AD621ANZ vs INA114AP Comparaison
Comparaison détaillée côte à côte de AD621ANZ par Analog Devices et INA114AP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA114AP - 1MHz Precision Instrumentation Amplifier | Texas Instruments
INA114AP ✓ ActifComparaison des spécifications
| Paramètre | AD621ANZ | INA114AP |
|---|---|---|
| Marque | Analog Devices | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 circuit | 1 circuit |
| Boîtier | 8-pin PDIP (0.300 inch, 7.62 mm pitch) | 8-pin PDIP |
| Type de montage | Through-hole | Through-hole |
| Packaging Type | Tube | — |
| Small-Signal Bandwidth | 800 kHz at -3 dB | — |
| Slew Rate | 1.2 V/µs | — |
| Maximum Supply Current | 1.3 mA | — |
| Input Bias Current | 500 pA | — |
| Input Offset Voltage | 75 µV | — |
| Plage de température de fonctionnement | -40°C to +85°C | -40°C to +85°C |
| Type de sortie | [DATA_NEEDED: output type] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | ±18 V |
| Gain Range | [DATA_NEEDED: gain range] | — |
| Input Common-Mode Rejection | [DATA_NEEDED: input common-mode rejection] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| Halogen-Free Status | Compliant | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| Amplifier Type | — | Precision instrumentation amplifier |
| Gain-Bandwidth Product | — | 1 MHz |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Offset Voltage Drift | — | 0.25 µV/°C |
| Input Noise Density | — | 11 nV/√Hz |
| Maximum Input Bias Current | — | 2 nA |
| Minimum Common-Mode Rejection | — | 115 dB |
| Input Overvoltage Protection | — | ±40 V |
| Maximum Quiescent Current | — | 3 mA |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Long-Term Stability | — | Specified as excellent long-term stability |
| Compliance | — | RoHS and REACH status not stated |