PIC32MX470F512LT-I/TL - 32-bit MCU, 512KB Flash, USB | Microchip
Référence : PIC32MX470F512LT-I/TL ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $9.01 | $9,01 |
| 10 | $8.11 | $81,10 |
| 100 | $7.21 | $721,00 |
| 500 | $6.41 | $3 205,00 |
| 1 000 | $5.68 | $5 680,00 |
PIC32MX470F512LT-I/TL Présentation
A 32-bit MCU (microcontroller unit) is an integrated circuit combining a 32-bit processor core with program memory (Flash), working memory (RAM), and a fixed set of peripherals such as timers, ADCs, and communication controllers on one die. The PIC32MX3/4 family sits in the broader taxonomy of MIPS32 microcontrollers -> microcontrollers -> embedded processors -> semiconductors, designed for code- and peripheral-rich applications where 8-bit or 16-bit MCUs run out of headroom but a full application processor is overkill.
Key features of this device include 512 KB single-cycle Flash with prefetch cache to mask Flash latency, 128 KB RAM suitable for USB frame buffers and audio sample buffers, a 10/100 Ethernet RMII interface on selected variants, an on-chip 28-channel 1 MSPS 10-bit ADC, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. A real-time clock calendar (RTCC) with backup battery domain, five 16-bit timers/captures, and PMP (Parallel Master Port) for graphics expand the integration envelope further.
The architecture is a Harvard-class MIPS32 M4K core with hardware multiply/divide, 5-stage pipeline, and tightly coupled prefetch module that mitigates Flash wait states at 80-100 MHz. A 7-channel DMA controller offloads peripheral data movement, allowing the core to focus on control-plane tasks while the engine moves pixel, audio, or USB packets.
Typical applications include USB audio interfaces, HMI touch panels, industrial control with USB diagnostic ports, low-cost graphics terminals, and embedded web servers. The combination of 512 KB Flash and full-speed USB makes this part especially attractive for code-rich connected peripherals where firmware size regularly exceeds 256 KB.
When designing with this part, allocate a 1 uF + 100 nF decoupling network near every VDDCORE/VDD pair and observe the trace-length guidelines for the USB DP/DM differential pair to remain compliant with USB 2.0 full-speed signalling. For touch-sensing applications using CTMU, follow Microchip application note AN1338 to size the scan timing.
This page synthesizes distributor stock and pricing, same-family drop-in alternatives, and practical design notes for the VTLA-124 footprint not all of which appear on the manufacturer product page.
Alternatives de remplacement direct pour PIC32MX470F512LT-I/TL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MX470F512LT-I/TL (même facteur de forme et même empreinte) — différant par DMA Channels, Package, ADC, Core Architecture, USB.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MX470F512LT-120I/TL
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MX470F512LT-I/PT
✅ Remplacement direct✓ En stock
$5.84 / unité
Voir la fiche technique →PIC32MX470F512L-I/PT
✅ Remplacement direct✓ En stock
$6.32 / unité
Voir la fiche technique →PIC32MX450F256LT-I/TL
✅ Remplacement direct✓ En stock
$5.78 / unité
Voir la fiche technique →PIC32MX370F512L-V/TL
✅ Remplacement direct✓ En stock
$5.58 / unité
Voir la fiche technique →PIC32MX470F512LT-I/TL Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 M4K |
| Core Count | 1 |
| Largeur du bus de données | 32-bit |
| Maximum Clock Speed | 100 MHz |
| Performance | 100 MIPS (150 DMIPS capable per family) |
| Flash Program Memory | 512 KB (512K x 8) |
| SRAM | 128 KB |
| Boîtier | 124-pin VTLA (9x9 mm) |
| Température de fonctionnement | -40C to +85C (Industrial -I) |
| USB Interface | USB 2.0 Full-Speed OTG |
| ADC | 10-bit, 28-channel, 1 MSPS |
| Analog Comparators | 2 |
