Microcontrôleurs

Produits (18727)

PIC32MX460F512L-80I/PT - 80MHz 32-bit MCU 512KB Flash USB | Microchip
PIC32MX460F512L-80I/PT

PIC32MX460F512L-80I/PT - 80MHz 32-bit MCU 512KB Flash USB | Microchip

The Microchip Technology PIC32MX460F512L-80I/PT is a high-performance 32-bit microcontroller built on the MIPS32 M4K core, delivering 80 MHz of processing speed with 512 KB of Flash program memory and 32 KB of SRAM, integrated in a 100-pin TQFP (12x12 mm) package. It targets embedded designs that demand USB 2.0 On-The-Go connectivity, ample code space, and rich digital peripherals, and is supported by the MPLAB X IDE and Harmony framework. A PIC32 microcontroller belongs to the 32-bit MCU family in the broader taxonomy: 32-bit microcontroller -> RISC microcontroller -> microprocessor -> integrated circuit -> semiconductor. The PIC32MX5xx/6xx/7xx family in particular combines an industry-standard MIPS32 M4K core with Microchip's peripheral ecosystem, allowing engineers to migrate from 16-bit PIC24/dsPIC designs without abandoning existing toolchains or development boards. Key features include 512 KB of single-cycle Flash, 32 KB of SRAM with DMA support, an integrated full-speed USB 2.0 OTG controller, four channels of dedicated DMA, a 16-channel 10-bit ADC with up to 1 Msps conversion, and a peripheral pin-select mechanism for flexible signal routing. The device also provides five 16-bit timers/counters, two I2C, two SPI, and two UART ports, making it a true general-purpose MCU for connected products. Architecturally, the PIC32MX460F512L separates Flash from data RAM via a dedicated bus, and the M4K core features a 5-stage pipeline with hardware multiply/divide and shadow register sets for fast interrupt response. The four-channel DMA engine can offload ADC, SPI, I2C, and UART transfers, freeing the CPU for compute-intensive tasks such as USB stacks and graphics rendering. Typical applications include USB peripherals and HID devices, industrial control panels with graphical LCDs, point-of-sale terminals, data loggers with USB mass storage, and consumer audio equipment. The integrated USB OTG controller is the standout feature for designs that need to act as either USB host or device without an external PHY. When designing with this device, plan the 2.3 V to 3.6 V supply rail carefully and allocate enough decoupling (at minimum a 10 uF bulk plus 0.1 uF ceramic per VDD pin) to keep the PLL and USB transceiver stable. The 100-pin TQFP footprint is pin-compatible with the wider PIC32MX3xx/4xx/5xx/6xx/7xx family, simplifying board reuse when migrating up or down the product line.

Devis Contact
PIC32MX460F512L-80V/BG - 32-bit 80MHz MCU 512KB Flash USB-OTG | Microchip
PIC32MX460F512L-80V/BG

PIC32MX460F512L-80V/BG - 32-bit 80MHz MCU 512KB Flash USB-OTG | Microchip

The Microchip PIC32MX460F512L-80V/BG is a 32-bit MIPS M4K microcontroller running at 80 MHz (105 DMIPS) with 512 KB of Flash program memory and 32 KB of SRAM, housed in a 121-ball TFBGA (10x10 mm) package. It integrates a full-speed USB 2.0 On-The-Go controller with on-chip PHY, four hardware DMA channels, and a 5-stage pipeline Harvard architecture that delivers 1.56 DMIPS/MHz while remaining pin-compatible across the broader PIC32MX3XX/4XX family. A microcontroller (MCU) is an integrated circuit combining a CPU core, program and data memory, peripherals, and I/O on a single die. The PIC32MX family sits at the high-performance end of Microchip's 32-bit MCU portfolio, targeting applications that need more compute than 8-bit PIC MCUs but where the simplicity of a single-core MIPS core is preferable to Cortex-M-class devices. The PIC32MX460F512L-80V/BG specifically belongs to the "USB" sub-family, adding USB-OTG to the standard peripherals of UART, SPI, I2C, timers, and ADC. Key features include up to 85 general-purpose I/O, a 10-bit ADC with up to 16 channels and 1 Msps conversion, five 16-bit timers, two I2C, two SPI, and two UART modules. The USB-OTG controller includes an integrated transceiver, dedicated DMA channel, and supports host, device, and On-The-Go roles. Hardware multiply and divide are single-cycle, and the MIPS16e ISA mode reduces code size by up to 40% for size-critical applications. Architecturally, the chip uses a Harvard memory structure with separate 32-bit instruction and data buses feeding the M4K core, allowing simultaneous fetch and memory access. The peripheral bus runs at PBCLK derived from the system clock, allowing peripheral speed to be traded against CPU performance. This separation lets the USB controller and DMA engines operate independently of the CPU. Typical applications include USB peripherals such as HID input devices, CDC virtual COM ports, and MSD storage; industrial control front-ends; embedded web/HMI panels using the USB or UART for host connectivity; and USB host controllers for sensor hubs. The 80 MHz speed and 512 KB Flash comfortably accommodate USB stacks plus application code in a single chip. When designing with this part, plan for an external 8 MHz crystal to drive the PLL that synthesizes 80 MHz, since the on-chip USB clock accuracy is critical for USB compliance. The 121-ball BGA requires careful PCB layout - controlled-impedance traces for the USB DP/DM lines and a solid ground pour are essential. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MX family, and practical BGA-layout design notes not found in a single manufacturer document.

Devis Contact
PIC32MX460F512L-80V/PT - 80MHz 32-bit MCU 512KB Flash | Microchip
PIC32MX460F512L-80V/PT

PIC32MX460F512L-80V/PT - 80MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MX460F512L-80V/PT is a 32-bit MIPS M4K microcontroller running at 80 MHz with 105 DMIPS throughput, integrating 512 KB Flash and 32 KB SRAM, plus a USB 2.0 On-The-Go controller with integrated PHY, in a 100-pin TQFP (12x12 mm) package. The -80V speed grade runs at 80 MHz core clock over the full -40C to +105C industrial temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, plus peripheral interfaces such as timers, ADC, communication controllers, and I/O. The PIC32MX4xx family belongs to the broader hierarchy: microcontroller -> embedded processor -> semiconductor IC. Within Microchip's portfolio, PIC32 sits above 8-bit PIC16/PIC18 devices in performance and below the Cortex-M-class SAM family in cost-per-MHz, targeting general-purpose 32-bit embedded designs. Key features include 512 KB Flash, 32 KB SRAM, a 16-channel 10-bit ADC at 1 Msps, four hardware DMA channels (one dedicated to USB OTG), five 16-bit timers/counters, two I2C, two SPI, and two UART modules. The MIPS16e instruction-set mode reduces code size by up to 40%, while the 5-stage pipelined Harvard architecture supports single-cycle multiply and hardware divide. The 80 MHz core delivers 105 DMIPS, roughly 1.5 DMIPS/MHz. Architecturally, the device uses the MIPS32 M4K core with branch shadow sets to reduce interrupt latency, JTAG and 2-wire ICSP debugging, and a separate USB PLL for the 48 MHz USB clock domain. The 100-pin TQFP exposes most peripherals in parallel, supporting up to 85 digital I/O pins with 5V-tolerant inputs on most signals, simplifying mixed-voltage interfacing. Typical applications include USB peripherals (HID, CDC, mass storage), industrial control with USB diagnostics, graphical LCD interfaces, embedded web servers, and data loggers. The integrated USB OTG PHY eliminates external components for device, host, or dual-role USB implementations. When designing, pay attention to decoupling: place 0.1 uF ceramic caps on every VDD/VSS pair within 5 mm of the pins, plus a bulk 10 uF on the main rail. Use the MPLAB Harmony Configurator (MHC) for clock setup - the 8 MHz primary oscillator with PLL yields the 80 MHz system clock, while the dedicated USB PLL drives the 48 MHz USB clock independently. This page combines distributor pricing, drop-in same-package alternatives, and engineering design notes for the PIC32MX460F512L-80V/PT - synthesis that goes beyond what the manufacturer datasheet alone provides for part selection.

