AD677KN vs AD677JN Comparaison
Comparaison détaillée côte à côte de AD677KN par Analog Devices et AD677JN par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | AD677KN | AD677JN |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Dernier achat | Dernier achat |
| Résolution | 16 bit | 16 bit |
| Fréquence d'échantillonnage | 100 kSPS | — |
| Total Conversion Time | 10 us | 10 µs |
| Converter Architecture | Switched-capacitor charge redistribution | — |
| Output Format | Serial, 16 bit | — |
| Input Channels | 1 channel | — |
| Sample-and-Hold Function | On-chip, autocalibrating | — |
| Missing Codes | 0 LSB | No missing codes |
| Total Harmonic Distortion | 99 dB | -99 dB |
| Signal-to-Noise Plus Distortion | 92 dB | 92 dB |
| Full-Power Bandwidth | 1 MHz | 1 MHz |
| Boîtier | 16-pin narrow plastic DIP (PDIP) | 16-pin narrow plastic DIP |
| Type de montage | Through-hole insertion | Through-hole |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Analog Input Range | [DATA_NEEDED: analog input voltage range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Tension de référence | [DATA_NEEDED: reference voltage] | — |
| Digital Interface Levels | [DATA_NEEDED: digital interface logic levels] | — |
| Power Consumption | [DATA_NEEDED: typical and maximum power consumption] | — |
| Statut RoHS | [DATA_NEEDED: AD677KN RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Conversion Rate | — | 100 kSPS |
| Type de sortie | — | Serial output |
| Architecture | — | Switched-capacitor / charge-redistribution ADC |
| Sample-and-Hold | — | On-chip sample-and-hold function |
| Analog Supply | — | +5 V and +12 V |
| Digital Supply | — | VDD supply; exact operating value [DATA_NEEDED: VDD operating voltage range] |
| Typical Power Consumption, 10 V Reference | — | 450 mW during conversion |
| Typical Power Consumption, 5 V Reference | — | 360 mW during conversion |
| Ground Sensing | — | Remote analog-ground sense |
| Autocalibration | — | On-chip autocalibration |
| REACH Status | — | [DATA_NEEDED: REACH status] |