| I2C | 2 |
| SPI / I2S | 2 |
| UART | 5 |
| DMA Channels | 7 |
| Timers | 5 x 16-bit |
| Supply Voltage (VDD) | 2.3 V to 3.6 V |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
| Touch Sensing (CTMU) | Yes |
| RTCC (Real-Time Clock) | Yes |
Configuration des broches de PIC32MX470F512LT-I/TL
| Broche 1 | RA0 — General purpose I/O / AN0 / CVREF- |
| Broche 2 | RA1 — General purpose I/O / AN1 / CVREF+ |
| Broche 3 | RA2 — General purpose I/O / AN2 |
| Broche 4 | RA3 — General purpose I/O / AN3 / VREF- |
| Broche 5 | RA4 — General purpose I/O / AN4 / VREF+ |
| Broche 6 | RA5 — General purpose I/O / AN5 |
| Broche 7 | RA6 — General purpose I/O |
| Broche 8 | RA7 — General purpose I/O |
| Broche 9 | RA8 — General purpose I/O |
| Broche 10 | RA9 — General purpose I/O |
| Broche 11 | RA10 — General purpose I/O |
| Broche 12 | RB0 — General purpose I/O / PGED1 |
| Broche 13 | RB1 — General purpose I/O / PGEC1 |
| Broche 14 | RB2 — General purpose I/O |
| Broche 15 | RB3 — General purpose I/O |
| Broche 16 | RB4 — General purpose I/O |
| Broche 17 | RB5 — General purpose I/O / AN7 |
| Broche 18 | RB6 — General purpose I/O / AN8 |
| Broche 19 | RB7 — General purpose I/O / AN9 |
| Broche 20 | RB8 — General purpose I/O / AN10 |
| Broche 21 | RB9 — General purpose I/O / AN11 |
| Broche 22 | RB10 — General purpose I/O |
| Broche 23 | RB11 — General purpose I/O |
| Broche 24 | RB12 — General purpose I/O |
| Broche 25 | RB13 — General purpose I/O |
| Broche 26 | RB14 — General purpose I/O / CVREF-/AN14 |
| Broche 27 | RB15 — General purpose I/O / AN12 |
| Broche 28 | VSS — Ground |
| Broche 29 | VDD — I/O supply (2.3-3.6 V) |
| Broche 30 | RC1 — General purpose I/O / AN15 |
| Broche 31 | RC2 — General purpose I/O / AN16 |
| Broche 32 | RC3 — General purpose I/O / AN17 |
| Broche 33 | RC4 — General purpose I/O |
| Broche 34 | VDD — I/O supply |
| Broche 35 | VSS — Ground |
| Broche 36 | RC5 — General purpose I/O |
| Broche 37 | RC6 — General purpose I/O |
| Broche 38 | RC7 — General purpose I/O |
| Broche 39 | RC8 — General purpose I/O |
| Broche 40 | RC9 — General purpose I/O |
| Broche 41 | RC10 — General purpose I/O |
| Broche 42 | RC11 — General purpose I/O |
| Broche 43 | RC12 — General purpose I/O |
| Broche 44 | RC13 — General purpose I/O |
| Broche 45 | RC14 — General purpose I/O |
| Broche 46 | RC15 — General purpose I/O |
| Broche 47 | VSS — Ground |
| Broche 48 | VDD — I/O supply |
| Broche 49 | RD0 — General purpose I/O |
| Broche 50 | RD1 — General purpose I/O |
| Broche 51 | RD2 — General purpose I/O |
| Broche 52 | RD3 — General purpose I/O |
| Broche 53 | RD4 — General purpose I/O |
| Broche 54 | RD5 — General purpose I/O |
| Broche 55 | RD6 — General purpose I/O |
| Broche 56 | RD7 — General purpose I/O |
| Broche 57 | RD8 — General purpose I/O |
| Broche 58 | RD9 — General purpose I/O |
| Broche 59 | RD10 — General purpose I/O |
| Broche 60 | RD11 — General purpose I/O |
| Broche 61 | RD12 — General purpose I/O |
| Broche 62 | RD13 — General purpose I/O |
| Broche 63 | RD14 — General purpose I/O |
| Broche 64 | RD15 — General purpose I/O |
| Broche 65 | VSS — Ground |
| Broche 66 | VDD — I/O supply |
| Broche 67 | RE0 — General purpose I/O / PMRD |
| Broche 68 | RE1 — General purpose I/O / PMWR |
| Broche 69 | RE2 — General purpose I/O |
| Broche 70 | RE3 — General purpose I/O |
| Broche 71 | RE4 — General purpose I/O |
| Broche 72 | RE5 — General purpose I/O |
| Broche 73 | RE6 — General purpose I/O |
| Broche 74 | RE7 — General purpose I/O |
| Broche 75 | RF0 — General purpose I/O |
| Broche 76 | RF1 — General purpose I/O |
| Broche 77 | RF2 — General purpose I/O |
| Broche 78 | RF3 — General purpose I/O |
| Broche 79 | RF4 — General purpose I/O |
| Broche 80 | RF5 — General purpose I/O |