Devis Contact
PIC32MX460F512LT-80I/PT - 80MHz 32-bit MCU 512KB Flash TQFP-100
PIC32MX460F512LT-80I/PT

PIC32MX460F512LT-80I/PT - 80MHz 32-bit MCU 512KB Flash TQFP-100

The Microchip Technology PIC32MX460F512LT-80I/PT is a 32-bit MIPS M4K microcontroller running at 80 MHz with 512 KB Flash and 32 KB SRAM, housed in a 100-pin TQFP package. It integrates USB-OTG, a 10-bit 1 Msps ADC, and 83 general-purpose I/O pins, and operates from 2.5 V to 3.6 V across the industrial -40 C to +85 C range. What is a PIC32MX microcontroller? A PIC32MX is a 32-bit MIPS-based microcontroller from Microchip Technology that combines high computational throughput (up to 80 MHz core, 1.56 DMIPS/MHz) with rich peripheral integration including USB, CAN, and ADC peripherals. PIC32MX belongs to the taxonomy: microcontroller -> MCU -> embedded processor -> semiconductor, and sits within the broader PIC32 family alongside PIC32MM, PIC32MZ, and PIC32MX variants. The 'L' suffix denotes a 100-pin TQFP package, while the 'F512' field encodes the Flash memory size. Key features of this part include the 80 MHz MIPS32 M4K core with hardware multiply/divide, 512 KB single-cycle Flash with pre-fetch buffer, 32 KB SRAM, full-speed USB-OTG with on-chip transceiver, and a 16-channel 10-bit ADC capable of 1 Msps conversion. Communication peripherals include UART, SPI, I2C, and parallel master port, providing flexible connectivity for embedded designs. Architecturally, the PIC32MX460 uses a 5-stage pipeline MIPS32 M4K core with separate 16 KB instruction and 4 KB data caches. The Prefetch Cache Controller reduces Flash wait states, enabling near-zero-penalty execution from Flash at 80 MHz. The part's DMA controller offloads data movement between peripherals and memory, freeing the CPU for application logic. Typical applications include industrial control panels, USB peripherals (HID, CDC, mass storage), graphical HMI displays, embedded dataloggers, and motor control subsystems. The wide peripheral set and substantial RAM/Flash make it suitable for protocol-conversion gateways and point-of-sale terminals. When designing with this MCU, note the 2.5 V to 3.6 V supply constraint; many modern sensors require 3.3 V regulators with high PSRR for noise-sensitive ADC measurements. Decoupling capacitors (100 nF + 10 uF) should be placed within 5 mm of each power pin pair to minimize switching noise. The 'I' suffix indicates industrial temperature grade (-40 C to +85 C). This page synthesizes distributor pricing, drop-in PIC32 alternatives, and practical design notes not found in the standalone manufacturer datasheet.

Devis Contact
PIC32MX460F512LT-80V/BG - 32-bit MCU 512KB Flash USB-OTG | Microchip
PIC32MX460F512LT-80V/BG

PIC32MX460F512LT-80V/BG - 32-bit MCU 512KB Flash USB-OTG | Microchip

The Microchip PIC32MX460F512LT-80V/BG is a 32-bit MIPS32 M4K microcontroller with 512KB Flash and 32KB RAM, USB-OTG, and 80 MHz CPU clock, housed in a 121-pin TFBGA (10x10 mm) package. It belongs to the PIC32MX3XX/4XX family and integrates a USB 2.0 full-speed OTG controller, 16-channel 10-bit ADC, multiple UART/SPI/I2C peripherals, and a Parallel Master Port for external memory or graphics interfacing. A PIC32MX microcontroller is a 32-bit MIPS-based MCU that combines the performance of a microprocessor with the peripheral integration of an embedded controller. Within the broader taxonomy, it sits as MCU -> 32-bit MCU -> MIPS microcontroller -> PIC32 family -> semiconductor. These devices bridge the gap between 8/16-bit PIC microcontrollers and 32-bit ARM Cortex-M parts, targeting cost-sensitive embedded applications that need moderate compute, large memory, and rich connectivity. Key features include 80 MHz core frequency (up to 100 DMIPS), 1.56 DMIPS/MHz, hardware Multiply/Divide, single-cycle Flash access via 128-bit prefetch cache, 5-stage pipeline, and a wide 2.3V-3.6V operating range. The integrated USB 2.0 full-speed OTG transceiver eliminates the need for an external PHY, simplifying USB device, host, and On-The-Go designs. The PIC32MX460F512L architecture uses a 5-stage MIPS M4K pipeline with separate instruction and data buses and a configurable prefetch cache, allowing sustained execution from Flash. USB-OTG integration, 16 channels of 10-bit ADC at 1 Msps, and a Parallel Master Port give designers connectivity and mixed-signal capability without external components. Typical applications include USB peripherals (barcode scanners, custom HID, CDC devices), embedded graphics (graphical LCD control via PMP), industrial control (PLC I/O modules, sensor hubs), consumer audio, and general-purpose 32-bit embedded control. The wide memory and USB integration make it a strong fit for connected appliances and Human-Machine Interface panels. When designing with this device, ensure the 121-ball TFBGA is on a 4-layer or more PCB with matched-impedance USB routing (90 ohm differential), adequate decoupling (100 nF + 4.7 uF near each VDD pin), and that the JTAG/ICSP traces are short per Microchip ICD guidance. Watch the 3.3V rail tolerance during inrush and use a 32.768 kHz crystal for RTCC if calendar functions are required. This page synthesizes distributor pricing, drop-in package-compatible alternatives from the same family, and practical design notes that complement the manufacturer datasheet.

Devis Contact
PIC32MX470F512H-120/MR - 120MHz 32-bit MCU 512KB Flash 64-QFN | Microchip
PIC32MX470F512H-120/MR

PIC32MX470F512H-120/MR - 120MHz 32-bit MCU 512KB Flash 64-QFN | Microchip

The Microchip Technology PIC32MX470F512H-120/MR is a 32-bit MIPS32 M4K microcontroller running up to 120 MHz (150 DMIPS) with 512 KB Flash and 128 KB SRAM, housed in a 64-pin QFN (9x9 mm) package. It integrates a USB 2.0 Full-Speed OTG controller, two I2S/SPI modules, six UART, five I2C, a Parallel Master Port (PMP), a 10-bit 1 Msps ADC with up to 28 channels, two analog comparators, a Charge Time Measurement Unit (CTMU), and Peripheral Pin Select (PPS) for flexible signal routing. A 32-bit microcontroller (MCU) is an embedded processor that combines a CPU core, program memory (Flash), data memory (SRAM), and on-chip peripherals on a single die. PIC32MX MCUs occupy the performance tier above 16-bit PIC24/dsPIC parts and below the higher-end PIC32MZ families, balancing 32-bit throughput, large memory, and rich peripherals at a low BOM cost for connected embedded designs. Key features of this part include a 120 MHz core with 5-stage pipeline and single-cycle multiply, MIPS16e code compression for up to 40% smaller code size, an integrated 8 MHz internal RC oscillator with PLL, fail-safe clock monitoring, and multiple low-power modes (Idle, Sleep). The 64-QFN (MR) package is pin-compatible with most PIC24/dsPIC 64-pin devices, easing migration. Voltage range is 2.3 V to 3.6 V and operating temperature is -40 C to +105 C. Architecturally the PIC32MX470F512H uses a Harvard-style bus with separate Flash and SRAM paths, a tightly-coupled DMA controller, and an interrupt controller with five priority levels and up to 256 vectors. The CTMU enables touch sensing and precise time-of-flight measurement with sub-microsecond resolution. Typical applications include USB audio interfaces, HMI/graphics with TFT LCDs over PMP, motor control, multi-protocol bridges (UART/SPI/I2C), industrial sensors with USB-CDC or USB-HID, and embedded web/HTTP servers. The integrated USB OTG and PMP make this MCU a popular choice for cost-sensitive HMI products. When designing, ensure the 64-QFN exposed pad is soldered to a sufficiently large ground copper pour for thermal dissipation (typical theta_JA near 28 C/W). Decouple VDD/VUSB with 100 nF + 4.7 uF near the pins and route the 8 MHz crystal traces symmetrically with a guard ground to limit EMI.

