AD621ANZ vs INA114AP तुलना
विस्तृत दोनों ओर की तुलना AD621ANZ द्वारा Analog Devices और INA114AP द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
INA114AP - 1MHz Precision Instrumentation Amplifier | Texas Instruments
INA114AP ✓ सक्रियविशेषता तुलना
| पैरामीटर | AD621ANZ | INA114AP |
|---|---|---|
| ब्रांड | Analog Devices | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 circuit | 1 circuit |
| पैकेज | 8-pin PDIP (0.300 inch, 7.62 mm pitch) | 8-pin PDIP |
| माउंटिंग प्रकार | Through-hole | Through-hole |
| Packaging Type | Tube | — |
| Small-Signal Bandwidth | 800 kHz at -3 dB | — |
| Slew Rate | 1.2 V/µs | — |
| Maximum Supply Current | 1.3 mA | — |
| Input Bias Current | 500 pA | — |
| Input Offset Voltage | 75 µV | — |
| ऑपरेटिंग तापमान रेंज | -40°C to +85°C | -40°C to +85°C |
| आउटपुट प्रकार | [DATA_NEEDED: output type] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | ±18 V |
| Gain Range | [DATA_NEEDED: gain range] | — |
| Input Common-Mode Rejection | [DATA_NEEDED: input common-mode rejection] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| Halogen-Free Status | Compliant | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | — |
| Amplifier Type | — | Precision instrumentation amplifier |
| Gain-Bandwidth Product | — | 1 MHz |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Offset Voltage Drift | — | 0.25 µV/°C |
| Input Noise Density | — | 11 nV/√Hz |
| Maximum Input Bias Current | — | 2 nA |
| Minimum Common-Mode Rejection | — | 115 dB |
| Input Overvoltage Protection | — | ±40 V |
| Maximum Quiescent Current | — | 3 mA |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Long-Term Stability | — | Specified as excellent long-term stability |
| Compliance | — | RoHS and REACH status not stated |