, drop-in package alternatives, and practical design notes not found in the standalone manufacturer datasheet.

Devis Contact
LPC1345FBD48,151 - 32KB Cortex-M3 MCU 72MHz LQFP-48 | NXP
LPC1345FBD48,151

LPC1345FBD48,151 - 32KB Cortex-M3 MCU 72MHz LQFP-48 | NXP

The NXP Semiconductors LPC1345FBD48,151 is an entry-level 32-bit microcontroller based on the Arm Cortex-M3 core, operating at up to 72 MHz with 32 KB on-chip flash memory and integrated USB 2.0 full-speed device controller, housed in a 48-pin LQFP (7x7 mm) package. An Arm Cortex-M3 microcontroller is a class of embedded processor built on the Armv7-M architecture with a 3-stage pipeline, Harvard architecture with separate instruction and data buses, and an integrated nested vectored interrupt controller (NVIC). Within the embedded system hierarchy, an MCU combines a CPU core, flash memory, SRAM, and peripherals such as USB, UART, SPI, and I2C into a single chip, making it a complete system-on-chip for embedded applications. The LPC13xx family occupies the entry-level tier of NXP's LPC microcontroller portfolio, below the LPC15xx and LPC40xxx families. Key features of the LPC1345FBD48 include the enhanced debug capability of the Cortex-M3 core, low power consumption, and a high level of peripheral integration on a single die. According to NXP's product page, the Cortex-M3 core offers system enhancements such as enhanced debug features and a higher level of support block integration, plus an internal prefetch unit supporting speculative branching. The Harvard architecture with separate local instruction and data buses plus a dedicated peripheral bus sustains near single-cycle throughput at 72 MHz, while the prefetch unit keeps the pipeline fed from zero-wait-state SRAM. The integrated USB device controller, boot ROM with USB in-system programming, and serial interfaces (UART, SPI, I2C) reduce bill-of-materials count for USB-connected designs. Typical applications include USB HID device firmware, industrial control nodes, consumer appliance interfaces, and general-purpose embedded control where a 32-bit upgrade path from 8-bit MCUs is desired. The 7x7 mm LQFP-48 footprint suits compact, hand-solderable and reflow-compatible two-layer boards. Design consideration: budget flash and SRAM carefully - the 32 KB flash / 8-12 KB SRAM combination of the LPC1345 is adequate for HID-class USB applications but tight for USB composite classes with RTOS; step up to the pin-compatible LPC1347 (64 KB) if headroom is needed. This page synthesizes distributor pricing, pin-compatible same-family alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet.

Devis Contact
LPC1347FHN33,551 - 72MHz Cortex-M3 64KB Flash MCU | NXP
LPC1347FHN33,551

LPC1347FHN33,551 - 72MHz Cortex-M3 64KB Flash MCU | NXP

The NXP LPC1347FHN33,551 is an entry-level 32-bit ARM Cortex-M3 microcontroller operating at up to 72 MHz, with 64 KB of on-chip flash memory and 12 KB of SRAM, housed in a 32-pin HVQFN (7x7 mm) package with exposed pad. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the complete embedded controller at the heart of countless electronic products. The LPC1347FHN33,551 belongs to the broader hierarchy of microcontrollers: ARM Cortex-M3 core -> 32-bit MCU -> LPC13xx family -> entry-level embedded controller segment, where cost, power efficiency, and peripheral integration matter more than raw compute throughput. Key features include the 72 MHz Cortex-M3 CPU with a 3-stage pipeline and Harvard architecture, 64 KB flash for program storage, USB 2.0 full-speed device capability, and a USART serial port. The device also integrates EEPROM for non-volatile parameter storage, a rich timer and PWM complement, 10-bit ADC channels, and multiple serial interfaces including I2C and SPI, enabling compact single-chip designs. Architecturally, the Cortex-M3 core incorporates separate local instruction and data buses, a third bus dedicated to peripherals, and an internal prefetch unit that supports speculative branching, improving effective instruction throughput. Enhanced debug features and a high level of support-block integration reduce development effort, while low power consumption suits battery-operated and energy-conscious designs. Operating from a 2.5 V to 3.3 V supply range, the MCU integrates cleanly with common 3.3 V logic systems. Typical applications include USB-connected embedded devices, consumer and industrial control boards, sensor hubs, and lighting or motor-adjacent control systems where a 32-bit core, USB device port, and flash-based field upgrades are required in a compact 7x7 mm footprint. A key design consideration is the HVQFN package's exposed pad, which must be soldered to a grounded PCB land pattern to achieve rated thermal and electrical performance; in-circuit programming via the USART or USB bootloader also simplifies field updates without a separate programmer. This page synthesizes verified distributor data, same-family drop-in alternatives, pricing tiers, and practical design guidance not consolidated in the manufacturer datasheet, providing engineers with a single citable reference for the LPC1347FHN33,551.