| Broche 81 | RF6 — General purpose I/O |
| Broche 82 | RF7 — General purpose I/O |
| Broche 83 | RF8 — General purpose I/O |
| Broche 84 | VSS — Ground |
| Broche 85 | VDD — I/O supply |
| Broche 86 | RG0 — General purpose I/O |
| Broche 87 | RG1 — General purpose I/O |
| Broche 88 | RG2 — General purpose I/O |
| Broche 89 | RG3 — General purpose I/O |
| Broche 90 | RG6 — General purpose I/O |
| Broche 91 | RG7 — General purpose I/O |
| Broche 92 | RG8 — General purpose I/O |
| Broche 93 | RG9 — General purpose I/O |
| Broche 94 | VDD — I/O supply |
| Broche 95 | VSS — Ground |
| Broche 96 | RH0 — General purpose I/O / AN18 |
| Broche 97 | RH1 — General purpose I/O / AN19 |
| Broche 98 | RH2 — General purpose I/O / AN20 |
| Broche 99 | RH3 — General purpose I/O / AN21 |
| Broche 100 | RH4 — General purpose I/O / AN22 |
| Broche 101 | RH5 — General purpose I/O / AN23 |
| Broche 102 | RH6 — General purpose I/O / AN24 |
| Broche 103 | RH7 — General purpose I/O / AN25 |
| Broche 104 | RH8 — General purpose I/O / AN26 |
| Broche 105 | RH9 — General purpose I/O / AN27 |
| Broche 106 | RH10 — General purpose I/O |
| Broche 107 | RH11 — General purpose I/O |
| Broche 108 | VSS — Ground |
| Broche 109 | VDD — I/O supply |
| Broche 110 | RJ0 — General purpose I/O |
| Broche 111 | RJ1 — General purpose I/O |
| Broche 112 | RJ2 — General purpose I/O |
| Broche 113 | RJ3 — General purpose I/O |
| Broche 114 | RJ4 — General purpose I/O |
| Broche 115 | RJ5 — General purpose I/O |
| Broche 116 | RJ6 — General purpose I/O |
| Broche 117 | RJ7 — General purpose I/O |
| Broche 118 | RJ8 — General purpose I/O |
| Broche 119 | RJ9 — General purpose I/O |
| Broche 120 | RJ10 — General purpose I/O |
| Broche 121 | RJ11 — General purpose I/O |
| Broche 122 | VDD — I/O supply |
| Broche 123 | VSS — Ground |
| Broche 124 | EPAD — Exposed thermal pad - tie to VSS for thermal dissipation |
Applications typiques
PIC32MX470F512LT-I/TL convient pour 6 applications: USB Audio Interface, Human-Machine Interface (HMI) Touch Panel, Industrial Control with USB Diagnostic Port, Low-Cost Graphics Terminal, Embedded Web Server / IoT Gateway, Medical Data Acquisition Device.
USB Audio Interface
The PIC32MX470F512LT-I/TL's USB 2.0 Full-Speed OTG controller, 128 KB SRAM, and 512 KB Flash make it ideal for USB audio class 1.0/2.0 implementations. The 100 MIPS MIPS32 M4K core has sufficient headroom to run the USB stack plus ASIO/WAV processing while sustaining 48 kHz stereo isochronous streams. The 28-channel ADC doubles as an analog mixer input sampler. Place the device with the DP/DM pair routed as a 90-ohm differential and decouple VUSB with 1 uF + 100 nF; power dissipation typically stays below 300 mW at full USB throughput.
Recommandé
Human-Machine Interface (HMI) Touch Panel
The on-chip CTMU and 28-channel ADC make this MCU a strong fit for capacitive touch HMI panels without an external touch controller. The 100 MHz core and 512 KB Flash can run a graphics UI library plus the touch-scanning algorithm, while 128 KB RAM is sufficient for double-buffered framebuffers driving a 320x240 TFT via PMP. The Ethernet RMII enables remote monitoring of the panel. Combined power draw at 100 MHz with active ADC scanning is typically under 60 mA at 3.3 V.
Recommandé
Industrial Control with USB Diagnostic Port
The PIC32MX470F512LT-I/TL suits industrial controllers needing firmware-update and diagnostics over USB plus Ethernet connectivity to a SCADA network. Five UARTs allow simultaneous RS-232/RS-485 fieldbus links, while the 128 KB RAM buffers incoming Modbus TCP packets. Industrial -40C to +85C operation is supported by the -I suffix. Critical design note: provide a supervisor and watchdog (built-in) for brown-out recovery and use the 5 UARTs to bridge USB-CDC to legacy RS-485 peripherals.
