AD677KN vs AD677JN तुलना
विस्तृत दोनों ओर की तुलना AD677KN द्वारा Analog Devices और AD677JN द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | AD677KN | AD677JN |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | अंतिम बार खरीदें | अंतिम बार खरीदें |
| रेज़ोल्यूशन | 16 bit | 16 bit |
| सैंपलिंग रेट | 100 kSPS | — |
| Total Conversion Time | 10 us | 10 µs |
| Converter Architecture | Switched-capacitor charge redistribution | — |
| Output Format | Serial, 16 bit | — |
| Input Channels | 1 channel | — |
| Sample-and-Hold Function | On-chip, autocalibrating | — |
| Missing Codes | 0 LSB | No missing codes |
| Total Harmonic Distortion | 99 dB | -99 dB |
| Signal-to-Noise Plus Distortion | 92 dB | 92 dB |
| Full-Power Bandwidth | 1 MHz | 1 MHz |
| पैकेज | 16-pin narrow plastic DIP (PDIP) | 16-pin narrow plastic DIP |
| माउंटिंग प्रकार | Through-hole insertion | Through-hole |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Analog Input Range | [DATA_NEEDED: analog input voltage range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| रेफ़रेंस वोल्टेज | [DATA_NEEDED: reference voltage] | — |
| Digital Interface Levels | [DATA_NEEDED: digital interface logic levels] | — |
| Power Consumption | [DATA_NEEDED: typical and maximum power consumption] | — |
| RoHS स्थिति | [DATA_NEEDED: AD677KN RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Conversion Rate | — | 100 kSPS |
| आउटपुट प्रकार | — | Serial output |
| Architecture | — | Switched-capacitor / charge-redistribution ADC |
| Sample-and-Hold | — | On-chip sample-and-hold function |
| Analog Supply | — | +5 V and +12 V |
| Digital Supply | — | VDD supply; exact operating value [DATA_NEEDED: VDD operating voltage range] |
| Typical Power Consumption, 10 V Reference | — | 450 mW during conversion |
| Typical Power Consumption, 5 V Reference | — | 360 mW during conversion |
| Ground Sensing | — | Remote analog-ground sense |
| Autocalibration | — | On-chip autocalibration |
| REACH Status | — | [DATA_NEEDED: REACH status] |