Devis Contact
PIC32MX470F512H-120/PT - 120MHz 32-bit MCU 512KB Flash | Microchip
PIC32MX470F512H-120/PT

PIC32MX470F512H-120/PT - 120MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MX470F512H-120/PT is a 32-bit microcontroller based on the MIPS32 M4K architecture, delivering 120 MHz CPU clock and 150 DMIPS performance with 512 KB Flash and 128 KB SRAM in a 64-pin TQFP (PT) package. The device integrates a USB 2.0 Full-Speed OTG controller, two I2S/SPI modules, a Parallel Master Port (PMP) for graphics, a 10-bit 1 Msps ADC with up to 28 channels, a Charge Time Measurement Unit (CTMU) for touch sensing, and two analog comparators. What is a 32-bit microcontroller? A 32-bit MCU is a single-chip processor with a 32-bit data bus, internal ALU, and program/data memory that executes complex embedded firmware. Within the broader taxonomy, this part sits at: microcontroller -> 32-bit MCU -> MIPS/ARM Cortex-M class -> PIC32MX family. The "PIC32MX3/4" series combines moderate performance (150 DMIPS), generous memory, and rich peripherals at low cost, making it the de facto upgrade path from PIC24/dsPIC and PIC32MX1/2 designs that have outgrown their original memory or peripheral budget. Key features include the Peripheral Pin Select (PPS) engine that remaps digital peripherals to virtually any I/O pin, dramatically simplifying PCB routing. The 120 MHz core couples with a 7-stage pipeline and prefetch cache, while the CTMU enables robust capacitive touch interfaces. Two I2S modules, four UART, two I2C, and two SPI channels provide abundant connectivity; the USB 2.0 OTG port supports device, host, and On-The-Go roles. The 10-bit ADC offers 1 Msps with up to 28 channels; analog comparators add low-latency analog monitoring. The CTMU enables capacitive touch measurement at low cost. Typical applications include HMI panels with graphics and touch, USB peripherals (HID/CDC/MSC), audio codecs and Bluetooth audio bridges, motor control FOC loops, IoT edge nodes, and industrial sensor hubs. Designers gravitate to PIC32MX470 for HMI + USB + audio combinations where an 8-bit MCU cannot keep up but a Cortex-M4 adds unnecessary cost. When laying out the PCB, reserve at least one 10uF + one 0.1uF decoupling pair adjacent to the VDD/VSS pins, and use the Curiosity PIC32MX470 Development Board reference design for the USB 2.0 FS OTG PHY layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Devis Contact
PIC32MX470F512H-I/MR - 32-bit 100MHz MCU 512KB Flash 64-QFN | Microchip
PIC32MX470F512H-I/MR

PIC32MX470F512H-I/MR - 32-bit 100MHz MCU 512KB Flash 64-QFN | Microchip

The Microchip Technology PIC32MX470F512H-I/MR is a 32-bit MIPS M4K microcontroller running up to 100 MHz, integrating 512 KB Flash and 128 KB SRAM in a 64-pin QFN (MR) 9x9 mm package. It features USB 2.0 Full-Speed OTG, two I2S/SPI modules, two I2C, up to five UART, a 28-channel ADC, a Parallel Master Port (PMP), and Peripheral Pin Select (PPS) for flexible peripheral mapping. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals. The PIC32MX470 belongs to the broader 32-bit MCU category (32-bit -> microcontroller -> embedded processor -> semiconductor), built on the MIPS32 M4K core architecture. This family balances high performance (120 MHz / 150 DMIPS capable on the -120 speed grade) with low cost, targeting consumer, industrial, and USB-enabled embedded designs. Key features include 120 MHz maximum CPU clock on the -120 speed grade, hardware multiplier/divider, a Charge Time Measurement Unit (CTMU) for touch sensing, a Real-Time Clock Calendar (RTCC), five 16-bit timers/counters, and operation from 2.3V to 3.6V across the industrial -40°C to +105°C temperature range. The 64-QFN MR package provides a low-profile 9x9 mm footprint suitable for compact USB and HMI boards. Typical applications include USB Audio/Class-D devices, color TFT HMI panels with PMP-driven LCDs, capacitive touch sensing using CTMU, USB HID peripherals such as keyboards and game controllers, industrial control with USB-CDC bridge, and low-cost graphics terminals. The combination of 512 KB Flash and USB OTG makes it well-suited to firmware-upgradable USB products. When designing with this device, ensure the USB VBUS pin is correctly conditioned per USB 2.0 specification and that PPS remapping is validated against the chosen pinout. Use MPLAB Harmony or MPLAB X IDE with the XC32 compiler for firmware development. Decoupling should include 100 nF on each VDD/VSS pair plus a bulk 4.7 µF near the regulator. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC32MX470F512H-V/MR - 32-bit MCU 512KB Flash 64-VFQFN | Microchip
PIC32MX470F512H-V/MR

PIC32MX470F512H-V/MR - 32-bit MCU 512KB Flash 64-VFQFN | Microchip

The Microchip Technology PIC32MX470F512H-V/MR is a 32-bit MIPS microcontroller belonging to the PIC32MX3/4 family, delivering up to 100 MHz core performance with 512 KB of Flash program memory and 128 KB of SRAM. It is housed in a 64-pin VFQFN (9x9 mm) exposed-pad package and integrates a USB 2.0 Full-Speed OTG controller, two I2S/SPI modules, a Charge Time Measurement Unit (CTMU), a Parallel Master Port (PMP), and a Real-Time Clock Calendar (RTCC). The operating voltage range spans 2.3 V to 3.6 V, supporting low-power Idle and Sleep modes for energy-constrained designs. The on-chip MIPS16e instruction mode compresses code by up to 40 percent, allowing more application functionality within the same Flash budget. A 32-bit microcontroller (MCU) is a programmable embedded processor whose internal datapath, registers, and ALU are 32 bits wide, enabling single-cycle integer operations and large linear addressing ranges far beyond legacy 8/16-bit parts. Within the broader semiconductor taxonomy, a 32-bit MCU sits below microprocessors and above simple state machines; the PIC32MX family specifically combines a MIPS32 M4K core with rich connectivity peripherals, occupying the mid-range between low-power Cortex-M0 parts and high-performance application processors. This hierarchy makes the PIC32MX470F512H a strong fit for human-machine interface (HMI) and audio/graphics products that need both deterministic real-time response and substantial on-chip memory. Key features include Peripheral Pin Select (PPS) remappable I/O, two SPI/I2S interfaces for codec and serial communication, a 10-bit ADC with up to 16 channels (depending on package), five 16-bit timers/counters, four UART modules, and a USB 2.0 Full-Speed device/host/OTG controller with internal transceiver. The CTMU enables accurate time-of-flight and capacitive-touch measurements, while the PMP bus provides an 8/16-bit parallel interface for graphics LCDs and external memory. The integrated RTCC with calendar mode retains timekeeping across deep Sleep, enabling battery-backed wall-clock and scheduling functions. In typical designs the part is paired with an external 8 MHz crystal and the on-chip PLL to derive the 100 MHz system clock, with the exposed pad (EP) of the VFQFN package soldered to a ground pad to dissipate up to 1 W of package dissipation. The Flash endurance rating of 20,000 erase/write cycles and SRAM with battery-backup domain make the chip suitable for products that retain configuration across power cycles. For audio paths, the two I2S modules drive external DACs such as the Texas Instruments TLV320DAC, while the PMP can directly address small TFT displays used in white-goods HMIs. Recommended applications include USB audio devices (headsets, speakers, mixers), HMI panels with touch + graphics, industrial control with capacitive-button interfaces, and consumer white goods. The wide 2.3 V-3.6 V supply range simplifies integration with Li-ion or 3.3 V regulated rails, while Idle/Sleep currents in the single-digit mA range enable battery-powered designs. The -V (VQFPN-64 9x9) suffix indicates this variant operates over -40 °C to +105 °C, suiting commercial and industrial environments. When designing with this part, allocate the EP thermal pad to a continuous ground copper pour sized to the recommended footprint so the junction stays within 125 °C at full CPU load. Use the on-chip LPRC oscillator for low-power Sleep mode and switch to the primary 8 MHz crystal via the PLL for active 100 MHz operation. Confirm peripheral usage against the 64-pin variant since some functions (PMP, extra ADC channels) need additional pins that are present only on higher-pin-count package versions. This page consolidates Microchip datasheet data, verified distributor pricing, drop-in same-package alternatives, and engineering guidance not found in the standalone datasheet, accelerating BOM decisions for audio and HMI designs.