Devis Contact
LPC1517JBD48 - Cortex-M3 MCU, 72MHz, 128KB Flash, USB, CAN | NXP
LPC1517JBD48

LPC1517JBD48 - Cortex-M3 MCU, 72MHz, 128KB Flash, USB, CAN | NXP

The NXP LPC1517JBD48 is a 32-bit ARM Cortex-M3 microcontroller designed for high-precision motor control and embedded industrial applications, housed in a 48-pin LQFP (7x7 mm) package. It integrates up to 128 kB of flash memory, 32 kB of SRAM, a full-speed USB device controller, a CAN 2.0B interface, a 12-bit ADC and a 10-bit DAC for analog signal conditioning, all driven by a 72 MHz CPU clock with a single-cycle multiplier and hardware divider. An ARM Cortex-M3 microcontroller belongs to the Cortex-M family of processors optimized for deterministic, low-power embedded workloads. The Cortex-M3 core combines a 3-stage pipeline, Thumb-2 instruction set, and NVIC (Nested Vectored Interrupt Controller) for low-latency interrupt response. The LPC15xx family extends this foundation with motor-control-oriented peripherals including PWM, QEI (Quadrature Encoder Interface), and dual-sample-and-hold ADCs - making it ideal for field-oriented control (FOC) of brushless DC and permanent-magnet synchronous motors. Key features include dedicated motor-control PWM with center-aligned mode, two 12-bit successive-approximation ADCs capable of simultaneous dual-channel sampling, a hardware QEI for position feedback, and an integrated temperature sensor. Additional peripherals include 3 USART, 2 SPI, 2 I2C, USB FS device with on-chip PHY, RTC, and a windowed watchdog timer. The LQFP-48 footprint exposes up to 38 GPIO lines with interrupt capability on every pin. The LPC1500 series incorporates a high-precision analog front end featuring 2/2 MSPS dual-sample-and-hold ADCs and a 10-bit DAC for reference generation. The Cortex-M3 core includes a memory protection unit (MPU) and a wake-up interrupt controller for low-power sleep modes. The device operates from a 2.4V to 3.6V supply. Typical applications include sensorless BLDC motor drives (fans, pumps, E-bikes), field-oriented control of PMSM motors in industrial servo drives, robotic actuators and CNC auxiliary axes, automotive HVAC and cooling subsystems, and factory automation motion controllers. The dual ADC and hardware QEI are specifically architected for the simultaneous control of two motors, enabling multi-axis drives in highly flexible configurations. When designing with this MCU, allocate adequate decoupling near the VDDA/VREGB supply pins and provide a low-impedance ground pour under the LQFP-48 package. For motor-control applications, ensure the high-current gate-driver ground returns are isolated from the analog ground plane to prevent ADC reference noise from corrupting current-sense measurements. This page synthesizes distributor pricing, drop-in same-package alternatives from the LPC15xx family, and practical design considerations that are not consolidated in the manufacturer datasheet.

Devis Contact
LPC1517JBD64 - 72MHz Cortex-M3 MCU, 96KB Flash, 64-LQFP | NXP
LPC1517JBD64

LPC1517JBD64 - 72MHz Cortex-M3 MCU, 96KB Flash, 64-LQFP | NXP

The NXP LPC1517JBD64 is an ARM Cortex-M3 32-bit microcontroller with 72 MHz CPU performance, 96 KB flash, and 32 KB SRAM, housed in a 64-pin LQFP (10x10 mm) package for cost-sensitive embedded motor-control and industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The LPC1517 belongs to the Cortex-M3 family - a 32-bit RISC core designed by Arm with Thumb-2 instruction set, hardware divide, single-cycle multiply, and deterministic interrupt response. Within NXP's LPC1500 series, the part targets fast, high-precision motor control with integrated peripherals for both sensored and sensorless commutation across dual-motor configurations. Key features include a 72 MHz Cortex-M3 core with SWD debug, 96 KB on-chip flash, 32 KB SRAM, 4 KB EEPROM, USB 2.0 full-speed host/device, one CAN 2.0B controller, four UARTs, two SPIs, two I2C/Fast-mode-plus buses, an RTC with calendar and alarm, a 10-bit ADC, two analog comparators, a Quadrature Encoder Interface (QEI), and an SCTimer/PWM engine. Power is supplied at 3.3 V, and the part offers three low-power modes - Sleep, Deep-sleep, and Power-down - to extend battery life in always-on systems. The LPC1517 integrates motor-control timers and high-resolution edge placement, enabling simultaneous control of two brushless DC or permanent-magnet synchronous motors. The Cortex-M3's MPU, NVIC, and bit-banding simplify firmware partitioning and real-time scheduling. Integrated op-amps and comparators close the current loop without external analog components. Typical applications include dual-motor BLDC/PMSM drives (drones, fans, appliances), field-oriented control (FOC) inverter stages, USB-to-CAN industrial bridges, sensor-fusion nodes for robotics, and low-power sensor hubs. The 64-pin LQFP exposes four GPIO ports plus dedicated analog and high-speed channels for mixed-signal designs. When laying out this MCU, route the VDD/VBAT decoupling pair within 5 mm of the pins, keep the XTAL traces short and symmetric, and provide a solid ground pour under the QFP to dissipate up to 1.5 W under full peripheral load. Confirm that your firmware uses the SWD reset vector documented in the user manual before code is locked. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet - giving you a faster procurement and design decision than distributor catalogs alone.

