USB Connectors
بەرهەمەکان (4)
FUSB302MPX - USB Type-C Controller with PD | onsemi
The onsemi FUSB302MPX is a programmable USB Type-C controller with Power Delivery (PD) support, operating from a 2.8V to 5.5V supply and packaged in a 14-pin MLP (2.5x2.5 mm) package with exposed pad. It is a USB 3.1 companion USB interface IC designed to implement the USB Type-C connection management and Power Delivery protocol layers. A USB Type-C controller is a dedicated interface IC that manages the CC (Configuration Channel) lines of a USB Type-C connector. In the system hierarchy, it sits between the USB power path / USB 3.1 physical connector and the host microcontroller, handling attach detection, cable orientation, role swap, and PD message negotiation so the application processor does not need to bit-bang the PD protocol. Key features of the FUSB302MPX include full USB Type-C CC-line termination and detection, a full-featured PD PHY supporting BMC (Biphase Mark Coding) signaling on the CC line, an I2C slave interface for host control, and integrated VCONN support for powering electronically marked cables. The programmable architecture lets firmware implement sink, source, or dual-role power policies in software. Technically, the device integrates a PD transceiver with BMC encoding/decoding, comparator-based CC voltage monitoring for attach and orientation detection, and register-based configuration accessible over I2C at up to 400 kHz clock rates. The exposed-pad MLP-14 package provides low thermal impedance and short trace lengths, which benefits CC-line signal integrity at BMC data rates. RoHS-compliant, lead-free construction supports modern environmental requirements. Typical applications include USB Type-C power adapters and chargers, smartphone and tablet port controllers, notebook and dock power negotiation, power banks with PD sink input, and monitor or display-port alternate-mode designs. In each case the FUSB302MPX handles CC attach detection and PD contract negotiation while the system MCU manages the actual power conversion stage. A key design consideration: onsemi explicitly recommends the FUSB302BMPX for new designs; the FUSB302B family incorporates updates aligned to later USB-C specification releases, and per onsemi the B version is a drop-in replacement requiring no software optimization. This page adds value beyond the manufacturer datasheet by synthesizing distributor availability, drop-in alternative guidance, design notes, and comparison data in one engineer-oriented reference.
TPS25810RVCR - 3A USB Type-C Source Controller | TI
Texas Instruments TPS25810RVCR is a USB Type-C downstream-facing port source controller with an integrated 3 A power switch, VCONN support, and load detection, supplied in a 20-pin WQFN RVC package. The device is intended for USB Type-C host ports and supports an operating supply range of 4.5 V to 6.5 V over a -40 °C to 125 °C temperature range. Its integrated switch reduces the number of separate power-path components required in a Type-C source design. A USB Type-C source controller is an interface IC that manages the behavior of a USB Type-C downstream-facing port. It coordinates source-side power delivery, supports the VCONN supply used by powered accessories and cables, and can include load-detection functions. In the broader hierarchy, the TPS25810 belongs to the USB Type-C interface-controller family within interface ICs and broader power-management and connectivity systems. The primary specifications visible in the verified manufacturer and distributor data identify the part as a 3 A USB power switch and USB Type-C source controller. VCONN support allows the system to provide a controlled auxiliary supply to compatible USB Type-C accessories. Load detection provides the controller with information for evaluating the connected load. The RVC package contains 20 pins and uses surface-mount construction. The TPS25810RVCR is specified for a 4.5 V to 6.5 V operating supply range, making it suitable for systems that derive their operating rail from a 5 V USB or power-management subsystem. The manufacturer part-details data identifies a -40 °C to 125 °C operating-temperature range. This combination supports consumer, industrial, and embedded USB Type-C host implementations where a compact integrated source path is valuable. Typical applications include USB Type-C downstream-facing ports in docking stations, laptop accessories, monitors, industrial HMI panels, power adapters with Type-C outputs, and embedded USB-C charging or connectivity ports. In a typical implementation, the controller interfaces with the USB Type-C connector and system logic while the integrated 3 A switch controls the source power path. Designers should verify the connector, cable-current rating, VCONN load limits, thermal performance, and all protection requirements against the manufacturer datasheet before releasing a production PCB. The verified search data does not expose the complete pin table, electrical limits, timing values, or detailed application circuit, so those values should not be inferred from the distributor summaries. This product page consolidates verified manufacturer, distributor, and cross-reference information with practical selection guidance and engineering caveats. It distinguishes documented capabilities from unavailable technical details and avoids presenting unverified performance figures as manufacturer specifications.