Devis Contact
PIC32MX470F512H-V/PT - 32-bit MCU 512KB Flash USB TQFP-64 | Microchip
PIC32MX470F512H-V/PT

PIC32MX470F512H-V/PT - 32-bit MCU 512KB Flash USB TQFP-64 | Microchip

The Microchip PIC32MX470F512H-V/PT is a 32-bit MIPS32 M4K microcontroller running up to 120 MHz (150 DMIPS) with 512 KB Flash and 128 KB SRAM, housed in a 64-pin TQFP (10x10 mm) package. The -V temperature grade denotes -40C to +105C operation, and the part carries AEC-Q100 automotive qualification per the datasheets.com parametric record. According to the PIC32MX330/350/370/430/450/470 family datasheet, integrated peripherals include USB 2.0 Full-Speed OTG, two I2S/SPI modules, two I2C, two UART, a 10-bit 1 Msps ADC with up to 28 analog channels, two analog comparators, a Parallel Master Port (PMP), and a Charge Time Measurement Unit (CTMU) for touch and capacitive sensing. What is a PIC32MX microcontroller? A PIC32MX is Microchip's 32-bit MIPS-based MCU family that bridges 8-bit PIC16/PIC18 simplicity with 32-bit performance. It belongs to the broader category of embedded microcontrollers -> RISC microcontrollers -> 32-bit MCUs -> semiconductor ICs. The M4K core executes MIPS16e compressed code for up to 40% smaller program size while supporting the standard MIPS32 instruction set, making the PIC32MX a popular choice for cost-sensitive embedded designs that need USB and graphics peripherals. Key features of the PIC32MX470F512H include 5V-tolerant digital I/O with Peripheral Pin Select (PPS) for flexible signal routing, an operating voltage range of 2.3V to 3.6V, four-wire MIPS Enhanced JTAG with six complex data breakpoints and unlimited program breakpoints, and low-power Idle and Sleep modes. The 12 KB Boot Flash region supports safe in-application and in-circuit programming, and IEEE 1149.2-compatible boundary scan is provided for production test. Typical applications for the PIC32MX470F512H-V/PT are USB human-interface devices (HID, CDC, audio), graphics interfaces via the Parallel Master Port, capacitive touch HMI panels using the CTMU, industrial control with 28 ADC channels, and automotive body and infotainment subsystems. The 64-pin TQFP footprint is pin-compatible with most Microchip 16-bit PIC24/dsPIC devices, easing migration from 8/16-bit legacy designs. When designing with this MCU, plan the 120 MHz decoupling network carefully: place 100 nF X7R ceramics on every VDD/VSS pair within 3 mm of the pins, and add a bulk 4.7 uF tantalum near the analog AVDD rail. The PPS feature lets you remap peripherals to almost any I/O, but you must lock the mapping at startup before peripheral initialization.

Devis Contact
PIC32MX470F512HT-120/PT - 32-bit MCU 512KB Flash 120MHz TQFP-64 | Microchip
PIC32MX470F512HT-120/PT

PIC32MX470F512HT-120/PT - 32-bit MCU 512KB Flash 120MHz TQFP-64 | Microchip

The Microchip Technology PIC32MX470F512HT-120/PT is a 32-bit MIPS32 M4K microcontroller featuring 512 KB of Flash program memory, 128 KB of SRAM, and a maximum CPU clock of 120 MHz (150 DMIPS), housed in a 64-pin TQFP (PT) package rated for the -40C to +105C industrial temperature range. The "H" device suffix denotes the high-pin-count 64-TQFP variant, while the "T" tape-and-reel suffix and "120" speed grade confirm the 120 MHz core. It integrates a USB 2.0 Full-Speed OTG controller, two I2S/SPI modules, Peripheral Pin Select (PPS), Parallel Master Port (PMP), and a Charge Time Measurement Unit (CTMU) for touch and capacitive sensing. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a configurable set of peripherals. The PIC32MX3/4 family extends 8/16-bit PIC heritage into 32-bit territory, positioned in Microchip's catalog between the simpler PIC32MX1/2/5 series and the higher-performance PIC32MZ/MM families. M4K is a Harvard-architecture core licensed from MIPS Technologies, paired with 5-stage pipelining and single-cycle hardware multiply/divide to deliver 1.53 DMIPS/MHz. This combination gives embedded designers a cost-effective path to graphical user interfaces, USB connectivity, and audio streaming on a deterministic real-time core. Key features of the PIC32MX470F512HT-120/PT include 512 KB Flash plus an additional 12 KB auxiliary Flash, 128 KB SRAM, two 10-bit ADC modules with up to 28 input channels, five 16-bit timers/counters, five PWM output channels, four UART modules, two I2C, two I2S, two SPI, and two analog comparators. The Peripheral Pin Select (PPS) remapping block reassigns digital peripheral functions to a wide choice of physical I/O pins, simplifying PCB routing on dense designs. Multiple low-power modes (Idle, Sleep, Deep Sleep) and a Fail-Safe Clock Monitor (FSCM) extend the part's suitability for battery and safety-critical applications. Typical applications include USB Audio Class DAC interfaces, HMI panels with TFT graphics over PMP, capacitive-touch user interfaces driven by CTMU, and industrial control nodes requiring deterministic CAN or USB connectivity. The 2.3 V to 3.6 V operating range is compatible with 3.3 V system rails common in mixed-signal designs. The PT (TQFP-64) package is the highest pin-count option of the family, exposing nearly the full peripheral complement. When designing with this device, allocate the PPS configuration carefully before PCB layout, because remapped peripheral pins must not conflict with fixed-function pins such as VBUS, D+/D-, and JTAG. Use a 10 uF + 0.1 uF bulk bypass on VDDCORE/VDD, follow the trace-length rules in the datasheet's USB section, and choose the I-grade (industrial) sub-variant for -40C to +105C environments. This page synthesizes distributor pricing, drop-in PIC32 alternatives, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC32MX470F512HT-I/MR - 32-bit MCU 80MHz 512KB Flash 64-QFN
PIC32MX470F512HT-I/MR

PIC32MX470F512HT-I/MR - 32-bit MCU 80MHz 512KB Flash 64-QFN

The Microchip Technology PIC32MX470F512HT-I/MR is a 32-bit MIPS32 M4K PIC microcontroller operating up to 80 MHz, integrating 512 KB of program Flash and 128 KB of SRAM in a 64-pin QFN (9x9 mm) package with tape-and-reel packaging. The "H" suffix designates HMI (Audio/Graphics/Touch) feature set with USB 2.0 OTG, two I2S/SPI channels, two I2C channels, two UART channels, a 28-channel ADC, and dual analog comparators. The "T" indicates tape-and-reel orientation, while "-I" denotes the industrial -40C to +85C temperature range. This combination targets embedded applications that demand rich peripheral integration at low BOM cost. The device is fabricated on a 0.25 micron CMOS process and includes a 5-channel 16-bit timer/counter, a real-time clock, and a parallel master port for graphics expansion. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile memory (RAM), non-volatile program memory (Flash), and a configurable set of peripheral interfaces. PIC32MX devices belong to the Microchip 32-bit MCU portfolio that bridges 8/16-bit PIC and 32-bit ARM Cortex-M solutions, delivering 1.56 DMIPS/MHz through the MIPS32 M4K core. Within the broader taxonomy, a microcontroller is a sub-class of microprocessor that places computing, memory and I/O on a single die, sitting under the parent category of embedded processors in the semiconductor hierarchy. Key features include single-cycle hardware multiply/divide, a 16-channel DMA controller, a 10-bit 1 MSPS ADC with up to 28 analog inputs, a CTMU for capacitive touch measurement, and a peripheral pin select (PPS) engine allowing digital functions to be remapped onto any GPIO. The device also integrates a full-speed USB 2.0 OTG controller with on-chip transceiver, eliminating the need for external PHY chips. Architecturally the PIC32MX470 uses a 5-stage pipelined M4K core with separate instruction and data buses for Flash, prefetch cache and a tightly-coupled SRAM subsystem. The USB OTG, CAN and PMP (parallel master port) blocks share DMA channels, and the PPS crossbar allows flexible peripheral-to-pin assignment. The 64-QFN package exposes 49 usable I/O pins and provides a thermal pad rated at 24.4 C/W theta_JB for moderate-power industrial environments. Typical applications include USB peripherals such as HID and CDC class devices, audio playback with I2S DACs, capacitive-touch human-machine interfaces, industrial control panels, and low-cost graphics terminals with PMP-driven TFT displays. The Curiosity PIC32MX470 Development Board (DM320103) provides a proven reference design for prototyping these scenarios. A key design consideration when selecting this device is to validate PPS remapping constraints for simultaneously active peripherals, and to ensure the 5V-tolerant I/O bank is used for signals interfacing with legacy 5V logic, since USB D+/D- pins are 5V tolerant but standard GPIO are not.

