AD623ARMZ vs AD623ANZ So sánh
So sánh chi tiết song song của AD623ARMZ bằng Analog Devices và AD623ANZ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Analog Devices
AD623ARMZ - 3V-12V Rail-to-Rail Instrumentation Amp | Analog Devices
AD623ARMZ ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | AD623ARMZ | AD623ANZ |
|---|---|---|
| Thương hiệu | Analog Devices | Analog Devices |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Single-supply instrumentation amplifier (IN-AMP) | Instrumentation amplifier |
| Number of Channels | 1 channel | — |
| Supply Voltage Range | 3 V to 12 V (2.7 V to 12 V per manufacturer product page) | 2.7 V to 12 V |
| Output Swing | Rail-to-rail output | Rail-to-rail |
| Gain Range | 1 to 1000, set by a single external resistor | — |
| 3 dB Bandwidth (G = 1) | 800 kHz | — |
| Slew Rate | 300 mV/us | — |
| Hộp | 8-lead MSOP (RM-8), surface mount | 8-PDIP |
| Pin Configuration | 8-lead industry-standard in-amp pinout | Industry-standard 8-lead instrumentation-amplifier configuration |
| REF Pin Function | Output reference / offset input | — |
| MSL | MSL 1 (unlimited floor life) | — |
| RoHS Compliance | RoHS3 compliant | — |
| REACH Status | Unaffected | Unknown |
| Khoảng nhiệt độ hoạt động | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage, typical and maximum] | — |
| CMRR | [DATA_NEEDED: CMRR at G = 1 and G = 100] | — |
| Điện áp cung cấp | [DATA_NEEDED: quiescent supply current] | — |
| Input Noise Density | [DATA_NEEDED: input noise density in nV/rt-Hz] | [DATA_NEEDED: input noise density] |
| Power Supply Rejection | [DATA_NEEDED: PSRR at G = 1] | — |
| Gain Error | [DATA_NEEDED: gain error at G = 1] | — |
| Number of Circuits | — | 1 circuit |
| Single-Supply Configuration | — | 3 V to 12 V |
| Dual-Supply Operation | — | Supported |
| Gain Programming | — | Single external gain-set resistor |
| Lead Count | — | 8 leads |
| Input Signal | — | Differential |
| Common-Mode Handling | — | Instrumentation-amplifier input |
| Power Class | — | Low-cost, low-power instrumentation amplifier |
| Product Class | — | Rail-to-rail instrumentation amplifier |
| Trạng thái RoHS | — | Unknown |
| AEC-Q100 Qualification | — | Not applicable |
| Gain Bandwidth | — | [DATA_NEEDED: gain bandwidth] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |