6EDL7141XUMA1 vs TLE94104EPXUMA1 Comparaison
Comparaison détaillée côte à côte de 6EDL7141XUMA1 par Infineon et TLE94104EPXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | 6EDL7141XUMA1 | TLE94104EPXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,05 | $1,70 |
| Product Type | Three-phase gate driver IC (smart gate driver) | Half-Bridge (4) Driver for DC Motors |
| Topologie | Three half-bridge drivers (high-side + low-side) | Quad Half-Bridge (4x N-channel high-side + low-side MOSFETs integrated) |
| Tension d'alimentation de fonctionnement | 5.5 V to 60 V (recommended) | — |
| Peak Gate Drive Current | 1.5 A source / 1.5 A sink | — |
| Number of Half-Bridges | 3 | — |
| Drive Type | Non-Inverting | — |
| Programmable Drive Voltage | Yes (configurable via SPI) | — |
| Integrated Current Sense Amplifiers | 3 (bi-directional low-side, programmable gain) | — |
| R_DSON Sensing | Supported via internal phase-node connections | — |
| Current Sense Output Compatibility | 3.3 V and 5 V logic | — |
| Communication Interface | SPI (digital configuration, >50 parameters) | — |
| Integrated Bootstrap Diodes | Yes | — |
| Integrated Charge Pump | Yes | — |
| Boîtier | PG-VQFN-48-78 (7x7 mm power QFN with exposed pad) | PG-TSDSO-14 (14-pin with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | 2A |
| Statut RoHS | Compliant (per Infineon product page) | Compliant |
| Logic Supply Voltage (VCC) | — | 3 V to 5.5 V |
| Motor Supply Voltage (VS) | — | 5.5 V to 20 V |
| Configuration de sortie | — | Half-Bridge (4) - parallelable to 2x H-Bridge |
| Interface | — | 16-bit SPI, daisy-chain capable |
| Température de jonction en fonctionnement | — | -40 C to +150 C |
| Protection Features | — | Over-Temperature, Over-Current, Short-Circuit, Open-Load Detection |
| Nombre de sorties | — | 4 half-bridge channels |
| Automotive Qualification | — | AEC-Q100 grade-0 capable (Tj = 150 C) |
| Slew Rate Control | — | Configurable via SPI |