Devis Contact
PIC32MX470F512HT-I/PT - 80MHz 512KB Flash 32-bit MCU | Microchip
PIC32MX470F512HT-I/PT

PIC32MX470F512HT-I/PT - 80MHz 512KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MX470F512HT-I/PT is a 32-bit MIPS32 M4K RISC microcontroller integrating 512 KB of Flash program memory, 128 KB of SRAM, and a rich peripheral set in a 64-pin TQFP (10x10 mm) package. It operates from a 2.3 V to 3.6 V supply, supports industrial temperature range -40C to +85C, and runs the CPU up to 80 MHz with 100 MHz headroom on selected speed grades. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals into one package. The PIC32MX family places the MCU in the hierarchy: microcontroller -> embedded processor -> system-on-chip -> semiconductor, and is widely used wherever deterministic real-time control meets the need for substantial code space and connectivity peripherals. Key features include two 10-bit ADCs with up to 28 analog input channels, five 16-bit timers, five PWM outputs, four UART modules, two SPI/I2S interfaces, two I2C buses, two analog comparators, a Real-Time Clock and Calendar (RTCC), and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. The 49 digital I/O pins (with 28 analog-capable) make the device well suited to mixed-signal and human-interface designs. USB 2.0 full-speed support and a parallel master port (PMP) expand connectivity to external memory, graphics, or PC hosts. Technically, the device is built on a CMOS process with the MIPS32 M4K core delivering 1.56 DMIPS/MHz. The PIC32MX3/4 family architecture provides single-cycle flash access, a hardware multiply/divide unit, and an 8-channel DMA controller that offloads data movement from the CPU. The dual-I2S block and dual SPI enable simultaneous audio and display interfaces without CPU intervention. Typical applications include industrial control (PLC I/O modules, sensor hubs), consumer electronics (home appliances with capacitive touch), USB peripherals (HID, CDC), audio accessories (USB speakers, soundbars), graphical user interfaces (PMP-driven TFT panels), and medical instrumentation (portable monitoring). The 512 KB Flash also supports connectivity stacks (TCP/IP via MLA libraries) and OTA-capable firmware. When designing with the PIC32MX470F512HT-I/PT, ensure the 2.3 V to 3.6 V supply is decoupled with 100 nF + 10 uF close to each VDD pin, and route the analog AVdd separately for ADC accuracy. The "T" suffix denotes tape-and-reel packaging, and the "-I" industrial temperature grade means -40C to +85C operation. This page synthesizes distributor pricing, pin-compatible PIC32MX drop-in alternatives, and practical design notes that augment the manufacturer datasheet with engineering context relevant to BOM consolidation and long-term availability planning.

Devis Contact
PIC32MX470F512HT-V/PT - 80MHz, 512KB Flash 32-bit MCU | Microchip
PIC32MX470F512HT-V/PT

PIC32MX470F512HT-V/PT - 80MHz, 512KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MX470F512HT-V/PT is a 32-bit MIPS32 M4K microcontroller with 512KB Flash and 128KB SRAM, operating up to 80MHz (with 120MHz/150 DMIPS capable family variants) in a 64-pin TQFP (10x10 mm) package. It integrates a USB 2.0 Full-Speed OTG controller, two I2S/SPI modules, Peripheral Pin Select (PPS), a Parallel Master Port (PMP), and a Charge Time Measurement Unit (CTMU) for HMI applications. A PIC32MX microcontroller is a 32-bit RISC MCU based on the MIPS32 M4K core, positioned between 8-bit PIC16/PIC18 microcontrollers and higher-end ARM Cortex-M devices. PIC32MX parts combine deterministic 32-bit performance with rich integrated peripherals (USB, I2S, PMP, CTMU), targeting embedded HMI, audio, USB-device, and graphics user-interface designs that outgrow 8-bit parts but do not need a Cortex-M4 application processor. Within the PIC32 family, MX4 subfamily devices add more memory and USB/HMI features compared to MX1/MX2; within MX4, the 470 variant is the largest-memory tier. Key features include up to 80MHz core clock, 1.56 DMIPS/MHz performance, 512KB Flash with 128KB RAM, 28 channels of 10-bit ADC, 5 PWM channels, 5 timers/counters, 4 UART modules, 2 I2C, 2 I2S, 2 SPI, USB 2.0 Full-Speed OTG, and Peripheral Pin Select (PPS) that remaps most digital peripherals to almost any I/O pin. The operating voltage range is 2.3V to 3.6V, and the industrial/extended operating temperature range is -40C to +105C, suitable for harsh-environment embedded systems. The architecture uses a single-core MIPS32 M4K 32-bit RISC pipeline with hardware multiply/divide and a tightly-coupled prefetch module for deterministic Flash execution. A 5-stage pipeline, branch delay slot, and dual-set associative SRAM allow sustained 1.56 DMIPS/MHz throughput. The integrated USB 2.0 Full-Speed OTG transceiver, dedicated DMA channels, and PMP graphics interface enable QVGA TFT display support without an external controller. Typical applications include USB peripherals (HID, CDC, MSD), audio playback with I2S codec interfaces, HMI touch panels using CTMU + 10-bit ADC, QVGA TFT LCD graphics with PMP, industrial control panels, and home automation controllers. The wide -40C to +105C temperature range and rich peripherals also fit automotive body electronics and white-goods user interfaces. When designing with this device, allocate sufficient Flash wait-state budgeting for the 80MHz core clock; use the PIC32 USB stack and Harmony framework firmware; and place a 12 MHz primary oscillator crystal within 1 cm of the OSC1/OSC2 pins with a guarded ground ring to meet USB electrical compliance. Always enable JTAG/ICSP debugging pads even on production boards to allow field firmware recovery. This page synthesizes distributor pricing, drop-in 64-pin TQFP alternatives, and practical design notes (PPS routing, USB layout, CTMU touch) that the manufacturer datasheet alone does not provide, giving procurement and design engineers a single reference for evaluation and second sourcing.

Devis Contact
PIC32MX470F512L-120/PT - 32-bit MCU, 120MHz, 512KB Flash | Microchip
PIC32MX470F512L-120/PT

PIC32MX470F512L-120/PT - 32-bit MCU, 120MHz, 512KB Flash | Microchip

The Microchip Technology PIC32MX470F512L-120/PT is a 32-bit RISC microcontroller based on the MIPS32 M4K core, delivering 120 MHz / 150 DMIPS performance with 512 KB of Flash program memory and 128 KB of SRAM, housed in a 100-pin TQFP (PT) package rated for the -40C to +105C industrial temperature range. The device operates from 2.3 V to 3.6 V and integrates a USB 2.0-compliant full-speed OTG controller, two I2S/SPI modules, Peripheral Pin Select (PPS), a Parallel Master Port (PMP) for graphics, and a Charge Time Measurement Unit (CTMU). A 32-bit microcontroller (MCU) is an integrated processor that combines a high-performance CPU core, on-chip memory (Flash for code and SRAM for data), and a rich set of peripherals (ADC, timers, communication controllers) onto a single silicon die. Within the broader semiconductor hierarchy, a 32-bit MCU sits between an 8/16-bit MCU and a microprocessor (MPU); its advantage is integrating deterministic real-time control with enough compute headroom for protocol handling and modest graphics. The PIC32MX3/4 family, including the PIC32MX470F512L, is pin-compatible with most PIC24 and dsPIC DSC devices, easing migration across Microchip's portfolio. Key features of the PIC32MX470F512L-120/PT include 512 KB of Flash, 128 KB of RAM, up to 82 I/O lines, an on-chip 10-bit ADC with up to 28 input channels, multiple UART, SPI, I2C, and I2S interfaces, two analog comparators, and a 5-bit CTMU for capacitive touch. A Fail-Safe Clock Monitor (FSCM) and multiple interrupt vectors with individually programmable priority support robust real-time systems. Architecturally, the MIPS32 M4K core is paired with a multi-vector interrupt controller, a peripheral bus bridge, and dedicated DMA, enabling deterministic response while sustaining high throughput. Hardware multiply/divide and a tightly-coupled prefetch buffer reduce instruction-cycle overhead; the bus matrix arbitrates between CPU, DMA, and peripheral traffic. Typical applications for this part include industrial control and HMI panels, USB device/host bridges, audio playback peripherals using I2S codecs, graphical user interfaces with PMP-driven TFTs, and consumer/embedded products requiring USB connectivity. The wide peripheral mix also suits data loggers, sensor hubs, and low-cost motor control reference platforms. Automotive-grade (-120V) variants extend the family into AEC-Q100 Grade 2 designs. A core design consideration is that the device operates at 2.3 V to 3.6 V; mixed-voltage peripherals need level shifters. Decoupling, trace impedance for USB DP-99D90/DM lines, and PMP timing closure are the most common board-level issues. JTAG/ICSP pin pairs (PGECx/PGEDx) must be assigned as matched pairs; both VDD/VSS rails must be bypassed per datasheet recommendations. This page synthesizes Microchip distributor pricing, same-family drop-in alternatives (PIC32MX570F512L, PIC32MX460F512L), and practical design notes not consolidated in the manufacturer's datasheet. Engineers evaluating pin-compatible replacements or sourcing for production will benefit from the structured comparison and decision guidance below.

