Connecteurs USB

FUSB302MPX

FUSB302MPX - USB Type-C Controller with PD | onsemi

The onsemi FUSB302MPX is a programmable USB Type-C controller with Power Delivery (PD) support, operating from a 2.8V to 5.5V supply and packaged in a 14-pin MLP (2.5x2.5 mm) package with exposed pad. It is a USB 3.1 companion USB interface IC designed to implement the USB Type-C connection management and Power Delivery protocol layers. A USB Type-C controller is a dedicated interface IC that manages the CC (Configuration Channel) lines of a USB Type-C connector. In the system hierarchy, it sits between the USB power path / USB 3.1 physical connector and the host microcontroller, handling attach detection, cable orientation, role swap, and PD message negotiation so the application processor does not need to bit-bang the PD protocol. Key features of the FUSB302MPX include full USB Type-C CC-line termination and detection, a full-featured PD PHY supporting BMC (Biphase Mark Coding) signaling on the CC line, an I2C slave interface for host control, and integrated VCONN support for powering electronically marked cables. The programmable architecture lets firmware implement sink, source, or dual-role power policies in software. Technically, the device integrates a PD transceiver with BMC encoding/decoding, comparator-based CC voltage monitoring for attach and orientation detection, and register-based configuration accessible over I2C at up to 400 kHz clock rates. The exposed-pad MLP-14 package provides low thermal impedance and short trace lengths, which benefits CC-line signal integrity at BMC data rates. RoHS-compliant, lead-free construction supports modern environmental requirements. Typical applications include USB Type-C power adapters and chargers, smartphone and tablet port controllers, notebook and dock power negotiation, power banks with PD sink input, and monitor or display-port alternate-mode designs. In each case the FUSB302MPX handles CC attach detection and PD contract negotiation while the system MCU manages the actual power conversion stage. A key design consideration: onsemi explicitly recommends the FUSB302BMPX for new designs; the FUSB302B family incorporates updates aligned to later USB-C specification releases, and per onsemi the B version is a drop-in replacement requiring no software optimization. This page adds value beyond the manufacturer datasheet by synthesizing distributor availability, drop-in alternative guidance, design notes, and comparison data in one engineer-oriented reference.