TS3USB221AQRSERQ1 - USB 2.0 1:2 Mux/Demux Switch | Texas Instruments
The Texas Instruments TS3USB221AQRSERQ1 is an ESD-protected, high-speed USB 2.0 (480-Mbps) 1:2 multiplexer/demultiplexer analog switch in a 10-pin UQFN (2.0 mm x 1.5 mm) package. It operates from a 2.3 V to 3.6 V supply, accepts I/O signals up to 5.5 V, and delivers a typical 1 GHz (900 MHz for the A-Q1 automotive grade) signal bandwidth, making it purpose-built for routing high-speed USB 2.0 differential pairs in space-constrained systems. A USB switch, also called a USB mux or DPDT analog switch, is a special-purpose analog switch IC that routes differential D+ and D- signal pairs from one USB host or controller to one of multiple downstream ports. In the system hierarchy, it sits between the USB PHY/controller and the USB connectors, complementing power management and ESD protection ICs in the connectivity signal chain. Such switches are essential when a hub or application processor has limited USB I/O ports that must be shared among several connectors. Key features of the TS3USB221AQRSERQ1 include an on-resistance of 6 ohm maximum with a typical delta rON of 0.2 ohm, low ON-state capacitance of 6 pF maximum (CIO), and 1.8 V-compatible control-pin inputs that simplify interfacing with low-voltage GPIO. When the OE pin disables the device, it enters a low-power mode drawing only 1 uA, and total power consumption is 30 uA maximum, which is critical for battery-powered designs. The integrated ESD protection is rated above 2000 V per the Human-Body Model (HBM), reducing the need for external transient-suppression diodes on the USB lines. The wide 1 GHz-class bandwidth allows USB 2.0 signals to pass with minimum edge and phase distortion, preserving eye-diagram margin at 480 Mbps. As an AEC-Q100 qualified device (TS3USB221A-Q1 family), it is validated for automotive ambient temperature ranges and supports automotive USB hubs and charging ports. Typical applications include automotive USB hubs and infotainment ports, cell phones and handsets, digital cameras, and notebooks where a hub or controller has limited USB I/Os that must be multiplexed between connectors. Design consideration: keep the switch close to the USB connector, match the differential pair layout through the device, and verify that the select (S) and enable (OE) logic levels are compatible with your controller GPIO; unused channel stubs should be minimized to preserve signal integrity. This page synthesizes distributor listings, cross-reference tooling, and drop-in alternative analysis not found in the manufacturer datasheet alone.
TUSB216RWBR - 3-Channel 480 Mbps USB Signal Conditioner | TI
Texas Instruments TUSB216RWBR is a 3-channel USB 2.0 high-speed signal conditioner rated for 480 Mbps operation and supplied in a 12-pin X2QFN package measuring 1.6 mm by 1.6 mm. The device includes USB Battery Charging Specification controller functions and is positioned for compact systems whose USB channels experience insertion loss or capacitive loading. A USB high-speed signal conditioner is an interface IC placed between a USB controller and a connector or cable to restore signal integrity. USB 2.0 high-speed data travels as differential pairs, and losses caused by capacitance, resistance, and intersymbol interference can degrade edge quality. The TUSB216 compensates high-speed channel loss while leaving USB low-speed and full-speed signal characteristics unaltered. This makes it part of the broader USB interface IC and signal-conditioning hierarchy. Three active channels allow the device to condition multiple USB data connections within compact equipment. The 480 Mbps operating class corresponds to USB 2.0 high speed, while the integrated DCP and CDP controller functions support downstream and charging-port behavior. Compatibility with USB On-The-Go and Battery Charging specifications broadens its use in portable-device, docking, and peripheral designs. The package keeps the footprint to 1.6 mm by 1.6 mm for space-constrained boards. The TUSB216 uses a patented signal-conditioning approach for USB high-speed channels. According to the manufacturer datasheet, it compensates intersymbol-interference signal loss in the transmission channel, including the effects of capacitive AC loss and resistive DC loss. The low-speed and full-speed paths remain unchanged, which helps the device preserve compatibility with the broader USB 2.0 specification while correcting the higher-speed data path. Typical applications include USB Type-C and legacy USB-A docking systems, portable electronics, charging docks, industrial peripherals, test equipment, and USB-to-USB repeaters. It is particularly useful when connector placement, cable length, protection components, or PCB routing create a lossy USB 2.0 channel. Its compact package also makes it suitable for multiport devices where three conditioned channels conserve board area. PCB implementation should preserve controlled-impedance routing through the conditioner and minimize stub branches between the USB controller, TUSB216RWBR, and connector. Bypass capacitors should be placed close to the supply pins, and the ground-return path should remain continuous. Designers should verify eye diagrams and compliance masks across the intended cable length, connector, and enclosure configuration rather than assuming compensation is universal. This page consolidates the device architecture, channel-rate information, package constraints, application guidance, and design considerations needed for USB 2.0 signal-integrity planning. It also distinguishes the TUSB216 family from related TI USB signal-conditioner parts and highlights the engineering checks required before treating any candidate as a board-level drop-in replacement.