Devis Contact
PIC32MX470F512L-I/PF - 32-Bit 80MHz 512KB Flash MCU | Microchip
PIC32MX470F512L-I/PF

PIC32MX470F512L-I/PF - 32-Bit 80MHz 512KB Flash MCU | Microchip

The Microchip PIC32MX470F512L-I/PF is a 32-bit MIPS M4K microcontroller delivering 80 MHz core speed (up to 100 MHz for the -120 speed grade variant) with 512 KB Flash and 128 KB SRAM, housed in a 100-pin TQFP (14x14 mm, PF) package. It integrates USB 2.0 full-speed OTG, two I2S/SPI, two I2C, up to six UART, a 10-bit 1 Msps ADC with up to 28 analog channels, two analog comparators, and a Parallel Master Port (PMP) for graphics and external memory interfaces. A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory, data memory, and configurable peripherals. The PIC32MX3/4 family sits in the hierarchy: microcontroller -> 32-bit MCU -> MIPS M4K core -> PIC32MX family -> Microchip 32-bit portfolio. These devices target human-machine interface (HMI), audio, USB connectivity, and advanced analog applications, bridging the gap between 8/16-bit MCUs and higher-cost application processors. Key features include five 16-bit timers/counters, five input capture and five output compare modules, a 16-bit Parallel Master Port, JTAG and 2-wire programming/debug, and an operating range of 2.3V to 3.6V. The industrial temperature grade (-I) supports -40C to +85C operation, suitable for commercial and industrial embedded designs. The peripheral set is engineered for low-power and connected applications where integration reduces BOM cost. Architecturally, the PIC32MX470 uses a Harvard-style MIPS32 M4K core with separate 32-bit instruction and data paths, hardware multiply/divide, and tightly-coupled peripherals accessible via a high-bandwidth bus matrix. Code execution is held in 512 KB Flash, while 128 KB SRAM supports large data buffers required for USB, audio streaming, or graphical UI rendering. Typical applications include USB audio devices (USB headphones, microphones, mixing consoles), HMI panels with touch and graphical LCDs, industrial control with USB logging, low-cost embedded instrumentation, and connected sensor hubs. The wide peripheral set allows a single chip to replace external logic, shrinking BOM and PCB area. When designing with this MCU, mind the 3.3V supply rail requirement, route the USB DP/DM pair with 90 ohm differential impedance, and reserve the I2S pins if audio streaming is needed. Decouple VDD/VSS pairs with 100 nF plus bulk capacitors near the package, and consult Microchip's PIC32MX3/4/5/6/7 family reference manual for peripheral configuration details. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and design notes not collected on the manufacturer datasheet to accelerate your selection of the PIC32MX470F512L-I/PF.

Devis Contact
PIC32MX470F512L-I/PT - 80MHz 32-bit MCU 512KB Flash | Microchip
PIC32MX470F512L-I/PT

PIC32MX470F512L-I/PT - 80MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MX470F512L-I/PT is a 32-bit MIPS M4K microcontroller running up to 80MHz (120MHz for the family), equipped with 512KB Flash and 128KB SRAM, integrated USB 2.0 OTG, and packaged in a 100-pin TQFP (PT, 12x12 mm). The PIC32MX3/4 family is positioned by Microchip for low-cost 32-bit performance with rich peripherals, including two SPI/I2S, five UARTs, two I2C, five 16-bit timers, a 10-bit ADC up to 1 Msps with 28 channels, two analog comparators, hardware RTCC, and Peripheral Pin Select (PPS) for flexible signal routing. What is a PIC32MX microcontroller? The PIC32MX is Microchip's MIPS-based 32-bit MCU family, succeeding the 16-bit PIC24/dsPIC lines. It combines a MIPS32 M4K core with on-chip Flash and SRAM, plus a peripheral set targeted at HMI, audio, USB, and advanced analog. Within the broader taxonomy, PIC32MX belongs to microcontroller -> 32-bit MCU -> embedded processor -> semiconductor. It bridges 8/16-bit MCU simplicity with 32-bit throughput. Key features include MIPS16e instruction mode for up to 40% smaller code footprint, four-channel hardware DMA with automatic data-size detection, dual I2S for audio, USB 2.0 Full-Speed OTG (Host/Device/OTG), CTMU for capacitive touch, and low-power Idle/Sleep modes with multiple wake sources. The 100-pin TQFP exposes 81 digital I/O via PPS remapping, allowing nearly any peripheral function to be assigned to any pin. The device runs from 2.3V to 3.6V (industrial -40C to +85C). An internal 8 MHz Fast RC oscillator with PLL supports the 80MHz core clock; a separate 31.25 kHz Low-Power RC drives the RTCC. Programming/debugging uses standard ICSP via PGECx/PGEDx pairs - any of the multiple pairs on the L-package may be used. Typical applications include USB peripherals (HID, CDC, MSD, audio), audio playback with I2S DACs, low-cost HMI with CTMU touch keys, industrial control with USB-serial bridges, and graphics/text TFT panels via PMP. The generous Flash and SRAM also support embedded web servers and IoT edge nodes. When designing, always reserve the Vcap pin for the internal 1.8V regulator, place 10uF + 0.1uF bulk ceramics adjacent to every VDD/VSS pair, and ensure the USB D+/D- lines are 90 ohm differential with a precision 1.5 kohm pull-up to Vbus (D+) for full-speed device mode. This page synthesizes current distributor pricing, same-family drop-in alternatives, and practical PCB design notes not found on Microchip's datasheet summary, enabling faster BOM decisions.

Devis Contact
PIC32MX470F512LT-120/PF - 120MHz 32-bit MCU 512KB Flash | Microchip
PIC32MX470F512LT-120/PF

PIC32MX470F512LT-120/PF - 120MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MX470F512LT-120/PF is a 32-bit MIPS MCU based on the MIPS32 M4K core, operating at up to 120 MHz (150 DMIPS), integrating 512 KB of Flash program memory and 128 KB of SRAM in a 100-pin TQFP (14x14 mm, 0.4 mm pitch) package. It is offered as the tape-and-reel ("T") shipping variant of the PIC32MX470F512L family and is part of the PIC32MX3/4 series that combines 32-bit performance with a rich peripheral set. Background Knowledge - what is a 32-bit MCU? A 32-bit microcontroller is a single-chip processor with a 32-bit data path, registers, and ALU, providing higher throughput, larger address space, and richer peripheral integration than 8-bit or 16-bit alternatives. Within the broader semiconductor taxonomy, PIC32MX devices are flash-based general-purpose MCUs that sit between 16-bit dsPIC and 32-bit SAM families. They are commonly deployed where an 8-bit MCU lacks headroom but a full application processor is unnecessary. Key features of the PIC32MX470F512LT-120/PF include a 5-stage pipelined MIPS32 M4K core with MIPS16e code compression (up to 40% smaller code), a 10-bit ADC with up to 28 analog input channels, two comparators, two I2C and two SPI/I2S ports, four UART modules, USB 2.0 full-speed On-The-Go (OTG), five PWM channels, two DMA channels, a 16-bit Parallel Master Port (PMP/EPMP) for graphics or external memory, CTMU for capacitive touch, RTCC with calendar, and Idle/Sleep low-power modes. It operates from 2.3 V to 3.6 V across the -40 C to +105 C industrial temperature range. Architecture and process - the device uses a 5-stage pipeline that allows single-cycle Flash access with prefetch, a multi-vectored interrupt controller, and an integrated 8 MHz FRC oscillator with PLL options up to 120 MHz. The peripheral set is accessed via separate APB and AHB-style buses, with DMA offload for ADC, UART, SPI, and I2C transactions. Code is executed directly from Flash with a prefetch cache, eliminating external memory for most embedded GUI and audio applications. Typical applications include industrial HMI with TFT-LCD panels, USB peripherals (HID, CDC, mass storage), audio processing up to MP3/AAC decode, capacitive touch keypads, IoT edge nodes with USB debugging, and graphical control panels on appliances and instrumentation. The combination of USB OTG and PMP graphics makes this MCU a popular choice for low-cost graphical HMI front panels. When designing with the PIC32MX470F512LT-120/PF, place decoupling capacitors (100 nF + bulk) close to every VDD/VSS pair, route the 12 MHz crystal traces symmetrically with grounded guard, and keep the USB DP/DM differential pair length-matched within 150 mil. The PMP data bus should be series-terminated if the panel cable exceeds 50 mm. MPLAB X IDE plus XC32 compiler provides a free toolchain. This page consolidates pricing tiers, drop-in PIC32MX alternatives, and design notes not found in the manufacturer datasheet to accelerate your design-in.

