AD623ARMZ vs AD623ANZ Comparaison
Comparaison détaillée côte à côte de AD623ARMZ par Analog Devices et AD623ANZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
AD623ARMZ - 3V-12V Rail-to-Rail Instrumentation Amp | Analog Devices
AD623ARMZ ✓ ActifComparaison des spécifications
| Paramètre | AD623ARMZ | AD623ANZ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Single-supply instrumentation amplifier (IN-AMP) | Instrumentation amplifier |
| Number of Channels | 1 channel | — |
| Supply Voltage Range | 3 V to 12 V (2.7 V to 12 V per manufacturer product page) | 2.7 V to 12 V |
| Output Swing | Rail-to-rail output | Rail-to-rail |
| Gain Range | 1 to 1000, set by a single external resistor | — |
| 3 dB Bandwidth (G = 1) | 800 kHz | — |
| Slew Rate | 300 mV/us | — |
| Boîtier | 8-lead MSOP (RM-8), surface mount | 8-PDIP |
| Pin Configuration | 8-lead industry-standard in-amp pinout | Industry-standard 8-lead instrumentation-amplifier configuration |
| REF Pin Function | Output reference / offset input | — |
| MSL | MSL 1 (unlimited floor life) | — |
| RoHS Compliance | RoHS3 compliant | — |
| REACH Status | Unaffected | Unknown |
| Plage de température de fonctionnement | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage, typical and maximum] | — |
| CMRR | [DATA_NEEDED: CMRR at G = 1 and G = 100] | — |
| Courant d'alimentation | [DATA_NEEDED: quiescent supply current] | — |
| Input Noise Density | [DATA_NEEDED: input noise density in nV/rt-Hz] | [DATA_NEEDED: input noise density] |
| Power Supply Rejection | [DATA_NEEDED: PSRR at G = 1] | — |
| Gain Error | [DATA_NEEDED: gain error at G = 1] | — |
| Number of Circuits | — | 1 circuit |
| Single-Supply Configuration | — | 3 V to 12 V |
| Dual-Supply Operation | — | Supported |
| Gain Programming | — | Single external gain-set resistor |
| Lead Count | — | 8 leads |
| Input Signal | — | Differential |
| Common-Mode Handling | — | Instrumentation-amplifier input |
| Power Class | — | Low-cost, low-power instrumentation amplifier |
| Product Class | — | Rail-to-rail instrumentation amplifier |
| Statut RoHS | — | Unknown |
| AEC-Q100 Qualification | — | Not applicable |
| Gain Bandwidth | — | [DATA_NEEDED: gain bandwidth] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |