AD5142ABCPZ10-RL7 vs AD5142WBCPZ10-RL7 비교
다음의 상세 나란히 비교: AD5142ABCPZ10-RL7 제조: Analog Devices 및 AD5142WBCPZ10-RL7 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ 활성사양 비교
| 파라미터 | AD5142ABCPZ10-RL7 | AD5142WBCPZ10-RL7 |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Amplifier ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $3.36 | $3.25 |
| Number of Potentiometers | 2 (dual) | — |
| Nominal End-to-End Resistance (R-AB) | 10 kΩ | — |
| Number of Taps | 256 positions | 256 per channel |
| 인터페이스 | I²C-compatible (SCL up to 3 MHz) | — |
| 메모리 유형 | Non-volatile EEPROM | — |
| Resistor Tolerance | ±8% | ±8% |
| Temperature Coefficient | 35 ppm/°C nominal | — |
| Wiper Resistance (ends of array) | 40 Ω typical | — |
| Continuous Current on A/B/W Pins | ±6 mA max | — |
| Supply Voltage (VDD) | 2.3 V to 5.5 V | 2.3 V to 5.5 V (single supply) |
| 동작 온도 | -40 °C to +125 °C | — |
| 패키지 | 16-lead LFCSP (3 mm × 3 mm) with EP | 16-LFCSP (3 mm × 3 mm) with exposed pad (CP-16-22) |
| 실장 유형 | Surface Mount | Surface Mount |
| Taper | Linear | — |
| RoHS 상태 | Compliant | Compliant |
| AEC-Q100 Qualification | Not AEC-Q100 qualified (industrial grade) | — |
| Soft Reset | Yes (loads default wiper setting) | — |
| 기능 | — | Digital Potentiometer (Dual, Nonvolatile) |
| Number of Channels | — | 2 |
| End-to-End Resistance (R-AB) | — | 10 kΩ nominal |
| Wiper Resistance | — | [DATA_NEEDED: wiper resistance typical] |
| Digital Interface | — | SPI (serial peripheral interface), 16-bit command word |
| Maximum SPI Clock | — | 50 MHz |
| Terminal Current (A, B, W pins) | — | ±6 mA |
| 동작 온도 범위 | — | -40 °C to +125 °C (AEC-Q100 automotive Grade 1) |
| Nonvolatile Memory Write Cycles | — | 50,000 cycles typical |
| MSL 레벨 | — | [DATA_NEEDED: MSL rating] |
| Automotive Qualification | — | AEC-Q100 Grade 1 (WB suffix) |
| Lead-Free / Halogen-Free | — | Yes |
| A/B/W Terminal Voltage Range | — | VSS to VDD (rail-to-rail) |
| Channel-to-Channel Matching | — | [DATA_NEEDED: matching tolerance] |