Devis Contact
LPC1517JBD64E - 72MHz Cortex-M3 Motor-Control MCU 64KB | NXP
LPC1517JBD64E

LPC1517JBD64E - 72MHz Cortex-M3 Motor-Control MCU 64KB | NXP

The NXP LPC1517JBD64E is an ARM Cortex-M3 based 32-bit microcontroller optimized for fast, easy, and high-precision motor control, featuring 72 MHz CPU performance, 64 KB flash, and 36 KB SRAM in a 64-pin LQFP (10x10 mm) package. The LPC1500 series incorporates dedicated peripherals for high-accuracy sensored and sensorless motor control, enabling simultaneous control of two motors in highly flexible configurations with on-chip analog comparators and fast ADCs. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor core designed by Arm Holdings that balances high computational throughput with deterministic interrupt response, widely used in motor control, industrial automation, and embedded sensing applications. Within NXP's portfolio, the LPC1500 family sits between the entry-level LPC1100 Cortex-M0/M0+ parts and the higher-performance LPC1700 Cortex-M3 series, targeting cost-sensitive precision motor drives. Key features include dual 12-bit, 12-channel, 2 Msps ADCs that support two independent conversion sequences, an analog comparator subsystem for hardware overcurrent detection, a configurable state-configurable timer (SCTimer/PWM) subsystem, and dedicated PWM outputs for 3-phase inverters. Connectivity is provided through CAN, I2C, SPI, and USART interfaces, and brown-out detect, POR, PWM, and WDT functions are integrated. The device operates from a 2.4 V to 3.6 V supply across -40 C to +105 C. Architecturally, the LPC1517 uses a 3-stage pipeline Cortex-M3 core with single-cycle hardware multiply, NVIC for deterministic interrupt handling, and a peripheral reflex system for fast hardware-triggered ADC and PWM sequencing without CPU intervention. The wide ADC sampling rate combined with the SCTimer/PWM enables field-oriented control (FOC) loops with sub-microsecond PWM resolution in motor-control loops. Typical applications include BLDC and PMSM motor drives, industrial servo controllers, robotic actuators, sensored/sensorless fan and pump controllers, and precision power conversion. The LPC1500 family is engineered for cost-sensitive embedded motor control where deterministic timing and fast analog sampling are required. When designing with the LPC1517JBD64E, ensure decoupling capacitors are placed close to each supply pin and that the analog and digital ground domains are managed carefully to preserve ADC SNR in noisy switching environments. The integrated analog comparators can directly trigger PWM shutdown on overcurrent events without CPU load. This page synthesizes distributor pricing, drop-in compatible same-family NXP alternatives, and practical motor-control design notes not collated in the manufacturer datasheet.

Devis Contact
LPC1518JBD64 - 72MHz Cortex-M3 MCU, 64KB Flash, 64-LQFP | NXP
LPC1518JBD64