Recommandé
Low-Cost Graphics Terminal
The PIC32MX470F512LT-I/TL's PMP peripheral and 512 KB Flash enable a low-cost monochrome or color graphics terminal at up to QVGA resolution. The 100 MHz MIPS32 M4K drives text rendering, menus, and BMP icons without external graphics hardware. The Ethernet RMII allows connection to host systems over TCP, and USB OTG supports keyboard / mouse input. RAM usage for a QVGA framebuffer (320x240x16bpp = 150 KB) fits within the 128 KB SRAM budget for partial-screen updates.
Recommandé
Embedded Web Server / IoT Gateway
This MCU fits IoT gateways that need Ethernet, USB device, and ample code space for an embedded TCP/IP stack (TCP, HTTP, MQTT, TLS). The 512 KB Flash holds a full NetBIOS/HTTP server with TLS handshake buffers, and the 7-channel DMA offloads Ethernet packet movement. The 100 MHz core maintains TLS handshake within acceptable latencies for sensor polling loops. Use the on-chip RTCC plus a 32.768 kHz crystal for time-stamping telemetry when the network drops.
Recommandé
Medical Data Acquisition Device
The 10-bit 1 MSPS ADC, dual analog comparators, and USB OTG make this part suitable for portable medical monitoring peripherals such as pulse oximeters, ECG acquisition modules, and body-temperature loggers. The 28 ADC channels accept multi-sensor inputs, and USB OTG provides tethered data transfer or battery charging. Industrial -40C to +85C temperature range supports field deployment. Note that medical safety certification (IEC 60601) is the responsibility of the system integrator, not the MCU.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MX470F512LT-I/TL — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MX470F512LT-120I/TL | PIC32MX470F512LT-I/PT | PIC32MX470F512L-I/PT | PIC32MX450F256LT-I/TL | PIC32MX370F512L-V/TL |
|---|---|---|---|---|---|---|
| Package | 124-pin VTLA (9x9 mm) | 124-pin VTLA (9x9 mm) - same | 100-pin TQFP - different | 100-pin TQFP - different | 124-pin VTLA (9x9 mm) - same | 124-pin VTLA (9x9 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Architecture | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K |
| Max Clock Speed | 100 MHz | 120 MHz | 100 MHz | 100 MHz | 100 MHz | 80 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 32 KB | 128 KB |
| USB Interface | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed Device | USB 2.0 Full-Speed OTG |
| Ethernet | 10/100 RMII | 10/100 RMII | No (100-pin no Ethernet) | No (100-pin no Ethernet) | No | No |
| ADC Channels | 28 | 28 | 14 (100-pin limited) | 14 (100-pin limited) | 28 | 28 |
Principaux différenciateurs
- Largest Flash + RAM in the VTLA-124 footprint (vs PIC32MX450F256LT-I/TL)
- Higher speed grade option with same footprint (vs PIC32MX470F512LT-120I/TL)
- Dual-package family member (VTLA-124 and TQFP-100) (vs PIC32MX470F512LT-I/PT)
Notes de conception
Place a 1 uF ceramic + 100 nF decoupling pair within 6 mm of every VDD/VSS pin pair on the PIC32MX470F512LT-I/TL, plus a 4.7 uF bulk capacitor near the IC. The VDDCORE pin (internal 1.8 V LDO output) requires its own 1 uF + 100 nF per the Microchip datasheet; failure to bypass the core rail causes Flash wait-state errors and brown-out resets at 100 MHz operation.
Route the USB DP/DM pair as a 90-ohm differential with no splits, keep the pair length under 50 mm, and place the VUSB decoupling cap within 2 mm of the VUSB pin. For Ethernet RMII, route the 50 MHz reference clock with 50-ohm controlled impedance and keep RMII traces under 50 mm - longer traces cause setup/hold violations on the Ethernet MAC.
Estimated: at 100 MHz, 3.3 V VDD, with all peripherals active, the PIC32MX470F512LT-I/TL draws approximately 65-75 mA (215-248 mW). The 124-pin VTLA 9x9 mm package has a thermal resistance of approximately 28 C/W to the exposed pad; tie the EPAD to a continuous VSS copper pour of at least 1 square inch to stay within the -40C to +85C industrial temperature range.
Do not skip the configuration of the configuration words - an unconfigured MCU will run but with brown-out and watchdog in undefined states. Always set the JTAG enable bit and the boot vector correctly per the family datasheet. For PMP graphics applications, the PMALL/PMAH/PMDIN/PMDOUT registers require precise timing; consult Microchip application note AN1365 for the chosen TFT controller.
Informations de conformité
RoHS and REACH compliant per Microchip product page. Industrial -40C to +85C temperature grade per -I suffix. AEC-Q100 not applicable - this is a general-purpose MCU, not automotive-qualified.