AD5142ABCPZ10-RL7 vs AD5142WBCPZ10-RL7 Comparaison
Comparaison détaillée côte à côte de AD5142ABCPZ10-RL7 par Analog Devices et AD5142WBCPZ10-RL7 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ ActifAnalog Devices
AD5142WBCPZ10-RL7 - 10kΩ Dual 256-Tap SPI NVM DigiPot | ADI
AD5142WBCPZ10-RL7 ✓ ActifComparaison des spécifications
| Paramètre | AD5142ABCPZ10-RL7 | AD5142WBCPZ10-RL7 |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Amplifier ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,36 | $3,25 |
| Number of Potentiometers | 2 (dual) | — |
| Nominal End-to-End Resistance (R-AB) | 10 kΩ | — |
| Number of Taps | 256 positions | 256 per channel |
| Interface | I²C-compatible (SCL up to 3 MHz) | — |
| Type de mémoire | Non-volatile EEPROM | — |
| Resistor Tolerance | ±8% | ±8% |
| Temperature Coefficient | 35 ppm/°C nominal | — |
| Wiper Resistance (ends of array) | 40 Ω typical | — |
| Continuous Current on A/B/W Pins | ±6 mA max | — |
| Supply Voltage (VDD) | 2.3 V to 5.5 V | 2.3 V to 5.5 V (single supply) |
| Température de fonctionnement | -40 °C to +125 °C | — |
| Boîtier | 16-lead LFCSP (3 mm × 3 mm) with EP | 16-LFCSP (3 mm × 3 mm) with exposed pad (CP-16-22) |
| Type de montage | Surface Mount | Surface Mount |
| Taper | Linear | — |
| Statut RoHS | Compliant | Compliant |
| AEC-Q100 Qualification | Not AEC-Q100 qualified (industrial grade) | — |
| Soft Reset | Yes (loads default wiper setting) | — |
| Fonction | — | Digital Potentiometer (Dual, Nonvolatile) |
| Number of Channels | — | 2 |
| End-to-End Resistance (R-AB) | — | 10 kΩ nominal |
| Wiper Resistance | — | [DATA_NEEDED: wiper resistance typical] |
| Digital Interface | — | SPI (serial peripheral interface), 16-bit command word |
| Maximum SPI Clock | — | 50 MHz |
| Terminal Current (A, B, W pins) | — | ±6 mA |
| Plage de température de fonctionnement | — | -40 °C to +125 °C (AEC-Q100 automotive Grade 1) |
| Nonvolatile Memory Write Cycles | — | 50,000 cycles typical |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |
| Automotive Qualification | — | AEC-Q100 Grade 1 (WB suffix) |
| Lead-Free / Halogen-Free | — | Yes |
| A/B/W Terminal Voltage Range | — | VSS to VDD (rail-to-rail) |
| Channel-to-Channel Matching | — | [DATA_NEEDED: matching tolerance] |