Devis Contact
PIC32MX470F512LT-120/PT - 120MHz 32-bit MCU 512KB Flash | Microchip
PIC32MX470F512LT-120/PT

PIC32MX470F512LT-120/PT - 120MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MX470F512LT-120/PT is a 32-bit MIPS M4K microcontroller running up to 120 MHz (150 DMIPS) with 512 KB Flash and 128 KB SRAM in a 100-pin TQFP (12x12 mm) package. The 'T' suffix indicates tape-and-reel packaging, and the operating-temperature suffix character is blank, denoting the standard 0C to +70C commercial range for this part variant. A 32-bit microcontroller (MCU) is an integrated circuit containing a 32-bit CPU core, program memory (Flash), data memory (SRAM), and a rich set of on-chip peripherals such as timers, communication controllers, and analog blocks. Within the broader hierarchy, MCUs sit under microcontrollers -> embedded processors -> semiconductors. The PIC32MX3/4 family sits at the upper end of the PIC32MX series and offers on-chip USB 2.0 Full-Speed, a 10-bit 1 Msps ADC, two I2S/SPIs, CTMU touch hardware, and RTCC - features aimed at human-machine-interface (HMI) and audio applications. Key features of this part include 120 MHz core clock with 150 DMIPS performance, 512 KB Flash program memory, 128 KB SRAM, 10/100 Ethernet MAC, two USB 2.0 Full-Speed controllers (one Host/Device/OTG and one Full-Speed Device), a Charge Time Measurement Unit (CTMU) for capacitive touch, an Real-Time Clock Calendar (RTCC), a Parallel Master Port (PMP), and up to five UART/I2C/SPI peripherals. The 100-TQFP package exposes 78 I/O pins and is pin-compatible with most PIC24/dsPIC devices at the same pitch. The M4K pipeline executes most instructions in a single cycle, delivering 1.25 DMIPS/MHz and supporting MIPS32 Release 2 ISA with DSP ASE for SIMD-style math. Hardware Multiply/Divide accelerates 32x32-bit operations in one cycle, and the dual-bank Flash allows live updates without downtime, useful for bootloader designs. Typical applications include USB peripherals, capacitive touch HMI panels, audio playback devices with USB or SD-card sources, industrial control front panels with Ethernet connectivity, and low-cost graphics terminals. The combination of USB, Ethernet, and 512 KB Flash is uncommon in this price tier, making the part a frequent choice for connected-embedded products. When designing with this part, plan pin assignments early because the USB and Ethernet PHYs each require several dedicated pins. Decouple VDD/VUSB with 100 nF ceramic capacitors close to the package, and follow Microchip's recommended 8 MHz crystal layout for the PLL to meet USB jitter specifications. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MX3/4 family, and practical design notes that complement the manufacturer datasheet.

Devis Contact
PIC32MX470F512LT-I/PF - 32-bit MCU 512KB Flash 100MHz TQFP-100 | Microchip
PIC32MX470F512LT-I/PF

PIC32MX470F512LT-I/PF - 32-bit MCU 512KB Flash 100MHz TQFP-100 | Microchip

The Microchip PIC32MX470F512LT-I/PF is a 32-bit MIPS M4K microcontroller delivering 120 MHz / 150 DMIPS performance, 512 KB Flash, and 128 KB SRAM in a 100-pin TQFP (14x14 mm) package. It integrates a USB 2.0 Full-Speed OTG controller, two I2S/SPI modules, two I2C ports, two analog comparators, a 28-channel 10-bit ADC, a Parallel Master Port, and a Charge Time Measurement Unit (CTMU) for HMI touch sensing. Operating from 2.3 V to 3.6 V with industrial temperature range -40C to +105C, this tape-and-reel variant targets cost-sensitive embedded designs that need rich peripherals without external expansion. A 32-bit microcontroller (MCU) is an integrated processor core with program memory (Flash), data memory (SRAM), and on-chip peripherals designed for real-time control of embedded systems. PIC32MX devices sit in the hierarchy: MCU -> 32-bit MCU -> MIPS M4K architecture -> PIC32 family -> PIC32MX3/4 sub-family -> PIC32MX470 variant. They compete in the space between traditional 8/16-bit MCUs and Cortex-M3 class devices, offering deterministic interrupt response with DSP-like arithmetic capability and a mature MPLAB X IDE toolchain. Key features include Peripheral Pin Select (PPS) for flexible digital I/O remapping, PMP for graphics interfaces, RTCC for real-time clock, four 16-bit timers, five IC/OC/PWM modules, two UART modules, and JTAG/ICSP debugging. The CTMU enables capacitive touch sensing for HMI panels, while the USB-OTG controller supports device, host, and On-The-Go roles - eliminating external bridge chips for HID, CDC, or mass-storage applications. Architecturally, the M4K core runs the MIPS32 instruction set with optional MIPS16e mode, achieving up to 40% code compression versus pure 32-bit code. The 100 MHz operation provides 76 CoreMark at typical conditions; Flash is single-cycle accessible via a tightly-coupled prefetch buffer, and SRAM includes DMA-friendly regions mapped to peripheral buses. Low-power Sleep and Idle modes cut quiescent current for battery-backed designs. Typical applications include USB peripherals (HID keypads, mass storage, CDC virtual COM ports), audio processing via I2S codec interfaces, HMI touch panels using CTMU, embedded graphics with PMP-connected LCDs, and industrial control loops needing 10-bit ADC with PWM outputs. The wide peripheral set lets one chip replace a discrete MCU plus USB controller. When designing with this device, ensure the 0.50 mm TQFP-100 footprint is compatible with your PCB assembly process and that the 2.3-3.6 V supply is well-decoupled with 100 nF + bulk capacitors placed within 5 mm of each VDD/VSS pair. The PPS system lets you remap peripherals after PCB fabrication, but plan pin usage early to avoid runtime conflicts. This page consolidates distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selecting the PIC32MX470F512LT-I/PF in production.

Devis Contact
PIC32MX470F512LT-I/PT - 32-bit MCU 512KB Flash 80MHz | Microchip
PIC32MX470F512LT-I/PT

PIC32MX470F512LT-I/PT - 32-bit MCU 512KB Flash 80MHz | Microchip

The Microchip Technology PIC32MX470F512LT-I/PT is a 32-bit MIPS32 M4K microcontroller delivering 80 MHz / 100 DMIPS performance with 512 KB Flash and 128 KB SRAM in a 100-pin TQFP (12x12 mm) package. It integrates two I2C, two SPI/I2S, USB 2.0 full-speed On-The-Go, two analog comparators, a 10-bit 1 Msps ADC with up to 28 channels, and a 16-bit Parallel Master Port (PMP) for graphics and external memory interfacing. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, program memory, data RAM, and configurable peripherals onto a single silicon die. MCUs sit at the heart of embedded systems, hierarchically: microcontroller -> embedded processor -> integrated circuit -> semiconductor. The PIC32MX family bridges 8/16-bit PIC legacy code with 32-bit throughput, enabling modern graphical user interfaces, connectivity stacks, and real-time control in cost-sensitive embedded products. Key differentiating features of this device include 5V-tolerant digital I/O (PIC digital heritage), a configurable 8 MHz internal FRC oscillator with PLL for system clock synthesis, and Microchip's Harmony and MPLAB XC32 toolchain support. The 80 MHz core with 1.56 DMIPS/MHz efficiency suits moderate-complexity control loops, while the integrated USB-OTG and PMP simplify peripheral interfacing. The PIC32MX4xx architecture pairs the MIPS M4K core with a multi-vector interrupt controller, 8-channel DMA, and Peripheral Pin Select (PPS) for flexible signal routing. The 100-pin TQFP exposes up to 85 remappable I/O, enabling designers to optimize pin assignments for board routing without rewiring firmware. The 10-bit ADC supports touch sensing and general-purpose analog measurement. Typical applications include industrial control panels, USB human-interface devices (HID), graphical LCDs with resistive touch, sensor hubs, and low-cost audio processing. Its 5V tolerance also suits 24V industrial logic-level translation and automotive aftermarket designs. When designing with this part, ensure the 3.3V core rail is decoupled with 100 nF plus 10 µF bulk capacitors within 5 mm of the supply pins. The PLL input reference must come from a low-jitter source if USB full-speed or audio bit-clock accuracy is required. This page synthesizes distributor pricing, drop-in TQFP-100 alternatives, and practical design notes not found in the standalone datasheet, enabling faster BOM decisions and lifecycle planning.