LPC1518JBD64 - 72MHz Cortex-M3 MCU, 64KB Flash, 64-LQFP | NXP

The NXP Semiconductors LPC1518JBD64 is a 32-bit ARM Cortex-M3 microcontroller in a 64-pin LQFP (10x10 mm) package, operating at up to 72 MHz, with 64 KB of flash memory and 12 KB SRAM, designed for energy-efficient embedded designs with an integrated self-wake timer. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor core designed by Arm Holdings for low-cost, energy-efficient embedded applications. It sits within the hierarchy: ARM Cortex-M3 -> Cortex-M family -> ARMv7-M architecture -> 32-bit MCU -> microcontroller -> semiconductor IC. The LPC1500 family from NXP targets motor-control and signal-conversion applications where deterministic PWM, fast ADC sampling, and low power consumption are required. Key features include the SWM (Switch Matrix) peripheral routing engine that allows any digital function to be mapped to any GPIO pin, a 1 MSPS ADC with up to 12 input channels, four configurable PWM timers with quadrature encoder support, and USB 2.0 Full-Speed, CAN 2.0, and up to two SPI, three USART, and two I2C interfaces. The integrated self-wake timer enables RTC-driven duty-cycling between deep-sleep and active states to minimize idle current. The LPC1518JBD64 uses a 3-stage pipeline Cortex-M3 core with single-cycle multiply and hardware divide, achieving 0.9 DMIPS/MHz core performance. The peripheral set includes a state-configurable timer (SCT) capable of complex timing, PWM, and capture sequences without CPU intervention, which is particularly valuable in motor control loops where deterministic edge timing is required. The 1 MSPS ADC and fast comparator enable field-oriented control (FOC) of brushless DC motors in real time. Typical applications include sensorless brushless DC motor drives (BLDC), field-oriented control of permanent magnet synchronous motors (PMSM), servo motor controllers, two-phase interleaved PFC front-ends, and low-power industrial sensor nodes. The integrated QEI (Quadrature Encoder Interface) and SCTimer make the part particularly attractive for cost-optimized servo control where external DSP or FPGA logic would inflate the BOM. When designing with the LPC1518JBD64, leverage the SWM peripheral to simplify PCB routing and reduce pinout constraints; the same physical pinout can serve different application roles without board rework. Be aware that the part entered Last Time Buy status in February 2024, so designers planning long-life-cycle products should consult the alternatives list for currently-active pin-compatible options. This page synthesizes distributor pricing, drop-in same-brand and cross-brand alternatives, application reference designs, and practical design considerations not consolidated in any single manufacturer document.

Devis Contact
LPC1518JBD64E - ARM Cortex-M3 72MHz 128KB Flash MCU | NXP
LPC1518JBD64E

LPC1518JBD64E - ARM Cortex-M3 72MHz 128KB Flash MCU | NXP

The NXP LPC1518JBD64E is a 32-bit ARM Cortex-M3 microcontroller from the LPC15xx motion-control family, operating at up to 72 MHz with 128 KB of on-chip Flash and 12 KB SRAM, housed in a 64-pin LQFP (10x10 mm) package. It integrates two 12-bit, 12-channel, 2 Msps ADCs and a motor-control PWM block optimized for high-accuracy sensored and sensorless motor control of up to two motors simultaneously. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor core designed by Arm for deterministic embedded applications, combining Thumb-2 instruction set efficiency with low interrupt latency. The Cortex-M3 belongs to the Cortex-M family (Cortex-M0/M0+/M3/M4/M7/M33), which sits under the broader category of microcontrollers (MCUs) -> embedded processors -> semiconductors. This device is a member of NXP's LPC1500 family, a low-power motion-control platform that combines DSP-like peripheral math with classical MCU simplicity. Key features include 128 KB Flash with in-system programming (ISP) and in-application programming (IAP), 12 KB SRAM, two 12-bit 2 Msps ADCs, one 10-bit DAC, four timers, a state-configurable timer (SCTimer/PWM), USB 2.0 full-speed device/host with on-chip PHY, two I2C, two SSP/SPI, one UART, an integrated self-wake timer, and a low-power RTC. The 72 MHz Cortex-M3 core delivers 1.25 DMIPS/MHz and supports single-cycle MAC, providing enough headroom for real-time motor-control loops. Architecturally, the LPC1518JBD64E uses a 3-stage pipeline Cortex-M3 with NVIC, configurable nested vectored interrupts, and a hardware single-cycle multiply. The motor-control subsystem pairs dual ADCs with the SCTimer/PWM block, which can generate complementary PWM with dead-time insertion and asymmetric edge placement — critical for three-phase FOC algorithms. The integrated USB 2.0 full-speed PHY eliminates external transceiver cost. Typical applications include BLDC/PMSM motor drives, industrial servo control, field-oriented control (FOC) inverters, robotic actuators, sensor-fusion platforms, and USB HID/COM peripherals. The 128 KB Flash is well suited to FOC firmware libraries that exceed typical 64 KB Flash budgets. This part's built-in 2 Msps ADCs simultaneously sample phase currents and back-EMF. When designing with this device, note that the LPC1518JBD64 has been flagged for end-of-production; the LPC1518JBD64E is the current revision. Plan for migration to the LPC1549 or LPC15xx extended family for long-life programs. Place the decoupling network (100 nF + 4.7 µF) directly at the VDD/VDDA pins to keep ADC noise below 1 LSB.

Devis Contact