Devis Contact
PIC32MX470F512LT-I/TL - 32-bit MCU, 512KB Flash, USB | Microchip
PIC32MX470F512LT-I/TL

PIC32MX470F512LT-I/TL - 32-bit MCU, 512KB Flash, USB | Microchip

The Microchip Technology PIC32MX470F512LT-I/TL is a 32-bit MIPS32 M4K microcontroller operating up to 100 MHz, delivering 100 MIPS performance with 512 KB of Flash program memory and 128 KB of SRAM, housed in a 124-pin VTLA (9x9 mm) surface-mount package. It integrates a USB 2.0 full-speed OTG controller, two I2C, two SPI/I2S, five UART, and a 28-channel 10-bit ADC with dual analog comparators, targeting complex embedded designs that require high feature integration in a single chip. A 32-bit MCU (microcontroller unit) is an integrated circuit combining a 32-bit processor core with program memory (Flash), working memory (RAM), and a fixed set of peripherals such as timers, ADCs, and communication controllers on one die. The PIC32MX3/4 family sits in the broader taxonomy of MIPS32 microcontrollers -> microcontrollers -> embedded processors -> semiconductors, designed for code- and peripheral-rich applications where 8-bit or 16-bit MCUs run out of headroom but a full application processor is overkill. Key features of this device include 512 KB single-cycle Flash with prefetch cache to mask Flash latency, 128 KB RAM suitable for USB frame buffers and audio sample buffers, a 10/100 Ethernet RMII interface on selected variants, an on-chip 28-channel 1 MSPS 10-bit ADC, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. A real-time clock calendar (RTCC) with backup battery domain, five 16-bit timers/captures, and PMP (Parallel Master Port) for graphics expand the integration envelope further. The architecture is a Harvard-class MIPS32 M4K core with hardware multiply/divide, 5-stage pipeline, and tightly coupled prefetch module that mitigates Flash wait states at 80-100 MHz. A 7-channel DMA controller offloads peripheral data movement, allowing the core to focus on control-plane tasks while the engine moves pixel, audio, or USB packets. Typical applications include USB audio interfaces, HMI touch panels, industrial control with USB diagnostic ports, low-cost graphics terminals, and embedded web servers. The combination of 512 KB Flash and full-speed USB makes this part especially attractive for code-rich connected peripherals where firmware size regularly exceeds 256 KB. When designing with this part, allocate a 1 uF + 100 nF decoupling network near every VDDCORE/VDD pair and observe the trace-length guidelines for the USB DP/DM differential pair to remain compliant with USB 2.0 full-speed signalling. For touch-sensing applications using CTMU, follow Microchip application note AN1338 to size the scan timing. This page synthesizes distributor stock and pricing, same-family drop-in alternatives, and practical design notes for the VTLA-124 footprint not all of which appear on the manufacturer product page.

Devis Contact
PIC32MX470F512LT-V/PF - 80MHz 32-Bit MCU 512KB Flash | Microchip
PIC32MX470F512LT-V/PF

PIC32MX470F512LT-V/PF - 80MHz 32-Bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MX470F512LT-V/PF is a 32-bit MIPS MCU from the PIC32MX4 family, featuring a 80MHz M4K core, 512KB Flash, 128KB SRAM, and a 100-pin TQFP package. It integrates 2 analog comparators, 2 I2C, 2 SPI/I2S, and 28 ADC channels, balancing 32-bit performance with low power consumption. A microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable peripherals. PIC32MX devices sit in the taxonomy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS M4K architecture -> Microchip PIC32 family. The 32-bit M4K core delivers up to 120 MHz / 150 DMIPS at the family level, with this specific -V variant rated for 80 MHz operation. This enables efficient execution of RTOS, USB stacks, and graphics libraries. Key features include 512KB on-chip Flash (512K x 8), 128KB SRAM, USB 2.0 Full-Speed OTG, 4-channel DMA, two I2C, two SPI/I2S, five UART, two analog comparators, 28-channel 10-bit ADC at 1 Msps, parallel master port (PMP) for external bus/display, and 5 16-bit timers. The 100-pin TQFP package (14x14 mm) gives ample GPIO (78+ I/O) for human-machine interface, motor control, and connectivity applications. The device uses the Harvard architecture with separate 32-bit instruction and 8/16/32-bit data paths, plus hardware multiply/divide and DSP extensions. A 1.5-cycle interrupt latency and vectored interrupt controller support deterministic real-time response, while the PMP and DMA enable display and high-throughput data movement offloading the core. Typical applications include industrial control panels, USB device/host peripherals, CAN-bridge gateways, low-cost graphics HMI, multi-protocol sensor hubs, and consumer appliances needing 32-bit performance without stepping up to Cortex-M3/M4 parts. The wide peripheral set reduces external chip count, simplifying BOM. Design consideration: the -V temperature grade (V denotes -40C to +105C) means this part is qualified for industrial-thermal-range applications but NOT AEC-Q100 automotive; choose PIC32MX470F512LT-120I/PF or family AEC-Q100 qualified siblings for harsh environments. This page synthesizes cross-reference alternatives, distributor pricing snapshots, and design notes not collated on the manufacturer datasheet - useful for BOM and second-source decisions.

Devis Contact
PIC32MX470F512LT-V/PT - 80MHz 512KB Flash 32-bit MCU | Microchip
PIC32MX470F512LT-V/PT

PIC32MX470F512LT-V/PT - 80MHz 512KB Flash 32-bit MCU | Microchip

The Microchip PIC32MX470F512LT-V/PT is a 32-bit MIPS M4K microcontroller operating at 80 MHz with 512 KB Flash and 128 KB SRAM, packaged in a 100-pin TQFP (PT) 12x12 mm form factor. This automotive-grade (-V suffix) variant targets designs that require an extended temperature range of -40C to +105C while preserving full peripheral integration. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions on 32-bit data paths, combining a CPU core, program memory (Flash), data memory (SRAM), and on-chip peripherals such as timers, communication controllers, and ADCs on a single silicon die. The PIC32MX3/4 family, which includes this part, occupies the mid-performance tier of Microchip's PIC32 portfolio, between the cost-optimized PIC32MX1/2/5 and the higher-end PIC32MX5/6/7 families with USB and graphics support. Key specifications of the PIC32MX470F512LT-V/PT include 512 KB on-chip Flash (512K x 8 organization), 128 KB SRAM, a 10-bit ADC with up to 1 Msps, USB 2.0 Full-Speed OTG controller, two I2S/SPI modules, Peripheral Pin Select (PPS) for flexible signal routing, Parallel Master Port (PMP) for graphics or external memory, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. The IC operates from 2.3V to 3.6V across the -40C to +105C industrial-automotive temperature range. Architecturally, the PIC32MX470 uses a MIPS32 M4K core with 5-stage pipeline, single-cycle multiply, hardware divide, and a tightly-coupled prefetch module that minimizes Flash wait states at 80 MHz. The dual-bus DMA controller with 4 KB RAM and integrated FRC PLL simplify clock design. PPS allows most digital peripherals to be remapped to a wide range of I/O pins, simplifying PCB layout and reducing the need for board re-spins. Typical applications include USB Human Interface Devices (HIDs) such as keyboards and mice, embedded audio peripherals with I2S codecs, capacitive touch HMI panels using CTMU, low-cost graphics terminals via PMP, industrial sensor hubs, and automotive body-control modules where the -V temperature grade is required. When designing with this part, plan I/O assignment early to leverage Peripheral Pin Select and reserve dedicated pins for the 8 MHz crystal and the JTAG/trace interface. A 10 uF bulk plus 0.1 uF decoupling capacitor pair should sit within 5 mm of each VDD/AVDD pin pair. This page consolidates the verified Microchip datasheet, distributor pricing, drop-in same-package alternatives drawn from the PIC32MX portfolio, and design notes drawn from PIC32 Family Reference Manual application patterns.

Devis Contact